Weird viewing (one spread per pasteboard)
Okay I might just be losing it, but...
I'm looking at an old archived InDesign magazine issue. It's set up in spreads just like I'd expect. But I can't scroll through the spreads. When I click on a page in the pages dialog box, I can jump to it. But then the entire pasteboard is empty except for that one spread (where normally I could scroll up for the previous spread or down for the next spread). Is this some weird viewing preference? How do I get a normal view?
Thanks, Phyllis
"Are you saying there is no vertical scroll available at all? What happens when you zoom out to entire pasteboard?"
No matter how far out I zoom, I only see one spread. It's just then surrounded by a very large amount of white space, until I can see all the way to the edge of the pasteboard in all directions. It's as if the other pages don't exist until I double-click in the Pages panel and switch to one of them.
I'll try the INX option when I'm back at work again. I fear what would happen to this long document from switching orientations. I would guess this was done in an earlier version of InDesign (don't know which one as I only have CS3). Is there a way to tell which version it was created in? It's difficult going through someone else's files (especially older ones), but I occasionally have to go through archives.
Thanks, Phyllis
Similar Messages
-
Only one spread visible on pasteboard (CS4)
Something weird happened to my indd file (a 128-page book) and although all the pages are all accounted for, only one spread is visible at a time: if I scroll up or down in the document window, there is nothing but blank space. I can access any other spread by double clicking in the Pages panel, and I can go forward or backward to the next spread using a keyboard shortcut I set up, but it is disturbing not to be able to scroll up or down to other spreads. I found a reference to this problem on another site (http://www.techplex.net/postst15582_weird-viewing-one-spread-per-pasteboard.html) where it was suggested that exporting as INX would fix the problem. I tried that and although opening an INX version did solve the scrolling problem, the text fell differently on the pages, so this was not a usable solution. Same thing for exporting as IDML. I don't know what accounts for the changes.
I'm hoping there's a simple way to get my scrolling back.You've obviously got some corruption in your file. That is illustrated by the fact you are getting this problem, and also by the fact an inx or idml export fixes it. I would recommend biting the bullet and doing it otherwise something else could go wrong and your whole file might become unusable.
The text falling on different pages will be because of text reflow, sounds like the file was created in an earlier version and updated to CS4? The text wouldn't reflow according to CS4's different composer until you edited it, or did a inx/idml conversion like this. -
my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair. -
How can I view just one spread at a time of my interactive PDF?
Hi,
Apologies of this has been asked before.
I am creating an interactive PDF of a magazine, to be viewed online.
I would like to be able to 'flip' through the spreads one spread at a time. I do not want to be able to scroll down.
I do not want to use SWF for various reasons (viewing on ipad etc)
When I open the magazine online it displays like this (one spread below the other) Is there a way for the spreads to be 'stacked' so I can only see one at any one time?
Thanks
BenHi Ben,
You might want to create a pdf portfolio and check.
Regards,
Rave -
How do I create one page per spread?
I want to create a digital booklet that is only one page per spread. Right now I have a spread with two pages, one is filled and the other is blank. How do I delete the blank page w/o moving the next page after the blank into its place? Your help is appreciated, thanks!
Just uncheck Facing Pages from New Document settings window while you create your document, or do it later from File > Document Setup.
You have to remove your empty pages manually after that. One easy way to do that is use Pages panel (Window>Pages), just activate thumbnails of empty pages by clicking them control button pushed down (in mac it´s command). After you have activated all your empty page thumbnails, just hit small carbage can icon at the bottom of pages panel...
Or use Layout > Pages > Delete Pages tool, where you can give page numbers of all the pages you want to delete. -
I search for apps about my hobby. There are over 1500 results. Each single result takes up the whole screen. I will have to swipe the screen 1500 times to see all the results. How can I see 8 or 10 results and scroll through fast? Thanks very much for any suggestions!
Bump:)
But I've found some online reviews of this and I think we
are stuck with this amazingly awful search system until
they realize people like me won't bother searching for or buying
Apps.
Does a novel display one sentence per page?
Do you listen to a radio documentary that transmits one word a minute?
Or how about a song that is broken into four parts because the singers ran out of breath?
Searching app products has never been easy or a pleasure, and now it's tougher than ever. Who has the time to swipe 1,600 times? It HURTS - and hurts my brain just thinking about it.
Woe is me!
Woe are we! -
Delivery from sales scheduling agreement with one item per schedule line
Hi all,
I have a sales scheduling agreement where the same part number has 3 different JIT schedule lines and I need to create a delivery with 3 item lines: every item line of the delivery has to be referred to one schedule line of the scheduling agreement.
When I create the delivery with transaction VL10E it has only one item line and its quantity is the sum of the 3 schedule lines of the sales scheduling agreement.
