One Little Glitch on Newly Uploaded Site

I just created a new site for our business and uploaded it to Powweb via FTP. Everything seems fine, with two minor but annoying glitches... actually it's one glitch that has manifested itself in two different spots:
On the home/index page (www.mariothemagician.com) it should read:
"Welcome to the topsy-turvy world of..."
Instead, it just says "the topsy-turvy..."
I don't know where the other text went! I have tried deleting/recreating it and re-uploading it, to no avail. There's always the same problem.
A similar problem occurs on another page of the site:
http://mariothemagician.com/Grown-up%20Parties.html
In the upper left hand corner of the page, there should be a text box that says "Grown-up Parties," in a style similar to the other pages on the site. It's not where it should be.
If you scroll down to the bottom of the page, you'll notice a portion of the text box visible down there. It's shifted itself, and I cannot for the life of me get it to stay in the right spot once it's published.
Does anyone have any idea what the heck happened here, and how I can fix it?
Thank you!

A couple of observations:
1 - your background image is 1.4 MB in size. That's enormous by web site standards. I was able to reduce it to 111 KBs with an 3rd party image editor. Exporting it out of iPhoto with the lowest quality setting but full size dimension wise it was 70KB. I strongly suggest you reduce it's size as it takes a very, very long time to load on my connection which is a fast cable. You will see an enormous increase in page loading speed.
2 - There's a image that has the text "Welcome to" that doesn't display.
3 - There's a image that has the text "The world of" that doesn't display.
The two image files may be behind the background file. Select the background file and send it to the back via the Arranged->Send to Back menu option.
You might try adding the background file as the page background via the Inspector/Page/Layout pane and select Original size as the option rather than tile or scale or any of the others. See if that will make all of the other image files visible. You will have to remove the background image from the page and then add it via the Inspector.
OT

Similar Messages

Email and Link Problems on newly uploaded site??

Hey Everyone,
Just finished loading up the first cut of my site at http://web.mac.com/wakestuff and i have a few problems with my email and links page.
In iWeb, the email and links are fine and they're there - in the page online, they're just question marks in a blue square. . . . any ideas why??
Many thanks for any info to clear this up - the site officially launches on monday so i need a little bit of a quick fix and im all out of ideas!

Take a look at your pages names. Example:
http://web.mac.com/wakestuff/iWeb/WakeStuff.co.uk/%20%20Email%20%26%20Links.html
%20 stands for a space.
Your page name has several spaces at the beginning, which is screwing up the links to the images in the corresponding folder. To be honest, I am surprised that page is the only one you are having difficulty with.
Here is a thread where someone had the same problem:
http://discussions.apple.com/thread.jspa?messageID=3893957&#3893957

Just upgraded iWeb app to version 3.0.4 from an iLife 11 disk. I like some of the newer features but it seems to have one glitch: when I upload the pages to my ftp server, the automatic navigation bar at the top of the page disappears. Any ideas?

Just upgraded my old iWeb app to version 3.0.4 from an iLife 11 disk. I like some of the newer features but it seems to have one glitch: when I upload the pages to my ftp server, the automatic navigation bar at the top of the page disappears. Any ideas? Thanks.

Looks like a couple scripts are missing:
If you republish the entire site iWeb should recreate these for you...
I don't use the built-in navigation. I usually just create my own:
http://jeffnitschke.com/Home.html

When I first am looking at my newly uploaded photos in "Library", a box appears near the bottom of the photo that says "loading" (the photo looks good to me), then it is more "faded" and does not look as good. Is there some setting on that I am not aware

When I am first looking at my newly uploaded photos in "Library," a box appears near the bottom of the photo that says "Loading". While it is loading, I usually think the photo looks "good". After the photo is done loading, it looks more washed out. Is there some sort of setting that I might have on (or that I need to turn on) so that this does not happen. I have Lr4. Thanks.

