Open sales order with changed Division

Dear All ,
here we have one query :
material X , common in plant 1000 & 2000 .
in plant 1000 we have division 40 , created sales order and partially delivered , after partial deliver i have changed division to common 00,
now is it possible to deliver the remaining partial ?
Regards

Dear Venky
First of all you should be aware that if you change the Division in basic data 1 for plant 1000, it will change for plant 2000 also
Second, in order to do further delivery,
- Assign the division 40 to 00 in VOR2
- Assign the sales area in OVAZ (with cross division 00)
thanks
G. Lakshmipathi

Similar Messages

Change open sales order with new condition schema

Hi SD Experts,
I have to change condition type on condition schema. For example, now we have ZPVI (Discount %). I have to change with ZPFI (Discount %). But we have some open sales orders with old schema. Can I correct old sales orders with new condition schema? Is it possible?
Thank you.
Gulay Celik

>
Shai Sinai wrote:
> 3) The item categories of document items are assigned to billing plan types. This customization does create separate billing plan for each item, but the billing plans of item are refrenced to the header billing plan (according database field FPLA-RFPLN and screen field RV60F-KFREL), what means that item's values are not taken into consideration.
>
In this case it is obvious that it's not possible to have an item on the same document, which would have a billing plan different from the header. Unless, of course, you are ready to change the existing configuration or create a new item category, which would be independent from the header billing plan.
If, despite configuration, such entry is possible in VA41/VA42, then you'll have to use BDC instead of BAPI. Unfortunately, BAPIs do not have all the same functionality that might be available in the transaction.

Sales Order with diff. divisions.

Hi Gurus,
I have sales order with header division as 10
i am entering 3 material codes which belongs to divisions- 10,20,30.
it doesn't allow to enter 20& 30 to enter.
What Config. changes required ???
Reg,
Amol

Hi,
Please go to tcode VOV8 and enter your sales order type (For ex., ZOR) and under general control tab, there is an option "check division" Make it 0 or 1 as per your business requirement and try again.
Regards,
P Gomatheeswaran

SD report for the open sales orders with items

Hi,
Is there any standard SAP report which display open sales order togeather with the open items. I want to have columns target quantity, delivered quantity and open quantity.
Any tip?
BR
Saso

Dear Saso,
I think, instead using Report: VA05/ VA05N; its better to use Report: VL10C
In this report, you will get all the Sales Orders along with Materials - relevant for open delivery, along with Open Qty. and various other options can be selected from "Change Layout - (Ctrlt+F8)".
Best Regards,
Amit
Note: Don't maintain any Field-Entry (while executing the Report: VL10N; in order to list all Sales Orders. But, if you want to list Sales Orders based upon some criterias, maintain the Field-entries, as reqd.

Creating Query to show items from open sales orders with a/p invoice

Hi experts,
I am trying to create a query that will show what items/quantities are still in open sales orders that can now be filled by an incoming shipment of goods, processed through the a/p invoice.
This needs to be done using subqueries, which I have no experience with. I am trying to do this using the ORDR and RDR1 tables to show the open items from the sales orders and the OPOR and POR1 tables to show items just received in to inventory. I would like the query to show exactly the open item's, their quantities, the posting date from the sales order and the customer name that can now be filled from the new shipment through the a/p invoice.
I appreciate the assistance,
Hayden (on behalf of Todd)

Hello,
try this
SELECT T0.[DocDate], T1.[ItemCode], T1.[Dscription],( T1.[Quantity] - T1.[DelivrdQty]) As "Open Qty" FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[DocDueDate] <= [%0]And ( T1.[Quantity] - T1.[DelivrdQty]) != 0
Try this query in query manager.
Thanks
Manvendra Singh Niranjan
Edited by: Manvendra Singh Niranjan on Jul 13, 2011 6:27 AM