I've tried to change the customizing of the User Role, choosing the Split Schedule Line = 2 ("One item per schedule line") but the delivery is created again with only one item line.
How can I solve this issue?
Thanks in advance for replyDear Alex
The SAP standard behaviour is that all schedule items with delivery date in the past have to be rescheduled anyway to one date and are combined therefore.
Partially this behaviour can be influenced in VL10* by 2 parameters in
the user role : Split per sched.line and Rule (delivery qty).
Please find below informations about these different parameters
"Split per sched.line propose you 3 Rule for creating one delivery item
per schedule line. In a delivery list in item view with multiple
schedule lines, you can decide for the same document item whether you
want to generate one delivery item per schedule line or whether you want
to deliver the cumulated quantity of the last schedule lines selected.
About rule for delivery quantity, the following rules are currently
implemented:
1. No cumulation
The open schedule line quantity to be delivered is the quantity at which
the list line is delivered.
2. Sum of all open schedule line quantities to be delivered that fall
before the chronologically latest date in the to field (following the
Deliv. creation date field) of the selection criteria.
3. Sum of all open schedule line quantities to be delivered whose
delivery creation date falls within the selection time frame (between
the dates in the Deliv. creation date and to fields, respectively),
making the calculation of the quantity to be delivered consistent with
selection criteria. However, calculationof the quantities delivered with
the order's schedule line quantities is not affected."
Hope this helps.
Regards
Tonia -
Question: Viewing one page at a time
How do I change from viewing a spread as two pages to just viewing one page at a time?
If the doc is set up with spreads then turning spreads off may change the structure of a document. Or, at least, it did back in CS4 when I turned spreads off to look at a document in single-page layout because I was working on a laptop. When I turned spreads back on, lots of features (like anchored objects or text wraps set up to align to spine or "outside edge" for example) were broken.
I never researched any further - I simply got in the habit of exporting PDFs and viewing those in single-page mode, instead of trying to affect layout in InDesign. Maybe this isn't broken anymore, or perhaps there's a non-destructive method of getting a single-page view. Or, more importantly, maybe the document you're looking at doesn't have any of these spread-dependent features. Or maybe you dont need it to keep the spreads features. Anyway, be aware that you might lose something if you untick that box. -
Actual and Plan Versions annual view - Multiple versions per company code
Good Day,
Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
Kind RegardsRemove restriction on comp code. There could be 2 models.
1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube. -
Can see only one photo per page. How to revert to multiple images per page?
First noticed on my iMac and now on my Macbook (10.4.9)--I'm no longer seeing a month's worth of photos on a single page. Only one photo per page, sometimes with miniature ones in the top border. I thought it was simply an inadvertent click on by part and easily corrected. But all attempts on both computers and reading of Help index haven't led to restoration of an entire page of photos and elimination of the annoyance. I'm wondering now if something I downloaded might have altered iPhoto program itself, making it impossible to view large numbers of photos at the same time. Any suggestions appreciated.
CapCap,
This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
Regards. -
Is it possible to datamerge more than one image per page?
I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Add image fields in the data source file
By adding image fields to the data source file, you can allow a different image to appear on each merged record. For example, when you merge documents that include information from various companies, you may want to include an image of each company’s logo as part of the merge.
Open the data source file.
At the beginning of the data field name, type an “at” symbol (@) to insert text or paths that refer to image files.The @ symbol is required only in the first line; subsequent lines should include the image paths. Paths, which are case-sensitive, must follow the naming conventions of the operating system in which they’re stored.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.
