OpenScript - Adobe Flex script - cannot see flexFT elements

I've created an Adobe Flex script in OpenScript, but when I record a Flex application, or use Inspect Path, I only see "web" elements, and not "flexFT" elements.
What am I missing?

I think I found my own answer here.  I don't yet have access to the source, and am not sure if it's been compiled with the Adobe automation libraries.
FROM: http://docs.oracle.com/cd/E25294_01/doc.920/e15488/opscrpt_using_flxft_module.htm
11.1.2 Prerequisites
The Adobe Flex Functional Test Module recorder has the following prerequisites:
Note:
The automation libraries/swc files are required for Flex Functional Testing only. This does not apply for Adobe Flex (AMF) load testing which records at the protocol level.
The Flex application must include the Adobe Flex automation libraries either at compiles time or at run time. You need at least automation.swcautomation_agent.swcautomation_dmv.swc

Similar Messages

  • I have downloaded bluefire reader and adobe but still cannot see the booke that I borrow. They get downloaded and registered, but I cannot see them anywhere. Can anyone help? Regards from Susanne

    I have downloaded bluefire reader and adobe and have registered correctly. I can borrow books from my library and they do get downloaded, but I cannot see teh in bluefire reader. Can anyone help me? I do not think that I did anything wrong.
    Regards from Susanne, Denmark

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • Cannot see the elements in Web Service Action block

    Hi,
    When I use SoapUI I can see the elements of a Service but when I use Web Service Action block of MII, I can only see the first element (job). The children of job are not appearing in link editor. Any Idea?
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ws="http://ws.ct.xxx.de" xmlns:xsd="http://data.xxx.de/xsd">
       <soapenv:Header/>
       <soapenv:Body>
          <ws:startJob>
             <!--Optional:-->
             <ws:job>
                <!--Optional:-->
                <xsd:a>?</xsd:a>
                <!--Optional:-->
                <xsd:dir>?</xsd:dir>
                <!--Optional:-->
                <xsd:dirR>?</xsd:dirR>
                <!--Optional:-->
                <xsd:u>?</xsd:u>
                <!--Optional:-->
                <xsd:g>?</xsd:g>
                <!--Optional:-->
                <xsd:value>?</xsd:value>
             </ws:job>
          </ws:startJob>
       </soapenv:Body>
    </soapenv:Envelope>

    Anyone has any idea? I really appreciate any idea. Thanks

  • I have elements 8. It opens in editor, I cannot see the organizer button.

    I have elements 8. It opens in editor, I cannot see the organizer button or the little house icon.How do I get it back so I can get into organizer. Thks

    Mac or windows? The mac version of PSE 8 comes with Adobe Bridge, not organizer.

  • Have misplaced my photoshop elements 10 install disk and now getting a message that I need to reinstall the program. I got the application in dec 2013 as  a gift. is there any way to contact adobe by phone to see if i can download it on line ??

    I need to contact adobe by phone to see if i can download photoshop elements 10. I have lost my original disk and i am getting a message that i have to reinstall the application !

    The installer is available from the Adobe website
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    Download, install then enter your serial number.

  • After installing Reader 11.0.07 update on my Mac OS X 10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen.  This never appeared before and I am concerned that my computer is being hacked into

    After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen.  This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus.  Is this normal or do I have to uninstall this update?

    After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen.  This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus.  Is this normal or do I have to uninstall this update?

  • I cannot see certain colors/photos/boxes in Adobe Acrobat Pro 11.  Can in Reader, and in Acrobat Standard 11

    I have a customer who uses Adobe Acrobat Pro 11.  When she receives PDFs, she cannot see the color green, certain boxes(most of the ones she cannot see all have green in them),and pictures.  When I opened this same PDF document in Adobe Reader 11, Adobe Acrobat Standard 11, and Fox it reader, I could see everything as normal.  Her version of Acrobat is up to date.  I posted this Acrobat installations & Update Issues, not sure if correct or not.  She has Windows 7 Professional 64x
    Thank you.

