Change open sales order with new condition schema

Hi SD Experts,
I have to change condition type on condition schema. For example, now we have ZPVI (Discount %). I have to change with ZPFI (Discount %). But we have some open sales orders with old schema. Can I correct old sales orders with new condition schema? Is it possible?
Thank you.
Gulay Celik

>
Shai Sinai wrote:
> 3) The item categories of document items are assigned to billing plan types. This customization does create separate billing plan for each item, but the billing plans of item are refrenced to the header billing plan (according database field FPLA-RFPLN and screen field RV60F-KFREL), what means that item's values are not taken into consideration.
>
In this case it is obvious that it's not possible to have an item on the same document, which would have a billing plan different from the header. Unless, of course, you are ready to change the existing configuration or create a new item category, which would be independent from the header billing plan.
If, despite configuration, such entry is possible in VA41/VA42, then you'll have to use BDC instead of BAPI. Unfortunately, BAPIs do not have all the same functionality that might be available in the transaction.

Similar Messages

All changes in sales orders with in a week

Hi gurus,
I want to display a report to display all the changes in sales orders with in a week,
Can anybody help me .If anybody already developed this report can you send to me.
regards,
D..

Query table CDHDR and CDPOS with the following fields:
CDHDR-TCODE = VA01 or VA02
CDHDR-UDATE = <specified date range>
Now select from CDPOS where
CDPOS-OBJECTCLAS = CDHDR-OBJECTCLAS
CDPOS-OBJECTID = CDHDR-OBJECTID
CDPOS-CHANGENR = CDHDR-CHANGENR
The rest of the details for the change can be found from the other fields in CDPOS. like tablename, fieldname, old value, new value etc.
Hope this helps.
Sudha

SD report for the open sales orders with items

Hi,
Is there any standard SAP report which display open sales order togeather with the open items. I want to have columns target quantity, delivered quantity and open quantity.
Any tip?
BR
Saso

Dear Saso,
I think, instead using Report: VA05/ VA05N; its better to use Report: VL10C
In this report, you will get all the Sales Orders along with Materials - relevant for open delivery, along with Open Qty. and various other options can be selected from "Change Layout - (Ctrlt+F8)".
Best Regards,
Amit
Note: Don't maintain any Field-Entry (while executing the Report: VL10N; in order to list all Sales Orders. But, if you want to list Sales Orders based upon some criterias, maintain the Field-entries, as reqd.

Restrict manual change in sales order with respect to quotation

Hi All,
The user use to create sales order with respect to quotation. The user can able to change pricing as well as some header and item fields. How can I restrict user for manual change in sales order expect some specific fields.
Thanks.

Hi Sunil,
It is possible through configuration better you can post in sd forums.
For the condition type settings , ensure that the manual entries is 'D'. it wont allow any changes in the order.
Regards,
Madhu.
Edited by: madhurao123 on Aug 1, 2011 1:08 PM

Creating Query to show items from open sales orders with a/p invoice

Hi experts,
I am trying to create a query that will show what items/quantities are still in open sales orders that can now be filled by an incoming shipment of goods, processed through the a/p invoice.
This needs to be done using subqueries, which I have no experience with. I am trying to do this using the ORDR and RDR1 tables to show the open items from the sales orders and the OPOR and POR1 tables to show items just received in to inventory. I would like the query to show exactly the open item's, their quantities, the posting date from the sales order and the customer name that can now be filled from the new shipment through the a/p invoice.
I appreciate the assistance,
Hayden (on behalf of Todd)

Hello,
try this
SELECT T0.[DocDate], T1.[ItemCode], T1.[Dscription],( T1.[Quantity] - T1.[DelivrdQty]) As "Open Qty" FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[DocDueDate] <= [%0]And ( T1.[Quantity] - T1.[DelivrdQty]) != 0
Try this query in query manager.
Thanks
Manvendra Singh Niranjan
Edited by: Manvendra Singh Niranjan on Jul 13, 2011 6:27 AM

Query for all open sales order with a date range

Hi Experts!
I wrote this query that will look up all open sales order of a particular customer and how much was served:
SELECT T0.[DocNum] 'OS #', T0.[DocDate] 'Posting Date', T0.[CardName] 'Customer', T1.[Dscription] 'Item Description',T4.[SalUnitMsr] 'Sales UOM', T4.[InvntryUom] 'Invty UOM', T1.[UseBaseUn] 'Use of Invty UOM' , T1.[Quantity], T1.[Quantity]-T1.[OpenQty] 'Served Qty', T1.[OpenQty] 'Unserved Qty' FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.[DocStatus] = 'O' and T0.[CardName] =[%0]
However, I don't know how to input a parameter for the date range in a query. Can anyone help with this issue?
Your input will be highly appreciated.
Warm regards,
Jen

