Only ONE contact not working for Messages?

Hi All,
Hope you can help me with this one... and please, I'm hoping for input from as many who have an idea, so please don't feel like there's no need to jump in on this even if there's someone else here posting with a solution. These threads are most useful with more than one insight. I'll try them all.
So, here it goes...
We've got an iPhone 4s on one end... and probably (but I'm not certain) an iPhone 4s at the other (could be an iPhone 4).
On both ends, both users can send texts and SMS/MMS messages to everyone else in their respective phone books. They can also send each other emails successfully. But they cannot -- on either end -- send each other Messages (SMS/MMS or regular Messages).
On both ends, the other user comes up as a red contact and the messages bounce back "not delivered."
And we can't, for the life of us, figure out why.
ALSO, in case it means anything, only this ONE contact comes up as red when typed into Messages on the companion Macbook. So it's not just the iPhone on our end that's an issue. (NOTE: I'm only at one end of the chain here, helping my mother-in-law with her phone. Her daughter is at the other, several States away. So we can't see what she's got going on with her phone.).
Here's what we've tried so far, with no luck (so jump past any recommendations that include the following, please):
1) On both ends, we have deleted and recreated Contact cards.
2) I logged out of iCloud, allowing it to delete the local contact cards etc. and logged back in.
3) I logged out of the Messages account on this end and then logged back in.
4) On both ends, we've checked to make sure neither contact is blocked (well, on this end anyway... on that end, they say they have but we're not sure if they're doing it right).
Note: I have NOT reset the Network Settings... but only because all other contacts but this one are working.
Any ideas, guys?
Thanks in advance.

Thanks... and then for the suggestion to sign out and sign back in. I've already done that though (see #3 in my original post... that's what it meant). And I've already sent a link to the person with the other phone, suggesting she do that too. Also thanks for the point on the MacBook not being able to send SMS. Good point.
That said, yep... I'm sure I'm not trying to send an SMS. Even so, that would at least go in green... right? But we cannot send either SMS or iMessage from this end. When I open a new Message... and type in the contact name... it goes red. Just red. As though it's already unreachable. Even though it's the right number and the right email address. I would at least expect that it would, if she weren't registered to iMessage, be deliverable as an SMS (green)... but no.
Here's the process, if it helps:
I open a new message and type in the address -- it goes red (already a sign of trouble).
Then I try to type in a message anyway. It goes green.
Then I hit send and get back a "Not Delivered" error.
Same on her end.
Now, here's something interesting.... I'm typing to you now on a different machine, running under a different administrator (me) and I've just tried to send a message to the same two recipients. One, my mother-in-law's, works just fine. The other, my sister-in-law's ALSO goes red on my machine.
Hmm.
Question: You say "I would suggest you both go to Settings > Messages > Send & Receive, sign out and sign back in. Also make sure that the addresses that you are trying to reach each other at are listed there."
By this, I'm assuming you only mean that each person's sending and reachable addresses are listed in the settings, right?
I guess it's possible she never set that up (on the other end) but she says she can text fine with everyone except her mom.
On the other hand, why would her email address go red in my new Message window too?

Similar Messages

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

Share tool not working for Messages

When I attempt to use the Share tool for a photo in my camera roll, and I select the Messages option, first the message input screen delays for a few seconds. Then after the delay unfreezes and I'm able to type or tap Send, it seems like no message is sent. Because when I check the conversation chain back in the Messages app there is no message for the photo I attempted to share. This isn't supposed to be the case right? I should see the shared photo as part of my Messages history, right? I noticed this problem started occuring last week. I don't recall exactly when I updated to iOS 7.1.1 or if there was any problem immediately after updating.

Thanks... and then for the suggestion to sign out and sign back in. I've already done that though (see #3 in my original post... that's what it meant). And I've already sent a link to the person with the other phone, suggesting she do that too. Also thanks for the point on the MacBook not being able to send SMS. Good point.
That said, yep... I'm sure I'm not trying to send an SMS. Even so, that would at least go in green... right? But we cannot send either SMS or iMessage from this end. When I open a new Message... and type in the contact name... it goes red. Just red. As though it's already unreachable. Even though it's the right number and the right email address. I would at least expect that it would, if she weren't registered to iMessage, be deliverable as an SMS (green)... but no.
Here's the process, if it helps:
I open a new message and type in the address -- it goes red (already a sign of trouble).
Then I try to type in a message anyway. It goes green.
Then I hit send and get back a "Not Delivered" error.
Same on her end.
Now, here's something interesting.... I'm typing to you now on a different machine, running under a different administrator (me) and I've just tried to send a message to the same two recipients. One, my mother-in-law's, works just fine. The other, my sister-in-law's ALSO goes red on my machine.
Hmm.
Question: You say "I would suggest you both go to Settings > Messages > Send & Receive, sign out and sign back in. Also make sure that the addresses that you are trying to reach each other at are listed there."
By this, I'm assuming you only mean that each person's sending and reachable addresses are listed in the settings, right?
I guess it's possible she never set that up (on the other end) but she says she can text fine with everyone except her mom.
On the other hand, why would her email address go red in my new Message window too?

