SCOM 2012R2 Network Vicinity View doesn't show agent managed PCs

Hello,
Network Vicinity View in my SCOM only shows other network devices+management server, but does not show any agent managed computers, why is that? Or is it supposed to be like that and i'm missing something here?
Thank you

Hi,
Things to try in the vicinity view:
Select a node or connection to view details for that node or connection in the
Details view.
Change the levels of connection to be displayed in the diagram by selecting a new value for
Hops in the toolbar.
To include agent computers in the view in addition to network devices, select the
Show Computers check box.
Select a node in the vicinity view. In the Tasks pane, click the option to launch the Network Node dashboard.
To change the central device of the view, select a device, and then click
Vicinity View.
For more information, please review the link below:
Viewing Network Devices and Data in Operations Manager
https://technet.microsoft.com/en-us/library/hh212706.aspx?f=255&MSPPError=-2147217396#bkmk_networkvicinitydashboard
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Dreamweaver design view doesn't show the bottom part of a long div

Hi!
I'm doing a very graphics oriented site, which basically requires me to use a large jpg as a background image and placing text areas against this background using absolute positioning.
My problem is that Dreamweaver doesn't show me the bottom part of my content div's background, but renders it as black instead. This obviously makes placing the text areas correctly difficult, since I can't see them against the background.
If I turn on Live view, then Dreamweaver shows the bottom part correctly. But in live view I can't use rulers and guides (or can I?).
Is there any setting that I can change so that Dreamweaver is showing me the whole div bg in all situations? One possible cause of this problem might be also that I'm using overflow:scroll on my content. Could that be why Dreamweaver hides the bottom part and can I change that behaviour?
Any ideas are welcome!

If we can see the page in question we could probably do this a lot easier. But all you need to do in your CSS for the background is:
background: url(pathto/image.jpg) fixed no-repeat;
If you are trying to absolutely position something in the middle you will be unable to do this without the assistance of javascript to determine the useable pixels on the end-users computer. Horiztonally is not the issue, but rather vertically because you can achieve horizontal centering by defining a width and setting the margin: 0 auto; in your CSS.
As far as working with overflows, if there is too much content in them that you believe the overflow will be necessary (assuming min/max-widths are set) you could consider including the content from another document or store it in a database and query the information out. Then it would make it easier for the client to update the content on their own in the future.

Mandatory Variable set in a view doesn't show in Web template ?

Hi Experts,
I have a mandatory user-input variable in my query. I build a view based on the query. When I opened the query analyzer I had to select a value for my variable since it is mandatory. I did so and built my view. I based my BI web template on my view. When i execute the template the variable screen doesn't show, the value of my variable is the one I entered when I built the view and there is no way i can change this value from the Web template. Is this expected behaviour ? If so how can i build a view when i have a mandatory variable withoit setting its value in the analyzer ? The user has to set it later in the BI template.
Thanks a lot
Rado

Thanks for the reply.
Actually the variable has a default value which is defined in a function. This default can be overriden. The problem is that when defining the view you need to specify a value or leave the default. In any case in Web Template you are not given the option of changing whatever you put in the query analyzer. i am puzzled how this could happen.

Compiling a view doesn't show errors

Hello,
Compiling a PL/SQL procedure shows compilation errors correctly, but compiling a view says "view compiled" without reporting the errors. It seems the only way to see the errors is to do select * from user_errors afterwards. Or is there a setting somewhere?
It's also slightly odd that it asks for confirmation before compiling the view, whereas PL/SQL compilation does it right away. I'd prefer the latter.
I'm using version 1.5.1 on Linux (Ubuntu).
Many thanks
Ed

How are you compiling your view? The only place I can remember being given feedback on view errors is when running a create or replace view command as a script (not as a statement). Apart from that, selecting from user_errors is the only way that I know to report on view errors - even "show errors view <viewname>" doesn't work.
theFurryOne

Net view doesn't show all network computers in Windows 2012 R2

We have Symantec Endpoint v12 running on Windows 2012 R2. It used to be working fine and we could see all network computers in Endpoint Protection Manager. Since last Friday, the Endpoint Protection Manger can see only two computers. If I run new view
command on the server, it also shows only these two computers. If I open Windows Explorer and then Network, I can see all network computers. The network discovery and share has been enabled. Other servers and computers don't have this problem. What could be
the issue?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

rebooting the server fixes the problem.
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com
yeah most of the time "rebooting" works..
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Month view doesn't show

day and week view are fine, selecting month view and the window disappears. Has been working fine - though I did run system optimise recently...