    Hey mmartinez,
    Please let me know what is the OS version on the system being used by your customer?
    Have you tried sending any other PDF files to her? Has she started facing this issue after updating Acrobat?
    Hope to get your response.
    Regards,
    Anubha

  • Folio is uploaded in the server but I cannot see it in my Adobe Viewer

    My folio is uploaded in the server but I cannot see it in my Adobe Viewer in my iPad, any idea guys how to be able to see it in my Viewer?
    Thanks.

    There are some bugs that can cause this issue. If you are adding long, smooth scrolling pages (ie 1024x3000) and performing a "New" to add the page from the Folio Builder Panel versus using the "Import" command, this issue can be caused.
    As the previous posted said, you need to either have all horizontal, all vertical, or all horizontal and all vertical pages. You cannot have a mix of both. If there is a fundamental error with your folio, it iwll not be available in the viewer.

  • Hi All - Cannot See Adobe Edge/Animate in Adobe Application Manager?

    Edit: Have just figured out that this is down to this machine's OS being Windows XP.
    Hi All,
    I am to get to use the release version of Adobe Edge, having had a couple of the pre-releases.
    I have signed up for Creative Cloud, downloaded and ran the application manager, however I cannot see Adobe Edge/Animate anywhere.
    Am I doing something wrong?
    Thanks!
    See pic:

    I think your AAM is not updated.
    Download and Install the latest version of Adobe Application Manager from the below link :
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Try to install the update now and check.

  • I cannot see all html elements

    I have worked on a file in Dreamweaver. When I open it in Edge Animate and look at the Elements panel I can see all the html elements BUT I cannot see them on stage. I can only see the Edge Animation stage. How can I see the entire html page?

    If this is a subscribed calendar that is pulling the events from another server on the internet, and you have a CDMA phone (such as Verizon or Sprint), it may be because your carrier doesn't support simultaneous voice and data (i.e., when you're talking on the phone, the data connection is suspended dropping the subscribed calendar until you're finished with the call).  This is just a guess; I can't confirm this with my phone as I have AT&T which supports simultaneous voice and data.

  • Problem with an application running Adobe Flex. Tech people say they cannot monitor, track or catch the problem.

    Problem with an application running Adobe Flex. tech people say they cannot monitor, track or catch the problem. Application shuts down and give the following erre:
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.

    <moved from Downloading, Installing, Setting Up to Flex>

  • Adobe cannot see my printer....

    Hello. this is my first question on this site as previously, I've never had any problems with Adobe!
    My issue is that I have installed a new printer and now Adobe cannot see this printer.
    I have Windows 7 and my previous printer was an HP which I could use both hard wired and wirelessly to print pdf's. The reason I have changed my printer is that my old printer did not have the ability to be plugged straight into my router but had to be plugged into an old tower pc that I had in order for me to use it wirelessly!
    So, today, I plugged my new Brother MFC-5890CN straight into the router, found it on my laptop and voila everything was perfect. I printed a few word documents and also some stuff from the net but when I went to print a pdf - nothing.
    Things I have tried, with a restart in between.
    Deleting my printer and re-installing.
    Deleting my printer and re-installing with software obtained from Brother website.
    Deleting Adobe Reader and re-installing. (Which gave me a more recent version)
    Plugging the Brother printer into my laptop with a USB cable
    The weird thing is that my husband can print pdf's from his laptop when he connects wirelessly to the Brother printer?
    So its obviously some issue with my laptop and Adobe...
    I feel like I need to be able to get Adobe to reset its printer list. For some reason, although I have deleted my old printer from my machine, that is the printer that comes up as the printer that Adobe wants to use?
    I cannot set my printer as Default either but that is a long standing issue as I couldn't do that with my old printer. It comes up with error message 0x00000709.
    Please does anyone have any help for me????
    Sarah

    Are you still facing this issue?
    Did you try re-starting the spooler services from your machine?

