Optical line break in dataTable row ?!

Hello,
I have to work with very large tables (in width and heigth) and use a f:datatable to publish them on the screen. Now I want to prevent the user scrolling to the left and the right while viewing the table.
I tried to insert a f:panelgrid in the f:datatable, but my IDE said, that this is not a good idea.
Is there any chance to split one row into two rows, but only for the presentation?!
Has anybody an idea?
Thanks,
Thomas

Uhh,
it is possible. Just use the halfe set of coulmn's and create in each cell a new table with two rows.
Bye,
Thomas

Similar Messages

Convert rows to columns and put line break in between using t-sql

Hi,
I have a table with 5 columns..and my source data looks like this..
RecordID ID Display AddressType EmailAddress
 1 1 GeneratedBy From
[email protected]
 1 1 ReceivedBy To
[email protected]
 1 1 ReceivedBy To
[email protected]
 2 1
 3 1 GeneratedBy From
[email protected]
 3 1 GeneratedBy From [email protected]
 3 1 ReceivedBy To
[email protected]
I need t-sql to show output as..
RecordID ID FullDisplay
 1 1 GeneratedBy From -
[email protected] < CHAR(13) - Need Line Break here so that it goes to 2nd line>
 ReceivedBy To -
[email protected] ; To -
[email protected]
 2 1 Null
 3 1 GeneratedBy From -
[email protected] ; From -
[email protected] < CHAR(13) - Need Line Break here so that it goes to 2nd line>
 ReceivedBy To -
[email protected]
Display field will have 3 values - "GeneratedBy" , "ReceivedBy" or Null
AddresType field will have 3 values - "From" , "To" and Null.
In the above example, Those 7 records belongs to ID=1.
Whenever RecordID is same I want to show everything in one line with line breaks in between.
In the above example RecordID=1 has 3 rows, display it as 1 row. But Whenever 'ReceivedBy' is there for same recordID put a line break before "ReceivedBy"
create Statement:
Create Table SampleTest
(RecordID int null, ID int null , Dispplay varchar(20) null, AddressType varchar(6) null , EmailAddress Varchar(25) null)
Insert Statement:
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'GeneratedBy','From','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (2,1, Null,Null,Null)
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'ReceivedBy','To','[email protected]')
Thanks!
sql

Try below
drop table SampleTest
GO
Create Table SampleTest
(RecordID int null, ID int null , Display varchar(20) null, AddressType varchar(6) null , EmailAddress Varchar(25) null)
--Insert Statement:
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'GeneratedBy','From','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (2,1, Null,Null,Null)
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'ReceivedBy','To','[email protected]')
with CTE1 as
select ROW_NUMBER() over(PARTITION by RecordID ,ID,Display order by EmailAddress)rno,* From SampleTest
), CTE2 as (
select RecordID ,ID,'GeneratedBy '+ STUFF(( SELECT '; From - ' + EmailAddress AS [text()]
FROM CTE1 b
WHERE
a.RecordID=b.RecordID and a.ID=b.ID and b.Display = 'GeneratedBy'
FOR XML PATH('')
), 1, 2, '' ) GeneratedBy,
'ReceivedBy '+ STUFF(( SELECT '; To - ' + EmailAddress AS [text()]
FROM CTE1 b
WHERE
a.RecordID=b.RecordID and a.ID=b.ID and b.Display = 'ReceivedBy'
FOR XML PATH('')
), 1, 2, '' ) ReceivedBy
From CTE1 a
group by RecordID ,ID
select RecordID ,ID,GeneratedBy +CHAR(13)+ ReceivedBy as FullDisplay from CTE2
Thanks
Saravana Kumar C

