Only edit objects from package in local requests

Hello Experts,
could you help me please
a user has tried to transport a local request, I modified it by putting the target system, but when the user wants to release it, he gets the error massage "Only edit objects from package in local requests "
Thanks a lot

HI
Follow the steps.
1. Create a new transport request
2. Select include objetcts
3. Object list from request and select your tranport request
4. Release the Transport request and transport.
If don't work try this other case:
1. Run tcode SE01
2. Create a new "Transport of copies"
3. Into the request, choose menu "request/task -> object list -> include objects
4. Include your transport request
5. Add the target system and release the request.
If you get any error put here
Regards
William Neira

Similar Messages

Error : Only edit objects from package ZSD in local requests

Hi Experts,
We are modifying all Z-programs to unicode enabled programs in ECC6.0 Upgradation. While doing this we are not able to save it as a transportable request. It displays error as "Only edit objects from package ZSD in local requests".
So can anyone tell me how to save it as a transportable request.
Thanks,
Ranjith C.

Hi,
two ways:
1. change the transport type: create transport type copy in se01 and copy all mentioned objects to that transport
2. better way: correct development class and transport layer
case a. target system was not definied (not known to TMS) or is empty
case b. source system (original system for objects) not known to TMS
case c. objects assigned to local package (former local development class)
etc.
If you don't understand this explanation, just use one of Z transport layers showed in stms, by changing the transport layer in the definition of the package (se80) to shown in STMS (link name from source to targed system)
Kind regards,
Mirek

Only edit objects from package ZPACKAGE in local requests

Hi Experts,
I was adding a secondary index to a Ztable present in a package ZPACKAGE. When I tried to save in a workbench request, I got the error message "You cannot use request XXXXXX". I then created a local change request where the target system is not mentioned in the transport request. I was able to save the index and later I mentioned the target system. When I tried to release the transport request, I get the message "Only edit objects from package ZPACKAGE in local requests". Kindly suggest what can I do save the changes in a transport request and release it.
Thanks

Check out the transport layer and target system for that transport layer. As someone suggested, talk to your basis.
This is most common when you have the actual table in temp folder but the index stored in Zpackage.
I would first check my objects package to make sure that they are in right package. If everything @ right place, then i will check the package transport layer and software component then check the 'use access' of the package. if the package is good then check the transport path and target systems for each transport later.

Transport error: "Only edit objects from package CL in local requests"

I have made changes to an SAP original program as per Note 1096366 on SAP's service web site. The program is an Include program (LCLCMFMZ). I have assigned it a transport number, but it keeps trying to make the target local. When I change the target to DEV, it will not transport and I get the following error:
"Only edit objects from package CL in local requests"
Does anyone know what this error means?
Thanks.

Thanks Nick,
but I think I have figured it out. I needed to create a transport of copies (from se09) and include this object in that transport (right click and choose 'Include object...'). Then back to se01 and display all transportable object (including transport of copies). Then select my transport of copies, choose a target system (from double clicking and going to properties). Only then would it let this object get transported.

Error "Only edit objects from package /VIRSA/ZVIR in local requests"

Hey, SAP gurus,
After I applied OSS note 1149445 in our Dev box to fix the bug in program /VIRSA/ZVFAT, I had problem to realease the transport. I got the error u201COnly edit objects from package /VIRSA/ZVIR in local requestsu201D.
u201CObjects in package /VIRSA/ZVIR cannot be edited in transportable Workbench requests in the current Dev system. The transport routes are configured such that objects from package /VIRSA/ZVIR can only be edited in local Workbench requests.u201D
What can I do to release the transport and move it to our QA box?
Thanks in advance!
Fisher Li

My co-worker and I followed SAP instruction on this one and solve the issue.
We created a "transport of copies" by using Transaction SE01. Go to the request overview and choose Request/task -> Object list -> Include objects to include the "child transport number of my transport" in this "transport of copies". Add the target system and release the change request.
Thanks!
Fisher Li

Edit objects from package ztms in local request

Hi ,
I am checking Inconsistancy check for a Transport Request, it showing error as , " Edit objects from package ztms in local request.". can anyone please help me in resolving this error.
regards,
Govind Nagotla

Hi,
the reason may be, that development class ZTMS has an invalid or unknown transport layer in table TDEVC (look at field PDEVCLASS), or the whole class is unknown in your system, if the object comes from a foreign home system!
Regards,
Klaus

Import only one object from transport request

Hello,
I have a transport request with some programs. I've not imported this request yet. And I would like to import only one program or just look at its source code. Is it possible with help of any standart SAP functionality?
Thank you in advance,Sergey.

