One sender two recievers
hi friends,
i have a object .i want to send 100 recordes.i heve one sender ,two recievers. i send 100 recordes two two recievers.first 50 are to first sender and remain are to second records.i dont know how to design and how to configure pls help on this with simple example.
advance thanks
Hi,
try this if it is possible,
Give numbering to records from 1 to 100.Add one key filed like 'recordno' in your source stucture and get the record number into 'recordno' field in source structure.
you can identify the record number using context object.
in context object u can specify the condition like recordno<50 or recordno>50.
if recordno<50 --> rec1
if recordno>50 --> rec2
u can assign above two conditions in reciever determination.
for context object refer below links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
for 1:n mapping refer below link,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Similar Messages
-
One sender - two receivers - same Message-ID?
Hi,
I don´t know if it is possible to send a message (which is, as you know identified by its Message-ID) to two receivers where at least one receiver has to keep the Message-ID of the xi-incoming message. This is necessary because it has to be used as part of the receiver-filename.
We work with triggerfiles, which identify in which sequence the Messages have to be processed at the receiver system. If you use more than one interface determination, for each receiver an new Message-ID is generated. This is what I want to prevent.
Does anyone know if this is possible using a business process. (XI3.0 SP17)
If yes, what is it to look like? I´m thinking about one receiver and two senders (in bp-design) :).
Regards,
ThomasHi VJ,
I think your doubts are reasonable, as this doesn´t fit the "Exactly once"-idea of messages. As soon as the bpe picks up the Message, you got no chance to save the original Message-ID. I just designed a little process to give it a try, but it didn´t work (i. e. the two new Message-IDs appeared for the BP-outgoing messages).
Why I want to use it? This would be an addon for a more or less complex Szenario, which we cannot change without a redesign of the hole szenario ...
I think we´ll have to let the application server generate the Message twice with different receiver agreements. Sounds ugly.
Thank you for confirmation.
Best regards
Thomas
Best regards
Thomas -
Hi All,
I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
Thanks
MichaelUse xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service -
How can One sender communication channel pick two file from two location
Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter. -
One Sender system (sync) and two receivers system(Sync) . Pls help
Hello All,
For one Sender system (sync) and two receivers system(Sync)
as I am using BPM for it.
CRM sender system (RFC)
DM (RFC) and ERP Receiver systems (RFC)
Pls let me know
In Receive there is only two mode
1. Async
2. Open S/A bridge
So do i need to choose Async mode for sender RFC.
Pls tell me the BPM flow steps for my scenario
RegardsUse Open S/A bridge
The scenario could be done wihtout bpm. Ur requirement is not clear but here could be the steps. Steps.
Receive
Sync send
Sync send
Async send
Regards,
Prateek -
One Sender system and two receivers system scenario. Pls help
Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
Pls tell me and send me links/docs for this scenario.
RegardsHi Rick,
For two receivers you require 2 interface determination, receivers determinations etc.
Go through these threads for one sender and multiple receivers:
one sender and two receiver
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
Rewrads if found helpful.
BR,
Alok -
I have One Sender system and two receivers system scenario. Pls help
Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
How to proceed with this.
If my second receiver is async then how to proceed with this.
RegardsHi Rick !
Depending on your requierements, you can create a BPM that
1) receives request from sender
2) sends request to receiver 1 / receives response from receiver 1
3) sends request to receiver 2 / receives response from receiver 2
4) do some processing with both responses
5) sends response to sender.
If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
Regards,
Matias.
ps: please award points if helpful -
Unable to send two person sms at one time in ios 8.1.3
if i send one person at one time so it easily sent but when i send two persons in a new message box so it say message sending failed
either i if i send them same message separately so is sent.???
Can you check what is the issue .?
i am having this issue when i have updated it to 8.1.3..Hi shezi007,
Thank you for contributing to the Apple Support Communities.
It sounds like you're not able to send a group text message on your iPhone.
You can find many good troubleshooting tips that can help the situation at this link:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
I recommend starting with these tips:
Go to Settings > Messages and make sure that iMessage, Send as SMS, or MMS Messaging is turned on (whichever method you're trying to use).
If you can't send messages to a certain recipient, delete any conversations you have with them and try sending a new message. When you delete a conversation, you won’t be able to recover it. Make sure that you take a screenshot or forward any messages that you want to keep.
If you can't send or receive SMS or MMS messages, contact your carrier to check your text messaging plan.
Sincerely,
Jeremy -
Can we send two attachments in one Agent ?
Dear All,
Please help me, Can we create an agent which sends two attachments in single email where one attachment is PDF and other one is HTML link.