How to handle line break embeded inside CSV column

Hi there,
I am under the pressure to make it work. I already put this question on APEX forum, but on second thought, I think it relates more to PL/SQL rather than APEX since APEX 4.1 already have utility to handle CSV Upload.
If you read it already in APEX forum, please ignore.
I am sorry for that. Thanks for reading.
I need to develop an app that allows user to upload CSV file to a interface table.
The APEX version at my workplace is 4.0.2.
I used the code from
http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:11000346061523
It all works well till recently I find out
If a column in a CSV file cotain a line break (or new line) e.g. (The tester copy and paste this text which has line break into a column in a spreadsheet)
This is the first sentence.
This is the second sentence.
It will break the “This is the second sentence”. To a new column.
The contents of the CSV viewed in Notepad look as below
Assessment Date,Scheduled Date,Assessment Provider,Assessor Name,Court,First Name,Middle Name,Last Name,PRN Person Record Number,NHI Number,Defendant Attended Y/N,Is Dependent Y/N,Notes,Primary Ethnicity,"Ethnicity Other, please specify",Gender,Currently in Treatment Y/N,Substance of Concern 5,Other Substance Specified
22/09/2012,,Provider Co Name,Warren Edgley,Wellington,,,Salty,2545554,dgsdf,ergerg,,"This is the first sentence.
This is the second sentence.",Japanese,,Female,b,,
Here is the code from the CSV UTIL, please help me to find out how can I replace the line break to a space so that the uploading process is correct.
CREATE OR REPLACE PACKAGE BODY "CSV_UTIL"
AS
 --strip the beginning and the end quotes, then replace double quotation with single
 FUNCTION de_quote (p_str IN VARCHAR2, p_enc_by IN VARCHAR2)
 RETURN VARCHAR2
 IS
 v_str VARCHAR2(32767) := p_str;
 BEGIN
 IF (p_enc_by IS NULL)
 THEN
 RETURN p_str;
 ELSE
 IF SUBSTR(p_str,-1) = p_enc_by THEN
 v_str := SUBSTR(p_str,1,LENGTH(p_str)-1);
 END IF;
 IF SUBSTR(p_str,1,1) = p_enc_by THEN
 v_str := SUBSTR(v_str,2);
 END IF;
 RETURN REPLACE (v_str,
 p_enc_by || p_enc_by,
 p_enc_by
 END IF;
 END de_quote;
 PROCEDURE parse (p_str IN VARCHAR2, p_enc_by IN VARCHAR2, p_sep IN VARCHAR2)
 IS
 l_n NUMBER DEFAULT 1;
 l_in_quote BOOLEAN DEFAULT FALSE;
 l_ch NCHAR (1);
 l_len NUMBER DEFAULT NVL (LENGTH (p_str), 0);
 BEGIN
 IF (l_len = 0)
 THEN
 RETURN;
 END IF;
 g_words := g_empty;
 g_words (1) := NULL;
 FOR i IN 1 .. l_len
 LOOP
 l_ch := SUBSTR (p_str, i, 1);
 IF (l_ch = p_enc_by)
 THEN
 l_in_quote := NOT l_in_quote;
 END IF;
 IF (l_ch = p_sep AND NOT l_in_quote)
 THEN
 l_n := l_n + 1;
 g_words (l_n) := NULL;
 ELSE
 g_words (l_n) := g_words (l_n) || l_ch;
 END IF;
 END LOOP;
 g_words (l_n) := de_quote (g_words (l_n), CHR(10));
 g_words (l_n) := de_quote (g_words (l_n), CHR(13));
 FOR i IN 1 .. l_n
 LOOP
 g_words (i) := de_quote (g_words (i), p_enc_by);
 END LOOP;
 END parse;
Author: Oleg Lihvoinen
Company: DbSWH
Changes:
10.02.2011, There was a miscalculation of the file line last position in case it is the end of file
 PROCEDURE upload (p_file_name VARCHAR2, p_collection_name VARCHAR2, p_enc_by IN VARCHAR2, p_sep_by IN VARCHAR2, p_rows NUMBER)
 IS
 v_blob_data BLOB;
 v_clob_data CLOB;
 v_clob_len NUMBER;
 v_position NUMBER;
 v_char NCHAR (1);
 c_chunk_len NUMBER := 1;
 v_line VARCHAR2 (32767) := NULL;
 v_data_array vcarray;
 v_rows NUMBER := 0;
 n_seq NUMBER := 1;
 dest_offset NUMBER := 1;
 src_offset NUMBER := 1;
 amount INTEGER := DBMS_LOB.lobmaxsize;
 blob_csid NUMBER := DBMS_LOB.default_csid;
 lang_ctx INTEGER := DBMS_LOB.default_lang_ctx;
 warning INTEGER;
 l_sep VARCHAR2(100) := CASE WHEN p_sep_by = '\t' THEN chr(9) ELSE p_sep_by END;
 BEGIN
 htmldb_collection.create_or_truncate_collection
 (p_collection_name => p_collection_name);
 -- Read blob from wwv_flow_files
 SELECT blob_content
 INTO v_blob_data
 FROM wwv_flow_files
 WHERE NAME = p_file_name;
 v_position := 1;
 DBMS_LOB.createtemporary (lob_loc => v_clob_data,
 CACHE => TRUE,
 dur => DBMS_LOB.SESSION
 DBMS_LOB.converttoclob (v_clob_data,
 v_blob_data,
 amount,
 dest_offset,
 src_offset,
 blob_csid,
 lang_ctx,
 warning
 v_clob_len := DBMS_LOB.getlength (v_clob_data);
 IF v_clob_len = 0 THEN
 RETURN;
 END IF;
 WHILE (v_position <= v_clob_len + 1)
 LOOP
 v_char := DBMS_LOB.SUBSTR (v_clob_data, c_chunk_len, v_position);
 v_line := v_line || v_char;
 v_position := v_position + c_chunk_len;
 -- When the whole line is retrieved and not end of file or end of file
 IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
 THEN
 parse (p_str => v_line, p_enc_by => p_enc_by, p_sep => l_sep);
 v_data_array := g_words;
 FOR i IN 1..g_words.count LOOP
 IF i <= 50 THEN
 v_data_array(i) := g_words(i);
 ELSE
 exit;
 END IF;
 END LOOP;
 FOR i IN g_words.count + 1..50 LOOP
 v_data_array(i) := null;
 END LOOP;
 v_rows := v_rows + 1;
 -- exit if uploaded specified number of rows
 IF p_rows IS NOT NULL AND v_rows > p_rows THEN
 EXIT;
 END IF;
 -- Store data to collection
 n_seq :=
 htmldb_collection.add_member
 (p_collection_name => p_collection_name,
 p_c001 => v_data_array
 (1),
 p_c002 => v_data_array
 (2),
 p_c003 => v_data_array
 (3),
 p_c004 => v_data_array
 (4),
 p_c005 => v_data_array
 (5),
 p_c006 => v_data_array
 (6),
 p_c007 => v_data_array
 (7),
 p_c008 => v_data_array
 (8),
 p_c009 => v_data_array
 (9),
 p_c010 => v_data_array
 (10),
 p_c011 => v_data_array
 (11),
 p_c012 => v_data_array
 (12),
 p_c013 => v_data_array
 (13),
 p_c014 => v_data_array
 (14),
 p_c015 => v_data_array
 (15),
 p_c016 => v_data_array
 (16),
 p_c017 => v_data_array
 (17),
 p_c018 => v_data_array
 (18),
 p_c019 => v_data_array
 (19),
 p_c020 => v_data_array
 (20),
 p_c021 => v_data_array
 (21),
 p_c022 => v_data_array
 (22),
 p_c023 => v_data_array
 (23),
 p_c024 => v_data_array
 (24),
 p_c025 => v_data_array
 (25),
 p_c026 => v_data_array
 (26),
 p_c027 => v_data_array
 (27),
 p_c028 => v_data_array
 (28),
 p_c029 => v_data_array
 (29),
 p_c030 => v_data_array
 (30),
 p_c031 => v_data_array
 (31),
 p_c032 => v_data_array
 (32),
 p_c033 => v_data_array
 (33),
 p_c034 => v_data_array
 (34),
 p_c035 => v_data_array
 (35),
 p_c036 => v_data_array
 (36),
 p_c037 => v_data_array
 (37),
 p_c038 => v_data_array
 (38),
 p_c039 => v_data_array
 (39),
 p_c040 => v_data_array
 (40),
 p_c041 => v_data_array
 (41),
 p_c042 => v_data_array
 (42),
 p_c043 => v_data_array
 (43),
 p_c044 => v_data_array
 (44),
 p_c045 => v_data_array
 (45),
 p_c046 => v_data_array
 (46),
 p_c047 => v_data_array
 (47),
 p_c048 => v_data_array
 (48),
 p_c049 => v_data_array
 (49),
 p_c050 => v_data_array
 (50)
 -- Clear the line
 v_line := NULL;
 END IF;
 END LOOP;
 END;
END;In my apps, I save these straight into a table rather than an APEX collection because the number of columns can be longer than 50.
I want to find out how can replace these line break inside a column to a space.
If any one has any ideas, please let me know.
Thanks a lot in advance.
Ann

