Open Transfer Requirements - Fixed Bin replenishment

We have a situation where TR's remiained open for lack of stock in source Storage types. When these Tr's are closed as completed, they re-appear due to min/max. It is being cumbersome to check each TR if this was due to LP21 or a genuine TR. could some one advise how to get around this issue. Mov type 319 is configured to ctrate TO from TR autommatically.
appreciate any help on this.
thanks

What is a "genuine" TR?
One idea:
When listing TRs in LB10 you can see the movement type. For fix bin replenishment you can define which movement type should be used by system. Based on this you can distinguish between replenishment related TRs and other TRs.

Similar Messages

RE: Auto-closed all open Transfer requirements

User sometimes uses LT10 to move stock from Receiving area to bin.
Because of this, there are many open Transfer requirement.
Is there a way the system will closed off the transfer requirement?
In which User exit can this routine be setup?
Thanks
bye

One way of doing this is by marking open transfer requirements as completed in transaction LL01 (warehouse activity monitor).
To run the warehouse activity monitor, you will have to define the variants in customizing.
When you get this report running, double click on the line for 'Open Transfer Requirements'. In the next screen, click on the button 'TR status deliv. completed.'
Another was is to do this individually in transaction LB02.
To my knowledge, there is no user exit to automate this. Perhaps you can write a custom BDC on LL01 transaction and run the program on regular intervals (PS this way you may end up closing genuine or un-processed Transfer Requirements as well!)
Regards
Baseer

Procedure for Clearing Open Transfer Requirements & Posting Changes

Dear All,
With my present SAP System, both IM & WM Stocks are zero for a given Sales Order / Line item. But there are pending Transfer requirements & Posting changes due to the fact that the users have not completed up until the TO Confirmation Stage. Now that the stocks are in harmony in both IM & WM, what do we do to the open transfer requirements and posting changes. What is the best practice procedure for the above scenario.
Appreciate an advice for the above scenario
Thanks
Shabeen Buhary

Hello,
Write a program which will call transaction LB02 for TR & LU02 for Posting change notice (PCN).This program will make status of these TR & PCN complete.
I already used the same.
Regards
Prashant

Sap wms fixed bin replenishment

hi experts,
i am creating fixed bin replenishment the max bin qty 40, min 10 and replenishment qty 50
and i try to create LP21   fil the fields the whno storage type and bin and executed but the replenishment is not happened . the automatic TR also not triggering so plz tell me where is the setting we need

Hi,
As you have mentioned :
Replenishment qty to 10
and the max bin qty is 40
min bin qty is 10
available stock is 40
System will still not generate any TR since your available qty is not less than min bin qty.
Reduce your available bin qty less than 10 then only it will generate TR.
Or keep min qty as 100 , Max qty as 1000 and replenishment qty as 100 and then check.
Please read the Program documentation for LP21 ( Blue icon on lp21 input screen) for calculation .
Minimum stock     =   10
Maximum stock     = 100
Replenishment qty =   40
Storage bin stock =    5
Since the storage bin stock has fallen below the minimum stock level defined in the material master, the system calculates a quantity to be supplied to this storage bin. The system attempts to increase the total quantity in the bin (5) by multiplying the replenishment quantity (40) as many times as possible to match the maximum quantity defined for the bin (100) without exceeding it. For the supply quantity, the system calculates 80 pieces (5 + 2 x 40 = 85 < 100).
Regards,
Shailesh

List of Open Transfer Requirement(TR)

Hi all
I want to know about report : List of Open Transfer Requirement(TR). Where i have to get the details. ie. Which table i have to get it? Can any one explain that reports briefly? Any Standrad T.code is there ?

Hi Muthu,
You can use LB10 standard transaction to get the list of open TRs. You can start to process them in this transaction.
TR-tables: LTBK (header), LTBP (item) - you can use LTBK-STAU to sort out cmpleted&partially processed TRs.
BR
Csaba

List of Open Transfer Requirement(TR) - Reg

Hi all
I want to know about report : List of Open Transfer Requirement(TR). Where i have to get the details. ie. Which table i have to get it? Can any one explain that reports briefly? Any Standrad T.code is there ?

activate the warehous activity monitor t-code LL01. see help.sap.com for details on the how-to.

Open Transfer Requirements for Mvmt 261 in LL01

Hi all
We recently made a change to our warehouse structure by reassigning storage types from an earlier storage location A to a storage location B. These storage types involve Production Supply areas (PSAs) and also storage areas for raw materials.
After the change we have ended up with roughly 2000 open transfer requirements related to movement type 261 GI to order. They all show up as critical processes in LL01 (Warehouse Activity Monitor)
Does anyone know what could be the reason
Thanks a lot

Before you change your structure of wharehouse you need to clean up all the pending document otherwise you will be in trouble like you have now.
so please clear all the document first.

One t.o. fixed bin replenishment

Hello, and good day
I have a question about replenishing fixed bins. We currenty use two step with TR-TO mirror TR-TO creation automated via batch job and it's working fine. The issue is that the replenishments are slowed to much waiting for the second t.o. that brings the stock to the fixed picking bin.
My question: is one step replenishment a standard SAP function and please guide me on the steps to implement if so.
Or provide me with any links or documentation on the process please, So far I have only been able to find info on the two step process, I have only seen some posts mentioning movement 320 for this but it wasn't clear to me if there where specificaly refering to a one step replenishment.
When I say one step I mean to say only one transfer order - source = genaral storage - destination = fixed bin
user in genaral storage can view the t.o. for source bin and do the physical move then another user access the same t.o. and confirm when the stock is placed into the fixed bin, so in practice it's still a two step but in the system user only needs one t.o.
we have WM active obv