  • Incresing script Time Limit in Adobe Flex Builder 2.0

    Hi All,
    Using a Adobe Flex Builder I am creating an application which
    has lot of complex recursive sorting algorithms that take
    comparitively more time and hence the overall time required to
    complete the excecution of function goes beyond 60 secods after 60
    secods Flash player throws an error message and terminates the
    script excecution.Is there any way to increase scriptTimeLimit more
    than 60 Secods.Currently I am adding scriptTimeLimit parameter in
    Applicatio tag so that I am able to run my function for 60
    seconds...
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute" creationComplete="DoSomething()"
    scriptTimeLimit="60">
    Is there any way to increase tis limit to say 10 minutes?

    You will not be happy to hear this, but no. As of flash
    Player 8, 60 seconds is the maximum.
    I have a client who is frozen at FP7 because of this stupid,
    arrogant decision. I have filed enhancement requests on this to no
    avail.
    People will blather on about how longer times result in a
    "bad experience" for the user, but this is again arrogant for them
    to believe they have any clue what MY application does and what
    users will accept.
    What if Flex Builder bombed out any time a compile took
    longer than 60 seconds? What kind of "experience" would that be?
    Because of this idiotic limitation, I am going to have to
    move my recursive processing to the server. But this will take
    about 6 weeks, and I have yet to find the "spare" time, or to find
    someone to pay for it.
    Grrrr.
    Sorry to be the bearer of bad news.
    Tracy

  • Elements 11 cannot see my Panasonic HDC-TM900

    Elements 11 cannot see my Panasonic HDC-TM900 camera; Windows 7, 64-bit; neither could Corel Video Studio Pro X4 but Windows Live Movie Maker can. I've rolled back the IEEE 1394 controller to the 1394 OHCI legacy driver as recommended elewhere but still no joy

    Steve's advice and knowledge is unsurpassed.  But, I don't think he has a Panasonic AVCHD/1080p60 camcorder.  Maybe I can add a little to the mix by explaining how I do it with PrE11.  It also worked with PrE9 and better with PrE10.  PrE11 added a little that makes it the best of the three.
    I have a near twin to your camera (SDT-750), Win 7, Pre-11 and HDWriter.
    My choice is to use HDWriter to move the files from the camera.  It works equally well with the camera connected with a USB cord or inserting the SD card in the computer.  I like it because it does a good job of organizing a file structure, provides quick preview and "lossless" cliping and joining.  It also has some other useful features, but falls far short of PrE11 when it comes to making videos with some creativitiy.
    After HDWriter moves the files to the computer, I backup to an external HDD and then reformat the SD card in the camera.
    HDWriter's functions require some small accessory files that PrE11 does not use.  The big ones that end in .m2ts are the ones you want for PrE11.  You can leave them where they are and they will be undesterbed by PrE11.  For major projects I put copies of the .m2ts files I want in a folder named for the project and tell PrE11 to keep the project files there too.
    In PrE11 I do as Steve shows in his video, which is Add Media>Files and Folders.
    I don't use the Elements organizer at all.   All formats the Panasonic camera produces, including the 1080p files, are handled well this way. 
    You have a very good camcorder and PrE11 isexcellent software.  But, I don't think I would use PrE11 to open files on the camcorder without getting them moved to the computer first.
    Hope this helps. 
    Bill
    PS:  If you have no use for the unique functions of HDWriter, you can copy just the .m2ts files with Windows Explorer and put them anywhere you want.

  • I am setting up a new computer. I've installed and signed into Adobe Digital Editions, but cannot see the ebooks I have purchased.

    I am setting up a new computer. I've installed and signed into Adobe Digital Editions, but cannot see the ebooks I have purchased.

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Ninaa43224110 what version of Illustrator are you installing?  Are you using the serial number registered under your account at http://www.adobe.com/?  For information on how to locate the registered serial number under your account please see Find your serial number quickly.

Maybe you are looking for