Only one spread visible on pasteboard (CS4)

Something weird happened to my indd file (a 128-page book) and although all the pages are all accounted for, only one spread is visible at a time: if I scroll up or down in the document window, there is nothing but blank space. I can access any other spread by double clicking in the Pages panel, and I can go forward or backward to the next spread using a keyboard shortcut I set up, but it is disturbing not to be able to scroll up or down to other spreads. I found a reference to this problem on another site (http://www.techplex.net/postst15582_weird-viewing-one-spread-per-pasteboard.html) where it was suggested that exporting as INX would fix the problem. I tried that and although opening an INX version did solve the scrolling problem, the text fell differently on the pages, so this was not a usable solution. Same thing for exporting as IDML. I don't know what accounts for the changes.
I'm hoping there's a simple way to get my scrolling back.

You've obviously got some corruption in your file. That is illustrated by the fact you are getting this problem, and also by the fact an inx or idml export fixes it. I would recommend biting the bullet and doing it otherwise something else could go wrong and your whole file might become unusable.
The text falling on different pages will be because of text reflow, sounds like the file was created in an earlier version and updated to CS4? The text wouldn't reflow according to CS4's different composer until you edited it, or did a inx/idml conversion like this.

Similar Messages

Only one song visible in List View

I can only see one song in list view with the album art visible. If there are 10 songs on the album they are all separated and show up individually. They used to be all together next to the album cover and now they are not. What do I have to do to get them together again?

Didn't solve the problem. If I have one album by an artist then all of the songs for that album are displayed next to the album art. But if there are multiple albums y an artist then only one or two songs are displayed next to the album art and each album shows up multiple times with with other songs, they are not all together and it is driving me crazy. Why would one album be listed multiple times with only one or two songs next to it? I can't figure out how to fix it.

How do I create a dropdown with three options so that only one is visible in a form (non-flowable)

I'm working on a form which needs to provides three options for the user out of a drop down list. When the user chooses one option, only that subform is to be visible. Two of the three subforms are text fields, and the third subform is a series of fields which are editable by the user.
How do i create a dropdown with three options in it, so that in each instance only one subform is visible? This needs to happen in the same space on the main form.

Hi Nellie,
Here is the form back to you. There were three main issues:
In order for dynamic behaviour, like showing and hiding, the form must be saved as a Dynamic XML Form in the save-as dialog.
While you can use a minus sign when naming objects and subforms, it will cause scripts to fail. I have changed the name of the subforms so that they now use an underscore.
The dropdown had specified values in the Object > Binding palette (1, 2, 3), so the script needs to use these in the if statements.
When sharing forms on Acrobat.com, the best option is to select the file in your workspace and then click Publish. This will make it available to anyone who has the published URL.
I hope that helps,
Niall

Only one angle visible and no audio audible in multicam clip

Two source media clips are ProRes and one is AVCHD. Creating the multiclip seems to work in so far as making a clip with 3 camera angles in it. But only one camera angle's picture is actually visible; the other two are black frames. No audio is heard at all. All 3 source media clips have audio and that's how I synched them. I can't see any audio waveforms in the multicam clip in the sequence. With the multicam button activated, I can make the yellow rectangle move around as though something were there, but no picture. In the multicam creation dialogue, I chose track 1 audio for synch and camera 1 to be my audio source. I am using the latest version of PP CC.
I saw a long thread from June/July 2013 discussing a similar problem, but that supposedly has been fixed. What is happening here? I exported a Final Cut Pro 7 project with 2-angle multi-clips in it, imported that XML file into Premiere and the multiclips worked fine. This is a different project, but I have no idea why this is not working. The answer is not in the instructions.

I do wish the PDF would include the original, manual method of multicam sequence creation, preferably as the first option, as that method still works just fine and often works better than the 'auto' methods now hyped.
For interested readers, here's the process:
1. Create a sequence.
2. Add your clips.
3. Sync them up.
4. Create a second sequence.
5. Nest the first sequence into the second.
6. Right click that nested sequence and select Multi-Camera>Enable.
A very simple process that works every time.

Dreamweaver Panels - Only one panel visible at a time, others get obscured even with Always On Top.