Hi
Reason for error message "LP301- no material relevant for stock replenishment found" is because the below statement fails to find the record from table MLGT on the set criteria, Looks like there is a mismatch in the LP21 selection entry screen (Plant, warehouse , fixed bin storage type, requirement number, requirement type) and master data which you defined. check the entry on the selection screen
or the another way to check is goto SE11 enter table MLGT
on the selection screen pass the warehouse number, Pickface storage type(005) and execute, check whether system is giving you any result or not
Make sure the material is extended for pick face storage type
fixed bin is defined in the material master WM2 view, the bin should be from pickface storage type 005

SAP WM-Fixed bin replenishment

Hi
While run replenishmnet for the fixed bin through LP21 ,system is generating individual Transfer orders for each Storage Bins.How to generate to single Transfer Order for all the bins selected in LP21.
Most urgent pls help
Regards
alagukumaran

Hi Aktar
Thanks for the reply
For the stoarge type if the user selects some 100 fixed storage bins to be replenished from the another storage bins ,currently system triggers 100 Transfer requirenment and will go to LB10 to convert TR to TO.
Need to generate one TO ,having replenishment details of all 100 fixed bins through LP21 ,How to proceed .kindly help me.
Regards
Kumar

Client Specific Requirement Fixed bin storage type

Hi There is one requirement if anybody can help,
A company has fixed bin storage for a particular material, But they keep that Material in PC(Pieces) as well as in Boxes( say 1bx= 5pc) But they want to keep the pieces in a one fixed bin (say 1) and the boxes in a another different fixed bin(say 2), though the material is same.
So that when a transfer order is made for material in pieces it automatically refers to bin1 and if it is made for material in boxes it refers to bin 2.
Please any body help me and let me know how can we configure this. If you have any specific files please mail at
[email protected]
Thanks

Hello Harsimram,
Why you can not ask?
When the thing is not logically possible then there is always "Change Management"
Regarding the Requirement, We can not use user-exit with fix bin strategy so that option is also out of scop.
Regards
Arif Mansuri

Fixed Bin Replenishment based on Available Quantity

Hi Friends,
Can anyone please answer to this query.
System calculates the replenishment qty based on the available qty in the bin (961 pce available in the bin, max bin qty is 1000 pce, min bin qty is 970 so the requested qty is 1000-961=39 pce). We would like to calculate the replenishment qty based on the total qty in the bin, so 972 pce (Aval qty + Picking qty = 961+11 =972). In this case the replen qty would be 1000-972=28 pce. If the repenishment is made before the physical execution of the picking, the bin will be overloaded.
Is it possible to take into consideration at the replenishment only the total stock and not the available stock?
Thanks in advance.
Regards,
Praveen

Hi,
Thank you for your response.
I know system calculates the replenshiment based on min and max qty. But if the job runs before the physical move of the material for the picking TO how that situation can be controlled. Because once the TO is created for picking stock will be shown in total qty instead of available qty. so system consider available qty for replenishmnet calculation and it turns into overflow.
Please let me know is there any way we can control this confusion.
Thanks,
Praveen

Close open Transfer Requirements

Hi
Transfer Rquirements created for outbound delivery Transfer Order due to wrong configuration in the IMWM movement type. now we modified the config but the open TR's are there. how to delete the open TR's in a mass way because we have lot.
Thanks in advance.
Chandra.

There's no standard way of mass deleting the TR's, but there's a mass way to mark open TR's as fully processed/complete and therefore, will not appear as open.
You can use Warehouse activity monitor - LL01 (provided '02' open TR object is activated for the Warehouse) to mark open TRs as 'TR status delivery complete', in mass. By doing so, the TR's will no longer appear to be open.

Automatic Replenishment for Fixed Bins

Hi,
We have successfully implemented Automatic Replenishment for our Fixed Bins when Picking Transfer Order is Confirmed. We have used the scenario where full stock removal (a palletized quantity) is removed from the source bin and only the Replenishment quantity is placed in the destination bin with the difference quantity placed into a Return bin in a consolidation storage type. This is accomplished in a single Transfer Order. We use RF Scanning to confirm the Fixed Bin Replenishment.
Our problem now is the following:
There is no positive instruction that the full quantity must be removed from the Source bin and the remainder quantity placed into the Return bin.
Question:
Can the Replenishment Transfer Order be split automatically into two. One to Replenish the Fixed Bin and the other to move the remainder to the Return bin.
Our SAP system is: SAP R/3 Enterprise 4.7
Thanks and regards,
Mike

Hi,
Thank you for your prompt reply. Through all my investigation you have confirmed the conclusion that I suspected. Thank you.
Is there possibly a different solution? Is there a User Exit or Function Module that can be called/used to create another TO while creating the automatic replenishment TO? We could then use this separately to move the stock to the consolidation area.
Thanks,
Mike

WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

Urgent :--------- Transfer Requirement creating for the delivery

Hi Gurus,
For a Delivery document Transfer Requirement and as well as Transfer Order is creating,
Based on Transfer Order picking was happening in the WMu2026 the PGI for the delivery and Billing properly is happening.
But Open Transfer Requirements are laying for each delivery document, here source is respective storage type and bins and destination storage type 916 and bin is delivery number.
Please suggest me how the it is happening where we did configuration mistake.
Regards
madhu

Hi,
I think you set TR creation indicator for IM mvt 601 (reference mvt) under SPRO > LE > WM > Interfaces > IM > Define Movement Types - LE-WM interface....
Please check it. If it is set delete it.
BR
Csaba

Open Transfer Requirements - Fixed Bin replenishment

Similar Messages

Maybe you are looking for