Ann586341 wrote:
I think the code split the whole thing by this line
-- When the whole line is retrieved and not end of file or end of file
IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
THEN
Yes, exactly. That piece of code believes all CHR(10) occurences are record delimiters.
It is not smart enough to recognize that a CHR(10) within quotation marks are part of the data.
Optimally a solution should keep the CHR(10) rather than replacing with spaces, but that will be a bigger rewrite of the UTL_CSV code ;-)
If you are happy with replacing with spaces, a "simple" solution could be something like:
Declare a boolean variable in upload procedure:
v_within_text_column boolean := false;And use it like this:
 WHILE (v_position <= v_clob_len + 1)
 LOOP
 v_char := DBMS_LOB.SUBSTR (v_clob_data, c_chunk_len, v_position);
 IF v_char = '"' THEN
 v_within_text_column := NOT v_within_text_column;
 ELSIF v_char = CHR(10) AND v_within_text_column THEN
 v_char := ' ';
 END IF;
 v_line := v_line || v_char;
 v_position := v_position + c_chunk_len;
 -- When the whole line is retrieved and not end of file or end of file
 IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
 THEN
 v_within_text_column := false; -- To be safe always set this on "true" linebreaks
{code}
+(This is untested code just written here in the text editor.)+
It should work by toggling a flag whether you are "within" the quotes or not and then replacing CHR(10) with a space if you are within a text column.
This way we avoid having to go through the clob more than once (it is enough that this code walks the clob one character at a time...)
It will not handle if the clob contains situations like:
{code}
abc,123,"This is a text with a quote from a man who said \"To Be,
or Not To Be\" some hundred years ago",123,xyz
{code}
Escaped quotes would need separate attention ;-)

