One column in check remittance of smartform not lined up properly...

I created a check form, and it has 4 columns in the remittance advice portion of the check.  One of the columns is not lining up properly, and is about a half line below where it needs to be lined up, anybody have ideas?

Hi Daniel,
Try to display the columns using the patterns for the line types in the template/table accordingly.
Regards,
Sravanthi

Similar Messages

  • The printer is not lined up properly on portrait orientation.

    HP Photo smart 7520  The printer is not lined up properly on portrait orientation. The margin at the top is too high and chops off all but the bottom portion of the letters on the website address. On Word all of my documents are set to close to the top with a larger margin at the bottom than the set up calls for.
    Windows 7 Professional

    Please check the paper size loaded in the printer input tray, the size requested from application (document size) and the paper size configured in the printer drivers.
    Please mark the post that solves your problem as Accepted Solution
    Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
    (Although I am an HP employee, I am speaking for myself and not for HP)

  • When I import a text file(comma separated )into a numbers spread sheet all the data goes into one column. Why does the text not go into separate columns based on the commas.

    When I import a text file(comma separated) into a numbers spreadsheet all the data goes into one column instead of individual columns based on the comma separators.  Excel allows you to do this during the import..  Is there a way to accomplish this in numbers without opening it in Excel and the importing into Numbers.

    Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
    (I don't have an iPad, so I don't know the iOS answer.)

  • Text Not Lining Up Properly in Fillable Form | Acrobat 9 Pro

    I have a number of documents that were created in MS Word and then I converted them to PDF through Adobe Acrobat 9 Pro. A number of those documents have text fields that the end user will type their data into - example: a message area on a fax cover sheet.
    The original Word document has that area lined such as this:
    When that area (as shown above) is converted as a field in the "add fields" to the form in Adobe Acrobat I am deleting out the individual fields Adobe "detects" and instead making it one large content box.
    Under properties I have "multi-line" and "scroll long text" selected.
    Now the problem....for some unknown reason....some fields are working perfectly that when we type into the PDF fillin form that the text that is typed lines up perfectly with the lines (as shown above). In other instances it's not lining up at all.
    I have played with font size, font type, spacing on the original Word document.I have scoured the internet and the forums with no success (either no one else is asking or I'm not using the proper search terms).
    Can anyone help me out or point me in the right direction?
    I've also included a screenshot of the document so you can see the wackiness.

    You don't have direct control of the leading of a multiline text field. A common approach is to control the background color of the field with JavaScript since the lines are not really needed when the field is used in Reader/Acrobat. They may be useful when using the form by hand. For more information, see the posts by Max in this topic: http://acrobatusers.com/forum/forms-acrobat/how-do-i-use-multi-lined-text-fields-over-prin ted-line-area-existing-form

  • Why is the grid not lining up properly?