I have a problem with my Dreamweaver MX, and it is that I can only see one panel at a time, any other open panels get obscured. For example, with the work space maximized, and having the properties and behaviors panels open, I can only see one of the panels at the same time. If I click on any area of the work space each open panel will display and with the next click the other will display. If I make the work space smaller then the whole area of my screen, and move any open panels outside of the Dreamweaver work space, only then they will stay visible. I know this is not normal behavior, because I used to be able to see all the open panels simultaneously, with the work space maximized to use all the screen area. I went to Preferences> Panels> Always On Top, and all the checkmarks are still set, so as to keep all panels on top at all times, but this does no longer be the case. Can someone tell me what happened here, and how I can get back to being able to see all the open panels? BTW, I tried installing older version of Dreamweaver 4, and the same thing happens to both installed versions. This is extremely annoying!
Thanks. -Al.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

Weird viewing (one spread per pasteboard)

Okay I might just be losing it, but...
I'm looking at an old archived InDesign magazine issue. It's set up in spreads just like I'd expect. But I can't scroll through the spreads. When I click on a page in the pages dialog box, I can jump to it. But then the entire pasteboard is empty except for that one spread (where normally I could scroll up for the previous spread or down for the next spread). Is this some weird viewing preference? How do I get a normal view?
Thanks, Phyllis

"Are you saying there is no vertical scroll available at all? What happens when you zoom out to entire pasteboard?"
No matter how far out I zoom, I only see one spread. It's just then surrounded by a very large amount of white space, until I can see all the way to the edge of the pasteboard in all directions. It's as if the other pages don't exist until I double-click in the Pages panel and switch to one of them.
I'll try the INX option when I'm back at work again. I fear what would happen to this long document from switching orientations. I would guess this was done in an earlier version of InDesign (don't know which one as I only have CS3). Is there a way to tell which version it was created in? It's difficult going through someone else's files (especially older ones), but I occasionally have to go through archives.
Thanks, Phyllis

Only one Pedal off event remains visible in the score. Why?

In a score song I set Default Pedal Position to 0, so that all pedal events got hide. I don't know why... but only one pedal off event remains visible. It's an headache... I can't realize for which reason I can't hide that one ped off event..... Yet it has same channel, value and position of the others....
Any suggestion?

IOS: Wi-Fi or Bluetooth settings greyed out or dim.
http://support.apple.com/kb/TS1559

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears: "The licensing of the product does not work" Fault 6 How should I proceed? Have the program installed on only one computer.

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.

Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene

Error in view "IBO_WDC_INBOX.V_DEFAULT": Only one MessageArea UI Element is allowed to be visible

Dear Team,
In the control center, when i launch from SAP backend or select work overview button in the web UI it prompts for the error as below;
The following error occurred in system XYZ : Error in view "IBO_WDC_INBOX.V_DEFAULT": Only one MessageArea UI Element is allowed to be visible
Kindly suggest and advice.
All the ACF's are activated as mentioned.
Best Regards,
Shashikumar BS

What is your SAP version, including EHP and SP levels? See if SAP note 1818992 is relevant for your system and if it is make sure it is applied.

Only one of the movie clips visible

I have a few movie clips on stage. I want only one movie clip to be visible in each interval. Please assist.

same movieclip not selected twice in a row:
var mcA:Array=[A,B,C,D,E];
A._visible=false;
B._visible=false;
C._visible=false;
D._visible=false;
E._visible=false;
clearInterval(vizI);
vizI=setInterval(vizF,2000);
vizF();
function vizF(){
if(prevMC){
prevMC._visible=false;
while(prevMC==nextMC){
nextMC=mcA[Math.floor(Math.random()*mcA.length)];
nextMC._visible=true;
prevMC=nextMC;
//be sure to execute clearInterval(vizI) before navigating away from this frame

Ring tones visible, but only one selectable

I made some custom ringtones using the Ringtones app. These did not appear when selecting Sounds::Ringtone
or individual contacts, so I transferred them to itunes and then dropped them onto my iphone. (I tested them
on the mac: The icons say "RING" and are playable.) They appear in itunes under DEVICES::my iphone::Ringtones
(and of course in Ringtones app). So it looks like they are in the phone. ONE of them appears under Custom when
I select sounds, or ring tones for a contact.
Seems odd that they appear to be on the device, but only one shows up for selection.

