One or More Resource is not configured properly ..

All,
I am having issue when i am trying to disable a user , on the UI , its throwing an error saying "One or More Resource is not configured properly .."
Can you please help me to understand the issue
Thanks
Preeti ..

You can try isolating the resource which is causing the issue , make sure that all the resources are having disable trigger mapped in Task effect of the task .
Thanks
Suren

Similar Messages

Resource not configured properly

Hi,
I had created a generic resource say ResourceX. Now when I disable a user who has been granted this resource X, I get following exception:
DOBJ.RESOURCE_NOTCONFIGURED_PROPERLYOne or more provisioned resource is not configured properly
I am using OID connector to provision into LDAP. This is making changes in orclisenabled attribute, but not in status attribute.
But when I try to simply disable a user without granting him this resource, its working fine.
What can teh problem be?
N.B. I havent defined any delete or disable task in the resource.

Re: ADCS Enable User is not getiing Initiated

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

Error 633: The modem (or other connecting device) is already in use or is not configured properly.

Hi all,
I recently got that a new USB CDMA modem which works fine on Windows 7 system but when I try connecting to my other laptop which runs on Windows 8.1, it keeps giving the error:
Error 633: The modem (or other connecting device) is already in use or is not configured properly. I've most of the links and solutions shared but none seems to work. I've generated diagnostic logs which are as follows. I interpreted some and most probably
it seems like an issue of incompatible driver, but does anyone else sees any issues in these diagnostic logs. Looking forward to your suggestions.
[4724] 06-01 20:01:56:314: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:315:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:315: LoadPortsList2
[4724] 06-01 20:01:56:315: GetRasPorts
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:315: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=603
[4724] 06-01 20:01:56:316: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=0
[4724] 06-01 20:01:56:316: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:316: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:316: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:317: LoadPortsList=0
[4724] 06-01 20:01:56:317: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:317: Reading media group "serial"
[4724] 06-01 20:01:56:317: New link format
[4724] 06-01 20:01:56:317:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:317: Port=COM17
[4724] 06-01 20:01:56:317:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:318: Port configured
[4724] 06-01 20:01:56:318: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:318: Reading device group "modem"
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:318: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:318: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:318: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: DwEnumEntryDetails done. 0
[4724] 06-01 20:01:56:318: RasGetEntryPropertiesW
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: GetPbkAndEntryName
[4724] 06-01 20:01:56:318: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:56:318: IsPublicPhonebook=0
[4724] 06-01 20:01:56:318: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: IsVirtualizationNeeded: return value = 0
[4724] 06-01 20:01:56:319: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:319:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:319: LoadPortsList2
[4724] 06-01 20:01:56:319: GetRasPorts
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:319: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=603
[4724] 06-01 20:01:56:320: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=0
[4724] 06-01 20:01:56:320: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:320: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:320: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: LoadPortsList=0
[4724] 06-01 20:01:56:322: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:322: Reading media group "serial"
[4724] 06-01 20:01:56:322: New link format
[4724] 06-01 20:01:56:322:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:322: Port=COM17
[4724] 06-01 20:01:56:322:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:322: Port configured
[4724] 06-01 20:01:56:322: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:322: Reading device group "modem"
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:322: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:322: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:322: DuplicatePhoneNode
[4724] 06-01 20:01:56:322: GetPbkAndEntryName. rc=0x0
[4724] 06-01 20:01:56:322: GetInstalledProtocolsEx=0xc.
[4724] 06-01 20:01:57:690: DwEnumEntryDetails
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: ReadPhonebookFileEx: called for pbk C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: IsVirtualizationNeeded: return value = 1
[4724] 06-01 20:01:57:690: GetLUAPhonebookPath: Return value 0 hiddenpbk path C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\_hiddenPbk\rasphone.pbk
[4724] 06-01 20:01:57:690: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:57:690: SyncMasterPhonebookFile:++
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: FindFirstFile failed with 0x2
[4724] 06-01 20:01:57:690: ReadRasFile: File C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk does not exist
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile ++
[4724] 06-01 20:01:57:690: WritePhonebookFile
[4724] 06-01 20:01:57:690: ModifyEntryList: Number of connections written 0
[4724] 06-01 20:01:57:690: RASSQM: In WritePhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile : WritePhonebookFile failed with 0
[4724] 06-01 20:01:57:690: RASSQM: In ReadPhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: ReadPhonebookFile returns 0
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:691: IsPublicPhonebook=0
[4724] 06-01 20:01:57:691: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: IsVirtualizationNeeded: return value = 0