How to insert new line break in XSLT mapping

Hi experts,
I am doing file to mail scenario, i am sending the text file as an attachment using reciever mail adapter.
I did everything, i can able to send the mail with text file attachment, but with in the file i got multiple rows, i need to put line break in XSLT mapping.
I did use following statement but it is inserting small rectangle between the records, the records are not separating with new lines, all are in one line.
<xsl:text>*#xA;</xsl:text>
note: in real coding replace * with &
Can anyone suggest me how to insert new line in XSLT mapping.
My XSLT mapping as look like:
<?xml version='1.0'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ns0="http://www.Coj.co.za/SapIsuToABSA/DirectDebitFile">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:variable name="break"> </xsl:variable>
<xsl:variable name="space"> </xsl:variable>
<xsl:variable name="newline"><xsl:text></xsl:text></xsl:variable>
<xsl:template match="/">
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>Please Check Attached Direct Debit File</Subject>
<From>S@za</From>
<To>P@za</To>
<Content_Type>text/plain</Content_Type>
<Content>
<xsl:for-each select="MT_SapIsuToABSA_DirectDebitFile/DirectDebitRec/Body">
<xsl:value-of select="Space1"/>
<xsl:value-of select="Cust_AccNo"/>
<xsl:value-of select="Reserve_1"/>
<xsl:value-of select="Cust_Name"/>
<xsl:value-of select="Cust_Name1"/>
<xsl:value-of select="Cust_Bank_AccNo"/>
<xsl:value-of select="Space2"/>
<xsl:value-of select="Cust_Bank_BranchNo"/>
<xsl:value-of select="Reserve_2"/>
<xsl:value-of select="Space3"/>
<xsl:value-of select="Cust_AccNo_1"/>
<xsl:value-of select="Space4"/>
<xsl:value-of select="Reserve_3"/>
<xsl:value-of select="Deduction_Amnt"/>
<xsl:value-of select="Space5"/>
<xsl:value-of select="Reserve_4"/>
<xsl:value-of select="Space6"/>
<xsl:value-of select="Action_Date"/>
<xsl:value-of select="Space7"/>
<xsl:value-of select="Reserve_5"/>
<xsl:text>*#xA;</xsl:text>
note: in real coding replace * with &
</xsl:for-each>
</Content>
</ns1:Mail>
</xsl:template>
</xsl:stylesheet>
Kind regards,
Praveen

Hi,
I think <xsl:text>#xa;</xsl:text> should do the trick, but depending on which OS (ux or win), the "new line" chars sequence is different (win would require a CRLF like <xsl:text>#xd;*#xa;</xsl:text>)
Chris
-> &
Edited by: Christophe PFERTZEL on Apr 14, 2010 2:16 PM

Line Break in Chart Title??

Hi! Does anyone know how to make a line break in the title of a chart? For some reason, just pressing return or any combination of return with option, control, shift, etc. does not seem to be working... the title is really long to be on a single line and I'm not able to change the size either.