    relevant code:
         private static final int SCREEN_WIDTH = 640;
         private static final int SCREEN_HEIGHT = 640;
         private final int[][] a;
         private final int width;
         private final int height;
         private final int boxSizeX;
         private final int boxSizeY;
         private final int startX;
         private final int startY;
         private final char[]answer;
         private boolean userAnswer;
    public project3main(int[][] array, int boxsize, char[]answer, boolean userAnswer) {
              this.a=array;//the array representing the walls
              this.width = a[0].length;
              this.height = a.length;
              this.answer = answer;
              this.setPreferredSize(new Dimension(SCREEN_WIDTH,SCREEN_HEIGHT));
              this.boxSizeX = (SCREEN_WIDTH)/(width+2);
              this.boxSizeY = (SCREEN_HEIGHT)/(height+2);
              this.startX = boxSizeX/2;
              this.startY = boxSizeY/2;
              this.userAnswer = userAnswer;
         public void paintComponent(Graphics g) {
              //draw the ceiling
                   this.a[height-1][this.a[height-1].length-1] = SOUTH_WALL;
                   g.drawLine(this.boxSizeX, this.boxSizeY, (SCREEN_WIDTH-(this.boxSizeX)), this.boxSizeY);     
                   g.drawLine(this.boxSizeX, this.boxSizeY+this.boxSizeY, this.boxSizeX, (SCREEN_HEIGHT-(this.boxSizeY)));     
                   int currY=this.boxSizeY;
                   int currX=this.boxSizeX;
                   for(int i=0;i<this.height;i++)
                        currY = (this.boxSizeY)*(i+1);
                        for(int j=0;j<this.width;j++)
                             currX = (this.boxSizeX)*(j+1);
                             if(a[i][j] == EAST_WALL)
                                  g.drawLine(currX+this.boxSizeX, currY, currX+this.boxSizeX, currY+this.boxSizeY);
                             else if(a[i][j] == SOUTH_EAST_WALL)
                                  g.drawLine(currX+this.boxSizeX, currY, currX+this.boxSizeX, currY+this.boxSizeY);
                                  g.drawLine(currX, currY+this.boxSizeY, currX+this.boxSizeX, currY+this.boxSizeY);
                             else if(a[i][j] == SOUTH_WALL)
                                  g.drawLine(currX, currY+this.boxSizeY, currX+this.boxSizeX, currY+this.boxSizeY);
                   }basically, this takes in a matrix which is filled with integers that represent if each node has a south, east, or a combination of the two.
    It creates a standard box-size relative to the width of the screen and the height of the screen (set at 640 for each)
    It then draws the ceiling and the left wall.
    However, the ceiling and the left wall do not line up. That is, the outside wall does not occur at the rightmost point of the ceilling.
    Can anyone see why just by looking at the code?
    further code furnished upon request
    Edited by: thenextbesthang on May 4, 2008 10:03 AM

    thenextbesthang wrote:
    how do you post a jframe?? You just make a minimal JFrame and post the code:
    import java.awt.Dimension;
    import java.awt.Graphics;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    public class FooFrame
        private static final int EAST_WALL = 0; // TODO change as appropriate
        private static final int SOUTH_WALL = 0; // TODO change as appropriate
        private static final int SOUTH_EAST_WALL = 0; // TODO change as appropriate
        private static int SCREEN_WIDTH = 640;
        private static int SCREEN_HEIGHT = 640;
        private int[][] a =
            // TODO put in reasonable numbers here.
        private int width;
        private int height;
        private int boxSizeX;
        private int boxSizeY;
        private int startX;
        private int startY;
        //private char[] answer;
        //private boolean userAnswer;
        public FooFrame()
            width = a[0].length;
            height = a.length;
            //this.answer = answer;
            //this.setPreferredSize(new Dimension(SCREEN_WIDTH, SCREEN_HEIGHT));
            boxSizeX = (SCREEN_WIDTH) / (width + 2);
            boxSizeY = (SCREEN_HEIGHT) / (height + 2);
            startX = boxSizeX / 2;
            startY = boxSizeY / 2;
            //userAnswer = userAnswer;
        public JPanel createMyPanel()
            JPanel panel = new JPanel()
                @Override
                protected void paintComponent(Graphics g)
                    super.paintComponent(g);
                    myPaint(g);
            panel.setPreferredSize(new Dimension(SCREEN_WIDTH, SCREEN_HEIGHT));
            return panel;
        private void myPaint(Graphics g)
            a[height - 1][a[height - 1].length - 1] = SOUTH_WALL;
            g.drawLine(boxSizeX, boxSizeY,
                (SCREEN_WIDTH - (boxSizeX)), boxSizeY);
            g.drawLine(boxSizeX, boxSizeY + boxSizeY, boxSizeX,
                (SCREEN_HEIGHT - (boxSizeY)));
            int currY = boxSizeY;
            int currX = boxSizeX;
            for (int i = 0; i < height; i++)
                currY = (boxSizeY) * (i + 1);
                for (int j = 0; j < width; j++)
                    currX = (boxSizeX) * (j + 1);
                    if (a[i][j] == EAST_WALL)
                        g.drawLine(currX + boxSizeX, currY, currX
                            + boxSizeX, currY + boxSizeY);
                    else if (a[i][j] == SOUTH_EAST_WALL)
                        g.drawLine(currX + boxSizeX, currY, currX
                            + boxSizeX, currY + boxSizeY);
                        g.drawLine(currX, currY + boxSizeY, currX
                            + boxSizeX, currY + boxSizeY);
                    else if (a[i][j] == SOUTH_WALL)
                        g.drawLine(currX, currY + boxSizeY, currX
                            + boxSizeX, currY + boxSizeY);
        public static void main(String[] args)
            JFrame frame = new JFrame("Foo Frame");
            frame.getContentPane().add(new FooFrame().createMyPanel());
            frame.pack();
            frame.setVisible(true);
    }

  • Problem with One column Unordered list.