Hi,
Go to SE10 and display the transports for your username. Select the task number (not transport no.) and hit display object list icon. There you will see all the objects in the task. Hit change button and you will see delete icon enabled. You may select the objects you do not want to transport and delete it from the task.
Version > 4.6C may have different screens but still the functionality is available
Raj
Reward points if helpful

Transfer object from package $TMP

Hi gurues,
I need trasnfer objects in $TMP package to another new pakage (because I need transport them)
Can someboy explain me (as detailled as possible) how create a new Order Request /Package
and how transfer fromt $TMP to the new ?
Thank you very much!!!

Hi,
If you want to create new Package then go to SE80 T-code and create there.
To create new request go to RAS1-- Transport - select Object type -Select the object which you want to transport-select Transferred selection - before that give grouping and collection mode-there you will have option called Package select that and give your package after that it will ask you to create request.select create and give discretion and select save button.
Transporting : Go to SE09 and transport task first and then transport Request.
Ali.

Accessing outer class memebers (objects) from inside a local class

Why is it neccessary that any Member-Object reference of the Outer class, or rather even the Object references defined inside the method, which contains the local/anonymous class, has to be declared as "final" if the reference is tobe used inside the definition of the inner class??

This feature of Java has often annoyed me. The Java Tutorial simply says "A nested class declared within a method or other smaller block of code has access to any final, local variables in scope", without explanation.
I can think of a partial explanation: if inner classes could access non-final variables, this code would compile:
void aMethod()
int x = 5;
// button is a member variable of this class
button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
x = 6;
but actionPerformed may be called long after aMethod returns and x ceases to exist, resulting in an exception.
However, requiring that x be final doesn't solve all problems. You wouldn't be able to write x = 6 if x was final, but you would be able to write System.out.println(x), which is equally problematic.

Ojects from Package cannot be transported

Hello,
When I try and release a transport request, I get the following message.
Objects in package ZXI cannot be edited in transportable Workbench requests in the current system DXA. The transport routes are configured such that objects from package ZXI can only be edited in local Workbench requests.
the configuration of the transport routes must be corrected in the Transport Management System (TMS).
Kindly help me add this package to the transport routes.
Currently the Transport layer in STMS has name ZDXA.
Please advise.
Thanks.

While creating a package you have to specify teh transport layer.

Multiple object is not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"

Can you help someone to get multiple object using "Edit Objects" from "Acrobat X Pro" to "Photoshop CS5"? Refer below:
Selecting the multi object (Acrobat X Pro):
Click Edit Objects => Displays below option, click OK:
Opened only one object instead of above multiple selected - in Photoshop CS5
Thanks in advance,
Pasumalai J

Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai

How to remove an object from an article

Hi all,
newbie here, sorry. I searched this forum for an answer, but I couldn't find it. So here it is....
I created a folio with 3 articles. After changing something I always update the article. But sometimes it will upload not only all objects from that article to the digital publishing site, but also objects (files) that are in/from another article. In my case I used a video in article 1, I changed something in article 3 and I updated article 3 to my folio. When uploading object (files) for article 3, I spotted the video I used in article 1!! This video doesn't belong in article 3, I don't use it there. But it will enlarge article 3 quite a bit and with this my entire folio will become much larger, which is completely unnecessary!
Is there any way to delete parts(/objects/files) from an article that are not really used in the article? Without affecting the rest of the (working) article of course....
Any help would be appreciated!
Ton Janssen

Hi there,
this seems to do the trick....I put all the HTML files and supporting documents etc for one article in a separate folder and now it seems to work well.....thanks a lot for your help!
Ton Janssen