Hi kp,
True for Category titles, which are taken from a header column (see examples— Cat 1 through Cat 4 on table and chart below), but not for the Chart title, which displays an option return as a space, and whose box extends horizontally to accommodate the whole title in a single line, even when that line extends beyond the screen/page boundary (see example on chart).
Table names, when shown, are carried in a box that expands only to the width of the table to which they belong, which led to the example above the chart:
For the table example, there are two tables,
"Table with...title" contains two columns, and is placed behind "Table 1", the table containing the data. Only the first table has the Show title box checked.
Just a parlour trick, though—no advantage I can see to using this method of displaying a long table name over using a text box, as suggested earlier by Jerry.
I can see where your suggestion regarding category names could have some merit, though. Its disadvantage is in doubling the height of the rows from which those names are grabbed.
Regards,
Barry

Unexpected line breaks in output of a sql query

Hi,
I have a query which looks like:
set pages 0
set feed off
set newp 0
set lines 350
select LPAD(SUBSTR(COLUMN1,1,23),23),LPAD(SUBSTR(COLUMN2,1,42),42), SUBSTR(TO_CHAR(START_TIME,'HH24:MI:SS'),1,8),SUBSTR(TO_CHAR(END_TIME,'HH24:MI:SS'),1,8)
FROM TABLE1;
When executed using SQL*Plus this query puts a line break after each column and hence I get a record on several rows on the screen.
But the last two columns are printed on the same line. I suspect the LPAD is causing some problem.
I have two databases. It works perfectly on one and not on the other.
Is there a oracle parameter due to which the result is affected?
T&R,
BRK

Try this:
set pages 0 feed off newp 0 lines 350 trims on
select LPAD(SUBSTR(COLUMN1,1,23),23)
     , LPAD(SUBSTR(COLUMN2,1,42),42)
     , TO_CHAR(START_TIME,'HH24:MI:SS')
     , TO_CHAR(END_TIME,'HH24:MI:SS')
FROM TABLE1;

How to put line break in the text

Hi guys,
This is a simple problem.i don't know how to concat a line break while creating a text.
I am looping through the results of a query and want to form the text using the results.
For each row of the resultset,I want to create a new line in the text i create.
I was wondering how to put a new line in the text.
I thought I can concat '\n' ,but it does not work.
the code snippet in the procedure is :
for c1_rec in c1 loop
vMsg := ' There are ' || c1_rec.total ||
     ' documents of type ' || c1_rec.doc_type || '\n' ;
end loop;
Please give the solution.
Thanks in advance.

Thank you Mark.
I tried your suggestion.But line break is not working in email.
Here is how my code is
in procedure 1 ,i create the message String as :
for c1_rec in c1 loop
vMsg := vMsg || ' ' || today_str || ' - ' || c1_rec.total ||
     ' Total inbound documents from : ' || c1_rec.target_value || CHR(13)||CHR10) ;
dbms_output.put_line(' ' || vMsg);
end loop;
--here sending mail calling another procedure
sendmail( '[email protected]' ,'[email protected]' , 'Test Subject ' , vMsg );
In Procedure 2( i.e sendmail procedure )
i am preparing email server connection from and to adresses .Then i am preparing and sending message as
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
conn:= utl_smtp.open_connection( EmailServer, Port );
     utl_smtp.helo( conn, EmailServer );
     utl_smtp.mail( conn, SENDER);
     utl_smtp.rcpt( conn, RECEIVER )
mesg:= 'Subject: ' || SUBJECT || crlf ||
               'Date: '||TO_CHAR( SYSDATE, 'Dy, dd Mon yyyy hh24:mi:ss' )||
               crlf ||
               'From:'||SENDER|| crlf ||
               'To: '||RECEIVER || crlf ||
               'Content-Type: text/html; charset=ISO-8859-1' || crlf ||
               '' || crlf || MESSAGE ;
     utl_smtp.data( conn, mesg );
     utl_smtp.quit( conn );
even now the mail we are getting is not having the line break.I am having line break in dbms output,but not in the mail.
Is there any mistake how I am sending the mail.Or is there any other way we can put line break in the text
Thank you.