Please help me if there is a work around .
Thanks & Regards
Srinivashi
my requirement behind this is dropping elements one below the other in one cell
i got for adding one after the other but not able to do one below the other
stuck in this not able to move further
karthik.k -
hi,
this is file to file scenario...sender side i have my file like...empno empfirst name emp last nem persno....here im sending one mesg...and it has split into n recivers depending on persno...any one can help me in this issue ...without using bpm....
Thanks in advance and for ans u'll be rewarded....
Edited by: hari prasad on Apr 2, 2008 8:51 AMhi
you are creating the file to file scenarios
create the IR
and then create the ID
you are creating the one sender and n number of receiver for that you just give the condtion in interface determination
that is some condition satisfy then data goes to the perticular receiver
and just check it
I hope your prob will solved
thanks
Regards
vijay -
Can we have one sender and mutliple receivers in XI processing
Hello,
I will explain a scenario where you will have one sender channel and mutliple receiver channels.
There is a sender channel along with Sender Agreement where u mention the interface name and namespace.
There are two receiver channels along with two Receiver Agreements one for each with different interface names and namespaces also.
Now the processing is like this,
Sender sends some data and depending upon the agreements the corresponding receiver receives the data.
Will the process is correct or is there any other way to run the scenario?
Thanks,
PrakashHi Prakash chitti,
Of course the scenario that you were telling is possible.. Take the case of file-to-multiple file scenario, where single file sends the source xml and multiple receivers gets the file.. For that you need to have
1: one sender channel
2: two receiver channel
3: one sender agreement
4: two receiver agreement
5: One interface determiniation
6: One receiver determination
at the receiver determination, goto the tab 'Configured Receivers', and specify the number of recievers; and ensure they are present at the 'Configuraton overview for Receiver Determination'..
You can even set conditions for receiver determination from the source point..
This will help you.
Thanks
Vinod V
Help me with points -
IDOC -XI-SOAP one sender different receivers based on condition
Hi All,
I have an IDOC to SOAP scenario.
For each record based on the input flag XI has to send the any one of the request ...like either create or update or delete request. All these message types are a part of single WSDL.
How can i do it?
Thanks in Advance
Jyothsnahi There are two ways you can do this:
1. Without BPM - Since you have to create all the target messages adn you want either the 1st and second, or the first and third: create two multi-mapping with one and two, and one and three. In the receiver determination check the condtion based on which you decide the second or the third message has to be created and route it to the correct mapping accordingly.
2. with BPM, create all the target mapping. In the BPM check the condtion in the switch and do a send accordingly.
You can do this either on Receievr Determination or on Interface Determination.
Add multiple Receievrs/ Interfaces and then add the conditons on which the target should be choosen
to use Xpath for your receiver det. ref these blogs;
a combination of logics should help you in this case ...
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
pls reward points if solution found helpfull
regards
chandra.k -
2 file to file scenarios and one sender channel
hello there,
i am implementing 2 file to file scenarios. referring to the below link i have 'by-pass' integration repository in order to perform my file to file transfer since both the input and output files have the same structure, hence no mapping is required.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417500%29ID0036662950DB01052533299951691312End?blog=/pub/wlg/4383 --> How to send any data (even binary) through XI, without using the Integration Repository
as seen in the link provided above, it is mentioned to provide a 'dummy' interface and namespace as no such things were created in the IR.
Now i have a second development which perform the same task(file 2 file) however the naming and source/target directory for the second one differs fromt eh first.
that is for the first one the source directory is srcroot/folder1/ and for the secon one is srcroot/folder2
the target for the first scenario is trtroot/folder1 and second is trtroot/folder2.
i wanted to use the same sender channel, making use of the advanced features to pick the files from the different directories, however the scenario always put my files, even those from srcroot/folder2, in the first target folder that is in trtroot/folder1 instead of trtroot/folder2.
one easy way of doing this, is to create channels for each scenario, but if possible i want to use one sender channels for both, is that possible for my scenarios?
can anyone please advise me?
if there is a better way, you are welcome to share it with me.
thank in advance.Hi,
You can pick the data using same sender channel.
But there are two ways of putting the files to their corresponding destinatios:
1)Using 'Adapter Specific Message Attribute' in communication channel.
But for this to work you have write UDF in your mapping, but as you are not using IR part, this approach can't be used.
2) Another way is, you can use variable substitution method, where the values of the target directory is populated by payload of the incoming file.
If this is not possible, then there is no way but to define 2 diffrent communication channels for receiver.
-Supriya. -
How Write a Program to send TWO attachments in the same mail.