Getting error while passing implicit request object from JSP to JavaBean

Hi,
I am getting error while passing implicit object ie( request object)
from within JSP to JavaBean.
Following is source for JSP, JavaBean and Error message I am getting.
vaLookup.jsp Source
<jsp:useBean id="db" class="advisorinsight.javabeans.DisplayPages"
scope="request">
<jsp:setProperty name="db" property="request" value="<%= request %>"
/>
</jsp:useBean>
<jsp:getProperty name="db" property="totalrecords" />
JAVABEAN DisplayPages.java source
package javabeans;
import java.io.Serializable;
import javax.servlet.http.HttpServletRequest;
public final class DisplayPages implements Serializable {
private String totalrecords;
private HttpServletRequest request;
public void setRequest(HttpServletRequest req){
this.request = req;
public java.lang.String getTotalrecords()
this.totalrecords =
this.request.getParameter("totalrecords");
return this.totalrecords;
public DisplayPages(){
totalrecords = "";
request = null;
error after executing vaLookup.jsp
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service JavaExtData successfully loaded
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service LockManager successfully loaded
[30/Nov/2001 11:56:04:5] info: EXTMGR-006: GXExtensionManager: Extension
service RLOPManager successfully loaded
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:5] info: REQ-012: thread add
[30/Nov/2001 11:56:04:7] info: ENGINE-ready: ready: 10819
[30/Nov/2001 11:56:46:0] info: --------------------------------------
[30/Nov/2001 11:56:46:0] info: JSPRunnerSticky: init
[30/Nov/2001 11:56:46:0] info: --------------------------------------
[30/Nov/2001 11:56:51:7] error: Exception: SERVLET-compile_failed:
Failed in compiling template: /va/valookup.jsp, javac error:
c:\iplanet\ias6\ias\APPS\variabl
S\va\valookup.java:76: Undefined variable: JSP_8
db.setRequest(_JSP__8);
^
1 error
Exception Stack Trace:
java.lang.Exception: javac error:
c:\iplanet\ias6\ias\APPS\variableannuity\va\WEB-INF\compiled_jsp\jsp\APPS\va\valookup.java:76:
Undefined variable: JSP_8
db.setRequest(_JSP__8);
^
1 error
at
com.netscape.server.servlet.jsp.JSPCompiler.compileJSP(Unknown Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileOrLoadJSP(Unknown
Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileInstance(Unknown
Source)
at
com.netscape.server.servlet.jsp.JSPCompiler.compileInstance(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callJspCompiler(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callUri(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformHttpServletResponse.callUriRestrictOutput(Unknown
Source)
at
com.netscape.server.servlet.platformhttp.PlatformRequestDispatcher.forward(Unknown
Source)
at com.netscape.server.servlet.jsp.JSPRunner.service(Unknown
Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown
Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)

The only thing that I see that looks funny to me is when you pass the request object into the method using <%=request%>, Im not sure whats going to happen here because that is suppose to print the results. Have you tried simply using <%request%>?

Package and local object?

Hello Gurus,
While crating condition table(M/03), I am selecting field combinations(vend, plant, matl etc). After that, I am clicking on Generate button, it is asking me package name(pop up window). If i m avoiding that and clicking on local object, it is allowing me to create condition table.
My doubt is :
what is the use package name and local object in this context and why it is asking?

Hello,
You have to assign all the transportable development objects to any package (formerly called Development Class) and then only it becomes transportable. If you assign to $TMP package, then it will become local oject which is not transportable and no change request will be generated when your try to save the object.
Package is nothing but a logical grouping of development objects.
Thanks,
Venu

DataSource from a productive package to local package

I need to move a DataSource from a productive package (ZUPG) to the
local package ($TMP). From transaction RSA6, I've chosen the "Object
Directory" and tried to change the assignment.
However. the system prevents the user from moving an object from a
productive package to a local or test package. This is the message you
would get if you tried and changed the package to $TMP:
"Object R3TR OSOA 0REGION_TEXT has already been exported and is
therefore known in other systems. It is therefore not possible to
change the package from productive to local (private), since
inconsistencies and errors can occur."
In theory, this should be circumvented by deleting the DataSource, and
releasing the change request thereafter. The DataSource's entry in
TADIR should get deleted and it should be possible to choose the
package $TMP when re-activating the same DataSource again in the system.
However, this is not the case in my system. The entry is not deleted
from the TADIR, even after having released the request which contained
the (deleted) DataSource!
The question is: what could have caused such an inconsistency in
the system's TADIR? Why the entries aren't deleted after releasing the
change request, even though the DataSource had been deleted from the
repository?
Thanks!
Simo

Hello Kris,
unfortunately your suggestion doesn't work.
As Simone explained in his first message, in fact the system prevents the user from changing the DataSource's directory entry, with the following error message:
<i>Object R3TR OSOA 0REGION_TEXT has already been exported and is therefore known in other systems. It is therefore not possible to change the package from productive to local (private), since inconsistencies and errors can occur.</i>
The system documentation proposes the following steps to switch an object to a local package:
<i>1. Use the appropriate editor to copy the object to a local object with a different name.
2. Then delete the old object. A change request is used to transport this deletion to the other systems.</i>
Finally it is possible to rename the local object.
In other words, the DataSource is in a productive package, and it's been registered in a transport request.
As soon as an object is inserted in a productive package, you're not allowed to move it back to a local or test package anymore. You need to delete it, release the change request and recreate (re-activate in our case) the object again.
However, the system doesn't prompt the user for a package during re-activation (please refer to my previous post), because the involved entry in TADIR is not removed from the transport request at release time.
Cheers, <a href="https://wiki.sdn.sap.com/wiki/display/profile/Davide+Cavallari">Davide</a>

Only edit objects from package in local requests

Similar Messages

Maybe you are looking for