How to extract compiled stored procedure without line break for long statement

After I compiled stored procedure which contains long statement, the statement would cut into 2 rows into dba_source.
However, when I extract the codes from dba_source table, the source couldn't be compiled successfully because of
the broken lines.
For example, the following statement would be broken into 2 rows like this:
(line 1) gv_Message := 'Interface Description: Interface with Training '|| 'and Development Intran
(line 2) et (Evaluation Statistic Details)';

That's very strange. What did you originally compile it with (sql*plus, toad, etc...)? I was able to compile a procedure with the maximum line length (2499 characters see error SP2-0027) and there is no split. Is the procedure in a VALID state with that line break? Honestly, this seems very odd, possibly even a bug here somewhere.
Richard

How to remove extra line breaks in my html code?

On my website: 2neatmagazines.com, I have old html, written years ago. The html all functions fine, no problems in the broswers. When I Iook at the code, there are lots of line breaks in the text portions.
I can do "apply source formatting", and that has cleaned and aligned the html code nicely. But, the text descriptions in the html still breaks at fixes places. This does not affect how it renders, just how the code looks. For example:
 Life
 Magazine January 11, 1937 : Cover - Japanese
 soldiers doing their exercises. Full page LIFE magazine
 ad with railroad locomotive at night. The "first"
 candid photographs taken by Paul Nadar of Paris in 1886.
 Governors - new and old. Margaret Sanger wins the court
 victory that birth control contraceptives can be sent
 by mail, long fight for related women's rights . Bootleg
 coal mining near Shamokin, Pennsylvania. Painter Winslow
 Homer. Dinosaurs Enshrined (collection, storage and
 display of dinosaur fossils in museums, including Dinosaur
 National Monument). Baths of Foam, milk, mud,and wax
 for beauty. . Theatre in 1936 and 1937. Japanese Army.
 Sonja Henie in her movie "One in a million."
 Includes photos of Sonja Henie bicycling - looks like
 today's town cruiser bikes. . Amazing series of photos
 of San Francisco people interacting (or not) with bum
 laying on sidewalk. Photos from wreck of United Airliner
 which crashed December 27, 1936 in the Santa Susana
 Mountains of California. Five airline crashes in two
 weeks at end of 1936. Ice hockey fights. "Tobacco
 Road" on Broadway. Japanese soldiers training.
 Neat photo of five new locomotives in a row, Canadian
 National Railways. 
 Very Good - $52
I would like the main text to be wrapped, and neat. I have tried various "text cleaners" like Haven for the mac, but none of the settings will get rid of this annoying line break formatting.
Any suggestions would be appreciated.
mark

The only "Line Break"
 I see is at the end.
Code formating just cleans the display of the visual code it doesn't effect the browser display.
You can do a "Search and Replace" the with nothing. to strip all for the whole site or DIR or page.
In code view right mouse click and choose
"Search and Replace"
Is this what your are asking help on?
Shane

How to protect a text from line break in smartforms

Hi Gurus,
How to protect line break in a text element of smartforms. Text in that line is printing exactly 70 characters. I want the text to be printed fully till the size of the window. How to stop this automatic line break.
Regards,
Rithika.

What I have done may be helpful, so here are the details:
I had a table of text values, so I converted this to a string with concatenate, then string to a long character field, then used RKD_WORD_WRAP to put into table of 132 characters. Then I constructed a table of type tline by looping at my RKD_WORD_WRAP output, and utilized SAVE_TEXT to temporarily store a TEXT entry, like you would save with SO10, saving my desired paragraph format into TDFORMAT field and inserting any necessary character format commands into the text.
In my SmartForm, I then have dynamic text processing pointing to the internal table fieldnames containing tdname, tdid, tdobject, tdspras of what I saved. This allows SmartForms to utilize the full width of the window and optimize text output, based on window width, font, scale, paragraph format, character format, etc. These text identifier values are passed as part of my internal table via the SmartForms interface.
At the end of SmartForms processing, I loop at my internal table and utilize DELETE_TEXT to remove the temporary texts that I created for this set of output.
To avoid page breaks in my text, I put my output for a "block" of data into a folder (see the SmartForms folder feature). I have page protection on the folder...that way, SmartForms examines the length of the folder content and decides whether a page break should occur before any output for my block of data begins. My block of data contains a few data elements over 5 rows of output followed by two separate dynamic texts of various lengths. If the entire block won't fit on the remaining part of a page, page-break occurs first.