Query for all open sales order with a date range

Hi Experts!
I wrote this query that will look up all open sales order of a particular customer and how much was served:
SELECT T0.[DocNum] 'OS #', T0.[DocDate] 'Posting Date', T0.[CardName] 'Customer', T1.[Dscription] 'Item Description',T4.[SalUnitMsr] 'Sales UOM', T4.[InvntryUom] 'Invty UOM', T1.[UseBaseUn] 'Use of Invty UOM' , T1.[Quantity], T1.[Quantity]-T1.[OpenQty] 'Served Qty', T1.[OpenQty] 'Unserved Qty' FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.[DocStatus] = 'O' and T0.[CardName] =[%0]
However, I don't know how to input a parameter for the date range in a query. Can anyone help with this issue?
Your input will be highly appreciated.
Warm regards,
Jen

Hiiiiiii
Try This.....
SELECT T0.DocNum 'OS #', T0.DocDate 'Posting Date', T0.CardName 'Customer', T1.Dscription 'Item Description',T4.SalUnitMsr 'Sales UOM', T4.InvntryUom 'Invty UOM', T1.UseBaseUn 'Use of Invty UOM' , T1.Quantity, T1.Quantity, T1.OpenQty 'Served Qty', T1.OpenQty 'Unserved Qty' FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.DocStatus = 'O' and T0.CardName ='[%0]' and (T0.DocDate>='[%1]' and T0.DocDate<='[%2]')
Regards,

Close open sales order with no subsequest documents

Hi,
I have a scenario where line items in a sales order have been rejected citing a reason. But for two of these line item materials in a report are showing up as open with zero quantity (comes up as error in report). The quantity of all line items in the sales order is zero. These line item description column is complete.
how can this be corrected. how the sales orders can be made completed, without deleting line items.
Thanks
Sharan

Just a quick check,
do all items you rejected have been assigned the same reason for rejection.

SQL Queries for open sales orders with no invoice.

Hello all!
Is there a way to make a query to find out if there are any uninvoiced sales orders older than 5 days? I am having difficulty figuring out how the invoice is linked to the sales order.
I am more familiar with excel than SQL but I'm guessing it will be similar to the following:
SELECT * FROM ORDR WHERE today's date - posting date>5 AND (not sure what to check here for the invoice having been created)
**Note: my syntax is of course not exactly correct, this is just to give you an idea of what I'm looking for
Has anyone had to do this before or know how it would be done? It would be very useful for me.
Thanks!
Mike

Hi Mike
The document link is built on row level so the RDR1 should be used instead of ORDR to server your propose.
You could use this query to get all the lines do not link to a invoice.
*targettype 13 refers to target document invoice
select t0.docentry,t0.docdate,t0.linenum,t0.itemcode,t0.quantity,t0.price,t0.linetotal
from rdr1 t0 join ordr t1 on t0.docentry= t1.docentry
where t0.trgetentry is null and t0.DocDate < dateadd("d",-5, getdate()) and t1.docstatus = 'O'
or just use this query instead to find those lines do not link to any document
select t0.docentry,t0.docdate,t0.linenum,t0.itemcode,t0.quantity,t0.price,t0.linetotal
from rdr1 t0 join ordr t1 on t0.docentry= t1.docentry
where t0.targettype !='13' and t0.DocDate < dateadd("d",-5, getdate()) and t1.docstatus = 'O'
Please modify the code according to your needs.
Regards,
Syn Qin
SAP Business One Forums Team
Edited by: Syn Qin on Aug 11, 2008 5:20 AM

Assembly to order: change in sales order with change in Production order

I want to activate change in the sales order data when a production order(which is created w.r.t the sales order) data is changed (Strategy 82 used); I have de-activated "No Update" for the corresponding requirement class 201; also the material for which SO created ,is not a part of any Delivery group.
But when I am changing the production order (date/qty.), SO isn't getting updated accoringly.
Please tell me the reason why it isn't happening!!

