Only two categories visible in purchased.

Hi everybody,
I have two movies, plenty of apps, and one book purchased. I set up a family sharing with my mother's macbook air and she bought a movie (on my credit card). She already watched it, but I don't see it in my library. Just like she don't see any movie or book I bought. I read (in other topics) that to view family member purchased items I have to open the Purchased menu in the iTunes app, however I see there only two categories Music and Apps. (I never bought any music) Why my movies aren't visible? Can you please help me?

Hi,
Thank's for your answers.
A NVRAM reset (Commande (⌘), Option, P et R) solve this issue.
Best Regards,
Agrum35

Similar Messages

  • P67A-GD65 - 4x sysfans, but only 2 are visible in BIOS

    Hello everybody,
    I'm new to this forum and to this motherboard.
    I noticed that this motherboard has 4 SYSFAN conenctors, but only two are visible in BIOS or Control Center.
    I don't know what's the speed nor I can't adjust it..
    Is this normal or am I missing something?
    Regards.

    Quote
    1V x 1A = 1W ? Is it really that simple?
    Yes. P = V x I  ---> http://en.wikipedia.org/wiki/Electric_power#Direct_current
    Quote
    In direct current resistive circuits, electrical power is calculated using Joule's law:
        P = V I
    where P is the electric power, V the potential difference, and I the electric current.
    Quote
    So in theory i can connect up to 5 fans? Is this correct?
    Yes.  Different fans, however will have different current ratings.  There are fans out there which only draw about 0.1-0.12A.  So, with such fans, you could theoretically install 8-10 (even though that would probably be pointless).
    Quote
    Jack, what do you mean by "the whole fan circuit"? All as in ALL? CPU and all the sysfan connectors?
    Yes, all in all, CPU Fan + SysFan.  At least as far as I am informed.

  • Four pages of apps in iTunes, but only first two pages visible on iPhone!

    If I connect my iPhone 4 to my notebook and launch iTunes, I can see four pages of apps on my phone - two pages, then a blank page, then a further two pages.
    However, looking at the phone itself, only the first two pages are visible (and only two little dots at the bottom of the home page).
    I can shuffle the apps around in iTunes without any difficulty, but when I press 'apply' the sync ends with everything back as it was in the first place.
    iOS and iTunes both up-to-date, rebooting and soft reset doesn't fix.
    Hope someone can help!
    Thanks

    We are having the same problem. Any updates?

  • I purchased three albums last week and only two of them were charged.   How can I make sure that the third album gets charged in a timely fashion?

    I purchased three albums last week and only two of them were charged.   How can I make sure that the third album gets charged in a timely fashion?

    Well, thanks for feeling with me, patkosanke ... AND for your wise advice.
    I did followed your advice immediately and erased all the service number as well as S/Ns.
    Can you, however, give me any "direct number" through which I can get hold of someone and request for what you're suggesting?
    I believe I had talked with the person by the name of "Charlie" (I think... I hope I'm correct...) when I was having the same problem with the last device. He was very kind and helpful, though I ended up getting the device that brought the same problem.
    Charlie told me that if I had any more problems I should call him. But I forgot to take down his direct number.
    Or maybe I should call the main office and ask for him. But my memory is questionable as to his name, and besides I don't even know his last name either. There could be more than one "Charlies" in Palm.
    So, if you could somehow email me some direct number (other than the one that keeps on hooking me up with those people in the overseas who are answering the phone only to sympathize with & apologize to me but can only issue a false hope with the SRO#. More than once I was given the promise that the supervisor would call me back within an hour or two but I ended up calling back after I had been left hanging in the air all night long.) where I can talk to someone like I did with Charlie last time who can truly carry out the promise, I would truly appreciate it, patkosanke. ^^
    Thanks
    jcinlovewpalmTX
    Post relates to: Palm TX
    Post relates to: Palm TX
    Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM
    Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM