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

HT4972 My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

Imessage is not working for one person

My imessage is not working for one person.
Its been like this for about 2 days
I have an iphone 5
imessage is on
both phones reset network settings,deleted and remade contact, etc.

Does the other person have iMessage on, too? Is the specific phone number/address you are trying to reach them at show up for them in Settings > Messages > Send & Receive?

Deleted messages remove after one day (one week, one month) not working

Has anyone noticed that since the upgrade to iOS 7 automatic email cleanup does not seem to be working?
I have an IMAP email account set up with the following setting: Settings > Mail, Contacts, Calendars, [then tap the email account in question] > Account > Advanced > Deleted Messages Remove > After one week
I have had that configuration on my iPhone and iPad for a very long time, and it always deleted everything out of my deleted messages folder (which, on my system, is called Trash) that was older than one week. It would do this no matter when the message was actually deleted, and no matter whether I deleted it on my iPhone, my iPad, on a computer using Outlook, or through a web interface. (It actually would have been nice to retain a message I had just deleted for the one-week period in case I changed my mind; instead the way it worked was if I deleted a message that was received months ago, it would be removed from Trash almost right away. But it worked consistently.)
Now, since iOS 7, it does not appear to be cleaning out that folder at all. Has anyone else noticed this?
I'm not sure if it's not removing any messages, or if it's just not removing messages I delete on another platform (like Outlook). So today I've done a test with a specific message that I will watch over the next little while to see how it works. But in the meantime I thought I'd ask if anyone else has noticed this, and if there is a solution.

Really nobody?
Is this working properly for people? It's not working for me on either my IMAP account or on an iCloud email accout, so I think iOS 7 broke something here. I've submitted a bug report on the feedback form, but it would be nice to know I'm not alone.

Only one UPN suffix works with OAM plugin for RSA-integrated Authentication

Only one UPN suffix works with OAM plugin for RSA-integrated Authentication while others give "CredentialsRejected" error
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-
Has anyone seen this before and might know the answer? Any suggestions? Thanks!
I have setup an OAM authentication scheme that uses a custom plugin to use RSA ACE server - all pretty much exactly as it is outlined in the chapter called "Integrating the RSA SecurID Authentication Plug-in" in Oracle Access Manager Integration Guide. Here's the problem:
Everything works fine when I use a particular UPN suffix to login to the RSA Securid Login form that is presented, eg. [email protected], but if I create another user that uses a different UPN suffix as defined in Active Directory, (eg. [email protected]), the credentials are rejected. This happens before the secuirid.pl script even gets a chance to run. After hitting "POST" the user is present with the same login screen he was just at, as expected during an authentication failure.
More info:
- I have performed successful anonymous ldap queries for both users in Active Directory using LDP. Both users exist in the same domain and in the same OU. If I change the UPN (in AD and the RSA database) to something different from the "good" one, on either user, it fails. If I change the UPN to the "good one" on either user (in AD and the RSA database) it works.
- if I test users with either the "good" or the "bad" UPN via the RSA agent tester that sits on the OAM box, both of them show as authenticating successfully. However, it doesn't work for the "bad" UPN when I try to access via a web browser on a remote client (but does work with the "Good" UPN)
- I am not using SSL in any of this yet, it's all http://
- yes, I already got rid of the "-w" parameter in the first line of the perl script, as per the "login can fail if the Login Attribute Contains an "@" Character in Integration Guide Troubleshooting section
- here's an example of the settings in rsa securid authentication scheme:
action:/OracleAccessManager/securid-cgi/securid.pl
form:/OracleAccessManager/securid-forms-adforest/securid-std-login.html
creds:login password domain newpin newpin2
passthrough:yes
authn_securid fullformdir="C:\apache\Apache2\htdocs/OracleAccessManager/securid-forms-adforest/",machine="MyComputer.mydomain.com:80"
credential_mapping obMappingBase="%domain%",obMappingFilter="(&(objectclass=user)(userPrincipalName=%login%))"
Environment:
OAM 7.0.4.3
RSA Ace Server 5.2
Windows 2003 domain with multiple UPNs defined in Active Direcory Domains and Trusts
Error as seen in the oblog.log for the webgate on the server that holds the RSA login pages and perl script:
Message^A plugin for the authentication scheme SecurID Authentication has denied authentication for credentials ([email protected]
password=(omitted) domain=dc=ourdomain,dc=com newpin= newpin2= Resource=/OracleAccessManager/securid-cgi/securid.pl RequesterIP=10.250.1.2 Operation=POST).
ReqReq^POST /OracleAccessManager/securid-cgi/securid.pl HTTP/1.1 ReqProto^HTTP/1.1 ReqHost^www.MyComputer.mydomain.com. ReqStatLine^
ReqStatus^200 ReqRawUri^/OracleAccessManager/securid-cgi/securid.pl ReqUri^/OracleAccessManager/securid-cgi/securid.pl
ReqFilename^C:/apache/Apache2/htdocs/OracleAccessManager/securid-cgi/securid.pl ReqPath^ ReqArgs^
2009/07/13@15:19:49.665000 45688 46472 AUTHENTICATION ERROR 0x00001515
\Oblix\coreid\palantir\webgate\src\authentication_event_handler.cpp:1361 "Authentication failed" HTTPStatus^401
authenticationSchemeName^SecurID Authentication AuthenticationStatus^majorCode = 11[CredentialsRejected], minorCode = 47[AuthnPluginDenied],
StatusMsg = , GSN = 0, needInfo = NONE Creds^[email protected] password=(omitted) domain=dc=ourdomain,dc=com newpin= newpin2=
Resource=/OracleAccessManager/securid-cgi/securid.pl RequesterIP=10.250.1.2 Operation=POST
Only error seen in log produced by the RSA agent that sits on the Access server:
[20804] 12:27:08.915 File:ACNETSUB.C Line:326 # CheckServerAddress: server 0 detected from address 10.250.88.100
[20804] 12:27:08.915 File:udpmsg.c Line:968 # Entering decrypts_ok_legacy()
[20804] 12:27:08.915 File:udpmsg.c Line:999 # decrypts_ok_legacy: decrypt() wpcode1 failed; wpcode0 next ***********
[20804] 12:27:08.915 File:udpmsg.c Line:1089 # Leaving decrypts_ok_legacy(), result=1
[20804] 12:27:08.915 File:ACEXPORT.C Line:820 # Entering AceGetUserData()
[20804] 12:27:08.915 File:ACEXPORT.C Line:833 # Leaving AceGetUserData() return: ACE_SUCCESS
[20804] 12:27:08.915 File:ACEXPORT.C Line:579 # Entering AceGetAuthenticationStatus()
[20804] 12:27:08.915 File:ACEXPORT.C Line:592 # Leaving AceGetAuthenticationStatus() return: ACE_SUCCESS

