Only one language pack available

So i searched how to change language of my interface and all but the problem is that i doesn't show me an option like install a language pack. When i tried to change the language pack it shows that this option in not available in this version of windows.
So what should i do? By the way the interface is in russian and i'd like it to be in english.

Hi Metmieru.
Did you, by any chance, upgraded from 8 to 8.1?
If so, please check this article:
Language packs are no longer available after upgrade to 8.1
Hope this helps.
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Similar Messages

Language pack available in OIM 10g

Hi,
Can any tell me about the different language pack available in OIM 9.x.X
I have an requirement to change the default English language to some other language e.g chinese language . Is this possible?
In case of provisioning can I enter different language in database and how it will be interpreted by the target if using SPML based provisioning?
Thanks!

Hi Metmieru.
Did you, by any chance, upgraded from 8 to 8.1?
If so, please check this article:
Language packs are no longer available after upgrade to 8.1
Hope this helps.
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Only one language for LibreOffice?

In the past I have managed to have multiple languages available in LibreOffice with their appropriate spellcheckers working. I prefer to use English as my interface language (always) and sometimes other languages in the documents. This doesn't seem to be possible anymore. I have the desired language packs installed as well as all the required spellcheck tools (at least as far as I know). For some reason only the US English language is available in the language settings. If I remove the US English language pack, the interface language obviously changes, but still the only available spellchecker is US English in the languages menu.
Here is the pacman -Qs output with string "libreoffice":
pacman -Qs libreoffice
local/libreoffice-base 4.0.2-3 (libreoffice)
GUI database front-end for LibreOffice. Allows creation and management of
databases through a GUI.
local/libreoffice-calc 4.0.2-3 (libreoffice)
Spreadsheet application for LibreOffice.
local/libreoffice-common 4.0.2-3 (libreoffice)
common files for LibreOffice - a productivity suite that is compatible with
other major office suites
local/libreoffice-draw 4.0.2-3 (libreoffice)
Drawing Application for LibreOffice.
local/libreoffice-en-US 4.0.2-3
English (US) language pack for LibreOffice
local/libreoffice-extension-ct2n 3.4.5-2 (libreoffice-extensions)
This extension enables you to convert text-cells in Calc with numbers and
dates, to real numbers and dates.
local/libreoffice-extension-diagram 3.4.5-2 (libreoffice-extensions)
An OOo Draw and Impress extension that creates your favorite diagrams with a
few clicks
local/libreoffice-extension-google-docs 3.4.5-2 (libreoffice-extensions)
Google Documents extension for LibreOffice
local/libreoffice-extension-hunart 3.4.5-2 (libreoffice-extensions)
Hungarian cross-reference toolbar extension
local/libreoffice-extension-nlpsolver 4.0.2-3 (libreoffice-extensions)
This extension integrates into Calc and offers new Solver engines to use for
optimizing nonlinear programming models
local/libreoffice-extension-oooblogger 3.4.5-2 (libreoffice-extensions)
An extensions for blogging
local/libreoffice-extension-presentation-minimizer 4.0.2-3 (libreoffice-extensions)
This extension reduce the file size of the current presentation
local/libreoffice-extension-report-builder 4.0.2-3 (libreoffice-extensions)
This extension creates smart-looking database reports
local/libreoffice-extension-scripting-beanshell 3.4.5-2 (libreoffice-extensions)
LibreOffice extension - Enables support for scripts in BeanShell
local/libreoffice-extension-scripting-javascript 3.4.5-2 (libreoffice-extensions)
LibreOffice extension - Enables support for scripts in JavaScript
local/libreoffice-extension-typo 3.4.5-2 (libreoffice-extensions)
Typography toolbar extension
local/libreoffice-extension-validator 3.4.5-2 (libreoffice-extensions)
Validator extension for LibreOffice
local/libreoffice-extension-watch-window 3.4.5-2 (libreoffice-extensions)
A OOo Calc extension to add a Watch Window, which keeps the value of the
monitored cell on the screen.
local/libreoffice-extension-wiki-publisher 4.0.2-3 (libreoffice-extensions)
This extension enables you to create Wiki articles on MediaWiki servers
without having to know the syntax of the MediaWiki markup language
local/libreoffice-fi 4.0.2-1
Finnish language pack for LibreOffice
local/libreoffice-gnome 4.0.2-3 (libreoffice)
Plug-in for LibreOffice that enables integration into the Gnome and other
gtk desktop environment.
local/libreoffice-impress 4.0.2-3 (libreoffice)
Presentation Application for LibreOffice.
local/libreoffice-kde4 4.0.2-3 (libreoffice)
Plug-in for LibreOffice that enables integration into the KDE4 desktop
environment.
local/libreoffice-math 4.0.2-3 (libreoffice)
Equation Editor Application for LibreOffice.
local/libreoffice-postgresql-connector 4.0.2-3 (libreoffice)
A PostgreSQL connector for the database front-end for LibreOffice
local/libreoffice-sdk 4.0.2-3 (libreoffice)
Software Development Kit for LibreOffice.
local/libreoffice-sdk-doc 4.0.2-3 (libreoffice)
Software Development Kit documentation for LibreOffice
local/libreoffice-writer 4.0.2-3 (libreoffice)
Word Processor Application for LibreOffice.
local/voikko-libreoffice 3.4-1
Finnish spellchecker, grammar checker and hyphenator extension for
libreoffice
Any ideas? What am I doing wrong?

