One GR against multiple PO's

Hi,
I want to know how to make one GR agianst multiple PO's
regards,
Vimlesh

Hi ,
Go to the tcode MIGO, select PO No. as the reference ans enter ur Po No.
and press on enter.
then enter the next Po No. and press enter.
By this way u can do the GRN for multiple PO.
Note: All the PO's must belong to the same vendor.
Hope it wud have answered ur question
Reward if useful
Aasif

Similar Messages

  • How to use one query against multiple table and recieve one report?

    I have duplicate tables, (except for their names of course) with commodities prices. They have the same column headings, but the data is different of course. I have a query that gives me a certain piece of information I am looking for but now I need to run this query against every table. I will do this every day as well, to see if the buying criteria is met. There are alot of tables though (256). Is there a way to say run query in all tables and return the results in one place? Thanks for your help.

    hey
    a. the all 256 tables whuld be one big partitoned table
    b. you can use all_tables in order to write a select that will write the report for you:
    SQL> set head off
    SQL> select 'select * from (' from dual
      2  union all
      3  select 'select count(*) from ' || table_name || ' union all ' from a
      4  where table_name like 'DB%' AND ROWNUM <= 3
      5  union all
      6  select ')' from dual;
    select * from (
    select count(*) from DBMS_LOCK_ALLOCATED union all
    select count(*) from DBMS_ALERT_INFO union all
    select count(*) from DBMS_UPG_LOG$ union all
    remove the last 'union all', and tun the generated quary -
    SQL> set head on
    SQL> select * from (
      2  select count(*) from DBMS_LOCK_ALLOCATED union all
      3  select count(*) from DBMS_ALERT_INFO union all
      4  select count(*) from DBMS_UPG_LOG$
      5  );
      COUNT(*)
             0
             0
             0
    Amiel

  • One cheque against multiple DDs

    Dear Experts
    How do we achieve the following :
    Issuing one cheque to banker and get multiple DDs in favor of vendors. Can we update the same DD numbers in payment documents (Individual manual payments to vendors) like manual cheque creatin.
    Thanks in Advance
    Ratnakar

    Hi
    Yes. you can do it 
    First transfer the amount to bank and from there bank will transfer the amount to respective vendors through ther banks.
    Go for implementing automatic payment programme according to your client reqyuirement. Check  TCode F110 which is master transaction for APP.  Check at TCode F110-Environment-maintain Config.....
    Cheers
    Srinivas

  • One invoice against multiple DAs

    Hello Friends.
    I got a request from one of my client to create single invoice for a particular customer on every month end -30th or 31st for all the goods purchased during that month.I created a invoice list through monthly invoice calender ,so that there will be consolidated invoice list during month end.But the client declined it and said there should be single invoice for all purchases during that month.
    Please suggest your views as to how to go about through our standard SAP settings.
    Regards
    Ranga
    Edited by: Lakshmipathi on Nov 15, 2011 8:36 PM
    As already suggested, please make use of the subject effectively

    Dear Raganathan,
    Is there possiblity?
    To get more response to the thread, always use a subject line which is specific
    The solution for your issue is to set a background job of vf04 (billing due list)  in the month end.
    You may search the forum regarding billing due list and how to set background jobs in SAP.
    Thanks & Regards,
    Hegal K Charles

  • Material Issue against multiple reservation in one step

    Hello everybody,
    I want to issue materials against multiple reservation (originating from Service order or PM order) in one step because the number of reservations is quite large (say thousands of reservation in a day). If i go one by one through MB1A it will take a lots of time. Please suggest some solution for the same.
    Regards
    Amit Gupta

    Hi,
    You could write a program (new dialog transaction), in which you can select the reservations for which you want to issue, show the summarized list of materials and quantities to be issued, then you decide which materials you actually want to process, and then call BAPI_GOODSMVT_CREATE to post the individual reservations in the background.
    This is just a general idea, but you can use it to develop the real thing, which will probably turn out to be quite more complex.
    Regards,
    Mario

