Once the payroll data is transfered to GL,how is the emp paid?

How is the employee salary issued through which module ?
Also the following i sawa in help can some one explain me how it works
Creating Manual Payments
Use the External/Manual Payments page to record cash or cheque/check payments to employees from external sources or petty cash.
The page enables you to record details of each payment.
All your comments are welcomed!

You create a new consolidation set called let's say "Special Payment"
create database item for the eleements to pay , after gl process
create a assignment set based on this database item > 0 in the criteria
create an element set for those elements
enter your element entry for those elements
run the payroll run , consolidation set = "Special Payment", and enter the newly created assignment set and element set.
run your prepayemnts with the consolidation set = "Special Payment"
and so on ..
regards,
zamora

Similar Messages

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Issue on transfering of payroll data

hii sap guru's,
i am new in sap hr..
my client has a requirement in which we need to transfer payroll data from the non-SAP system to the SAP system.
i have to store the payroll data into the RT table of SAP
can i use the option: IMG -- transfer legacy data.
how is the procedure for it? if it is wrong, what is the correct and easy way to do it?
this is urgent guys...please help
thanks,
regards,
sam

Use LSMW Record/Bapi method.
If it is middle year go live
look at this tables T588B ,T588C ,T5U8C and transfer your Payroll results,taxes ,arrears.
--- Bob Radi

Scehdule Line Date getting change to future date once the Sales Order is saved

Hello Experts,
Good Morning to you all,
This is with respect to the Issue we are facing for the Orders having Product Allocation on multiple materials. Please find enclosed the detials below.
Issue : Scehdule Line Date getting change to future date once the Sales Order is saved. These Order's are having Product Allocation on multiple materials.
Description:
We have implemented Product Allocation few months back.
We have Product Allocation on multiple materials which are in demand and has been reserved for the Customers of different PA behaviors.
When we are trying to create the Sales Orders for the normal customer who is not on Product Allocation. The Order Schedule Line is getting changed to future date once the Sales Order is saved after initial creation.
These Order's are having materials of Product Allocation.
I have enclosed the sample screen shot of the error we are getting which saving the Sales Order and also the Order Schedule Line screen shot showing future date.
Error Message : There may be Product Over Allocation in Delivery Group 001.
Message No : VV023
This is a random behavior we are coming across and out of 10 Order 2 or 3 Orders is getting this Issue.
Please share your inputs how to rack this Issue.
Your suggestions will be highly appreciated.
I am unable to upload the attacments dont know what the reason.
Thanks,
Farhan.

Check whether you need to carry out the coding corrections as recommended in the following note:-
Note 52067 - Message VV023/VV024, but no prod.alloc.processing
But I wonder this is for older versions and not sure whether this would help you to overcome from the issue.
G. Lakshmipathi

How can I tell if data was transferred to my MacBook Pro after the Migration Assistant process was stopped?

I began Migration Assistant and after about 4hrs into the transfer I decided to quit. How do I find out if any data was transferred to my Macbook Pro from my Windows 7 pc?

iMac Obsessed wrote:
I've had my MacBook Pro Retina since the 17th and am only now realising that my firewall was not on. I've already connected to a network via ethernet at my job so that I can have access to the internet. How can I tell if my personal info is safe?
As long as you are behind a router, you don't need to have your firewall turned on at all, in fact it probably slows your computer and/or internet connection down a bit. The only time you need it is to either protect yourself against intrusion from others on your local network or if you hook your computer directly to a cable / DSL modem. See Thomas Reed's Do I Need a Firewall?

HT1386 Dear Sir / Madam. I have iphone 3 & 4. 1247 contacts is in iphone 4. When I synsing contacts not transfering. But other data is transferred. How can I transfer the contacts to iphone 3. Thank you. Dr.Jegamohan.

Dear Sir / Madam.
I have iphone 3 & 4. 1247 contacts is in iphone 4. When I synsing contacts are not transfering. But other data is transferred.
How can I transfer the contacts to iphone 3.
Thank you.
Dr.Jegamohan.

You are syncing contacts or trying to sync contacts how - direct with a supported address book app on your computer via the iTunes sync process, which is selected under the Info tab for the iPhone sync preferences with iTunes?

How the CRM data is transferred (initial load) to TREX server in CRM EHP1

Hi Guru's
I am working on HV segmentation first time and would like to know, how the CRM data is transferred (initial load) to TREX server in CRM EHP1, if we create the 'Data source for HV - Attribute set / Inforset' will that transfer the data to TREX server or do we need to perform Initial load by execute by batch program / Transaction.
For the update (delta load) is the program : CRM_MKTTG_TREX_UPDATE to update the BP data, can we also add other objects (Transactional data) for delta load.
Regards,
Ajay Kumar

Hi Ajay,
Yes you are right the Report CRM_MKTTG_TREX_UPDATE is used for Full load (inital load) for HV segmentation data.
Both Full and Delta load is suggested to be performed in background. You can use the options "Business partners" and "Marketing permissions". For BP's you can use Delta upload with further options:
Synchonize Business Partners Beforehand
Force Update
Offset for Delta Table Entries (in sec.)
You can also "Define Delta Source Objects for High Volume Segmentation" in SPRO > MKT > HV segmentation.
Here you can set relevant data source objects that is available for delta upload.
For more details refer to documentation next to the customization entry.
Hope this information helps you.
Regards,
Anup

I was wondering, once the 1gb free data is applied to the account, can you downgrade your plan? If so, how low can you drop the data before the promo is affected?

