Opening Balance in FBL3N

Hello Friends,
I want to see only closing balance of last year transactions and transaction figures of this year  if i run report for this year.
e.g.GL.NO.11000010 has balance in the year 2009 and 2010. if i execute the report for 2010, report should display balance for last year transactions and line item transactions for this year.
Anyone please help on this.
is it possible through layout changes or any additional configurations needed.
Rgds
Swapna

Hi,
You will need to do a deelopment.
You can use the following BAPIs for extracting the balaces.
BAPI_GL_GETGLACCBALANCE                       Closing balance of G/L account for chosen year
BAPI_GL_GETGLACCCURRENTBALANCE       Closing balance of G/L account for current year
BAPI_GL_GETGLACCPERIODBALANCES        Posting period balances for each G/L account
Regards,
Amit

Similar Messages

  • GR/IR account showing open balance in FBL3N

    Hi All,
    There are no open GRN for booking still there is difference of amount in FBL3N.
    what could be the reason for showing open line item in fbl3n?
    Thanks
    chinna

    Hi Atif,
    Thanks for your detailed analysis& for your help in these days
    Please find below example:
    The PO quantity 250*155 -usd=38750 USD
    GRN-38750.00 -usd
    MIRO-1,738,529.42 -INR
    The GRN and MIRO and condition types all are booked 250 quantity, there is no pending to book however the GR/IR account t.code FBL3N is showing open balances.
    As your said F.13 is pending?
    Thanks
    Chinna

  • Reqd customized report  to display  opening balance in fbl3n

    HI experts ,
    As u know in FBL3N we wont get the closing balance of till previous day as the opening balance of present day.
    we can get the closing balances by giving periods .BUT actually accounts people's in our company need is ,Display  of opening balance at the top of the page while doing the today transactions .
    Actually I suggested them FBCJ (cash journal)  is the good one to use but they are saying that they can't use this transaction in between the economical year behalf of FBL3N , they are saying that they will face numbering range problems.
    SO CAN ANY ONE HELP ME
    advance thnks

    Moderator message - Welcome to SCN.
    but
    Moderator message - Please do not cross post- thread locked
    Rob

  • Opening and Closing balance in FBL3N?

    Hi All,
    In other ERP systems, if you browse GL Account, i.e. FBL3N in SAP, you get the list of documents within specified period but in other systems you also get the OPENING balance as well as CLOSING balance and the current postings are in between them. Is there any standard report or report painter is to be used for such requirement.
    Balances can be checked through FS10N and S_ALR_87012301 etc. but requirement is to get the list of documents with opening and closing balance in beginning and end of the report. The best example is of Cash Journal (Txn FBCJ)
    Thanks

    Thank you Will,
    Yes, actually if other system provide such functionality then SAP should be providing that. I searched within table TSTC for such transaction but unable to get. Accountants requirement is when they execute FBL3N within specified period, the cummulative opening balance and closing balance should be provided with report.
    Thanks for your answer!
    Regards,
    Nayab

  • Fbl3n  heading we need to adde opening balance  and date

    Hi guru's
    My requirement is adding fields opening balance and date in fbl3n (g/l account line item display)
    please guide  me.

    Hi,
    Use Business Transaction Events(Tcode FIBF) to populate custom fields in FBL*N transactions.
    Regards,
    Madhu

  • REGARDING OPENING BALANCE AND CLOSING BALANCE

    Hi, All
    After executing the TCode - FBL3N, we get the details list. There we also need to display the OPENING BALANCE AND CLOSING BALANCE according to G/L Account and Company Code.

    Hi
    For opening balance, please use transaction F.01.
    Then go to special evaluations and choose balance sheet type 4 (opening balance)
    Kind regards
    JeVe

  • Opening Balance to be displayed along with line items

    Dear Experts,
    Is there any way to display Opening Balance for a particular GL along with LIne Items. FS10N only provides Period wise opening balance and line items. If I have to select the line items for a GL in the middle of the period and see the opening balance, how is it possible. In FBL3N i am able to see only line items and no opening balance.
    Any suggestions.......................
    Raj.