Hunspell is installed. One of the languages I'm using is Finnish and its spellchecker is from the AUR.
Another problem has emerged: Now the whole LibreOffice crashes when I am okaying the changes in the language menu.
Last edited by raavas (2013-05-04 07:32:08)

Weblogic is using only one of the available cpus!

Hi all, I have this problem: weblogic application server 9 mp2 on a linux server with 4 cpus is using only one cpu. The jvm seems to be pinned on one cpu.
Is there something to set or a particular jvm parameter? I'm using the jrockit jvm.
Thanks
Marco Strullato

Firefox is 32 bit if you want to use all 8 cores you can use a 64 bit variant of firefox such as
* Waterfox - http://www.waterfoxproject.org/
* Nightly 64bit - http://forums.mozillazine.org/viewtopic.php?t=2239223&f=23 (Linux Only)
'''NOTE:''' Both of these versions of firefox are unstable and may combust.

Multi Language- Picklist fields are displayed only one language for Reports

Hi!
I am working on Siebel On Demand with Multi Language (English and Spanish) and it works well for web interface, the automatic translation for picklist works properly.
However when I create any report (with any Record Type) the fields setup with picklist are displayed only in spanish language even though I am on English mode.
Have you any reference(s) or previous experience(s) on that?
Thanks in advance
Mtb

Hi,
in reports the language of the picklists corresponds always to the company default language.
The only solution I now (its really static and not so nice):
Create one report per language and change the picklist field by using CASE statements...you see its hard to refresh if you have lots of values :)
cheers
Myriam

Using sequence as source, but only one audio track avail

So I have created a "raw" sequence containing multiple source clips. The source clips have 4 channels of audio and 1 channel of video. When I create my sequence, I see all of my channels....great.
However, when I load the "raw" sequence into the source monitor...I no longer have access to my 4 channels of audio independently. I simply get one audio source track and the audio is mixed....as it appears in the timeline.
When I create a new "raw" sequence, I select multichannel for the master. I've tried every track type (mono, standard, adaptive)...and still I only get one audio channel when the sequence is loaded into the source monitor.
I watched several tutorials about nesting, but there is little discussion about multiple audio tracks.
Thanks...

Its kind of the point of using a a nest. ( a pre comp if you like)
Nothing stops the editor going back to the source of the nest to work on the individual assets. These will update automatically into the nest.

Purchased whole album but only one song available for download

Some time ago purchased album Vēl Viena Klusā Daba by Prāta Vētra. From the whole album only one song is available for download.
Tried to delete and re-download. Remaining songs also not available under downloadable items.

Hey there Egils1969,
It sounds like you have purchased an entire album but for some reason only 1 song is available for download. I would report a problem with your purchase to the iTunes Store support directly with this website:
https://reportaproblem.apple.com
Thank you for using Apple Support Communities.
Cheers,
Sterling

Confirm that language packs are unnecessary for English

My Linux distro came with Firefox ESR and language packs pre-installed (Also Thunderbird and language packs). There are two package entries in the software manager for each of these applications: the main program and the language packs, which indicates that all languages in the language packs are installed/removed as one unit. The online description says the language packs are used for "additional languages". It doesn't say what the "standard" language(s) is/are or whether all languages require some language pack. I use English. Before uninstalling the language packs for both products, I want to confirm that they are not needed for English. Thanks.

Yes, you do not need the extra language packs.
Also note that all languages are available as separate installers, so you would only need language packs if you want to install more than one language and want to switch between them.
Note that your Firefox 24.4.0 ESR version is outdated and compares to 28.0 and that the current release is 24.8.1 that has the same security patches as the current 32.0.3 release.

Language Packs for Crystal XI?