Hi Tracy,
There used to be a way to see if poster was new to the forum.., anyway - welcome to the forum.
As I was alluding to, biggest differences in initial display are due to:
* Camera calibration profile.
* Auto-exposure/contrast settings (for which compensations have been auto-applied in camera, but not in Lightroom).
So, choose a matching camera calibration profile (whether that's an option or not depends on your camera model - they're available for many but not all models) if you prefer one of them over "Adobe Standard" (the factory default profile).
Also, your camera covers for underexposure due to non-optimal auto-exposure/contrast setting, Lightroom doesn't, so your options are:
* turn it off in camera.
* learn to compensate manually (or automatically via a plugin) in Lightroom.
Of course, in addition to preferred defaults (alt-click big "reset" button in dev module), come up with some presets which are appropriate for your druthers and type of photography.. e.g. these will compensate Nikon ADL settings:
http://www.robcole.com/LrForumSupport/ADL%20Compensations%20%282012%29.zip
Cheers,
Rob

How do I get the URL address of a newly uploaded page?

I'm using the files manager to upload my page to the server
at school.
When I'm viewing the page in Dreamweaver and go to Preview In
Browser it keeps giving me my local folders address, instead of the
file I uploaded to the server at school. I need to Preview In
Browser
the file on the server so I can copy the correct URL and
send it to my teacher in an email (I need to send him my link to
view my work).
What am I doing wrong?
I can upload to the server because I see my newly uploaded
files sitting there in the Files manager.
How do you Preview In Browser the file on the server? I need
it's URL address.

Hi guy
Preview occurs on your local computer...
Once it'a uploaded to the server, it's too late for
"Preview".
Visit the school's website, or contact the school's server
administrator
for the URL path to your pages.
"smittyboy63" <[email protected]> wrote in
message
news:er8cdv$hl3$[email protected]..
> I'm using the files manager to upload my page to the
server at school.
> When I'm viewing the page in Dreamweaver and go to
Preview In Browser it
> keeps
> giving me my local folders address, instead of the file
I uploaded to the
> server at school. I need to Preview In Browser
the file on the
> server so
> I can copy the correct URL and send it to my teacher in
an email (I need
> to
> send him my link to view my work).
> What am I doing wrong?
> I can upload to the server because I see my newly
uploaded files sitting
> there
> in the Files manager.
> How do you Preview In Browser the file on the server? I
need it's URL
> address.
>

Select more than one photo for an mms upload

I am trying to send more than one photo (by mms) to [email protected] It will only let me select one at a time to upload. I know how to select more than one (capital button), but it does not work. any body know how to select more than one photo to upload at a time?
thanks!
Solved!
Go to Solution.

Sending more than one file is easy to do but I am not sure how facebook works with this, you would have to try
Click the picture you want to send in the MMS and select the contact, when it loads up and you have selected send as MMS the cursor should be at the top right next to the image file name - simply hit the menu button and select attach picture and browse to the next picture you want to send and once you have done that you should see 2 pictures in the MMS window ready to send - trackball or menu button to send from there
Good luck
LuKiN

TRANSFER POSTING FROM ONE MATERIAL CODE TO NEWLY CREATED MATERIAL CODE

Let me know how to transfer stock of one material into another newly created material.

MB1B
MVT Type 309

I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

Hello,
the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
>>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
Hans-Günter

When I open more than one tab with ikls.ru web site - safari freeze immediately.

I have a Lion OS and all updates. When I open more than one tab with ikls.ru web site - safari are freezing immediately.

In safe mode the same problem in Safari. And I couldn't enable the guest account. You can see an attached pic. It's in Russian, but I think it's clear. I took a pic in a safe mode, but in normal mode it's the same.

How to add get the field name for a newly added site column.

I have the following:-
Enterprise wiki site collection inside SharePoint server 2013.
I added a new site column of type managed metadata.
I opened the enterprisewiki.aspx page layout using the SP designer, to add the newly added site column to it.
But I have noted that to add any site column I need to know the field name , for example the default wiki category column is referenced inside the page layout as follow:-
<Taxonomy:TaxonomyFieldControl FieldName="Wiki_x0020_Page_x0020_Categories" EmptyValueDescriptionForTargetTemplate="<%$Resources:cms,enterwiki_nocategories_assigned%>" DisableInputFieldLabel="true" runat="server"/>
<b>
So my question is how I can know the field name for my newly added site column?
Thanks in advance for any help.
Regards

Hi,
The “FieldName” should be the internal name of the column, you will find it at the address bar at the “Site Columns”->”Edit Column” page:
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Does any one know if you can upload a program to use windows on the ipad, like you can with the mac computers??

does any one know if you can upload a program to use windows on the ipad, like you can with the mac computers??

karleyfrombrisbane wrote:
does any one know if you can upload a program to use windows on the ipad, like you can with the mac computers??
Nope, can't be done.
Stedman

In trying to transfer iWeb pages (not uploaded) to another computer I went into the library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. Help!