  • IDOC for custom confirmation categories in a purchase order

    Hi Gurus,
    I am stuck with a problem in incoming IDOCS. We are creating new confirmation categories, other than AA, AB and LA.
    I need two of them, Z1 and Z2 (custom confirmation type/category) to come via EDI
    However SAP says that only conf categories associated with internal conf categories (order acknowledgment, shipping notification, rough goods receipt) can come via EDI.
    Creating internal conf categories does not seem to be allowed in SAP.
    Is there some specific IDOC type that can be used to bring in z1,z2?
    we are already using DESADV for LA and SHPMNT for shipment.
    I am trying SHPCON for this purpose, but i dont see any field for conf type (EBTYP). Then i looked into ORDRSP
    Any help will be appreciated
    Thanks
    Nitin

    Hi,
    SAP has provided two reports that you can use for capturing all changes you have made to your POs -
    1)   RSSCD100; and
    2)   CHANGEDOCU_READ
    Both reports shall be run with Object Class EINKBELEG.
    Cheers,
    HT

  • I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

    I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

    You will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to your computer (that will copy PDFs and epubs that are in the iBooks app, not just actual ibooks), and you can then sync them to your iPhone. Or you might be able to open each PDF in iBooks on your iPad and use the share icon to email them to yourself and then use 'open in' in the Mail app on your iPhone to copy them to its iBooks app (if the PDF is protected then you may not get the email option via the share icon).
    The Settings > iBooks > Sync Collections setting doesn't copy items between devices, it just means that it a bookor PDF is on both devices and you move it into a collection on one device then it will be moved into the same collection on the other device

  • TWO CURRENCIES IN ONE Purchase Orders Release Procedure.

    TWO CURRENCIES IN ONE Purchase Orders Release Procedure.
    Please provide a solution if a release strategy is maintained for two currencies like USD and SGD for more clarification please Read the below Requirement.
    Requirement for Singapore:
    u2022          COMPANY Asia (Singapore) wants its own Purchase order release strategy is based on their local currency (SGD)
    u2022          Whereas COMPANY is using only USD as currency in Purchase order release strategy.
    u2022          Standard SAP works based on Character currency which is defining in Class of Purchase release strategy and converts with Local currency to compare with Character Currency.
    Required analysis:
    u2022          The value assigned in classification is based on Conversion from SGD to USD, Due to Exchange rate fluctuations the assigned value is differ by large amounts and hence system is either determining the higher release strategy or Lower release strategy
    u2022          But during Release Strategy Configuration the Net order Value is assigned as 3600 USD considering the Exchange as 1.388889.
    u2022          As per the exchange rate in the purchase order 1.3799 the system is calculation the PO Net order Value but the Strategy is Determined based on the value maintained according to exchange Rate 1.388889
    In the Purchase Order the system is 
    Ex:  Total Purchase Order Value is 4765.21 SGD and 3453.30 in USD
          For Level 1 the value limit is 5000 SGD if it exceeds 5000 SGD it has to go to his manager (Level 2) Exchange rate on 01.04.2008 is 1.3799.
    System Considerations:
    Possible Solution:
    1.        Create a new Class with Characteristic with Currency Value SGD System should determine the class based on the combination of Plant 6000 and Document Category F Purchase Order.
    2.        By using Enhancement spot with Function Module ME_RELEASE_STRATEGIE/ ME_RELEASE_STRATEGIE_EKKO
    Logic:
    1.        System will determine the class PUR_RELEASE from table T16FG if the system finds Plant as 6000 and Document Category as F Then replace PUR_RELEASE with New class as ZPUR _6000.
    2.        Maintain Z table for the combination of Plant and Class for future requirement
    Edited by: Mohammad Irfan on Jun 8, 2009 10:41 AM

    Hi Mohamed,
      You can create separate characteristics far all check points and assign those to class.
    Regards,
    Prasath

  • SPROXY: No connection to Integration Builder (only local data visible)