  • One TPV for multiple Countries

    Hi Experts,
    Could you pls share experirnce/knowledge around having one TPV for multiple countries together. The scenario is like below:
    1. There are mutiple Countries in Central America which are small islands for whom we need to roll out the Travel and Expense Solution.
    2. The Company code is only one which contains employees from all these Countries.
    Could you tell us how can we do the setup. Should we create one TPV at the company code level. OR should we rather use some other criteria for selecting the TPV maybe at the Personnel area or Personnel Sub Area level.
    Your help is much appreciated.
    Regards,
    Vijay

    Hi Kiron,
    These things I am aware about too. My real question is if I create only one TPV for the company code and assign the Country of the Company code then what issues would this cause. To name a few pls see below.
    1) The domestic Country would always be the Company code Country so would be treated as Domestic Country and show on the Form also as domestic Country even for the employees who are from other Countries.
    2) There are setting which SAP allows differently for Domestic and International like per diem, miles cumulations. So these necessarily have to be kept as same even though local laws are different in all these countries as Domestic is only the Company code Country.
    So I need detailed analysis of what impact I will have by having only one TPV as against making many TPV like one for each Country by using some other parameter like Personnel area/Personnel sub area etc.
    Appreciate your help!
    Regards,
    Vijay

  • One lockbox for multiple company codes

    Is it possible to have one lockbox for multiple company codes?

    No, I don't think so. Lockbox is 1:1 for a Company Code.
    You configure Lockbox for a Company Code.
    You can use one of the 2 available Lockbox user exits (not sure which) to write a piece of code that searches invoices against the customer posted to different company codes. You will have to have the intercompany setups.
    You may find an OSS notes for intercompany clearing.
    Hope this helps!

  • OEM12c Job - Run a SQL Script from a central location against multiple targets

    Hi All:
    I need to execute a SQL script that can be run as OEM Job against multiple targets from a single location so that the output csv files are all in that central location. My problem is that the sql script job documentation says "Make sure that the script file is installed in the appropriate location on all targets". Is anyone aware of a way I can do this so that the SQl script is executed from a location on my OMS console?
    Cheers

    Hi
    Create SQL job to run against on the server. Save those results (csv) file in local target. And crete one OS job, to collect all csv files into your OMS Console.
    Regards
    Krishnan

  • Delivery against multiple PO

    Dear all,
      I want to create delivry against PO and i am using GN_DELIVERY_CREATE . Plz tell me can i use it to create delivery against multiple PO . Plz suggest some small example.

    Hi,
    I am little bit disappointed since I did not get even a single reply for the issue that I raised. Anyways finally after couple of days debugging VL10d and going thru SAP support website I found couple of solutions. Here it is in case anybody else needs it in the future.
    I am using solution 2 below.
    Solution 1.
    From SAP portal website u2013 Apply SAP note 386340 (Grouping purchase orders into one delivery using VL10*)
    Note- This solution will affect all your plants and delivery types that is using VL10d transaction or any other transactions calling FM GN_DELIVERY_CREATE
    Solution 2.
    This is the solution that I am using and it is done by implementing BADI  u2018LE_SHP_GN_DLV_CREATEu2019 method MOVE_KOMDLGN_TO_LIKP.
    1) Here I am checking for two fields (IS_XKOMDLGN-WERKS and IS_XKOMDLGN-LFART) are equal to the plant and delivery type that I need to combine deliveries for.
    2) If step 1 above is true then I am updating the header structure CS_LIKP-LFDAT (delivery date) to todays date (sy-datlo).
    Thanks
    SHR.

  • How to create a single business service against multiple Queues in OSB

    Can I create one business servcie against multiple jms queues.
    and based on content routing i want to pass the queues' JNDIname
    for example
    jms://localhost:7001/jms.cf/$variable_queueName
    and in runtime i want to provide the queue name for variable "variable_queueName" in the above endpoint URI.
    is it possible?.
    Thanks,
    Narasimha.
    Edited by: user13154768 on Jun 2, 2010 5:03 AM

    You can use routing options action to achieve this.
    see Dynamic Service Invocation sample under OSB code samples :
    http://www.oracle.com/technology/sample_code/products/osb/index.html
    Dynamic Service Invocation Sample:
    http://www.oracle.com/technology/sample_code/products/osb/samples/DYNAMIC-DISPATCH.zip

  • One column having multiple values with comma separator.