    Hello,
    FS10N you will see the balance and then double click on that to see line item. Again at line items you will not see the opening balance. There is no such facility.
    If you want period wise balances, then go with
    S_ALR_87012172 report.
    Regards,
    Ravi

  • G/L Account Opening Balance

    Please help me to find the Opening Balance of  G/L Account on the specified day.
    means Input is G/L Account :1312000001
                           Date              12.04.2008
    so i need to fetch the Opening Balance of the 12.04.2008.
    guide me to fetch the same.
    Regards
    PBN

    hi,
    FBL3n is one of the standard report suits your requirement..
    Reward if find useful

  • Difference between the balance in FBL3N and FS10n

    Hi Sapians,
          There is a difference between the balance in FBL3N and FS10n. There are no recent changes made in the GL master data. Also there is a difference between the debit and credit balances of FS10N and table GLT0.
    Please advice.
    Ashwin

    Go through following notes:
    FI-GL-GL-D     970096     FS10N: Drilldown -> differences with active new G/L     
    FI-GL-GL-D     1609283     FS10N: Drill-Down leads to differences with active splitting     
    FI-GL-GL-D     1021174     FS10N: Drilldown -> differences despite Note 970096     
    FI-AR-AR-D     327139     Balance display FI: drilldown perfrmnce for balncs     
    FI-AR-AR-D     716640     Balance display: Drilldown: Total of open items <> balance

  • Trail Balance opening balances are not matching with previous FY clsng baln

    Hi,
    We have done GL Balances carry forward to 2009 F.Y, here GL code 1042600002 carry forwarded with 'Zero' balance and we have run the Trail balance sheet as on 31.03.2009 in T.Code ALR87012310
    Here also it is showing Zero balance for respective GL.But when we run Trail balance as on 30.04.2009 with Fiscal year 2009 for 1st period the system is showing beganing balance Rs 38213.00
    Why is system showing beganing balance? even we checkd up with T.codes FBL3N and FS10N there is also no closing balance.
    Plz advise me how to proceed in this case
    We are unable to analyse the sytem behaviour.  Could you please suggest us the solutiion.
    Thanks,
    Saisri

    Hi,
    Thank you so much
    We have carry forwarded GL balances in F.16 successfully now the problem is one GL balance has been forwarded with Zero balance but when we run the trail balance sheet (S_ALR_87012310 or F.08) as on 30.04.2009 with FY 2009 for period 1, the system is being shown opening balance.
    Plz provide me possible solution
    Thanks,
    Saisri

  • FBCJ - change the opening balance value

    Hi Guys,
    How can I change the opening balance value in FBCJ transaction?!
    Thanks
    Daniel Dorta

    Hi !!
    You have to options to do here
    1. Reveres the receipt entry which was passed wrongly by some other Tcode
    2. The difference amount found in FBCJ & FBL3N, post in Receipt side of FBCJ & Post the same amount as an expenses from FB01
    This adjustment entry will work as a reversal for the previous entry which was made by mistake
    You problem will be solved
    Regards
    Shamulheq

  • Opening balance of gl

    Hello gurus , Hw to calculate or search the opening balance of a gl ( in Fi/co) .
    Is there any Zprogram or yprogram plz help me  , I am waiting for ur valuable healp .
    Thanks .
    Joy .

    hi,
    check transaction FBL3N.
    or check tables BSIS n BSAS.

  • Opening Balances and Closing Balance of customer

    Hi,
    Does SAP provide any standard customer account statement for Opening Balances and Closing Balance for specific date range have given in selection screen?
    The statement also contains reference number, order, and Delivery number.
    Note: FBL5N Transaction code will not sufficient for the requirement, so looking for any other transaction code / report provided by SAP already for it.
    Thanks in advance,
    Shwetha

    Hi,
    There are several standard reports which could be easily accessed through the menu (Accounts Receivable - Information systems). If none of these reports does not suit your requirement, you have to develop your own.
    Regards,
    Eli

  • Table for Customer and vendor open balance on a key date

    Dear All,
    Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
    I have checked with the below table :
    Customer-KNC1, KNC3,BSID, BSAD
    Vendor-LFC1, LFC3, BSIK, BSAK.
    But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
    Plesae let me know, how to go for it.
    Please suggest.

    Hi
    Use BSID and BSIK for open items
    And pass company code, year and from date and to date range in Posting date selection option
    Reg
    Vishnu

  • Fixed Asset Opening Balance

    Hi,
    Any idea to do (by import and manual create) the opening balance for fixed asset Mmaster data? Tried to search SAP notes or guide, only can find related topic on Import FA Master Data and not manual create of FA Master Data, and how to import the FA Master Data with belong to same Asset Type (same life-span) but due to purchase at different timing, now having different remaining life span).
    Thank you.

    Hello,
    I am sorry for unclear answer. I did not mean that you have to develop addon.
    after checking our client database, I see that one asset class will have same useful life and depreciation type which it means that different asset class can only the way to have different useful life (UL), and of course it will be different in depreciation type (DT).
    For example : machine A : UL : 96, DT : SL12.5
                         land        B ; UL 250  DT : SL25.
    Hope you also could discuss with SAP support about this.
    Rgds,

Maybe you are looking for