(Windows) Example of image references in data source file
Bill Tucker
36
C:\Photos\BillTucker.jpg
Dat Nguyen
53
C:\MyDocuments\dat.gif
Maria Ruiz
26
C:\Photos\Ruiz.psd
(Mac OS) Example of image references in data source file
Bill Tucker
36
Mac HD:Photos:BillTucker.jpg
Dat Nguyen
53
Desktop:Family:dat.gif
Maria Ruiz
26
Mac HD:Photos:Ruiz.psd
You can use InDesign to view the path of an image on your operating system. Insert an image in an InDesign document, and then use the Links panel to view the image’s location. With the image selected, choose Copy Info > Copy Full Path from the Links panel menu. You may need to edit the path after you paste it in your data source. This technique is especially useful for images on a server.anna-rees wrote:
I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Yes, pretty much exactly as you describe. You would then just add those fields to the boxes in your page. I tend to add an apostrophe before the @ symbol in Excel so it doesn't think it's a function - as per text you quoted above.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions. -
How to improve speed of queries that use ORM one table per concrete class
Hi,
Many tools that make ORM (Object Relational Mapping) like Castor, Hibernate, Toplink, JPOX, etc.., have the one table per concrete class feature that maps objects to follow structure:
CREATE TABLE ABSTRACTPRODUCT (
ID VARCHAR(8) NOT NULL,
DESCRIPTION VARCHAR(60) NOT NULL,
PRIMARY KEY(ID)
CREATE TABLE PRODUCT (
ID VARCHAR(8) NOT NULL REFERENCES ABSTRACTPRODUCT(ID),
CODE VARCHAR(10) NOT NULL,
PRICE DECIMAL(12,2),
PRIMARY KEY(ID)
CREATE UNIQUE INDEX iProduct ON Product(code)
CREATE TABLE BOOK (
ID VARCHAR(8) NOT NULL REFERENCES PRODUCT(ID),
AUTHOR VARCHAR(60) NOT NULL,
PRIMARY KEY (ID)
CREATE TABLE COMPACTDISK (
ID VARCHAR(8) NOT NULL REFERENCES PRODUCT(ID),
ARTIST VARCHAR(60) NOT NULL,
PRIMARY KEY(ID)
there is a way to improve queries like
SELECT
pd.code CODE,
abpd.description DESCRIPTION,
DECODE(bk.id,NULL,cd.artist,bk.author) PERSON
FROM
ABSTRACTPRODUCT abpd,
PRODUCT pd,
BOOK bk,
COMPACTDISK cd
WHERE
pd.id = abpd.id AND
bk.id(+) = abpd.id AND
cd.id(+) = abpd.id AND
pd.code like '101%'
or like this:
SELECT
pd.code CODE,
abpd.description DESCRIPTION,
DECODE(bk.id,NULL,cd.artist,bk.author) PERSON
FROM
ABSTRACTPRODUCT abpd,
PRODUCT pd,
BOOK bk,
COMPACTDISK cd
WHERE
pd.id = abpd.id AND
bk.id(+) = abpd.id AND
cd.id(+) = abpd.id AND
abpd.description like '%STARS%' AND
pd.price BETWEEN 1 AND 10
think in a table with many rows, then exists something inside MaxDB to improve this type of queries? like some anotations on SQL? or declare tables that extends another by PK? on other databases i managed this using Materialized Views, but i think that this can be faster just using PK, i'm wrong? the better is to consolidate all tables in one table? what is the impact on database size with this consolidation?
note: with consolidation i will miss NOT NULL constraint at database side.
thanks for any insight.
ClóvisHi Lars,
i dont understand because the optimizer get that Index for TM at execution plan, and because dont use the join via KEY column, note the WHERE clause is "TM.OID = MF.MY_TIPO_MOVIMENTO" by the key column, and the optimizer uses an INDEX that the indexed column is ID_SYS, that isnt and cant be a primary key, because its not UNIQUE, follow the index columns:
indexes of TipoMovimento
INDEXNAME COLUMNNAME SORT COLUMNNO DATATYPE LEN INDEX_USED FILESTATE DISABLED
ITIPOMOVIMENTO TIPO ASC 1 VARCHAR 2 220546 OK NO
ITIPOMOVIMENTO ID_SYS ASC 2 CHAR 6 220546 OK NO
ITIPOMOVIMENTO MY_CONTA_DEBITO ASC 3 CHAR 8 220546 OK NO
ITIPOMOVIMENTO MY_CONTA_CREDITO ASC 4 CHAR 8 220546 OK NO
ITIPOMOVIMENTO1 ID_SYS ASC 1 CHAR 6 567358 OK NO
ITIPOMOVIMENTO2 DESCRICAO ASC 1 VARCHAR 60 94692 OK NO
after i create the index iTituloCobrancaX7 on TituloCobranca(OID,DATA_VENCIMENTO) in a backup instance and get surprised with the follow explain:
OWNER TABLENAME COLUMN_OR_INDEX STRATEGY PAGECOUNT
TC ITITULOCOBRANCA1 RANGE CONDITION FOR INDEX 5368
DATA_VENCIMENTO (USED INDEX COLUMN)
MF OID JOIN VIA KEY COLUMN 9427
TM OID JOIN VIA KEY COLUMN 22
TABLE HASHED
PS OID JOIN VIA KEY COLUMN 1350
BOL OID JOIN VIA KEY COLUMN 497
NO TEMPORARY RESULTS CREATED
JDBC_CURSOR_19 RESULT IS COPIED , COSTVALUE IS 988
note that now the optimizer gets the index ITITULOCOBRANCA1 as i expected, if i drop the new index iTituloCobrancaX7 the optimizer still getting this execution plan, with this the query executes at 110 ms, with that great news i do same thing in the production system, but the execution plan dont changes, and i still getting a long execution time this time at 413516 ms. maybe the problem is how optimizer measure my tables.
i checked in DBAnalyser that the problem is catalog cache hit rate (we discussed this at [catalog cache hit rate, how to increase?|;
) and the low selectivity of this SQL command, then its because of this that to achieve a better selectivity i must have an index with, MF.MY_SACADO, MF.TIPO and TC.DATA_VENCIMENTO, as explained in previous posts, since this type of index inside MaxDB isnt possible, i have no choice to speed this type of query without changing tables structure.