    Hey Guys,
    In my db, one culmn having multiple values with comma separator. like column_name = 'value1,value2,value3'. Now I want to compare this column to another column and fetch in Cursor.
    and each value having corresponding email_id, By fetching cursor, I need to populate email_ids.
    Thanks in advance!!
    -Lakshman

    Please compare and fetch cursor and populate result with out extract data into temp table. Give me the query!You have not provided DDL for table so I don't know table or column name to write any SQL.
    You have not provided DML for test data to run SQL against.

  • SM21 log Lock triggered against multiple execution

    Hi All,
    Please refer to the log in SM21 XI.  I have checked SM12 , no locks displayed. Please advise on how to analyze this log further.
    04:10:26 sapxi_XP1_*  DIA PIAFUSER Lock triggered against multiple execution: ID: C*************************
    Regards
    Shiva

    Dear Shiva, dear Daniel,
    the technical background for introducing  this system log entry was to deal with parallel execution of one message. For details please refer to SAP Note 1147287.
    Best regards,
    Harald Keimer

  • How to get one value from multiple duplication for a key figure field

    Hi expert,
          I have a infoprovider, with following format:
            employee     hourly_rate   action_type  count of action
         there are multiple rows for each employee, I want to create query as follows:
            employee     hourly_rate   action_type  count of action
         in which hourly_rate is constant , only retriving one value from multiple rows for one employee, count of action should be summarized. 
    how to get this hourly_rate.
    Many Thanks,

    Hi,
    put the employee in rows panel -> reaming object put it in free char panel.
    suppress the all result rows for the all object except employee .
    select the object -> go to query properties -> select display tab -> select result rows -> select suppress.
    select the employee -> go to query properties -> select display tab -> select result rows -> select always display. - now it will give employee wise hourly rate summarize data.
    Thanks,
    Phani.

  • Single Excise Invoice Posting against multiple Goods Receipt.

    Hi,
    We made a Purchase Order, say 4500000753, of 100 Qty,
    The Vendor sent us the Material in two different Challans but in same date and two created two Material Documents,say 5000000772 & 5000000773 for Goods Receipt.
    The Vendor sent us single Excise Invoice for both the Challans (goods receipt). Please advise how to post the Excise Invoice.
    We tried to capture Invoice against Purchase Order, but the system is giving the following message:
    Document 4500000753   does not contain any selectable items
    My Queries / doublts
    1. Is it possible to post excise document against multiple goods receipt documents.
    2. In what case we excise posting against Purchase Order and what is configuration required.
    3. Can we post excise invoice with two different Invoice Numbers like 123-A & 123-B
    Please guide.
    Regards,

    Hi Jeyakanthan,
    Thanks for the reply.
    I have gone thru the "Multiple Goods Receipts for a Single Excise Invoice " in Sap Help Documentation, what I have understood is that we can do multiple Goods Receipt against a Single Invoice. Here in this case we do the Goods Receipt against Purchase Order , do the Invoice Capture for first goods receipt againts Purchase Order and we enter the Invoice Number (say 745, sent by the Vendor) while capturing excise invoice. When the second shipment (against the same PO) comes, we do goods receipt and we refer the "Only Refer Excise Invoice" while doing the goods receipt. Finally after when we have entered all the shipments for the PO, we do the Excise Posting.
    Here in our case we have already posted the Goods Receipt (without entering the Invoice Number in first goods receipt) and now we want to capture & post excise invoice for a Single Excise Invoice (Invoice No. say 745,).
    Please correct me if my understanding is wrong.
    Here we have got two options:
    a. Reverse all the goods receipt & re-enter the goods receipt .
    b. post two separate excise invoice against each goods receipt mentioning dummy excise invoice number like 745-A & 745-B.
    Option a seems difficulty as we will have to reverse all the subsequent goods receipt & transfer posting documents.
    Option b seems legally wrong, as per understanding.
    Request you to please advise.
    Regards
    PK

  • How do i take one layer with multiple selections...

    how do i take one layer with multiple selections and make those selections their own layer?

    Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
    Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

Maybe you are looking for