Hi
The sales order requirement can be made as the production order receipt once you save the order in the system.
so it is possible to change the receipt according to the sales order reqmt if any changes made in the sales order,
in every entry or changes in the sales order ( if you use the stategy 82) . in back end system explode the BOM and the create the production order as per the order reqmt,
even while you do the changes mad in the sales and save that time sytem re explode the BOM once again and change the production order qty.
but if you change the production order , system not re run or explode the BOM , Routing . such setting is not made in the system . so obviously updation will not happen for the sales order .
Edited by: raj on Jun 9, 2009 11:22 AM

Open sales order report with billing date.

Hi,
I want to know if there's an available report for open sales order with billing date field.
Thank you.

Hi,
If your case is "Order-related" Billing,you can use the T.Code "VF04" for this purpose.
One more way is to go for a custom report.
Make a copy of code of the T.Code "VA05n"(Program Name is "SD_SALES_ORDERS_VIEW").
Change the code as per your requirement to display the field "Billing Date" in the report.
Check with your ABAPer if you wish to go for a custom report.
Regards,
Krishna.

Sales Order with item different division

Hi,
Is it possible to create a sale order with reference to contract with items which are referencing to different division?
That means i have a sales order with header division as 01 but i have 2 item with division 01 and 02.
Then to have the popup of the "open outline agreement" screen even if the contract division is different from the contract in the sales order?
Thanks.

Hi,
Go to VoV8 for pop up message u select Outling agrement and select the required one for ur requirment
On/off switch for messages about outline agreements
Procedure
    Set an indicator here if you want to receive a message informing you of
    open contracts when you create a sales document. Depending on the
    indicator you select, a search is carried out for open contracts in the
    sales document at the header level for the customer or at item level
    using the material number.
Use
    You can set the following indicators:
    o   No indicator: do not check
    o   A: check at header level
    o   B: check at item level
If u give me ur mail id i'll send along with the screen shots.
Regards,
Murthy

Mass update exchange rate type (not rate) in open sales orders

Hi all,
Our requirement is to update the exchange rate type at sales order header (VBAK-KURST) for all open sales orders with a new type created. (Z001). This field does not appear in MASS transaction for sales orders despite being present in the structure MASSSDHEAD.
This field cannot be located even in VA02 transaction (I am not sure if standard SAP masks or shows this field at header; I also can't find any transaction variants assigned).
Can anyone suggest how this field can be updated for sales orders either individually or in mass mode.
Regards,
KC
SAP SD

You are correct in indicating that Exchange rate type field is not seen in Header data of sales order. I checked screen layouts for various screens for sales order data and this field is not suppressed. The only reason could be that this field is not used in sales order screens
If you are interested, you could also check in the following way
1. Go to SE11, enter database table as VBAK
2. Once inside data dictionary table, click where used list button, select programs and screens and execute
3. click continue (don't select background)
4. now you would have list of programs and screens, this table is used
5. now start another session and go to transaction SE51
6. indicate program name as SAPMV45A and screen numbers as listed in step 4. you can check all screen numbers to see whether Exchange rate type field is listed in sales order layout.
7. Of particular interest would be screen number 4311 as this contains Financial accounting data & 4303 Billing data
8. you can check screen layout for screen 4311 & 4303. you would see Exchange rate type field is not indicated.
9. in case you could find this field in any screen, you could ask your ABAP consultant to add this field in the layout screen.
Hope this answers your question

Converting Open Sales Orders after MM data changes

Hello,
We are 'upgrading' a live v4.7 system to now use MRP. We have many open Contracts/Sales Orders with the affected materials. We are looking for a way to have SAP 'recalculate' or 'reload' the material master and VC data for these open orders without having to create new contracts/orders. There are absolutely no changes to the data entered into the contract/order. But because the orders were created with the old material master information they will not generate the MRP requirements unless we go into each order and cancel the line item and re-enter it into the order. This would be a significant amount of work to do either manually or writing a program to create new orders based on the existing orders.
Anyone know of a method or tool that will force SAP to reload the MM/VC config information into these existing open orders?
I would think this is a common issue for SAP upgrades where the new system turns on MRP.
Any help is greatly appreciated and good answers will get points.
John

hello, friend.
i will still research the subject. but the first thing that comes into my mind is t-code VA05. with this, you have the option to change the Plant en masse. so a possible workaround is for you to list a number of sales orders using VA05. you then sort the line items by Plant. choose all items with the same plant, change the plant via mass change... then change back to the original plant. hopefully, the new settings should apply.
do test a few sales orders by doing this for a larger scope.
regards.