MaxDB developers can develop this type of index? or a feature like this dont have any plans to be made?
if no, i must create another schema, to consolidate tables to speed queries on my system, but with this consolidation i will get more overhead, i must solve the less selectivity because i think if the data on tables increase, the query becomes impossible, i see that CREATE INDEX supports FUNCTION, maybe a FUNCTION that join data of two tables can solve this?
about instance configuration it is:
Machine:
Version: '64BIT Kernel'
Version: 'X64/LIX86 7.6.03 Build 007-123-157-515'
Version: 'FAST'
Machine: 'x86_64'
Processors: 2 ( logical: 8, cores: 8 )
data volumes:
ID MODE CONFIGUREDSIZE USABLESIZE USEDSIZE USEDSIZEPERCENTAGE DROPVOLUME TOTALCLUSTERAREASIZE RESERVEDCLUSTERAREASIZE USEDCLUSTERAREASIZE PATH
1 NORMAL 4194304 4194288 379464 9 NO 0 0 0 /db/SPDT/data/data01.dat
2 NORMAL 4194304 4194288 380432 9 NO 0 0 0 /db/SPDT/data/data02.dat
3 NORMAL 4194304 4194288 379184 9 NO 0 0 0 /db/SPDT/data/data03.dat
4 NORMAL 4194304 4194288 379624 9 NO 0 0 0 /db/SPDT/data/data04.dat
5 NORMAL 4194304 4194288 380024 9 NO 0 0 0 /db/SPDT/data/data05.dat
log volumes:
ID CONFIGUREDSIZE USABLESIZE PATH MIRRORPATH
1 51200 51176 /db/SPDT/log/log01.dat ?
parameters:
KERNELVERSION KERNEL 7.6.03 BUILD 007-123-157-515
INSTANCE_TYPE OLTP
MCOD NO
_SERVERDB_FOR_SAP YES
_UNICODE NO
DEFAULT_CODE ASCII
DATE_TIME_FORMAT ISO
CONTROLUSERID DBM
CONTROLPASSWORD
MAXLOGVOLUMES 2
MAXDATAVOLUMES 11
LOG_VOLUME_NAME_001 /db/SPDT/log/log01.dat
LOG_VOLUME_TYPE_001 F
LOG_VOLUME_SIZE_001 6400
DATA_VOLUME_NAME_0005 /db/SPDT/data/data05.dat
DATA_VOLUME_NAME_0004 /db/SPDT/data/data04.dat
DATA_VOLUME_NAME_0003 /db/SPDT/data/data03.dat
DATA_VOLUME_NAME_0002 /db/SPDT/data/data02.dat
DATA_VOLUME_NAME_0001 /db/SPDT/data/data01.dat
DATA_VOLUME_TYPE_0005 F
DATA_VOLUME_TYPE_0004 F
DATA_VOLUME_TYPE_0003 F
DATA_VOLUME_TYPE_0002 F
DATA_VOLUME_TYPE_0001 F
DATA_VOLUME_SIZE_0005 524288
DATA_VOLUME_SIZE_0004 524288
DATA_VOLUME_SIZE_0003 524288
DATA_VOLUME_SIZE_0002 524288
DATA_VOLUME_SIZE_0001 524288
DATA_VOLUME_MODE_0005 NORMAL
DATA_VOLUME_MODE_0004 NORMAL
DATA_VOLUME_MODE_0003 NORMAL
DATA_VOLUME_MODE_0002 NORMAL
DATA_VOLUME_MODE_0001 NORMAL
DATA_VOLUME_GROUPS 1
LOG_BACKUP_TO_PIPE NO
MAXBACKUPDEVS 2
LOG_MIRRORED NO
MAXVOLUMES 14
LOG_IO_BLOCK_COUNT 8
DATA_IO_BLOCK_COUNT 64
BACKUP_BLOCK_CNT 64
_DELAY_LOGWRITER 0
LOG_IO_QUEUE 50
_RESTART_TIME 600
MAXCPU 8