Are there language packs available for Crystal Reports XI Professional? I'm particularly looking for Polish. We use our Crystal in a Citrix environment. People in Spain see Spanish when they use it, the English see English, Germans see German, but since Polish isn't a default language the Polish users see English as well.
If I could get a language pack it would help.
Thanks.

Hi Juan,
We have a samples for CRXIR2 in Polish
can be downloaded from here:
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Select Product :Crystal Report
Version :XIR2
Software type optional:*
have a look in sample ,language
We can upgrade Crystal reports from CRXI to CRXIR2
from here:
Upgrading CRXI to CRXIR2
I would like to inform you that VS 2005 is only compatible with CR XI R2 and CR 2008
To download the CR XI R2 follow the instructions given below:-
Crystal Reports XI is installed on your computer. You need to manually uninstall Crystal Reports XI for one of the following reasons:
u2022 To verify that all Crystal Reports XI components have been completely removed prior to installing a later version of Crystal Reports.
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the 'Add/Remove Programs' command (Start > Settings > Control Panel).
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the Setup.exe file from Crystal Reports XI installation CD.
How do you manually uninstall Crystal Reports XI?
Resolution
Before getting started, uninstall Crystal Reports XI by launching the Setup.exe file from the installation CD or by using the 'Add/Remove Programs' command. If either of these methods fails to remove all Crystal Reports directories, files and registry keys, then continue with the resolution of this article.
==========
WARNING:
This resolution can be applied if Crystal Reports XI is the only software installed on the computer that uses the Business Objects directories, files and registry keys.
For example, Crystal Analysis, Crystal Enterprise and BusinessObjects Enterprise XI are applications that may share the same directories, files and registry keys.
Removing these directories, files and registry keys may cause other software to function incorrectly.
==========
1. To manually uninstall Crystal Reports XI, delete the following directories:
u2022 C:\Program Files\Common Files\Business Objects\3.0
u2022 C:\Program Files\Business Objects
====================
NOTE:
Do not remove the directory C:\Program Files\Common Files\Business Objects\3.0 if you have BusinessObjects Enterprise XI or Crystal Reports Server XI installed. These files are shared by both applications and removal of these files will cause Business ObjectsEnterprise XI and Crystal Reports Server XI to function incorrectly.
====================
2. Delete the following registry keys:
====================
WARNING:
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk.
HELP:
For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
RECOMMENDATION:
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
====================
u2022 HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
u2022 HKEY_CURRENT_USER\Software\Business Objects
u2022 HKEY_USERS\S-#-#-##-...-####\Software\Business Objects
(The number signs (#) represent a series of numbers that are different on each computer.)
====================
NOTE:
After making changes to the registry, restart the affected service or application as required.
After deleting the CR XI from the system install the CR XI R2 full build and provide the same key as you provided in CR XI.
Download CR XI R2 from [here|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Hope that helps!!
Regards,
Shweta

I'd like to use more than one language in Firefox 31. How can I do that? Thx

I use Firefox at work, and while I have admin privileges for my own laptop, whenever I connect to the server with an Ethernet cable, the server automatically reverts my Firefox and Thunderbird to French. I'm using Firefox 31.0 and Thunderbird 31.0 and I would like to be able to use them in English, and the only option I see is to install another UI language pack. I noticed there was a language button in the top right-hand corner of the Firefox toolbar, but there's only one language to choose from. Despite my efforts to search and install a British English addon that would do the trick, I couldn't find anything.
Thanks for your help,
R.

Thanks a lot Cor-el,
I actually want to use a different user interface language. I was able to install the spell-checkers and dictionaries previously, but I didn't know what to do with the UI language. I checked the links you kindly provided but apparently, the downloadable language packs are not compatible with Firefox 31, which they set up in my office. Is there any way to force the install?
I also checked out the locale switcher but since the language pack extension is not compatible with firefox 31... If you have time to spare, I would be very interested in finding out more about your desktop shortcut solution.
I use a mac at home, and language-wise it's so much better. My own profile is completely in English whereas my wife is in French, which simplifies things (I just made sure to tell her to use safari if she wants to browse in French!)
One solution I used in the past was to reinstall firefox in English, but I have to do that every time the IT guys update FF, and then, you don't want to stand out if you want to remain in their good graces.
Thank you very much for your help anyway,
Remy

Language Pack error

Hi,
I recently got CS4 and installed only Photoshop onto my Windows 7 machine.
After installing Dreamweaver today, I found that the program was installed with errors. I could not run the program. The language pack is missing or corrupted, The error message that shows says that it can't locate the resources folder in the configuration foler.
I had a similar problem with Photoshop, and to fix it, I found someone who had made a fixed language pack available and it fixed the problem. I unfortunately cannot find where I found that.
The problem with Dreamweaver has nothing to do with old scripts of CS3 running (this is a new machine, I have never owned CS3) and has nothing to do with a missing Public Documents folder. I also tried reinstalling the program on international english, but that just changed which language pack was missing. (no matter what I install, the error 2 message pops up. the only thing that changes between the US and International English is that the missing langpack is en_US or en_GB, respectively.)
My guess is that I just need a fixed language pack. Any suggestions?