Decode does not work for line breaks

Hi experts,
In a BLS, I am decoding a string which I output . It decodes the spaces but not for linea breaks. What is wrong ¡?
Thanks and best regards,
Antonio Rodriguez Rubalcaba

Jeamy,
I forgot the examples .
Best regards,
NOTE
Note : Copying and pasting the text into the note pad shows no problem ( it has linebreaks ) . This is also true when I copied the decoded thext from the INFO section of the Transaction execution onto this message . However , the BLS OUTPUT does not have line breaks .
UNDECODED TEXT EXAMPLE
I use the following expression : "Text = " & IllumSQLQuery_0.Results{/Rowsets/Rowset/Row/NOTA} and I get the following :
INFO : Text = REPRESENTACION%20NUEVO%20LAREDO.-%20SE%20RECIBE%20LOTE%20DE%20GAS%20DE%20IMPORTACION%20POR%2015%2C000%20BLS.%20FLUJO%20DE%20RECIBO%201%2C322%20BPH.%20%0D%0AINICIO%20EL%20RECIBO%20AYER%20A%20LAS%2023%3A50%20HRS.%0D%0A%0D%0AREPRESENTACION%20CADEREYTA.-%20EXISTENCIA%20BOMBEABLE%2010%2C000%20BLS.%0D%0A%0D%0ATDGL%20POZA%20RICA.-%20EXISTENCIA%20BOMBEABLE%206%2C000%20BLS.%0D%0A%0D%0ALPG%20DUCTO.-%20SE%20PRESENTO%20FALLA%20EN%20LA%20ESTACI%D3N%20NO.%204%20DE%20REBOMBEO%20SUSPENDIENDO%20EL%20FLUJO%20DEL%20LPG%20DUCTO%20DE%20LAS%2004%3A50%20A%2005%3A05%20HRS.%0D%0A%0D%0AB/T%20ANAFI.-%20ARRIBO%20EL%2010.02.2011%20A%20LAS%2006%3A00%20HRS.%20PARA%20DESCARGAR%2020%20MTM%20DE%20AMONIACO%20EN%20LA%20TDGL%20TOPOLOBAMPO%2C%20SE%20ENCUENTRA%20FONDEADO.%0D%0A%0D%0AB/T%20GASCHEM%20HAMBURG.-%20CONTINUA%20DESCARGA%20DE%20AMONIACO%20EN%20LA%20TDGL%20TOPOLOBAMPO.%20DESCARGADO%206%2C430%20TM%2C%20POR%20DESCARGAR%208%2C570%20TM.%0D%0A%0D%0AB/T%20BW%20BOSS.-%20ETA%2001.03.2011%20PARA%20DESCARGAR%2046.8%20MTM%20DE%20GAS%20LP%20EN%20LA%20TR%20PAJARITOS.%0D%0A%0D%0ACOATZACOALCOS%3A%20CONTINUA%20EL%20ENVIO%20DE%20BUTANOS%20A%20LA%20REFINERIA%20MINATITLAN.%0D%0A
DECODED TEXT EXAMPLE
I user the following expression : "Text = " & IllumSQLQuery_0.Results{/Rowsets/Rowset/Row/NOTA} and I get the following :
INFO : Decoded Text = REPRESENTACION NUEVO LAREDO.- SE RECIBE LOTE DE GAS DE IMPORTACION POR 15,000 BLS. FLUJO DE RECIBO 1,322 BPH.
INICIO EL RECIBO AYER A LAS 23:50 HRS.
REPRESENTACION CADEREYTA.- EXISTENCIA BOMBEABLE 10,000 BLS.
TDGL POZA RICA.- EXISTENCIA BOMBEABLE 6,000 BLS.
LPG DUCTO.- SE PRESENTO FALLA EN LA ESTACI�N NO. 4 DE REBOMBEO SUSPENDIENDO EL FLUJO DEL LPG DUCTO DE LAS 04:50 A 05:05 HRS.
B/T ANAFI.- ARRIBO EL 10.02.2011 A LAS 06:00 HRS. PARA DESCARGAR 20 MTM DE AMONIACO EN LA TDGL TOPOLOBAMPO, SE ENCUENTRA FONDEADO.
B/T GASCHEM HAMBURG.- CONTINUA DESCARGA DE AMONIACO EN LA TDGL TOPOLOBAMPO. DESCARGADO 6,430 TM, POR DESCARGAR 8,570 TM.
B/T BW BOSS.- ETA 01.03.2011 PARA DESCARGAR 46.8 MTM DE GAS LP EN LA TR PAJARITOS.
COATZACOALCOS: CONTINUA EL ENVIO DE BUTANOS A LA REFINERIA MINATITLAN.