MAX_LOG_QUEUE_COUNT 0
USED_MAX_LOG_QUEUE_COUNT 8
LOG_QUEUE_COUNT 1
MAXUSERTASKS 500
_TRANS_RGNS 8
_TAB_RGNS 8
_OMS_REGIONS 0
_OMS_RGNS 7
OMS_HEAP_LIMIT 0
OMS_HEAP_COUNT 8
OMS_HEAP_BLOCKSIZE 10000
OMS_HEAP_THRESHOLD 100
OMS_VERS_THRESHOLD 2097152
HEAP_CHECK_LEVEL 0
_ROW_RGNS 8
RESERVEDSERVERTASKS 16
MINSERVERTASKS 28
MAXSERVERTASKS 28
_MAXGARBAGE_COLL 1
_MAXTRANS 4008
MAXLOCKS 120080
_LOCK_SUPPLY_BLOCK 100
DEADLOCK_DETECTION 4
SESSION_TIMEOUT 180
OMS_STREAM_TIMEOUT 30
REQUEST_TIMEOUT 5000
_IOPROCS_PER_DEV 2
_IOPROCS_FOR_PRIO 0
_IOPROCS_FOR_READER 0
_USE_IOPROCS_ONLY NO
_IOPROCS_SWITCH 2
LRU_FOR_SCAN NO
_PAGE_SIZE 8192
_PACKET_SIZE 131072
_MINREPLY_SIZE 4096
_MBLOCK_DATA_SIZE 32768
_MBLOCK_QUAL_SIZE 32768
_MBLOCK_STACK_SIZE 32768
_MBLOCK_STRAT_SIZE 16384
_WORKSTACK_SIZE 8192
_WORKDATA_SIZE 8192
_CAT_CACHE_MINSIZE 262144
CAT_CACHE_SUPPLY 131072
INIT_ALLOCATORSIZE 262144
ALLOW_MULTIPLE_SERVERTASK_UKTS NO
_TASKCLUSTER_01 tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
_TASKCLUSTER_02 ti,100*dw;63*us;
_TASKCLUSTER_03 equalize
_DYN_TASK_STACK NO
_MP_RGN_QUEUE YES
_MP_RGN_DIRTY_READ DEFAULT
_MP_RGN_BUSY_WAIT DEFAULT
_MP_DISP_LOOPS 2
_MP_DISP_PRIO DEFAULT
MP_RGN_LOOP -1
_MP_RGN_PRIO DEFAULT
MAXRGN_REQUEST -1
_PRIO_BASE_U2U 100
_PRIO_BASE_IOC 80
_PRIO_BASE_RAV 80
_PRIO_BASE_REX 40
_PRIO_BASE_COM 10
_PRIO_FACTOR 80
_DELAY_COMMIT NO
_MAXTASK_STACK 512
MAX_SERVERTASK_STACK 500
MAX_SPECIALTASK_STACK 500
_DW_IO_AREA_SIZE 50
_DW_IO_AREA_FLUSH 50
FBM_VOLUME_COMPRESSION 50
FBM_VOLUME_BALANCE 10
_FBM_LOW_IO_RATE 10
CACHE_SIZE 262144
_DW_LRU_TAIL_FLUSH 25
XP_DATA_CACHE_RGNS 0
_DATA_CACHE_RGNS 64
XP_CONVERTER_REGIONS 0
CONVERTER_REGIONS 8
XP_MAXPAGER 0
MAXPAGER 64
SEQUENCE_CACHE 1
_IDXFILE_LIST_SIZE 2048
VOLUMENO_BIT_COUNT 8
OPTIM_MAX_MERGE 500
OPTIM_INV_ONLY YES
OPTIM_CACHE NO
OPTIM_JOIN_FETCH 0
JOIN_SEARCH_LEVEL 0
JOIN_MAXTAB_LEVEL4 16
JOIN_MAXTAB_LEVEL9 5
_READAHEAD_BLOBS 32
CLUSTER_WRITE_THRESHOLD 80
CLUSTERED_LOBS NO
RUNDIRECTORY /var/opt/sdb/data/wrk/SPDT
OPMSG1 /dev/console
OPMSG2 /dev/null
_KERNELDIAGFILE knldiag
KERNELDIAGSIZE 800
_EVENTFILE knldiag.evt
_EVENTSIZE 0
_MAXEVENTTASKS 2
_MAXEVENTS 100
_KERNELTRACEFILE knltrace
TRACE_PAGES_TI 2
TRACE_PAGES_GC 20
TRACE_PAGES_LW 5
TRACE_PAGES_PG 3
TRACE_PAGES_US 10
TRACE_PAGES_UT 5
TRACE_PAGES_SV 5
TRACE_PAGES_EV 2
TRACE_PAGES_BUP 0
KERNELTRACESIZE 5369
EXTERNAL_DUMP_REQUEST NO
_AK_DUMP_ALLOWED YES
_KERNELDUMPFILE knldump
_RTEDUMPFILE rtedump