    Help me out !!!
    I have a "one column unordered list" as my report template. The query will return atleast 5 rows at any given point of time. The page shows only 3 records. I tried modifying "Number of Rows" attributes etc., nothing works.
    Let me know what I'm doing wrong or how to fix it.
    Thanks
    - Richard

    Thanks for replying, Scott
    Here is the app http://htmldb.oracle.com/pls/otn/f?p=19793:1
    I want to display only 4 rows (table has around 10 rows). I couldn't display more than 2. If I change the template, then everything works fine. Its just with the "One Column Unordered List" template that is not working.
    Thanks.
    - Richard.

  • What formula to add up the values in one column only if a box is checked in the next column?

    Hi guys,
    I am creating a spreadsheet for my wedding guestlist.
    In one column I have a number to tell me the total number of adult guests the party (e.g fried and girlfriend = 2) and then the next two colums are check boxes, one for daytime and the next for nighttime.
    What I would like to do is in a footer row under the daytime time checkbox column is to total the first colum (the total number of wedding guests in each party).
    I hope that I am explaining this ok, sorry if it is vague.
    I understand to use COUNTIF to total the number of checked boxes in the column and have been working on COUNTIF + the sum of the previous column but it's not really working.
    Any help will be greatly appreciated.
    Thanks,
    Phil

    Phil,
    Here's an example of what you might do:
    The expression in the footer of column B is:
    =SUMIF(B, TRUE, $A)
    and, the expression in the footer of column C is:
    =SUMIF(C, TRUE, $A)
    Regards,
    Jerry

  • Resulting grid does not contain at least one row, one column and one POV

    I have upgraded to 9.3.3 recently.
    We have a front end app which will run MDX queries to retrieve data.
    Sometimes based on the users selections MDX query might get back nothing i.e will get #missing across all rows/columns and this works fine with the existing 9.3.1 essbase server.
    If I run the same query against a 9.3.3 essbase cube I get the error "Resulting grid does not contain at least one row, one column and one POV. If you have any suppress row options selected pls clear them."
    I DO NOT have Supress missing data/zero enabled. Not sure why I get this error even though I dont have that option enabled.
    Essbase 9.3.3 on HP-UX ITanium 11.31
    APS 9.3.3 on win 2003 R2
    Smartview 9.3.3 - also tried with smartview 9.3.1.6 and see the same error.
    Any suggestions to fix this issues?

    The front end is using a VBA command "hypexecutequery" and with 9.3.3 essbase I get a return code -9 which means Operation was cancelled as per the smartview doc.
    In 9.3.1 essbase I get the return code 0 which means the query is fine even if it does not return any data.
    The query I am using now will return nothing as it is a check to see if there is any data. But with 9.3.3 Essbase I get an error code -9 which looks like it does not like the syntax or something.
    Any suggestions?

  • From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    Hi,
    Use NVL or COALESCE:
    NVL (col_a, col_b)
    Returns col_a if col_a is not NULL; otherwise, it returns col_b.
    Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
    For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • I have two numbers listed in my messages tab under settings.  One number is checked(mine) and the other is not(my sons).  However when someone sends me a text it goes to both mine and my sons iphones.  How do i delete his number from my phone.

    I have two numbers listed in my messages tab under settings.  One number is checked(mine) and other is not(my sons).  However when someone sends me a test it goes to both numbers.  Mine and my sons.  How do I delete his number so that he no longer received texts intended for me.

    The best way is to not share Apple IDs but also make sure under Settings & Messages on both devices that only one phone number is checked.