Hi,
We could get more information about your problem through this log. While, for your problem, first of all, it would be better to contact USB Modem manufacture to confirm its compatibility with Windows edition.
After that, make sure its driver was upgraded to be latest.
Roger Lu
TechNet Community Support

Error: ORA-16796: one or more properties could not be imported from the dat

DGMGRL> CREATE CONFIGURATION prod as
PRIMARY DATABASE IS prod
CONNECT IDENTIFIER IS prod;Configuration "prod" created with primary database "prod"
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
can any one help me out , i am not sure what could be the problem.
i checked the listner and tnsnames every thing looks good, if u want me to post any thing else plz do let me know
thanks
firdous

16796, 0000, "one or more properties could not be imported from the database"
// *Cause: The broker was unable to import property values for the database
//          being added to the broker configuration. This error indicates:
//          - The Oracle Net service name specified in DGMGRL CREATE
//            CONFIGURATION or ADD DATABASE command was not one that provides
//            access to the database being added.
//          - There were no instances running for the database being added.
// *Action: Remove the database from the configuration using the REMOVE
//          CONFIGURATION or REMOVE DATABASE command. Make sure that the
//          database to be added has at least one instance running and that the
//          Oracle Net service name provides access to the running instance.
//          Also check the broker log file for additional information.
//          Then, reissue the CREATE CONFIGURATION or ADD DATABASE command.

Scheduled refresh - Test connections settings validation failed: one or more connections did not pass the test

I copied a workbook that has a working scheduled refresh
modified the data model, added some new reports
added a new source (PQ from azure market place)
uploaded workbook to new powerbi location.
get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
Test connections settings validation failed: one or more connections did not pass the test
Technical Details ▼
Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
Date and Time: 12/12/2014 06:13:06 AM (UTC)
what's the problem?
Jakub @ Adelaide, Australia Blog

Still a problem and not just for me but other users going by the threads on here...
https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
Jakub @ Adelaide, Australia Blog

Error message when Database details are not configured properly

Hi,
I am using JDeveloper 11.1.1.1.4 and ADF-BC in my project.
I use Weblogic Data Source connection to connect to Database.
I have a requirement that when data base details are not configured properly in Weblogic Data Source or when Database is down,I need to display an error message either when I access application task flows or in login page itself when application starts.
Can I achieve this???Please advice.
Regards,
Praveen

Praveen,
Check out Steve's example
https://blogs.oracle.com/smuenchadf/resource/examples#129
-Arun

One or more devices do not support multidevice tasks.

Hi,
I'm working with 2 USB X series DAQs (USB 6356). I am acquiring analog voltage data from all 8 channels on both DAQs (so 16 analog input channels total). I need the data acquisition to be synchronized and to trigger from an external digital source (a signal that I currently have wired into PFI0 of Dev A). I am using a sampling rate of 800 kHz, and a buffer size of 400 kS.
I have tried using one express vi for both devices; two separate express vis for each device; and recently changed to the DAQmx icons (as pictured in the attachment). Either way I get an error (error -201426: One or more devices do not support multidevice tasks.). It then references DevA and DevB as the devices that don't support the tasks. I was under the impression that multidevice tasks are okay with X series devices. I am using NI DAQmx 9.5.5.
In the attached picture, I have left out most of the while loop. The part of the diagram I left out is just for visualizing and saving the data, I have included the parts I felt necessary for describing my problem.
I would really appreciate any advice.
Thank you,
Leslie
Solved!
Go to Solution.
Attachments:
multidevice daq vi.PNG ‏24 KB

Thank you both, for shedding some light on my setup and this error. The information I was finding on the NI website did not seem to specify that USB Xseries devices were an exclusion to the statement made.
I have changed my program and built two separate tasks, which has eliminated the error 201426 message. I have attached a picture of my newest program. It is still not functioning, however no error messages are sent. for(imstuck), I'm not sure what you mean by "build an array of tasks" or read inside a for loop. We view the digitized signal from each channel (DevA ai0:7 and DevB ai0:7) separately anyway, so would concatenating the waveforms be necessary? When I run the program and "highlight execution" the program seems to get stuck on the DAQmx read tasks, no errors, it just doesn't proceed or send the waveform data. Am I missing something or is the for loop/concatenating the waveforms necessary?
Thanks again,
Leslie
Attachments:
separate tasks.PNG ‏41 KB

"Your server is not configured properly or your search query has ..."