    ¡Hola!
    When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)".
    I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Systems with an Integration Engine to the Central Integration Server.  I also checked that the parameters in the Exchange Profile were correct.
    Transaction SLDCHECK is working ok.  The TCP/IP connections SAPSLDAPI & LCRSAPRFC work OK when I do Test Connection.
    In transaction SPROXY, when I do Connection Test the first 2 steps work fine, but I get an error on the last two:
    1.  The address of the Integration Builder must be stored in the R/3
         System
         =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
    Result: OK: Address maintained
    2. The HTTP connection of the R/3 application server must function
    correctly
    =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
    Result: HTTP communication functioning
    The following 2 steps return an error:
    3. The Integration Builder server must be running correctly
    =>Check with report SPROX_CHECK_IFR_RESPONSE
    Result: Integration Builder data not understood
    4. Proxy generation must correctly interpret the data of the
    Integration Builder
    ==>Check with report SPROX_CHECK_IFR_CONNECTION
    Result: Integration Builder data not understood
    I've been looking in the forums and weblogs but haven't been able to figure out what could be wrong with my system.   Can someone please help?
    Thanks and Regards,
    Carlos

    Carlos,
    Check Global Configuration data in R3  using TC : SXMB_ADM.
    You need to set values..Role of Business System : Application System and Corresponding Integration server details.
    Also check your HTTP RFC connection : INTEGRATION_DIRECTORY_HMI
    Nilesh
    Message was edited by:
            Nilesh Kshirsagar

  • Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan

    Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan

    The easiest way is to connect the G5 and your new iMac together via Firewire.  Then you can use what is called "Target Disk Mode" which basically makes the G5 look like an external hard drive to your iMac.  The potential gotcha is if your new iMac does not have a Firewire port.  In that case, you need to get the Apple Thunderbolt-Firewire adapter in order to connect the two machines (as far as I know, all G5's had one or more Firewire ports).  I have done this many times, it's easy and works perfectly.
    Alternatively, you could connect both Macs to the same network and log into the G5 from your iMac.  This involves going into System Preferences > Sharing on the G5 and turning on File Sharing and then logging in from your iMac to the G5 as if it were a server.   (Logging in through the Finder or via Go > Connect to Server).  This also works fine but it's a little more involved than using Target Disk Mode.  I do this all the time and it too works fine.
    Either way, once the two Macs are connected, you will use the Finder on your iMac to copy files/folders from your G5 the same as you would from any external hard drive.  Regarding iTunes, you could just copy your entire iTunes library over to your iMac being careful to put it in the same relative folder location:   /users/yourusername/Music/iTunes   This method will preserve your playlists and album art.  Alternatively you could go into iTunes and do Add to Library but I'm not completely sure doing it that way will bring over your album art and it certainly won't bring over your playlists.
    I see no reason to use a separate external hard drive.  It will just double the time it takes to transfer your files because you would first have to copy everything to the hard drive, then in a second step copy everything from the hard drive to your iMac.
    Note:  In all cases there is the possibility that you may need to change file & folder permissions on the things you copy over so you can access (read & write) to these folders & files once copied to your new iMac.  This is not a difficult process.

  • Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase

    HP Deskjet 4180
    Genuine HP Tri-Color #22 ink cartridge and Black #21 ink cartridge
    Windows 7
    Test printing from Photoshop, Windows Picture Viewer and GIMP.
    Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase.
    The experience that I'm having currently contradicts very good, accurate color from HP cartridges in the past from RGB images that I've printed successfully with this printer.  I've previously got excellent color from the true HP ink cartridges on this Deskjet 4180 printer.
    But today it is obvious that the yellow is not flowing from this cartridge that was installed only a few weeks ago.  And my ink levels are at 50 percent, and they were even higher when I started today... see the screenshots below.
    I'm printing from Photoshop, but for some tests I tried printing from two other applications today but I'm always getting these results that indicate that there is no yellow printing... this is much worse than just a bad color profile.  I'm an experienced photo retoucher and I have a long history of dealing with inkjet printing in the work place with all kinds of printers.
    I know that inks can dry up in their cartridges if they don't get printed with every few weeks and if the printer isn't maintained.  I purchased these new cartridges only about three weeks ago and the first test prints and some prints two weeks ago came out perfect.
    But today this is the result I'm getting... screenshots below show the original RGB image and an actual scan of the bad print results I'm getting, indicating that no yellow is flowing from the HP tri-color cartridge.  And a screenshot of the ink level indicator panel is at the bottom.
    Why is the yellow ink drying up and not flowing so quickly?  How can I prevent this besides doing semi-weekly prints to keep the inks from drying up?  I'm in a fairly humid climat, so dry air is not the problem.  The contact points on the cartridge are clean.
    Does HP guarantee their cartridges for this kind of thing?
    Good color - original RGB image...
    Bad color - actual scan of bad print with no yellow, below...
    Ink levels after test printing...
    Thanks for any help.
    digi