  • When creating a "lookup" column be able to display not only one column from the other list, but additional columns

    With the lookup technique, it is possible to select an item from another list and display one column of this item
    It is obviously possible to create several lookup columns on the same list and therefore display several columns
    There’s a high risk of not selecting the same item and therefore have inconsistent columns
    The Requirement therefore consist of being able of displaying several columns of the same item from the other list, based on one unique selection
    Example:
    In list(x), define lookup column on list (y), column Title (possible today)
    Then define a “secondary” lookup column on same list, column Code
    The effect would be that when selecting an item from list (X), both Title and Code would show up consistently in 2 different columns of list (Y)
    All possible solutions are welcomed

    If you are using SharePoint 2010, you can retrieve additional columns when adding a Lookup. If you are using 2007, there is no direct OOTB way, but the following two posts provide potential work-arounds:
    https://www.definitivelogic.com/blog/microsoft-sharepoint-2007-pulling-column-data-one-list-another-based-common-list-field
    http://stefan-stanev-sharepoint-blog.blogspot.com/2010/11/sharepoint-2007-associated-lookup.html
    Dimitri Ayrapetov (MCSE: SharePoint)

  • Pages:  How can I sort one column of words and not have it affect the other columns?

    How can I sort one column of words and not have it affect the other columns?  I have opened the inspector to the edit columns and rows under Table.  It will sort the column, but then it changes the other colums as well.  I know that if I use Numbers, it will work, but I want to know how to do the same thing in Pages.

    Hi Peter,
    Numbers sorts full rows on values in selected column(s). The technique for sorting a single column is essentially the same as Jerry is describing for Pages tables—separate the (data in the) column to be sorted, sort it, return it to the table.
    In Numbers the actual column may be separated from the original table, sorted, then returned. In Pages, the data must be extracted, sorted, then pasted back in, overwriting the unsorted data (if it was left in the original table).
    iWork tables follow a database model in which each row is a Record, and each column holds a Field within the records.
    As evidenced by the current question (and several similar questions arising in the Numbers community) that model doesn't apply to the way some users, especially some who come in from the MS Excel world, use tables.
    With Excels model—islands of data on a single large table, the ability to sort one or a selected few columns of data makes sense. One 'island' may comprise only cells AA21:AH50. Sorting that small 'table' should be possible without disturbing the rest of rows 21-30, which are probably part of one or more other 'data islands' in the sea that is a MS Excel spreadsheet.
    In Numbers, each of those 'islands' would be a separate Table, and that Table would be sortable without disturbing other Tables in the document.
    Regards,
    Barry

  • EA2: Code is generated for only one column with Domain check constraint.

    I created a Domain with a Value List (Y or N - Yes or No) and used that domain for two columns in the same table. But for only one column (the last one) the check appears in the generated DDL.
    After I enabled the "Use Domain Constraints" both checks appear in the DDL, but one as an inline check constraint and one as an "Alter table add contraint.."
    Once I changed the naming Template for the check constraint, both constraints are generated as an Alter table clause. The inline check constraint is only generated when the name of the constraint (according to the template) is too long. It would be nice if I could choose if I want an inline or a separate check constraint definition.
    Edited by: Roel on Nov 23, 2010 11:55 AM
    Edited by: Roel on Nov 23, 2010 12:02 PM

    I logged ER for that
    Philip

  • Safari, iTunes, software update iCal not connecting. Firefox is fine. Tried Proxies, but not sure what to do there. Only one box was checked, I unchecked it, and made no difference. Have also tried some other DNS numbers, nothing worked yet.

    Hi There,
    Safari, iTunes, software update iCal not connecting. Firefox is fine.
    I have found some archieved discussions about this, but none that went  into detail about how to fix problem using proxies - I don't really  understand what they are/ do.
    I went into the Proxies screen, Only one  box was checked, "Use Passive FTP Mode (PASV)" I unchecked it, and made no  difference. There was also some stuff written in the "Bypass proxy settings for these hosts and domains" I deleated that and nothing different happened. Have also tried some other DNS numbers,  nothing worked yet.
    Any suggestions?

    I still have no idea what was wrong with Safari last week, but I opened it today, and its all working! Hurrah!
    Woohoo! I'm a great fan of things fixing themselves. Fingers crossed in New Zealand for no further problems.

  • 1600 all-in-one series printer error message to remove and check color cartridge will not go away

    Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled).  Any help would be appreciated.

    I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
    After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
    I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

Maybe you are looking for