Hi,
The number of left hand site is the total of all the instances in Active Directory. Including Directory, Access Control namespace and MFA.
Meanwhile, you could refer to this article about removing objects that were synchronized through the Azure Active Directory Sync tool
http://support.microsoft.com/kb/2619062
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I display AS3 Object in only one state?

I created a AS3 object from a SWFLoader class as an animation, which I then place in a Flex stage. I need to display the object programmatically in only one state but there is no "includeIn()" method to include it in just one state.
Right now, it is showing up on all of the flex states. I add this object at different times and positions in the state. Everything is fine except it displays in all the states.
How do I display a AS3 object in only one state?
Thank you.

When i use visible property as you suggested, it works, but only on one object. I am generating more than one of these objects, so there could be 3 or 4, etc of these objects displaying concurrently at different x y positions in the state.
Is there a way to grab all of the objects created by this AS3 class at once and apply the visible property?
thanx

IPhone Calendar List View Extends Back Only One Year

My iPhone calendar List view extends back approximately one year despite the fact that I have calendar entries extending back to 1999 and that older data is visible under the Day and Month views. This is a problem because the only search mechanism in iPhone calendar is through the List view. Therefore, any search I conduct extends back only to the data in the List view ... which means back only one year.
Does anyone have any thoughts or suggestions on how I could change this such that the List view extends to include ALL of my calendar entries and is in conformity with the Day and Month views? (I wanted to ask if anyone knows how to "correct" this, but perhaps Apple has designed it this way to speed-up the searching in List view ... I'm not certain.)
I am currently running the most recent iOS update, am syncing my iPhone calendar via MobileMe, have upgraded to the new version of the MobileMe calendar, and have ALREADY reset my sync. history, deleted my iPhone calendar and re-synced it, etc. These don't resolve the problem.

I've noticed that the date to which the List View will "look back" will change depending on software updates or syncs.
For instance, a few weeks ago my List View went back to December 2009 ... now it goes back to Jan. 2010 (i.e. I lost a month of "look back"). I do not specifically recall what triggered this change, but I reset my sync. log during this period.
If you make no changes to the sync. log or update the software, the List View start date will stay constant I believe. For instance, if the List View goes back to Jan. 1, 2010 right now it should stay that way until you reset the sync. log or update the iPhone software. Theoretically then the List View can "look back" much longer than 12 months assuming you make no changes to the sync. log or update the software. Of course, this doesn't address our issue here, but I thought I would point out that there seems to be a consistent pattern here and not some random bug screwing things up.
I'm still thinking that this is the way Apple intended it to work. In other words, that Apple felt it necessary to limit the calendar search feature to approximately 12 months worth of calendars. I hope I'm wrong.

How can I view just one spread at a time of my interactive PDF?

Hi,
Apologies of this has been asked before.
I am creating an interactive PDF of a magazine, to be viewed online.
I would like to be able to 'flip' through the spreads one spread at a time. I do not want to be able to scroll down.
I do not want to use SWF for various reasons (viewing on ipad etc)
When I open the magazine online it displays like this (one spread below the other) Is there a way for the spreads to be 'stacked' so I can only see one at any one time?
Thanks
Ben

Hi Ben,
You might want to create a pdf portfolio and check.
Regards,
Rave

Hide Top level navigation if user assigned only one role

Hi,
I would like to hide the top level navigation if user assigned with only one role.
I can create role based rule to show desktop using Master rule collection, but is it possible by doing to with role count.
If user has multiple roles show desktop1 else show desktop2

not sure if this possible ,you may check feasibility of creating a application which checks user role count and if role count is = 1 load the Portal url (URL alais) which had TLN iview invisible in the same window else do nothing and load the portal with the desktop which has tln.
Put the application in framewrk page which has TLN visible.
create a URL alias and create a desktop -framework page which dont have TLN ,assign this desktop to this URL alias in rule collection set its priority before user conditions check in rule collection so that it has high priority before user or group check in rule collection.
you can create a poc in sandbox and check if it wiorks?

Only one spread visible on pasteboard (CS4)

Similar Messages

Maybe you are looking for