Line Break on Textarea using javascript

I have a data loading page into a table with a single column of varchar(4000). When the user pastes into the textarea, there are multiple line breaks - but some of the lines are > 4000 and end up being truncated during the load process. What I would like to do is in javascript: 1) find the lines that are longer than 4000 and insert a \n so that two (or more) rows will be loaded rather than truncated.
http://apex.oracle.com/pls/apex/f?p=80892:1 user: demo pw: demo workspace: SVK

I was trying to map the line break in a embedded field inside a paragraph. So I guess that is the reason why is not working.
To make it clear: I'm triggering the paragraphs through a MLT with the ParagraphAssembly rule and a paragraph list.
Some of these paragraph need to put some data extracted from the XML input just in the middle of the text.
I have tried the html tags line break and paragraph , in the middle of the text and also in the field, but is not working, the tags are being shown instead of the line break.
Any ideas?

How to show Report Result line breaked(or seprate) into Total AVG MAX MIN?

Hi all,
in my report i have report result line which give Total value of all charetristic lines,
I required to show this Report result line breaked into 4 section one for Total, one for avg, one for max, one for min of that cheretristic lines value, OR if we can show 4 diffrent(Total, Avg,.... ) result lines in report.
we can show one result line for Total or AVG or MAX OR MIN Eitherwise by setting keyfiguer result line property from calculate > calculate result as - Total or Max or Min or Avg, My requirement to show all together for singal Keyfiguer.
Is there any work around for this OR enhancment of result line by user exit or by setting some where possibel?
Regards,
Dushyant.

in last post output is scattered,
I am getting output like this:
characteristic(row).......................... KeyFig(column)
Equipment 1...................................... 2 (outstanding notification value)
Equipment 2...................................... 3
Equipment 3 ......................................4
Result Value ......................................9 (By default Total value of above 3 notification)
My require output is:
characteristic(row).......................... KeyFig(column)
Equipment 1...................................... 2 (outstanding notification value)
Equipment 2...................................... 3
Equipment 3 ......................................4
Result Value ......................................9 (By default Total value of above 3 notification)
req additional row...........................3 (Average of above 3 equipment value).
req additional row...........................4 (Max from above 3 equipment value).
I require all single value row of equipment and its(equipment) result required as Total, Avg, Max simultaneously in row only, is there any work around.
Regards,
Dushyant.

Deleting extra forced line breaks with Find/Change

Ladies and Gentlemen,
I'm importing word .doc that are text-heavy and the formatting is such that there are lots of extra forced line breaks creating a blank line between paragraphs.
To avoid manually deleting the extra forced line breaks to eliminate the blank line of space between paragraphs, what are the best steps to doing this an easier way?
Any advice on clear steps to do it using the find/change option?
Thanks in advance as always..
JRH

Are you talking about two hard returns [Enter] in a row, or a soft and hard return [Shift + Enter] and [Enter]? A forced line break is a soft return, but most Word users would just hit the return key for an empty paragraph to get an empty line.
In either case, you can do a simple text find change, if GREP intimidates you. Use the special characters menu to enter either two "end of paragraph" or a "forced line break" and "end of paragraph" markers into the find field and a single "end of paragraph" marker into the change field.
This is included as part of the "Find/change by list" sample script which adds some other common cleanup functions like converting two spaces to one. The advantage to using GREP is it will find any number of consecutive paragraph end markers and convert to one in a single pass, while a text search must be run multiple times to catch the heavy handed author.
Peter

ALV Export to excel (spreadsheet) without line break

my ALV report contains 76 columns, if i try to download it in an excel sheel its not getting displayed in correct format.
Few columns are automatically displayed in the second row and also all my values are getting collapsed due to this display.
In the print preview also i am getting the same problem.
Is there any column limit in ALV display or i can make it to get display correctly as it is in the exact output.
ALv reports contain various options such as sort,filter,print preview, download to excel etc....in this if i use the download to excel option in the excel sheet its getting displayed as col1,col2,col3.......col54
col55,col56.................col75
but i need the output to be in a single line such as col1,col2,col3,.........col75
I do not want the line break.
Edited by: Suhas Khengle on Oct 1, 2008 11:50 AM

Hi Suhas,
Can you tell me what was the solution for your issue? I'm also facing same issue
Regards,
Siva

Optical line break in dataTable row ?!

Similar Messages

Maybe you are looking for