Change of open sales order : using BAPI

Hi
   this is ravi
                  can any one help me on this topic
        1)change of open sales order using BAPI .With appropriate reason( like header level reason)
                   thanks & regards

hI,
    chk this FM BAPI_SALESORDER_PROXY_UPLOAD how the FM BAPI_SALESORDER_CHANGE was used
Check this code,
REPORT Z_SALES_ORDER_CHANGE
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65(0)
MESSAGE-ID ZZ.
TABLES: VBAP.
DATA:
V_FILEIN(90) TYPE C,
V_RECIN TYPE I,
V_RECVBAP TYPE I,
V_RECORDER TYPE I,
V_VBELN LIKE VBAP-VBELN,
ORDERHEADERINX LIKE BAPISDH1X.
DATA: BEGIN OF I_ORDERS OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
BRGEW(18) TYPE C,
VOLUM(18) TYPE C,
END OF I_ORDERS.
DATA: BEGIN OF I_OUTPUT OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
GEWEI LIKE VBAP-GEWEI,
BRGEW LIKE VBAP-BRGEW,
VOLUM LIKE VBAP-VOLUM,
CKWGT TYPE C,
CKVOL TYPE C,
END OF I_OUTPUT.
DATA: BEGIN OF ORDERITEMIN OCCURS 0.
INCLUDE STRUCTURE BAPISDITM.
DATA: END OF ORDERITEMIN.
DATA: BEGIN OF ORDERITEMINX OCCURS 0.
INCLUDE STRUCTURE BAPISDITMX.
DATA: END OF ORDERITEMINX.
DATA: BEGIN OF RETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF RETURN.
DATA: BEGIN OF BAPIRETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF BAPIRETURN.
PARAMETERS:
P_PATH(45) TYPE C DEFAULT '/usr/users/ftpsapom/' LOWER CASE,
P_FNAME(32) TYPE C DEFAULT '/sweetjo.txt' LOWER CASE.
START-OF-SELECTION.
CONCATENATE PATH AND FILE NAME INTO ONE VARIABLE
CONCATENATE P_PATH P_FNAME INTO V_FILEIN.
OPEN DATASET
IF V_FILEIN IS INITIAL.
MESSAGE E002 WITH 'FILE' V_FILEIN 'DOES NOT CONTAIN ANY DATA!'.
ELSE.
OPEN DATASET V_FILEIN
FOR INPUT
IN TEXT MODE.
IF SY-SUBRC = 0.
READ DATASET
DO.
READ DATASET V_FILEIN INTO I_ORDERS.
IF SY-SUBRC = 0.
APPEND I_ORDERS.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET
CLOSE DATASET V_FILEIN.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'ERROR - CLOSING' V_FILEIN.
ENDIF.
ELSE.
MESSAGE E002 WITH 'ERROR - COULD NOT OPEN' V_FILEIN.
ENDIF.
ENDIF.
SORT AND REMOVE DUPLICATES FROM I_ORDERS
SORT I_ORDERS BY VBELN POSNR.
DELETE ADJACENT DUPLICATES FROM I_ORDERS.
POPULATE I_OUTPUT
LOOP AT I_ORDERS.
SHIFT I_ORDERS-POSNR LEFT DELETING LEADING SPACE.
CONCATENATE '0' I_ORDERS-POSNR INTO I_ORDERS-POSNR.
SELECT SINGLE BRGEW VOLUM
FROM VBAP
INTO (VBAP-BRGEW, VBAP-VOLUM)
WHERE VBELN = I_ORDERS-VBELN
AND POSNR = I_ORDERS-POSNR.
IF SY-SUBRC = 0.
IF VBAP-BRGEW = 0.
I_OUTPUT-CKWGT = 'X'.
ENDIF.
IF VBAP-VOLUM = 0.
I_OUTPUT-CKVOL = 'X'.
ENDIF.
