Only use htmldb_item once per page?

Not sure how to word this correctly.
Am I correct in assuming that I can only use the htmldb_item once per page? I know it can be used multiple times within the tabular report, but if I used it again on the same page in a different region, how would it be distinguishable from a previous iteration?
Say I have two regions on a page, both with manually created tabular reports using the htmldb_item syntax. It's not apparent to me (if there is a way), on how using the htmldb_application syntax to distinguish between region 1 and region 2. They both would wind up with g_f01, etc. variables, but I don't see any other characteristics to differentiate between them, like maybe passing a region (or any other) name to the htmldb_item construct so the the arrays could be distinguished more?
This is all new to me, I've been out of loop for the last 8 years doing manual data cleanup from an old database that was basically a spreadsheet (a real mess!), so forgive me again if I'm missing anything obvious or just way off base.
Thanks.

Bill,
You are correct that you want to avoid populating values in the same global arrays g_f0n more than once by creating tabular forms in two regions. It would be hard to distinguish from which region values in a particular array came. You can, however use g_f01..g_f10 for one region and then g_f11..g_f20 for another region.
This assumes you're doing manual process of these arrays, because the processes used by the wizard can only deal with one tabular form per page.
Sergio

Similar Messages

Display column titles only once per page

Hello,
I am a newbie to BIP (R12.1.3). Below is how the output data shows up in my custom template:
Vendor type lookup : Expense
Vendor no: A12345 Vendor Name: Test Vendor1 Vendor Category: Expense - Construction
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
======== ====== ========= ====== ====== ====== ============
Kannapolis A#12345 03-MAR-12 15-MAR-12 1000.00 1000.00 Check
Vendor no: B12345 Vendor Name: Test Vendor2 Vendor Category: Expense - Rents
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
======== ====== ========= ====== ====== ====== ============
Test Site B#12345 03-MAR-12 15-MAR-12 1500.00 1500.00 EFT
The column titles repeat for each vendor since the titles are in the for-each loop under the vendor grouping. However, is there a way to restrict the titles to show up only once per page on all the pages? I tried putting the titles outside the vendor grouping but with in the vendor type lookup grouping. It is displaying the titles only on page1.
Thanks,
Monkey

Hi, could you try Inserting the code <?if:position()=1?> before the header of your template and the code <?end if?> after the header of your template.
See the a sample code below:
<?if:position()=1?>
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
<?end if?>
Thanks,
mr_bip_learner

Restrict Repeating frame header to print once per page

is there any way I can restrict the repeating group header to print only once per page, inspite of the fact that the group has now changed ??

Hi,
There is an option in Frame properties -> Show objects in -> you can choose first page so that the objects will be displayed in the first page.
What do you mean by 'group has now changed'?
Regards,
Soofi

Print Boilerplate once per page

How can I print boilerplate once per page in between parent and child records? I tried using a summary column with Reset-At:Page, but I can't reference a Page-level column within a Format trigger. Any other ideas?
(thanks in advance)
pat

Hi Vijay,
In the layout, expand the parent repeating frame so that there is enough room for you to insert the boilerplate text - the text must be in the parent repeating frame and not in the child repeating frame.
This should give you the boilerplate text once per parent record (not once per page).
Regards,
John

Why does my printer only use 25% of the page and shrink to fit?

when i print certain things it only uses 25% of the page. It is so small i can't read it. If i go to print preview and modify the size, it puts it on multiple pages. I can't figure out how to change any settings.

Firefox extracts the paper size information from your Windows printer settings, so that's the first thing to check. In the print dialog, if you click the Properties button and review the dialog for your printer, do you have a small paper size selected and can you update it?
If Windows is correct and Firefox is mistaken, you can reset the stored paper size using the about:config preferences editor.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste '''paper''' and pause while the list is filtered
(3) Look for your printer's paper-related settings and then right-click and choose Reset for each (e.g., size, height, width, etc.).
If you return to your document and try Print Preview, does Firefox compute the correct size?
More troubleshooting suggestions: [[Fix printing problems in Firefox]]

Is it possible to lock a 3G sim pay as you go so you can chose to only use it once all WIFI possibi

is it possible to lock a 3G sim card pay as you go so you can chose to only use it once all WIFI possibilities have been tested?

You can turn off Cell Data in the Settings. Your iPad should then not be able to connect to your cell service until you turn that setting back on.
Regards.