What are the logs you see at the ACE server end? You can try passing an additional parameter debug="true" to the authn_securid plug-in - it should generate some more logs at the access server - I think in apps\common\bin.
Also does "ReqHost^www.MyComputer.mydomain.com" look right in the logs?
-Vinod

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and thats the only email address I have... What can I do?

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

CFL Not working for one of my UDF

Hi,
I have created one UDT.
I have created UDO for it. I also designed the screen in screen painter. In particular form i have created 3 CFL's. i have assigned to three of my UDF's. But only two or working. and another one is not working. I followed the same procedure for assigning the cfl to each field.
Kindly help me in this situation.
Thanks In Advance.

sishir,
Can u tell me the code then only i can able to give u the solution. How u define the CFL ???
Regards,
Anitha

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

SPSecurity.RunWithElevatedPrivileges Not Working for Read Only Permissions Users

I have the following code in a method that generates tabbed web parts on any page in SharePoint 2010.
The problem is that it will not work for users who have Read access only on a SharePoint site. It will work when those users have Contribute access.
So even though I have elevated permissions in the code it does not actually elevate the permissions at the point where it is needed.
if (panel != null)
try
using (SPLimitedWebPartManager wpManager = SPContext.Current.Web.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
try
// Elevated previleges required for EXPORT and IMPORT. Else Users with normal read access will get errors.
SPSecurity.RunWithElevatedPrivileges(delegate()
// Retrieve the web part titles in the ConfigureTabs XML string for this tab.
var webPartTitles = from t in xDocument.Descendants("webPart")
where (string)t.Parent.Attribute("name") == (string)e.Item.DataItem
select (string)t.Attribute("title");
foreach (string wpTitle in webPartTitles)
foreach (System.Web.UI.WebControls.WebParts.WebPart webPart in wpManager.WebParts)
// Find the matched closed web part in WebParts collection
if (webPart.Title == wpTitle && webPart.IsClosed == true)
string errorMessage;
//ADD EXPORT PROPERTY
webPart.ExportMode = WebPartExportMode.All;
MemoryStream stream = new MemoryStream();
XmlTextWriter writer = new XmlTextWriter(stream, System.Text.Encoding.UTF8);
// Export the closed webpart to a memory stream.
wpManager.ExportWebPart(webPart, writer);
writer.Flush();
stream.Position = 0;
XmlTextReader reader = new XmlTextReader(stream);
// Import the exported webpart.
System.Web.UI.WebControls.WebParts.WebPart newWebPart = wpManager.ImportWebPart(reader, out errorMessage);
reader.Close();
writer.Close();
// Show the imported webpart.
panel.Controls.Add(newWebPart);
break;
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please check your XML configuration for error. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please Check SPContext.Current.Web is not null. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
This snippet of code was originally pulled from a microsoft technet article on creating Tabbed web parts "the correct way" but it doesn't work in all scenarios.
Is there a way to get this code working for Read/Visitors to a SharePoint site?

From initial observation what I see is that your SPLimitedWebPartManager is not created from an elevated web. Try like below
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite elevatedSite = new SPSite(SPContext.Current.Site.ID))
using(SPWeb elevatedWeb = elevatedSite.OpenWeb())
using (SPLimitedWebPartManager wpManager = elevatedWeb.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
{ //Rest of your code
Geetanjali Arora | My blogs |

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

Only ONE contact not working for Messages?

Similar Messages

Maybe you are looking for