Config info:
v490, 20k+users, JES 2005Q1,
118540-23
118207-42
115614-20
Brief Description:
When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
"Your server is not configured properly or your search query has
exceeded the limit. Please check server configuration."
Additional info:
Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
Logs:
/sun1/dirserv/slapd-mail/logs/errors:
[11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
/sun1/dirserv/slapd-mail/logs/access:
[11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
attrs="objectClass"
[11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
/var/sun1/comexp/logs/uwc.log:
Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
lookthru_limit=30000
I have a ticket, just wondering if anyone else has this problem...

You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2.

SOLVED: Dell XPS 1530 wireless not configured properly , need help.

Had another post about different questions but after playing around with this for a few days I think that my wifi is not configured properly. Every thing looks good on the hardware and driver end and shows up properly.
This is my wifi card
grep -i wireless
0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:C5:84:7A:7C
inet addr:162.178.12.101 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:c5ff:fe84:7a7c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6225 errors:0 dropped:0 overruns:0 frame:0
TX packets:6557 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4309676 (4.1 Mb) TX bytes:996746 (973.3 Kb)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:380 (380.0 b) TX bytes:380 (380.0 b)
wlan0 Link encap:Ethernet HWaddr 00:1C:BF:75:0A:1F
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-1C-BF-75-0A-1F-00-00-00-00-00-00-00-00-00-00
[NO FLAGS] MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
My rc.conf is asfollows.
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="America/Toronto"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="archtom"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 162.178.12.101 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(eth0 wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 162.178.12.1"
#ROUTES=(!gateway)
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond alsa hal fam gdm)
Another think is the card is there and recognized but the led light is not on so the card is not actually turning on and that can be an issue so can not scan for networks or even bring wlan0 up as I get this error.
SIOCSIFFLAGS: No such file or directory
Your help would be greatly appreciated as though I have used Ubuntu and Fedora for years everything worked out of the box so this is new to me. He he breakage I love Arch , learning so much.
Last edited by TomWitko (2009-08-23 15:05:33)

Umm k looking into this and fixing this now. Went by the wiki page for the dell xps 1530 and it stated I needed the 65 driver, just figured out I have the 45 card so need the 45 driver. Will update later when I get it fixed.
K changed the driver and now can get wlan0 up ,, have to check out if everthing works now.
Last edited by TomWitko (2009-08-23 14:58:09)

One of my ipods is not syncing properly. System says sync is complete but the updates aren't being made. Can I correct this?

One of my iPods is not syncing properly. The system says "sync complete". but it's obvious the updates are not being made. Can I correct this?

You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

Error Uploading Files - One or more files could not be uploaded

Hi, I used Adobe SendNow without any problems for years. Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files. Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again. If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files. I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

Hi,
Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
(The other way to upload files is to simply drag and drop them.) If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
You should now see the folder you just created. Open it up, and select the files you want to send.
If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

Satellite A200: Modem has an error 633: already in use or is not configured properly

My notebook is A200-FE0.
When I tried to make a dial-up connection, there is an error window says:
"Error 633: The modem (or other connecting device) is already in use or is
not configured properly".
When I test my modem by clicking query modem on the Diagnostics tab in the modems tool in
Control Panel, the modem responds normally and appear to be working
correctly.
When I test my modem by using the Toshiba diagnostic tools, it shows "pass" and I canhear the dail tone too.
I tired to uinstall and reinstall the driver twice.
But I just can't make a dial-up connection and keep getting the error 633. I am really upset about it.
Please help me! Thank you a lot!

Thanks for the hint.
I tried this method too. I am using windows vista home premium. I can't find the files named telephon.ini and tapiini.exe in my computer.
I noticed that this method is only for windows 98 and windows ME.

Error "One or more values could not be set" - Oracle Connector

Hey guys - I should have known there was a forum here with smart people. I'm hoping someone can shed a little light on our latest issue. When we try to invite people not within our company to a meeting, (even if they are included in our contact list/address book, etc) the error "one or more values could not be set" I'm pretty sure it's a forms error, but can't seem to resolve it. It started with the 2003 outlook service patch. I've applied every connector patch available and have searched for an answer, but can't resolve this icky problem (very crabby users) I've searched this forum but didn't see this topic. If it's already been addressed, forgive me and point me to the thread. If it hasn't and anyone has an idea, I'd appreciate some help!
Thanks
Kim

I have CRXI
First off, try verifing the database
Database,
Verifiy Database
Then if it is still broken.
Double-check all of the unlikely places in your report structure. Look at the subreport links. Look through all your formulas (including the ones for formatting). Keep in mind that Crystal doesn't have IntelliText, so you need to double-check (or even triple-check) that everything is spelled correctly.
Odds are strong that, somewhere in there, you are accidentally referencing a field that doesn't exist.

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

One or More Resource is not configured properly ..

Similar Messages

Maybe you are looking for