Hello,
How to write a ABAP program so that when u run this program it shd send two 0r more files as an attachment.
Presently i know how to send a single attachment but not the multiple attachment.
i.e. by using "send_api" function module .
please reply ASAP i need this urgently.this is simpple FM which can can send any type of Attachment.
FUNCTION zsend_mail_attachment.
*"*"Local interface:
*" IMPORTING
*" REFERENCE(V_FILE_PATH) TYPE STRING OPTIONAL
*" REFERENCE(V_SUBJECT) TYPE SO_OBJ_DES
*" TABLES
*" IT_RECEIVERS STRUCTURE SOMLRECI1
*" IT_MESSAGE STRUCTURE SOLISTI1
DATA: gd_cnt TYPE i,
gd_sent_all(1) TYPE c,
gd_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc.
DATA objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
* Binary store for File
DATA : BEGIN OF it_file OCCURS 0,
row(255),
END OF it_file.
* splitting of the filepath
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
DATA tab_lines LIKE sy-tabix.
REFRESH : it_file, objbin, it_packing_list, i_split.
CLEAR : it_file, objbin, it_packing_list, i_split.
DESCRIBE TABLE it_message LINES tab_lines.
READ TABLE it_message INDEX tab_lines.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
CLEAR it_packing_list.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
IF v_file_path IS NOT INITIAL.
DATA : v_len TYPE i,
v_index LIKE sy-index,
v_doc_type TYPE so_obj_tp,
v_filename TYPE so_obj_des .
v_len = STRLEN( v_file_path ) - 3.
v_doc_type = v_file_path+v_len(3) .
TRANSLATE v_doc_type TO UPPER CASE .
SPLIT v_file_path AT '' INTO TABLE i_split .
DESCRIBE TABLE i_split LINES v_index .
READ TABLE i_split INDEX v_index .
v_filename = i_split-row .
v_len = STRLEN( v_filename ) - 4.
v_filename = v_filename(v_len) .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file_path
filetype = 'BIN'
TABLES
data_tab = it_file.
LOOP AT it_file.
MOVE it_file-row TO objbin-line.
APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = v_doc_type.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
it_packing_list-obj_descr = v_filename.
APPEND it_packing_list.
ENDIF.
* it_receivers-receiver = '[email protected]'.
* it_receivers-rec_type = 'U'.
* it_receivers-com_type = 'INT'.
* APPEND it_receivers .
* Call the FM to post the message to SAPMAIL
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = gd_doc_data
put_in_outbox = 'X'
commit_work = 'X'
* IMPORTING
* sent_to_all = gd_sent_all
TABLES
packing_list = it_packing_list
contents_txt = it_message
contents_bin = objbin
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
ENDFUNCTION.
i have made it for only one attchmenet, for multiple attachmenet u can make more parameters <b>v_file_path_1, v_file_path_2, v_file_path_3</b> like wise do the coding as i have done for <b>v_file_path</b>
hope this will solves ur query.....
abhishek -
Using more than one Send connector
Hello
Is it possible to use more than one send connector? Of course it is ;-), but also whit this requirement? I have an additional domain hosted on my exchange. This domain has to use a smarthost with authentication. Now, only this two users should could use this connector. It would be cool, if there is a permission config to allow a group and deny the others or something like this... What could be a solution?
Thanks
NorbertHi,
Would help to know the version of the Exchange in your environment.
For Exchange 2003, please do the configuration on the send connector.
Expand ESM, Administrative Groups, Routing Groups, Connector, right click the send connector, select the Properties, in the Delivery Restrictions, please apply with the corresponding group.
For Exchange 2007, routing based on specific senders or a group is not supported in Exchange 2007 by design.
Thanks
Allen
Maybe you are looking for
-
Clusterware patch for 10.2.0.4
Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4.... why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware an
-
HT1414 it still wont work i have done everything
u guys need to fix my app store it keeps crashing when i go to my purchased items
-
How do i desactive the "of all the document" selection type of the "Path Selection Tool" ?
What i want is to be able to select via this tool a selected group of paths in the same layer and not from all my document!
-
Vista - gaming lag after creating a static ip
Using a W54G but my problem is with my wired computer Recently I have had friends not being able to find the server I create for a game we play called Rainbow Six Vegas. For what it's worth these same friends were connecting a week ago when it was un
-
Buffer of PCI-MIO-16E-1 acquisition card
I am using a PCI-MIO-16E-1 acquisition card, and in the manual it says that it has a FIFO buffer of 512 samples. Is this the total buffer of my card? (I guess it should be larger). If I take more samples than can fit in the buffer in a single acquisi