    Well, here is the answer I was looking for, only arrived at by way of my own further investigation and experimentation.
    It seems that no matter who I asked about this problem, I always got the same questions and answers.
    For example, the people at the HP 800 number for consumer help, where it seemed I was not talking to someone who was actually familiar with the product, because they came to the conclusion that I need to buy a new HP printer... wow, isn't that a big surprise for an HP employee to say, "Just buy a new one!".
    No one, and I mean no one, would seem to be able to listen to or understand what I wrote in my original question on this thread about how this printer prints fine when I first put in a new ink cartridge, and then just a few weeks later one or two of the colors seem to be dried up and they won't print.
    And it seems that somewhere I read that you need to print a test maintenance print every month or so to keep the inks from drying up... but the inks seem to be drying up in less than three weeks now, even though I used to be able to go for months without doing a print and the inks would still be fine.
    So when I was talking to someone in India, Malaysia or the Philippines at the HP 800 customer phone support number, after going through so much crap about whether this printer was still in warranty just to have a simple question answered you'd think I was trying to launch nuclear missiles and my launch codes weren't current.
    And it was much the same situation to get on HP's "Live Chat" customer service on the net, and then they'd go through the same line of questions and answers as the support people on the HP 800 phone line...
    Q: "Do you have dirty nozzles on your ink cartridges?"
    A: "No, like I said in my original statement, I cleaned those and they weren't dirty to begin with."
    Response: "Because you need to clean those every so often, you know."
    Q: "Did you try cleaning the contacts on the cartridges?"
    A: "Yes, like I said in my original statement, I already did that."
    Response: "Because you need to clean those contacts every so often, you know."
    Q: "Did you try putting in a new cartridge?"
    A: "Yes, like I said in my original statement, this cartridge is nearly new and it shows a 90% ink level."
    Response: "Because you need to put in new cartridges when the ink runs out, you know."
    Q: "Did you do a test print?"
    A: "Yes, like I said in my original statement, I did a test print and that's what is telling me that the yellow and magenta are not printing any longer."
    Response: "Because that's how you can tell if any colors aren't printing, you know."
    So is anyone else seeing a pattern here?  It's not like I'm talking or live chatting with a real human being, but maybe an automated voice prompt system that only has an A, B, C   or   1, 2, 3   type of response system that it's working from. 
    The people hear a answer, and regardless of what that question was in the troubleshooting category that they are in, they just have a stock response that seems to bypass what the customer's answer was, so it's like I'm talking or live chatting with a machine that is uttering its responses in a fixed pattern, regardless of what I'm saying.
    HP customer service is like talking to someone who isn't listening, so often they ask their next question, but I just answered that question with my previous answer.
    Like I said, the way it used to be, HP or even after market ink cartridges could sit for months without doing a maintenance print and I would still get a perfect print every time.  And that's pretty typical for maybe an older person who isn't printing prints that often, but they just want to print one every few months or so, like my mom, with her HP printer, who I've been troubleshooting this problem for.
    Or even with my own large format Epson printer or any of the pro level inkjet printers and even IRIS printers that I've used in the workplace over the course of the last 20 years... you could do a print every two months and there was no problem with dried up inks.
    And I know somewhere in the past  I read that the maintenance print that the instructions was recommending be printed only needed to be done every 4 to 6 weeks to keep the inks from drying up, although when I go through the entire full blown PDF instruction manual now I can't find ANYTHING about how often a maintenance print needs to be done... that's right, nothing!
    But on Christmas eve I once again exchanged my last, dried up HP tri-color ink cartridge at a Walgreens store where my mom had purchased it months prior (and the guy was nice enough to exchange it even after 5 months)  which was yet another HP tri-color ink cartridge that had at least two of it's colors dry up after only a few weeks.  At that Walgreens they had been nice enough to replace three prior HP tri-color ink cartridges with the same problem in the last year, and before that three different after market, off brand tri-color ink cartridges from another store had dried up after only a few weeks.
    So the guy at Walgreens told me that now  with HP cartridges you need to do a maintenance test print EVERY WEEK in order to keep the inks from drying up... THAT'S EVERY WEEK YOU ARE NOW SUPPOSED TO DO A TEST PRINT FOR MAINTENANCE.
    Now, you DO NOT need to do one of the test prints where it prints a photo of a pear, which uses quite a bit of ink, but you can just do one of the self test prints where you hold down on the CANCEL button and then press the COLOR COPY button and it prints a quick test page with just a little color and a lot of B&W text, and that's apparently enough.
    And that seems to be enough to keep the ink cartridges from drying up, the way they seem to be otherwise doing so quickly now, as opposed to how HP and other brand ink cartridges used to.
    And in fact, now after about a month, after doing weekly self test prints, the ink cartridges are still flowing well and they just did some full color prints quite nicely... ALERT THE MEDIA AND ANYONE WHO CONSIDERS THEMSELVES HP PRINTING EXPERTS!
    So the questions I would ask myself are these...
    First, why is it that NO ONE at HP customer service knew this, whether it be on the HP 800 phone support or on the HP "Live Chat" with people in India, Malaysia and the Philippines, or even here on the HP Help Forum with so-called EXPERTS from HP?
    Second, how have the inks changed so that in the past, you didn't need to do maintenance prints every week, but maybe every two months at the most, in order to keep the inks from drying up, but now the inks dry up in a matter of less than two weeks unless a maintenance print is done once a week?
    Have HP and other ink makers changed the formula of their inks so they dry up much faster, forcing people to buy new cartridges when the last ink cartridge is still at a 90% level with dried up ink?
    And as a result, are people on the HP 800 customer phone support line and on HP "Live Chat" telling people that they need to buy a new printer, when in actuallity their ink cartridges are just drying up within a new record short period of time?
    You tell me, HP experts.