This is the same problem I have with my iCal. I open iCal and the week and day views come up fine, but as soon as I click on the month view tab, iCal closes the viewer. It doesn't crash the entire program, but the month display does not show up and I love having this option. I have spent some time reading through previous threads, but they do not appear to apply to my situation, unless I am missing something.
Can someone please suggest anything that would help?
Are there conflicting version of iCal after an upgrade?
Where do I look for this on my Mac OS X 10.3.9?

Network adapters (NIC) doesn't show up in NIC Teaming manager

We have been running Windows Server 2012 R2 for couple of months now with no major problems, but recently had to swap out one of the NICs. Unfortunately interfaces were not removed from Team before it was swapped out and that appears to have screwed up something
in Windows NIC Teaming manager - NICs doesn't appear there anymore. Not even the NICs that were not touched.
Network interfaces appear to be connected, no issues with drivers (screen shot from device manager), but they don't show up in NIC Teaming, any idea how to reset NIC Teaming manager and/or resolve this issue without reinstalling Windows?
Thanks!

Thanks for leading me the right direction!
Looking around I found that one of "invalid class" error causes is corrupted WMI. Using this script provided by MS to Rebuild/Re-register WMI (different case/problem, but WMI is WMI...) resolved the issue with NICs not showing up:
@echo off
sc config winmgmt start= disabled
net stop winmgmt /y
%systemdrive%
cd %windir%\system32\wbem
for /f %%s in ('dir /b *.dll') do regsvr32 /s %%s
wmiprvse /regserver
winmgmt /regserver
sc config winmgmt start= Auto
net start winmgmt
for /f %%s in ('dir /s /b *.mof *.mfl') do mofcomp %%s

ICal in Day view doesn't show hours, but Days for the hours?

Ok, so I have been trying to figure this out but I cannot find the answer. In iCal, I cannot change the hour of a new event. It only allows me to change the min. So I went into the Day view to try and move the events to the correct hours and all it shows is Midnight, Saturday over and over (where the hours should be) and then Noon and then Saturday over and over again. I have no idea why it does this and have searched through the settings and cannot figure it out. Can anyone help me?
I have posted a screen shot of my problem at
http://public.me.com/dozierredraider
Thank you

DozierRedRaider,
Welcome to Apple Discussions.
First of all try refreshing the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the .plist file to your Desktop, log out/in or restart and check iCal for normal behavior.
If that is unsuccessful, open System Preferences...>Language & Text>Formats, and choose, or change the appropriate region. Then check/change the "Times" formats that you are using.
;~)

Month view doesn't show all events

Dear friends
Something strange started to happen with my iCal.
When I choose month view no events are shown at all.
They are all there because tehy´re shown both in week and day views.
Any clue?
L . gustavo

I have something very similar going on around on two machines used by colleagues.
One is a PowerPC G5 desktop and the other is an Intel MBP.
Weirdly enough, the events don't show only in october (month view), which is the current one.
We have found that by clicking one of the forward / back buttons you can see the next and previous months correctly, AND if you get back to october everything shows up again.
So there seems to be something wrong with the UI or sorta thing.
Both machines are up-to-date (10.4.10). Mac OS is set to run in US English.
Anyone? Help?

Organizer folder view doesn't show pictures

All of my pictures on my computer have been imported into Organizer (PSE 9). When I choose the display option of "Folder location," and click on one folder, sometimes the pictures show and sometimes they don't. And some of the pictures show and some don't. Most of the folders show no pictures. Right now I want to edit a picture but I cannot get to it in Organizer because in the folder it's in, only 3 of maybe 20 pictures show and it is not one of them. Many pictures show in Windows(7) Explorer that have never shown in Organizer.