I downloaded a 30 day trial less than a week ago and have only used it once...?

I downloaded a 30 day trial, have had it on my computer less than 7 days and have only used it once. Now, when I go to open it up, it only gives me the option to license the software. How do I get the rest of my 30 days worth?

leleonly7 wrote:
I downloaded a 30 day trial, have had it on my computer less than 7 days and have only used it once. Now, when I go to open it up, it only gives me the option to license the software. How do I get the rest of my 30 days worth?
Hmmm... that's a tricky one. I'm going to suggest you ask in the Creative Cloud forum, because they are better at installation issues
https://forums.adobe.com/community/creative_cloud
You _might_ find the answer here though
https://helpx.adobe.com/creative-cloud/help/install-apps.html
Or just get the Photography deal subscription for $10/month. I promise you will never regret it, and a year from now, you might even be a famous image manipulator! On the other hand, if you don't have Photoshop, you will never be a famous image manipulator. You know it makes sense. :-)
Good luck

Google Advanced Search only displays 10 Results per page in Firefox 3.6.10

In Google Advanced Search, choose any value for Results per page greater than 10 and do a search. When using Firefox 3.6.10, only 10 results are displayed on each page of results. 10 results per page is the Google default, and the Results per page selection apparently has no effect.
This problem also happens in Google Chrome 6.0.472.63.
The Results per page feature of Google Advanced Search is working properly in other browsers, such as Safari 4.1.2 on a PowerPC Mac and IE 7.0.5730.13 and IE 6.0.2900.5512.xpsp3_gdr.100427-1636 on a PC running Windows XP

Google recently made some changes to the Google search site with the addition of Instant search and that made the setting of the number of results in the Google settings to stop working. 
 
If Instant search is enabled on the [http://www.google.com/preferences?hl=en Google Search settings] page (link at the top right) then you only get 10 results. 
You have to disable instant search and reload the result page and then set the number of results to your preferred choice. 
It may not work if you make both changes at the same time. 
 
There is a link directly to the right of the Google search field on the Google results page. 
That is a button with a drop down list: Instant is On/Off.

How to make Time Machine only back up once per day?

I really really don't need time machine to back up EVERY HOUR. It's overkill for me and with the level of computing I am forcing my computer to do most of the day its VERY irritating. Is there anyway to change the settings so it only backs up once every night?

Yeah, we tried using TimeMachineEditor on a friend's laptop. There will be 2 laptops backing up, and we wanted them both to backup overnight at different times when there would be no interruptions (for user or computer). It seemed to work OK (have to check w/ them), but how do you verify when backups were actually done?
I have a couple related question to this, though, that may also be helpful for folks:
- I'm guessing Time Machine cannot do a backup when the computer is asleep, correct? If a Time Machine backup starts while the computer is 'awake', will it keep the computer from sleeping so it can finish?
- If I set a schedule in the Energy Saver preferences to 'Wake Up' the computer at midnight (before scheduled backup), and 'Sleep' later on (say 4am), does this override the other preferences set for sleep in Energy Saver? (ie - if it's set to sleep after 30min., will the computer wake up at midnight only to go back to sleep 30min. later, or will it stay 'awake' until 4am?)
- Do you need to uncheck 'Put the hard drive to sleep when possible'?

Browser Only Shows 35 Rows per Page

I have a Business Exploder query that I display on the web. However, it only shows 35 pages at a time. Can I increase this to all rows? I don't see an option in the query properties, and I don't have access to any stylesheets.
Thanks.

For table web item, set the specific property - "Number of Data Rows displayed" to 0 (zero) This will show all of the records returned.
But be careful about large number of rows as browser will go for a spin. It does not stops as excel does for 6000 rows.

Export excel setting Page header once per report not working

Hi All,
      I am having a java web application which creates the predefined template reports in pdf or xls or rpt format. I have a requirement where in case of XLS format, the page header should be displayed ONCE PER REPORT. I have Crystal Reports XI release 2 and Java 1.5.
    I am setting from java code
     formatType = IReportFormatOptions.CeReportFormat.EXCEL;
     reportFormat.setFormat(formatType);
     IExcelFormat formatExcel = (IExcelFormat)reportFormat.getFormatInterface();
     formatExcel.setExportPageHeaderFooter(IExcelFormat.CeReportExportHeaderFooterOption.ONCE);
I have installed a patch named Excel Export patch which basically sets some registry entries
Set HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal
Reports\Export\Excel\PageAreaExportType to 0 for default behavior, 1 to display no page area, 2 to display page area once per report, and 3 to show the page area once per page.
Set HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal
Reports\Export\Excel\ColumnWidthBaseArea to 0 for default behavior, 4 for column width based on detail
section.
I have set PageAreaExportType to 2 and ColumnWidthBaseArea to 0 and 4.
Still i see the page headers repeating on every page. Could you please help me in resolving the issue?
Thanks in advance.