  • Should I set two categories? Why doesn't everyone do this?

    When you post an app, you can put it in two categories.
    Is there any reason I shouldn't use both categories for my app like so:
    Category 1: games action/strategy
    Category 2: games puzzle/adventure
    This way I would get exposure in 4 sections... and if I can do this, why doesn't everybody? It seems like everyone only uses 1 category, like games action/adventure...
    Thanks

    applehund wrote:
    @kt: thanks for replying. From the sounds of it, I definitely should be using the second category for the additional search term then?
    And I should put my game in both
    games strategy/action
    games puzzle/action
    Thanks
    Semantics of 'put' aside, the concept is that you will be using one primary category. Pick one for that purpose and select another for general cross-over and go. Your plan looks fine - good luck w/your efforts.

  • HT4279 Only two screens will work on my 5870 Radeon

    I have a 6 core 3.33Ghz Mac pro running latest lion software. Just fitted a 5870 Radeon.
    Only two of the three screens will work at any one time. A 24" Apple Cinema HD (Dvi) and two Dell 1708FP (these have an DVi to mini port adaptor each).
    I have swopped them round to all possible configurations. Changed leads etc etc.
    Can anyone help please

    To get three screens to work with adapters, all adapters must be ACTIVE, POWERED adapters. Apple Dual-Link adapters for this job work fine, but are pricey. These are more that ATI has tested:
    http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx
    Adapts:  Mini DisplayPort™   To:  DVI-D Single Link Active
    AMD Status
    Manufacturer
    Part Number
    Max. Resolution
    Purchase
    Gold
    Accell
    B087B-006B
    1920x1200
    Buy Now
    Gold
    Bizlink
    KS30015-131
    1920x1200
    Coming Soon
    Gold
    Startech
    MDP2DVIS
    1920x1200
    Buy Now
    Gold
    Wieson
    G9858C219-006-H
    1920x1200
    Buy Now
    Many are available on Amazon, but shop with great care, as Amazon's search is "fuzzy" and will include stuff that does not quite match (and will not quite work).
    This one is US$32 with super-saver shipping:
    http://www.amazon.com/Accell-B087B-006B-DisplayPort-Single-Link-Certified/dp/B00 4071ZXA