I fixed the same problem in photoshop by adding a Locales folder with en_US in it that I found on the internet. This seems to be what I need to do in Dreamweaver, but adding the locales folder I used in photoshop doesn't seem to be working.
My theory is that the language packs did not install correctly. This seems to be a widespread problem on the internet, but nobody seems to be able to fix it. Any support for Dreamweaver from Adobe is outdated and irrelevent.

N96 (UK) Russian Language pack required

hi there i have a N96 with standard western European languages (dictionaries) and need to comminucate by SMS regularly with Russian colleagues - is there way I can add this to my phone? Have updated to latest firmware but does not offer extra languages. I also called a local Nokia Care Centre and they couldn't help.
Thanks in advance. Mike

I am surprised the Nokia Care Point said they couldn't help.
The N96 comes with different language packs for the different regions. You can install a language pack which contains Russian on your phone. You can only have one language pack on your phone at a time but this should not be a problem as English is on all the language packs.
However, please note that the language pack on your phone will revert back to the default everytime you reinstall or update the firmware on your phone.
Language packs can only be installed by Nokia Care Points, so contact them again and tell them we told you so.

How do I localize Flash CS5.5 iOS app to one language

What method or process do I use to set an iOS app to only one language?
I recently had an iPad app written in Flash CS5.5 approved at the iTunes app store. I noticed at the iTunes store, it indicates that my app is localized in 14 different languages. I never set this up; it seems that there is a process that automatically adds several default language localizations to the ipa binary when the file is published. I tried the strings panel, used a var to set the localID, went into the SDK for flex and flash builder and deleted the locales (could not find anything similar for Flash itself), but none of this seems to prevent Flash from adding the language defaults. I have found many examples on how to localize my app for several languages, but nothing on how to set it to only one.
Thanks much, Jon

Well, I followed the iOS language list in iTunes thread in this forum and was able to get rid of them all. I have to say that not any single reply in the thread was exactly right. It took a combination of Saumitra Bhave's and spinlight's replies and mass of trial and error to get it all to work. Even the App loader utility came up as obsolete! I have uploaded the updated binary to Apple and am awaiting their approval. The biggest issue is the placement of and actual coding in the entitlements plist; spinlight had the right idea, but, at least in my case, was coded out a bit different. Also, it was not exactly apparent that you had to use the teminal untility to recodesign the app after tearing it apart. Thank the heavens I have a least a basic understanding of how things work on the Mac and was able to puzzle it out. If Apple approves the app and all things look good, I will follow up here with what I did. Of course, if Adobe would kill this bug with a giant can of bug spray, this crazy work around wouldn't be needed...
Thanks much, Jon

Ipad 3 is syncing only one way with outlook 2010

I am seeing calendar items that I add in Outlook 2010 added to the Ipad. However, appointments added in Ipad are not being added to Outlook.
I have not checked contacts (All were added to the Ipad).But I have not tried adding a new contact yet.
Is this normal behavior? If not, how do I get it to work properly?
Pastor John

It appears that I can't edit my original question. So here is new information. It is syncing. However, the contacts are syncing with my personal folders. The calendar is syncing from Outlook to Ipad from my personal folders. However, the calendar is syncing to Outlook in a hotmail calendar in the profile that I didn't know existed. How do I get it set right.
I tried to select the calendar. However only one calendar is available in itunes. It must be the correct calendar as it is syncing fine. So how do I get ipad to sync back to the personal folders calendar instead of the hotmail calendar in my profile?
Pastor John

Where is a German language pack for Firefox 5.0 64bit?

Is a German language pack available for Firefox 5.0 64-bit?

There is the German version of Firefox 5.0 at http://www.mozilla.com/en-US/firefox/all.html however the Linux builds there are 32-bit as 64-bit are at http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-5.0/linux-x86_64/de/
Or if you do want a language pack it is at http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-5.0/linux-i686/xpi/ as '''de.xpi'''

Only one language pack available

Similar Messages

Maybe you are looking for