Hiiiiiii
Try This.....
SELECT T0.DocNum 'OS #', T0.DocDate 'Posting Date', T0.CardName 'Customer', T1.Dscription 'Item Description',T4.SalUnitMsr 'Sales UOM', T4.InvntryUom 'Invty UOM', T1.UseBaseUn 'Use of Invty UOM' , T1.Quantity, T1.Quantity, T1.OpenQty 'Served Qty', T1.OpenQty 'Unserved Qty' FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCTG T2 ON T0.GroupNum = T2.GroupNum INNER JOIN OSLP T3 ON T0.SlpCode = T3.SlpCode INNER JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE T0.DocStatus = 'O' and T0.CardName ='[%0]' and (T0.DocDate>='[%1]' and T0.DocDate<='[%2]')
Regards,

Open sales order with changed Division

Dear All ,
here we have one query :
material X , common in plant 1000 & 2000 .
in plant 1000 we have division 40 , created sales order and partially delivered , after partial deliver i have changed division to common 00,
now is it possible to deliver the remaining partial ?
Regards

Dear Venky
First of all you should be aware that if you change the Division in basic data 1 for plant 1000, it will change for plant 2000 also
Second, in order to do further delivery,
- Assign the division 40 to 00 in VOR2
- Assign the sales area in OVAZ (with cross division 00)
thanks
G. Lakshmipathi

Problem in Sales Order with specific condition type.

Hello Experts,
I'm facing a problem in sales order creation for a specific condition type.
the actual scenario is as below,
We have created a new condition type for special discount.This condtion type is applicable only for specific sales channels.Also the discount percentage has to fetched from a custom table.
To achieve this I've written a user exit "RV64A999"
In the FM, i've calculated the subtotal and fetched the discount percentage and calculated the discount amount. After implementing this, the SO were been created properly. for all the line items the discount amount was getting calculated properly.
But then I added a condition at the top of code in exit that the calculation for the new condition type should happen only for selected sales channels.
But after adding this condition in code, i'm facing problem. Now when I create/ change any SO, the discount amounts are getting calculated incorrectly. I'm getting discount amount even if the line item subtotal amount is zero (0).
Any help or pointers reagrding this issue will be very helpful and highly appreciated.

Hi ..
Check your config. again or debug the routine code with your ABAPer and find the problem area.
-Maharshi

Close open sales order with no subsequest documents

Hi,
I have a scenario where line items in a sales order have been rejected citing a reason. But for two of these line item materials in a report are showing up as open with zero quantity (comes up as error in report). The quantity of all line items in the sales order is zero. These line item description column is complete.
how can this be corrected. how the sales orders can be made completed, without deleting line items.
Thanks
Sharan

Just a quick check,
do all items you rejected have been assigned the same reason for rejection.

Profit center derivation in sales order with New GL

Dear Gurus,
We are using the New GL, so EC-PCA is not activated.
We would like to set-up a substitution rule in order to derive the profit center in the sales order and customer invoice (we don't want the profit center to always be derived from the costing view of the material master data).
I created a substitution rule with transaction 0KEM and assigned it to the controlling area with active status"3" (Other transactions + cross-company (orders + billing doc.)).
Unfortunately, it doesn't seem to be called when I create a sales order.
Can you please confirm gthat 0KEM is the transaction to use even when we use New GL without EC-PCA?
Where should I put a breakpoint in order to trace the call to the substitution rule?
Thanks a lot in advance for your help.
Regards,
Simo

Dear Gurus,
We are using the New GL, so EC-PCA is not activated.
We would like to set-up a substitution rule in order to derive the profit center in the sales order and customer invoice (we don't want the profit center to always be derived from the costing view of the material master data).
I created a substitution rule with transaction 0KEM and assigned it to the controlling area with active status"3" (Other transactions + cross-company (orders + billing doc.)).
Unfortunately, it doesn't seem to be called when I create a sales order.
Can you please confirm gthat 0KEM is the transaction to use even when we use New GL without EC-PCA?
Where should I put a breakpoint in order to trace the call to the substitution rule?
Thanks a lot in advance for your help.
Regards,
Simo

Opening sales order in new browser window

hi experts,
i have ALV table in which one of the columns is sales order number. I made the column as hyperlink so that user can click on it. when the user clicks on this i am calling an event handler method which is linked on_click event of the ALV interface controller . i am able to capture the sales order number in the method. Now i want to call va03 transaction for this sales order in a new browser window. we are going to integrate this application in portal. any ideas?. i heard something about the object based navigation. how to do this?
thanks
Edited by: sudhakar murthy on May 12, 2010 6:04 PM

Hi Sudhakar,
Check out the below code to open a Transaction from WD in an external window and pass the value in that Transaction. I am passing the value here in the VF03 transaction's Billing document screen field .
DATA: url TYPE string,
        host TYPE string,
        port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
CONCATENATE host ':' port
'/sap/bc/gui/sap/its/webgui/?~transaction='
'*VF03 VBRK-VBELN=123456' " 123456 is the value you are passing into the Billing document screen field of the
   INTO url.                                      "VF03   transaction
*get the window manager as we are opening t code in external window
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Hope it helps you...