Currently in our new version of java application, we are not using DHTML viewer. Predefined report templates are published on crystal server and from Java application, we send the report parameters to the crystal and also specify the format type.
Exporting excel from the crystal template is working fine with the page headers repeating only once (have set the page header show once per report option before exporting it to excel). But the same is not happening from the Java application. i have attached the required files to the message that i posted. If you have the access you can take a loot at them.

Report error using landscape style, lines per page errors.

Hi
A Custom report(use character units in designer,11 X 8.5, stadard settings...) developed(reports 2.5 on apps 11), which was working fine previously using standard landscape. The report produces exactly 56 lines physically per page.
Now, in applications ,landscape print style is properties changed, number of rows changed from 66 to 57.
Now report gives error:
'M_XXXX_GRPFR' is not fully enclosed by its enclosing object 'Body'. M_XXXX_GRPFR is the outer most frame in my report layout.
(I tried increasing page size, etc, no use, same error)
Now, I don't understand why it is giving error, as, it prints only 56 physical lines per page when I see the output file generated.
Is that landscape is defined as 57 rows, but it is not exactly 57 physical lines? Because when I took out some stuff from report layout, which now produces only 45 physical lines, it is working fine.
But, I have all 57 phyiscal lines in the report that I want it to work, any suggestions?
Thanks
Rathan.
null

Hi,
Try this, i might work for you.
<?for-each:Q1?>
Here, place KIT ITEM Data table
Below that:
<xsl:variable name="no_of_lines_per_page" select="number(30)"/>
<xsl:variable xdofo:ctx="incontext" name="invLines" select=".//Q2"/>
<?for-each:$invLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
[here KIT COMPONENTS tabel will start]
[In table first cell again start for-each group like below]
<?for-each:$invLines?><?if:position()>=$start and position()<$start+$lpp?> ---this is in table first cell
[in rest of cells, put your columns xml tags]
<?end if?><?end for-each?> - in last cell.
this is end of Q2 table.
After that put a page break
<xsl:if xdofo:ctx="inblock" test="$start+$lpp<=count($invLines)"><xsl:attribute name="break-before">page</xsl:attribute></xsl:if> -- page break outside the Q2 table.
Now close the invlines for-each group
<?end if?><?end for-each?>
Close the Q1 for-each group.
<?end for-each?>

Public and Authenticated App with Authorization Scheme once per session

I have a question . . .
Let's say I have an application and at the application level I have an authorization scheme (auth1). If auth1 is set up to evaluate once per session, does it authenticate for the public user, then pass me back to the page and then check then evaluate the auth1 scheme. Or does it evaluate the auth1 scheme, then log in, then return to the page. Is it the same regardless of authentication scheme (e.g. Oracle SSO).
It may make a big difference. If the authorization sheme is based upon the user (most will be) then setting it to evaluate once per session can be a real problem. If it evaluates before the user logs in, then it won't really work.
This is an even bigger question when the application does not have a authorization scheme at the application level and allows public pages. If a page that is not public has an authorization scheme set, and the user goes directly to that page, it seems to authenticate the authorization scheme and then logs you in, but does not re-evaluate authorization scheme after you are logged in. Is this accurate? I realize that I could set it up to evaluate for every page view, but I really only need it once after login.
Is this clear?