Hi ,
Have you imported the files in Organizer. If not then right click on the desired folder shown on the left hand side in Folder View. Choose the third option which says 'Import to Organizer' to import and view all of the folder's files in Organizer.
If I have understood the problem incorrectly and you have already imported those files to Organizer then try this : Switch to thumbnail view for a while. Search and select the file you want to work on. While the file is still selected in thumbnail view, choose to switch to Folder View to verify if the file is still not shown in Folder View ?
Hope this helps. Thanks

Content viewer doesn't show folio preview on connected iPad

Hi all,
since I updated the content viewer on the latest version (3.0.0), I don't get a preview of my ID article on my connected iPad (from the panel "folio overlays")! What kind of bug is this? I really often use this function and I MISS it now!! What can I do?
Can anyone help?
Thank you

Hi, thank you, but I don't find my kind of problem there.
I try to describe better...
BEFORE, I could always see a preview of my actual Indesign Document in the conten viewer. I would just connect my iPad, then choose "Vorschau auf dem iPad" (preview on the iPad) in the folio overlay panel.
NOW, I don't get this choice any more; Indesign only shows "Preview on the desktop" - ALTHOUGH I have my iPad connected and my content viewer running.
I have the same problem with two Macs and two iPads, so it really seems to be some kind of bug on this latest content viewer version?!

Imovie: viewer doesn't show

Hello! I' working on a G5 Dual, iMovie08 7.1.1, imported HDV-material from Canon HV-20, my clips don't show in the viewer, but only in the thumbnails.
How can I reactivate the viewer? (Older projects in DV do show still...)
Can anyone help me, please?

I double checked everything and found out that on my wife's computer iMovie '09 was installed and not '11.
After installing imovie '11 everything is working as I'd like.

IMovie '11 viewer doesn't show other user's projects on external HD

I would like to free my wife's and my computer main harddisk from the lot of iMovie projects and events.
To do this I thought of copying all the projects and events to an external harddisk which then will attached either to my or my wife's computer.
I did this with 5 imovie '11 projects copied from my computer. My iMovie '11 does recognize the projects but when I attach the external harddisk to my wife's computer her iMovie '11 displays the harddisk and the folders in the project folders but the 5 projects are not displayed.
Is there a way to make them show up in my wife's (or any other person's iMovie '11 attached to the external harddisk) iMovie?

I double checked everything and found out that on my wife's computer iMovie '09 was installed and not '11.
After installing imovie '11 everything is working as I'd like.

Design view doesn't show in Dreamweaver

What do I need to do to activate Design View in Dreamweaver. I get Split and Code, but not Design. Have examined every possible drop down menu and preference and find no way to activate this. Do I need to reload?

See Screenshot:
If you still can't see Design View, you must be working with Fluid Grid Layouts.
Open your Fluid Grid CSS file and add an X as shown below. This will trick DW into thinking it's a normal layout so you can use Design View.
    Dreamweaver Fluid Grid Properties
    dw-num-cols-mobile:     X 4;
    dw-num-cols-tablet:        8;
    dw-num-cols-desktop:    12;
    dw-gutter-percentage:    25;
=====================================
Nancy O.

SharePoint Designer - Data Source Details doesn't show all Managed Metadata Columns

Hello all,
I've an issue with SharePoint Designer in combination with managed metadata columns.
I use content type which uses it total 7 managed meta data (site) columns and additional 20 columns for data.
I use a dataview and I'm aligning the XSLT for the display of the data.
In the Data Source Details all other columns will be displayed but from the managed metadata columns 3 columns are missing, they are not shown. So it seems impossible to me to access the data in the XSLT.
During my investigations i've found out that the columns will be displayed if I change the DataSourceMode="List" to DataSourceMode="ListItems". Nevertheless, the missing columns are still empty even they should contain data.
Do you have any idea what causes the issue?
It seems like there is a restriction in SharePoint Designer 2010 and/or SharePoint 2010 with regards to the count for the use of managed metadata columns.
Would appreciate any help and idea.
Thanks in advance,
Stefan

Hello all,
I've an issue with SharePoint Designer in combination with managed metadata columns.
I use content type which uses it total 7 managed meta data (site) columns and additional 20 columns for data.
I use a dataview and I'm aligning the XSLT for the display of the data.
In the Data Source Details all other columns will be displayed but from the managed metadata columns 3 columns are missing, they are not shown. So it seems impossible to me to access the data in the XSLT.
During my investigations i've found out that the columns will be displayed if I change the DataSourceMode="List" to DataSourceMode="ListItems". Nevertheless, the missing columns are still empty even they should contain data.
Do you have any idea what causes the issue?
It seems like there is a restriction in SharePoint Designer 2010 and/or SharePoint 2010 with regards to the count for the use of managed metadata columns.
Would appreciate any help and idea.
Thanks in advance,
Stefan

SCOM 2012R2 Network Vicinity View doesn't show agent managed PCs

Similar Messages

Maybe you are looking for