I was wondering, once the 1gb free data is applied to the account, can you downgrade your plan? If so, how low can you drop the data before the promo is affected?

I beleive you have to keep your PAID data of at least 1gb

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

Using Acrobat Pro how do I lock the fillable fields once the data is collected?

Using Acrobat Pro how do I lock the fillable fields once the data is collected?

Hi,
Have a look at Paul's LockAllFields solution. You can download it in Paul's post here: http://forums.adobe.com/message/3168183#3168183.
I have a version of it here as well: http://assure.ly/yDtfsM.
Hope that helps,
Niall

HT4859 If I got a new iPhone and backed up the data from the old one, it should show up once the new one is set up right? Does an "incomplete" status mean it did not back up and can not be restored to the new iPhone?

If I got a new iPhone and backed up the date from the old one, it should show up once the new one is set up right?
And does an "incomplete" status on iCloud mean it can't be restored to the new iPhone?
Help please

What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

ALE error while posting payroll data

Hi all,
We are trying to set up payroll posting via ALE interface. We have done the following settings
1. Distribution model setup with filters on for standard bapi's
2. Partner profile setup
3. RFC destination setup
When we try to post payroll data,it was returned with the following errors
       RFC destination is not maintained for object BUS6001 and method PRECHECKPAYROLLACCOUNTASSIGN
       The account assignment objects could not be checked
       RFC destination is not maintained for object BUS6004 and method CHECK
       The G/L account could not be checked
We verified RFC destination and it is working fine. I have searched all possible links in SCN, but unable to get the solution.
Can someone help in this issue?

Hi,
Using tcode pc_payresult please check whether the off-cycle payroll is executed again in period 06-2010. If yes then try to post off-cycle payroll separately (PC00_M99_CIPE - Create Posting Run) by entering "Off-Cycle Payroll Run" parameters. May be you will get an error while posting this off-cycle payroll because this payroll is already posted. In this case you will have to reverse the existing off-cycle posting and then post off-cycle payroll again.
Once off-cycle payroll is posted, then you try to post normal monthly payroll.
I hope your problem will be solved by doing the above work out.
Regards,
Waqas Rashid

Updated to iOS 7, when my phone came on for the first time I could see I had 2 new viber messages. When I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone.

Hi,
I have only just upgraded to iOS 7 on my iPhone 4 and am having a problem with Viber. When my phone came on for the first time after the update I could see I had 2 new viber messages, when I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone...
I still have an itunes backup of my phone just before the update, I restored it to this backup, followed the same process and now viber will not even work (the access code wont sms to me and the phone call option for recieving this code also come up with some error about not being able to do this at this time).
I have been able to access viber using another phone number (I have two sims which I use as I am currently overseas in south korea, my referenced australian sim has worked previously on viber overseas and I definently do have roaming on) but again I have no message history.
So to questions:
1) Why is my activation not working under my referenced australian number?
2) Can I recover all my message history which should be saved in my itunes backup? I am willing to revert to this backup state again if needed.
Please help.
Thanks.

Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

Payroll Data Extraction - 0HR_PY_1 and BIWMONTH

Hi, I'm hoping someone can provide some clarification on an issue with a payroll data extractor please. I've searched the forums, and looked at the Business Content documentation, but I'm still not clear on one point.
The extractor 0HR_PY_1 (Payroll data) has two selection fields in our version of the DataSource, and these are PERNR and BIWMONTH. It is the BIWMONTH parameter for which I am seeking clarification. Does this allow data to be extracted based upon the calendar month/year that the data was posted into SAP, or does it relate specifically to the calendar year/month of the actual payroll result data. So, if a retrospective payroll change is done in Oct 2010, to an April payroll result, will BIWMONTH contain 10.2010 or 04.2010?
Any help on this would be greatly appreciated.
Best wishes,
Jeff.

Month of the Posting date. in your example 10/2010

Re: Schedule a WEBI report once the BW process chain loading is completed

Hello Guys,
I want to schedule a webi report once the process chain in bw is sucessfully completed .Did any one face this situation before ?
is it possible to trigger a event from bw to webi and schedule a webi report to end users once the process chain loads the data into cube sucessfully
i searched sdn but didnt find any help related to this topic
can any one help me with the above issue asap
step 1 : Trigger the process chain load the data till cube
step 2 : add a process type whcih has program - at the end of the process chain
step 3 : trigger a event in BO inorder to schedule a webi report to end users from this program ? how to do it
i want to know how to trigger a event in bo from bw using r/3 program inorder to schedule a WEBI report
any help on this topic is highly appreciated

Hi Venkat,
At present, there is no standard functionality available in SAP NetWeaver 2004s BW/BOBJ that offers this integration and automation.But you can do it as given in following link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09033ab-4593-2e10-5fa0-b23bcfa1575a?QuickLink=index&overridelayout=true&51887500308956
Regards,
Pushkar Dhale

Once the payroll data is transfered to GL,how is the emp paid?

Similar Messages

Maybe you are looking for