I_OUTPUT-VBELN = I_ORDERS-VBELN.
I_OUTPUT-POSNR = I_ORDERS-POSNR.
I_OUTPUT-GEWEI = 'ST'.
I_OUTPUT-BRGEW = I_ORDERS-BRGEW.
I_OUTPUT-VOLUM = I_ORDERS-VOLUM.
APPEND I_OUTPUT.
CLEAR: I_OUTPUT.
ENDIF.
V_RECIN = V_RECIN + 1.
ENDLOOP.
POPULATE BAPI DATA AND RUN BAPI
CLEAR: ORDERHEADERINX, ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ORDERHEADERINX-UPDATEFLAG = 'U'.
LOOP AT I_OUTPUT WHERE CKWGT = 'X' OR CKVOL = 'X'.
V_RECVBAP = V_RECVBAP + 1.
IF I_OUTPUT-VBELN <> V_VBELN AND SY-TABIX <> 1.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
CLEAR: ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ENDIF.
ORDERITEMIN-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMIN-UNTOF_WGHT = I_OUTPUT-GEWEI.
IF NOT I_OUTPUT-CKWGT IS INITIAL.
ORDERITEMIN-GROSS_WGHT = I_OUTPUT-BRGEW.
ORDERITEMINX-GROSS_WGHT = 'X'.
ENDIF.
IF NOT I_OUTPUT-CKVOL IS INITIAL.
ORDERITEMIN-VOLUME = I_OUTPUT-VOLUM.
ORDERITEMINX-VOLUME = 'X'.
ENDIF.
APPEND ORDERITEMIN.
ORDERITEMINX-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMINX-UNTOF_WGHT = 'X'.
ORDERITEMINX-UPDATEFLAG = 'U'.
APPEND ORDERITEMINX.
V_VBELN = I_OUTPUT-VBELN.
ENDLOOP.
RUN BAPI ON LAST ORDER
IF NOT ORDERITEMIN IS INITIAL.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
ENDIF.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT FROM FILE ', V_RECIN.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF LINES TO CHANGE ', V_RECVBAP.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF ORDERS TO CHANGE ', V_RECORDER.
SKIP.
TOP OF PAGE
TOP-OF-PAGE.
WRITE:/1(5) TEXT-H01, 6(8) SY-DATUM MM/DD/YY,
100(8) TEXT-H02, 126(8) SY-PAGNO.
WRITE:/1(5) TEXT-H03, 6(8) SY-UZEIT USING EDIT MASK '__:__:__',
20(77) TEXT-H04,
100(8) TEXT-H05, 108(25) SY-REPID.
WRITE:/1(6) TEXT-H06, 8(12) SY-UNAME,
20(4) TEXT-H07, 25(32) SY-HOST,
100(13) TEXT-H08, 121(8) SY-SYSID,
129 '/', 130(3) SY-MANDT.
ULINE.
SKIP
<b>Reward points</b>
Regards

Restrict manual change in sales order with respect to quotation

Hi All,
The user use to create sales order with respect to quotation. The user can able to change pricing as well as some header and item fields. How can I restrict user for manual change in sales order expect some specific fields.
Thanks.

Hi Sunil,
It is possible through configuration better you can post in sd forums.
For the condition type settings , ensure that the manual entries is 'D'. it wont allow any changes in the order.
Regards,
Madhu.
Edited by: madhurao123 on Aug 1, 2011 1:08 PM

Open sales order with changed Division

Similar Messages

Maybe you are looking for