_UTILITY_PROTFILE dbm.utl
UTILITY_PROTSIZE 100
_BACKUP_HISTFILE dbm.knl
_BACKUP_MED_DEF dbm.mdf
_MAX_MESSAGE_FILES 0
_SHMKERNEL 44601
__PARAM_CHANGED___ 0
__PARAM_VERIFIED__ 2008-05-03 23:12:55
DIAG_HISTORY_NUM 2
DIAG_HISTORY_PATH /var/opt/sdb/data/wrk/SPDT/DIAGHISTORY
_DIAG_SEM 1
SHOW_MAX_STACK_USE NO
SHOW_MAX_KB_STACK_USE NO
LOG_SEGMENT_SIZE 2133
_COMMENT
SUPPRESS_CORE YES
FORMATTING_MODE PARALLEL
FORMAT_DATAVOLUME YES
OFFICIAL_NODE
UKT_CPU_RELATIONSHIP NONE
HIRES_TIMER_TYPE CPU
LOAD_BALANCING_CHK 30
LOAD_BALANCING_DIF 10
LOAD_BALANCING_EQ 5
HS_STORAGE_DLL libhsscopy
HS_SYNC_INTERVAL 50
USE_OPEN_DIRECT YES
USE_OPEN_DIRECT_FOR_BACKUP NO
SYMBOL_DEMANGLING NO
EXPAND_COM_TRACE NO
JOIN_TABLEBUFFER 128
SET_VOLUME_LOCK YES
SHAREDSQL YES
SHAREDSQL_CLEANUPTHRESHOLD 25
SHAREDSQL_COMMANDCACHESIZE 262144
MEMORY_ALLOCATION_LIMIT 0
USE_SYSTEM_PAGE_CACHE YES
USE_COROUTINES YES
FORBID_LOAD_BALANCING YES
MIN_RETENTION_TIME 60
MAX_RETENTION_TIME 480
MAX_SINGLE_HASHTABLE_SIZE 512
MAX_HASHTABLE_MEMORY 5120
ENABLE_CHECK_INSTANCE YES
RTE_TEST_REGIONS 0
HASHED_RESULTSET YES
HASHED_RESULTSET_CACHESIZE 262144
CHECK_HASHED_RESULTSET 0
AUTO_RECREATE_BAD_INDEXES NO
AUTHENTICATION_ALLOW
AUTHENTICATION_DENY
TRACE_AK NO
TRACE_DEFAULT NO
TRACE_DELETE NO
TRACE_INDEX NO
TRACE_INSERT NO
TRACE_LOCK NO
TRACE_LONG NO
TRACE_OBJECT NO
TRACE_OBJECT_ADD NO
TRACE_OBJECT_ALTER NO
TRACE_OBJECT_FREE NO
TRACE_OBJECT_GET NO
TRACE_OPTIMIZE NO
TRACE_ORDER NO
TRACE_ORDER_STANDARD NO
TRACE_PAGES NO
TRACE_PRIMARY_TREE NO
TRACE_SELECT NO
TRACE_TIME NO
TRACE_UPDATE NO
TRACE_STOP_ERRORCODE 0
TRACE_ALLOCATOR 0
TRACE_CATALOG 0
TRACE_CLIENTKERNELCOM 0
TRACE_COMMON 0
TRACE_COMMUNICATION 0
TRACE_CONVERTER 0
TRACE_DATACHAIN 0
TRACE_DATACACHE 0
TRACE_DATAPAM 0
TRACE_DATATREE 0
TRACE_DATAINDEX 0
TRACE_DBPROC 0
TRACE_FBM 0
TRACE_FILEDIR 0
TRACE_FRAMECTRL 0
TRACE_IOMAN 0
TRACE_IPC 0
TRACE_JOIN 0
TRACE_KSQL 0
TRACE_LOGACTION 0
TRACE_LOGHISTORY 0
TRACE_LOGPAGE 0
TRACE_LOGTRANS 0
TRACE_LOGVOLUME 0
TRACE_MEMORY 0
TRACE_MESSAGES 0
TRACE_OBJECTCONTAINER 0
TRACE_OMS_CONTAINERDIR 0
TRACE_OMS_CONTEXT 0
TRACE_OMS_ERROR 0
TRACE_OMS_FLUSHCACHE 0
TRACE_OMS_INTERFACE 0
TRACE_OMS_KEY 0
TRACE_OMS_KEYRANGE 0
TRACE_OMS_LOCK 0
TRACE_OMS_MEMORY 0
TRACE_OMS_NEWOBJ 0
TRACE_OMS_SESSION 0
TRACE_OMS_STREAM 0
TRACE_OMS_VAROBJECT 0
TRACE_OMS_VERSION 0
TRACE_PAGER 0
TRACE_RUNTIME 0
TRACE_SHAREDSQL 0
TRACE_SQLMANAGER 0
TRACE_SRVTASKS 0
TRACE_SYNCHRONISATION 0
TRACE_SYSVIEW 0
TRACE_TABLE 0