  • Subitem categories within a Purchase Order

    Hi all,
    we would like to use subitem categories within a purchase order on our project, but unfortunately nobody knows
    1. where to maintain them
    2. how the system can be influenced by the subitem categories
    Does anyone has a documentation about these subitem categories/knows where to maintain them?
    Thanks for your help and kind regards
    Jan

    Dear Jan,
    Thanks for reward,
    Go to MM01 create two or three materials as your requirement.but dont forgot when you creation  material maintian in sales org2 -> gereral item category group NORM item category group ERLA
    In ERLA means no stock for sub items
    if LUMF means maintain stock for sub items.
    come next CS01 and give main material and plant and bom usage then material give two material nos system automatically will takes through material master according ERLA and LUMF,.
    Hope this helps you
    Prem.

  • HT1386 I have synced the items from itunes to an iphone 4 without problem, except the two albums I just purchased did not sync.  They show up on the itunes on my desktop and on my ipod, but not on the new iphone.  What do I need to do?

    I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod.  I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone.  Everything transfered, and those were albums I had uploaded (not purchased from the itunes store), except the two albmus I just purchased from the itunes store.  They appear on my itunes on the computer and ipod, but not on the iphone.  What did I fail to do or did I do incorrectly?

    This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

  • How can I use two "Status profile" for two categories of users?

    Hi friends,
    I tried to configure two categories of users :
    1 - First category (User1) can process the message and access to the standard Status profile (SLFC0001),
    2 - The second category (User2) can process the message using another status profile (ZSLFC001).
    To do this, i process like following :
    1 - I created ZSLFN autorization key by copying of SLFN (Tcode :BS52).
    2 - I created the Status Profile "ZSLFC001" by coping the SLFC0001(TCode : CRMBS02).
    3 - I suppress some user status (ex : send to sap) and I replace SLFN autorization key by "ZSLFN"
    4 - I created Transation type "ZLFN" assigned to ZSLFC001 status profile.
    5 - I created a ZSAP_SUPPDESK_PROCESS rôle and I set the ZSLFN as authorization key in "B_USERST_T" and in "B_USERSTAT". This role is affected to the User2
    Unfortunately, the User2 see and access to the "Send to SAP" user status. I think that the status profile ZSLFC001 is not used!!!
    Tank you for your help,
    Samad

    Hello Xavier,
    I changed the Process Type in DNO_CUST04, and I had a error message : "The system could not create the message because of an RFC connection "NONE " error Message was not created".
    Furthermore, The change of process type will affect all users.
    I think that there are two possibilities :
    - Using process type (SLFN or ZLFN) according to the user processor,
    - or using the same process type (SLFN) and according to the processor to load the appropriate "status profile".
    Please find below more informations about the role:
    - the Manually   Status Management: Set/Delete User Status                    B_USERSTAT
       Activity                  :    01, 06                                
       Authorization key   :    ZSLFN                               
       Object Category     :     *                                          
       Status Profile         :    *                                          
    Thank you
    Best regards
    Samad

Maybe you are looking for

  • Error while opening cursor

    Hi , In a procedure , I have a cursor query which gets me the sum of a sum(to_number(field_value1) grouped on a list of other fields.The datatype of that field_value1 is varchar2 It has been running fine till now.But somehow , some non-numeric charac

  • Flash Video will not play anywhere.

    In my hunt to solve this problem, I've come across a lot of posts where people have embedded FLV files in HTML documents and can play them fine on their local computer. But once posted to a server, they will not play. Well, my problem is similar exce

  • Disappearing footers in PDF generated from FrameMaker 9

    Myself and three other writers are having a problem with disappearing footers in FrameMaker.  Here's the problem:  In FrameMaker, the footers display correctly.  When we convert a book to PDF, many of the footers disappear.  What we find is that a fo

  • Music activation problem

    This phone is already registration with a Nokia Music unlimited subscription this error is coming while downloading music

  • How to activate hotspot in iphone 4S

    How to activate hotspot in iphone 4S. I am using BSNL Network in India