Anton,
It seems that all authorization schemes that are set to evaluate once per session are evaluated with the beginning establishment of a session.Sort of correct. Authorization schemes don't get evaluated until the component that uses them is considered for rendering or processing. So if the authorization scheme is attached to a page, it won't fire until the page is requested. If another component uses that scheme first, the evaluation will happen then and will not happen again during the session.
What if I have another page that is not public. If it is the first page I go to, what happens. Obviously, I get redirected to login, then login. Do the authorization schemes get evaluated at this point?Yes, assuming the authorization scheme is used by the page, the scheme is evaluated during the first rendering or processing of the page in the session, after the authentication step.
Now, what if I have a page that is public, but also has an auth scheme (odd, but could happen). Now what happens, does the auth scheme get evaluated before or after login?During the rendering or processing of the page after the authentication step. For a public page, the authentication step is performed up to the point where it determines that no authentication is required.
OK, now let's add in Application level auth scheme. I can have public or private pages. If I go to a private page, when does the app level auth scheme kick in? How about for a public page?When an application uses an authorization scheme, it gets evaluated before the authorization scheme (if any) for the page that is being requested, so the public/private property of the page doesn't matter.
General advice: when an authorization scheme uses :APP_USER, it doesn't work well to have it fire once per session because it'll get run before authentication to the application occurs, which sets APP_USER. You can have such schemes fire once per page view and for PL/SQL function-type schemes, have them give a "pass" when the current page is the login page, that kind of thing.
In addition, if the overhead of running a scheme is high, one can set an application-level item to indicate that a once-per-page scheme has already run satisfactorily. The PL/SQL-type schemes can access the value of such an item to skip the expensive part of the evaluation and return true immediately.
Finally, the htmldb_application.reset_security_check API can be called in order to reset the "fired" status of all authorization schemes in the session, allowing them to be re-evaluated if/when they are encountered again in the session.
Hope this helps,
Scott

Data Merge Multiple Records Per Page Greyed Out

I am using InDesign cs5.5. I am attempting to create a catalog with the data merge option. I am attempting to do a data merge from the Master Page.
As you can see in the image, I have inserted my fields from the data source file. All images, original file, and data source file are in the same folder. I am inserting this info on the left sheet of the master file. When I select "Create Merged Document" the "select multiple records per page" is greyed out, however, there is plenty of room on the page for the 8 records I want it to show. See image below.
After watching tutorials, reading, etc. I made sure that my document does not have facing pages. I deleted my "page 2" to avoid that conflict. I made sure that the placeholder "allows overwrite from the master". I also deleted my "cache"/settings" by doing "ctrl, alt, shift" when reopening the program. I read that it may be because the files need to be on the right hand sheet of the master, however, when I move my info to the right sheet, I get the following message.
I have watched the tutorial videos, read the entire help section regarding data merge, and have correctly created my data source file. I've tried everything I've seen on the forums, apart from uninstalling and reinstalling. Please tell me that someone can help me figure this out as soon as possible. I'm in crunch time!
Thanks a lot.

Thanks Peter. That helped me un-grey the multiple records. I was able to complete a data merge, however, this is what happens.
As you can see in this image, I have the margins setup the way I prefer, and the data merge previews correctly.
Once I click to merge, this is the new document I get - it's only putting one record per page (even though the multiple records per page is selected), and it inserts this layout, not onto actual pages in indesign. It looks reall odd.
And when you scroll down,
Any suggestions on fixing this?
Also, my InDesign freezes up when I try and do a merge of my entire sheet (182 items). The images above are when I tested doing just records 1-32.
Thanks in advance and thanks for being so prompt yesterday. Very helpful.

Displaying one currency symbol per page on groups

I have a report that displays data at grouped levels only. I need to display the currency symbol only once per page on certain fields. While this works on the detail section, it's not working on the group header/footer sections. Does any one know how to limit the currency symbol to one per page on a grouped field? Thanks.

Hoperfully this will make my problem a little more clear:
My report groups on FIELD_A and sums $FIELD_B at the group level. The report displays Group Footer 1 which contains the group name FIELD_A and the sum of $FIELD_B. The user can drill down on the FIELD_A group to see the detail. I only want the currency symbol for the sum of $FIELD_B to be displayed once on each page - on the first line of each page. When I format the sum of $FIELD_B field at the FIELD_A group level, the "display currency symbol once per page" option does not work. I could use a conditional statement to set the currency symbol for the sum of $FIELD_B but I'm don't know how to determine if the sum of $FIELD_B is the first instance of the field on a page.
GROUP FOOTER1 GROUP FIELD_A SUM($FIELD_B)
DETAIL FIELD_A $FIELD_B
Edited by: Susan Scott on Jul 29, 2008 2:37 PM
Edited by: Susan Scott on Jul 29, 2008 3:51 PM

Only use htmldb_item once per page?

Similar Messages

Maybe you are looking for