TRACE_VOLUME 0
CHECK_BACKUP NO
CHECK_DATACACHE NO
CHECK_KB_REGIONS NO
CHECK_LOCK NO
CHECK_LOCK_SUPPLY NO
CHECK_REGIONS NO
CHECK_TASK_SPECIFIC_CATALOGCACHE NO
CHECK_TRANSLIST NO
CHECK_TREE NO
CHECK_TREE_LOCKS NO
CHECK_COMMON 0
CHECK_CONVERTER 0
CHECK_DATAPAGELOG 0
CHECK_DATAINDEX 0
CHECK_FBM 0
CHECK_IOMAN 0
CHECK_LOGHISTORY 0
CHECK_LOGPAGE 0
CHECK_LOGTRANS 0
CHECK_LOGVOLUME 0
CHECK_SRVTASKS 0
OPTIMIZE_AGGREGATION YES
OPTIMIZE_FETCH_REVERSE YES
OPTIMIZE_STAR_JOIN YES
OPTIMIZE_JOIN_ONEPHASE YES
OPTIMIZE_JOIN_OUTER YES
OPTIMIZE_MIN_MAX YES
OPTIMIZE_FIRST_ROWS YES
OPTIMIZE_OPERATOR_JOIN YES
OPTIMIZE_JOIN_HASHTABLE YES
OPTIMIZE_JOIN_HASH_MINIMAL_RATIO 1
OPTIMIZE_OPERATOR_JOIN_COSTFUNC YES
OPTIMIZE_JOIN_PARALLEL_MINSIZE 1000000
OPTIMIZE_JOIN_PARALLEL_SERVERS 0
OPTIMIZE_JOIN_OPERATOR_SORT YES
OPTIMIZE_QUAL_ON_INDEX YES
DDLTRIGGER YES
SUBTREE_LOCKS NO
MONITOR_READ 2147483647
MONITOR_TIME 2147483647
MONITOR_SELECTIVITY 0
MONITOR_ROWNO 0
CALLSTACKLEVEL 0
OMS_RUN_IN_UDE_SERVER NO
OPTIMIZE_QUERYREWRITE OPERATOR
TRACE_QUERYREWRITE 0
CHECK_QUERYREWRITE 0
PROTECT_DATACACHE_MEMORY NO
LOCAL_REDO_LOG_BUFFER_SIZE 0
FILEDIR_SPINLOCKPOOL_SIZE 10
TRANS_HISTORY_SIZE 0
TRANS_THRESHOLD_VALUE 60
ENABLE_SYSTEM_TRIGGERS YES
DBFILLINGABOVELIMIT 70L80M85M90H95H96H97H98H99H
DBFILLINGBELOWLIMIT 70L80L85L90L95L
LOGABOVELIMIT 50L75L90M95M96H97H98H99H
AUTOSAVE 1
BACKUPRESULT 1
CHECKDATA 1
EVENT 1
ADMIN 1
ONLINE 1
UPDSTATWANTED 1
OUTOFSESSIONS 3
ERROR 3
SYSTEMERROR 3
DATABASEFULL 1
LOGFULL 1
LOGSEGMENTFULL 1
STANDBY 1
USESELECTFETCH YES
USEVARIABLEINPUT NO
UPDATESTAT_PARALLEL_SERVERS 0
UPDATESTAT_SAMPLE_ALGO 1
SIMULATE_VECTORIO IF_OPEN_DIRECT_OR_RAW_DEVICE
COLUMNCOMPRESSION YES
TIME_MEASUREMENT NO
CHECK_TABLE_WIDTH NO
MAX_MESSAGE_LIST_LENGTH 100
SYMBOL_RESOLUTION YES
PREALLOCATE_IOWORKER NO
CACHE_IN_SHARED_MEMORY NO
INDEX_LEAF_CACHING 2
NO_SYNC_TO_DISK_WANTED NO
SPINLOCK_LOOP_COUNT 30000
SPINLOCK_BACKOFF_BASE 1
SPINLOCK_BACKOFF_FACTOR 2
SPINLOCK_BACKOFF_MAXIMUM 64
ROW_LOCKS_PER_TRANSACTION 50
USEUNICODECOLUMNCOMPRESSION NO
about send you the data from tables, i dont have permission to do that, since all data is in a production system, the customer dont give me the rights to send any information. sorry about that.
best regards
Clóvis -
Amazon print guidelines specify one page per sheet
Amazon print guidelines specify one page per sheet
I am setting up a new book and not sure I understand Amazon guidlines "one page per sheet".