In trying to transfer iWeb pages (not uploaded) to another computer I went into the Library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. On opening the domain all I can recover is the many component parts, and when unzipped the code. Help! Mike

Code in a domain file - really? That is not possible because the domain.sites file does not contain any html or css code at all - the domain file is your iWeb data file and you won't see any code until you publish your website.
If you can see html code, then you have the wrong file and it is a published version of your site which iWeb can do nothing with - iWeb has no import facility so cannot open any html files.
Go back and ensure that you have the correct domain.sites files that can be found under your User Library/Application Support/iWeb/domain.sites and if you have Mavericks then you need to go to Go and press the alt key to reveal your hidden User Library, so that you can then get to Application Support and then iWeb and then your domain.sites file.
You will also need to go and download either DomainCracker or iWebSwitch which allows you to open individual domain files under Mavericks, because from Lion onwards, you cannot open individual domain files.
Also, it says that you are still using iWeb 08? If this is so, you'll either need to upgrade to iWeb 09 by going to Amazon and purchasing the iLife 09 or 11 boxed set, both of which contain iWeb 09 or you need to switch to newer software that is actively being supported and developed such as EverWeb (http://www.everwebapp.com).

Little glitch in mac os x

i have a little glitch in mac os x: all the application i execute (wheter i compile them, or simply download on the internet) with a swing interface has a litlle "white block" on the left of buttons and vertical scrollbars. is this a known bug? i have 1.5.0_05 JRE.

I also develop in with a Mac (OS X) using Eclispe and I haven't ever had this problem. Post some code if you think it may help. Do you use a GUI builder? I'm using Java 1.4.2 Mac OS X default.
mike

Little Glitch while repairing permissions.

I have been experiencing a little glitch when repairing permissions, and it has been a while now.
The problem appears with all utilities, from Disk Utility to Applejack and so on.
The type of error is the following:
: for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
: for architecture i386 object: ./Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iT unesHelper malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 13 can't byte swap it)
After this, the repair keeps going and glides till the end.
Maybe it is not very important, but it is definitely annoying to know that something in your system is not 100% right....
thanks

Andrew:
The Blue and White G3 will support the latest release OS X. I suspect you mistook it for a Beige G3, like I did at first, which does not natively support OS X, and will need XPostFacto.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6

Missing one little piece of audio.

Hello all,
maybe someone can help me. I have encoded video and audio in FCP using Compressor into MPEG 2, using the 60 minute high quality encode.
i import these assets into DVD SP and when i burn a dvd off DVD SP, i am missing one little snippet of a sound effect.
when i play it back in the viewer in DVD SP, the sound effect is there, when i play it back in FCP the sound effect is there as well. it is ONLY missing after i do a dvd burn.
I have successfully burned a dvd from the same video and audio source before w/nothing missing.
i went back into FCP to make sure that the sound effect is included for the encode and found everything to be ok.
Has anyone had a similar problem? Can anyone help me?
PowerMac G5 Mac OS X (10.4.2) DVD SP 2.0

One, viewing a PDF is not part of the DVD specification, so you won't be able to do that from Encore at all
Second, sound goes with the menu in a DVD, so changing to a different menu means new sound
To view a PDF on a disc, you need to do computer programming... or, maybe, one of these products
Use Encore and http://www.intellidisc.com/ for a "movie" DVD which has computer content,
or use Macromedia Director http://www.adobe.com/products/director/ by itself
Or use Sony DVD Studio http://www.sonycreativesoftware.com/dvdastudio

One Little Glitch on Newly Uploaded Site

Similar Messages

Maybe you are looking for