SQL Queries for open sales orders with no invoice.

Hello all!
Is there a way to make a query to find out if there are any uninvoiced sales orders older than 5 days? I am having difficulty figuring out how the invoice is linked to the sales order.
I am more familiar with excel than SQL but I'm guessing it will be similar to the following:
SELECT * FROM ORDR WHERE today's date - posting date>5 AND (not sure what to check here for the invoice having been created)
**Note: my syntax is of course not exactly correct, this is just to give you an idea of what I'm looking for
Has anyone had to do this before or know how it would be done? It would be very useful for me.
Thanks!
Mike

Hi Mike
The document link is built on row level so the RDR1 should be used instead of ORDR to server your propose.
You could use this query to get all the lines do not link to a invoice.
*targettype 13 refers to target document invoice
select t0.docentry,t0.docdate,t0.linenum,t0.itemcode,t0.quantity,t0.price,t0.linetotal
from rdr1 t0 join ordr t1 on t0.docentry= t1.docentry
where t0.trgetentry is null and t0.DocDate < dateadd("d",-5, getdate()) and t1.docstatus = 'O'
or just use this query instead to find those lines do not link to any document
select t0.docentry,t0.docdate,t0.linenum,t0.itemcode,t0.quantity,t0.price,t0.linetotal
from rdr1 t0 join ordr t1 on t0.docentry= t1.docentry
where t0.targettype !='13' and t0.DocDate < dateadd("d",-5, getdate()) and t1.docstatus = 'O'
Please modify the code according to your needs.
Regards,
Syn Qin
SAP Business One Forums Team
Edited by: Syn Qin on Aug 11, 2008 5:20 AM

Assembly to order: change in sales order with change in Production order

I want to activate change in the sales order data when a production order(which is created w.r.t the sales order) data is changed (Strategy 82 used); I have de-activated "No Update" for the corresponding requirement class 201; also the material for which SO created ,is not a part of any Delivery group.
But when I am changing the production order (date/qty.), SO isn't getting updated accoringly.
Please tell me the reason why it isn't happening!!

Hi
The sales order requirement can be made as the production order receipt once you save the order in the system.
so it is possible to change the receipt according to the sales order reqmt if any changes made in the sales order,
in every entry or changes in the sales order ( if you use the stategy 82) . in back end system explode the BOM and the create the production order as per the order reqmt,
even while you do the changes mad in the sales and save that time sytem re explode the BOM once again and change the production order qty.
but if you change the production order , system not re run or explode the BOM , Routing . such setting is not made in the system . so obviously updation will not happen for the sales order .
Edited by: raj on Jun 9, 2009 11:22 AM

How to make Sales Order with this condition

Condition is as follows
I have already sold an item say A to customer at Rs 30 lacs, INR. Now a new upgrade has been released say B costing Rs 50 lacs, INR. Now how to book Item B, with return of item A, and charge the customer who has already bought item A, only the differential amount, ie Rs 20 Lacs INR (Rs 50-30 Lacs, INR)
Come back guys quickly.
Regards
Adarsh Krishna

Hi Adarsh,
Is this the new revision of Item A? then you can follow retrobilling. If this is a new item, then you have to book a new order and adjust the invoice.
Steps for retrobilling:
1) enable the retrobilling parameters in the system parameters
2) Change the price list of the item A in the price list to the new price.
3) go to retrobill workbench, reference the old order i.e shipped and you get a new order booked, now you can go and change the item here in the lines.
You can receive the item A back through RMA.
Pl try it out and let me know.
Regards,
Prasad

Open sales order report with billing date.

Hi,
I want to know if there's an available report for open sales order with billing date field.
Thank you.

Hi,
If your case is "Order-related" Billing,you can use the T.Code "VF04" for this purpose.
One more way is to go for a custom report.
Make a copy of code of the T.Code "VA05n"(Program Name is "SD_SALES_ORDERS_VIEW").
Change the code as per your requirement to display the field "Billing Date" in the report.
Check with your ABAPer if you wish to go for a custom report.
Regards,
Krishna.

Change open sales order with new condition schema

Similar Messages

Maybe you are looking for