I am pretty sure this setup is one page per sheet when Exported to PDF -- can any one please confirm this?Thanks, you mean be sure "Spreads" is unchecked as in this screenshot (I don't know what I am doing here)...?
-
How do you get table column names to show one time per page
I have a report where I want the column names to show one time per page.
I have the table with the column names set below the header and above the
'for-each Row'.
When I view the report in PDF format the colunm names show only one time on the first page and on the other pages the column names do not show at all. If I view the report in RTF, the same thing happens, shows column names on the first page, but not on the other pages after that.
I highlighted the table and went to table properties, clicked on ROW tab and then checked (Repeat as header row at the top of each page) and it still does not work for PDF or RTF format. I have looked at other forums with this issue and it doesn't work for me in PDF format.
Could someone tell me what I am doing wrong.....
I appreciate anyone that can help me.
Thank you,
SusieI figured out what I was doing wrong.
I was creating a seperate table for the column names and not using the table where the column names where created originally. I deleted the column names from the original table and created a seperate table above that table with the column names only.
So I went back to the original table and highlighted the row with the column names and went to table properties/ROW tab/ and clicked (Repeat as header row at the top of each page) and now it works perfectly in PDF format where the column names show one time for each page. Deleted the other table where I had the column names only.
thanks
Susie -
What if i need more than one prepareStatements per connection
hi all!!
Please take some time to look into this scenario.
On the front end: User enters/ updates his/her records and submits. An ArrayList of object goes to backend.
On back end: i have to loop for the size of the ArrayList submitted and see if some record is to be updated or inserted.
Now at back end i do following steps:
I have only one Connection object named connection.
Step 1:
query (say query1 )to see if the record in DB exists for the primary key as extracted from the element from ArrayList. So one prepareStatment ( say prepareStatement1) for this. I write a query and execute :
prepareStatment1= connection.prepareStatement(query1);
Step2 :
A query ( say query2) to update Data in DB. And i have a separtae prepareStatement for this and i execute
prepareStatment2 = connection.prepareStatement(query2);
Sep3
A query (say query3 )to insert Data in DB. And i have a separtae prepareStatement for this and i execute
prepareStatment3 = connection.prepareStatement(query3);
Step4:
for: size of arraylist:
1. take out the element at ith index from the list.
2. see if the record exists i.e execute step1 and see if resultSet.next() is true.
3. if record exists step2 applies so execute update query
4. if record doesnot exist then go to step3 and execute insert query
A weird thing happened .. insert was running fine but update was not. May be i was not checking appropriately. BUT the error that occurrd was that
[Microsoft][ODBC SQL Server Driver]Connection is busy with
results for another hstmt.
So i changed my path and in loop i prepareStatement and execute query to see if record exists or not and store the result in some boolean variable and then close this prepareStatement. and if the result existed again prepare a statement for update or else prepare a statement for insert and execute the respective.
and then again close this prepareStatement and go for next iteration of loop
so each iteration i am preparing statement and then closing it BECAUSE Connection doesnot allow more than one statement per connection at one time. Am i right.??
what should i do.? Although i have solved problem by closing and preparing in loop but that is so inefficient. Is there some elegant way???
please reply.
PS: I am using ms sql server 8.0 as my DBMS. I am developing web application using Sun Creator.No, you can use as many PreparedStatements as you like, all from one Connection, and you can keep them open as long as you like. (I do this with no problems.) Where you will run into problems is when you are trying to use two ResultSets at the same time. That's what the error message means, it just doesn't use JDBC terminology.
Maybe you are looking for
-
T61 - Half theCore speed at maximum performanc​e mode.
Hello, My T61 was bought during March 2008. I recently installed CPU-Z and was bit worried since under maximum performance mode, the CPU was not throttling to full speed (with AC power). The core speed is showing approximately 1200MHz. FSB is showing
-
Is it worth it to get a macbook pro or macbook + ipad 2
i am in high school and going into 10th grade next year. I have done quite a bit of research and think i have narrowed down my options based on my needs and how much money i have. I am in need of a new computer since my laptop will not make it much l
-
Error Deploying to IntegratedWebLogicServer
Hello, While deploying a JSF application into IntegratedWebLogicServer, I'm getting the following message. I'm using Jdeveloper Studio Edition Version 11.1.1.3.0 build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660. Can you suggest me what I could be
-
My husbands computer crashed and we don't have a backup of our ITunes. How can we access and download all previous ITunes purchases?
-
I was going to ask a question but just read the Ipod touch help forum
I WAS going to ask about IOS on the Ipod touch with the intention of purchasing one for my grandson and syncing it to my imac After reading this lot he can have summat else instead Thank you You have probably saved my Imac, my sanity and my marriage