Optical mouse (AVF AM1940U) is not working in CQ40-101TU which is running Windows 7 32-bit.

Hi. I'm using Compaq CQ40-101TU which is running Windows 7 Professional 32-bit.. My optical mouse (AVF AM1940U) is not working in USB ports. The pointer of mouse is always stuck at top of the screen. I can move the mouse left or right to both edges of the screen at the top and can right click in this regard it works but I cannot move the mouse down the screen. 
What is the problem? May I know how to solve it?
Thanks.

Ya. Another mouse didn't have problem. This is the first time I face this problem. When this optical mouse is plugged into USB ports, the driver named "iBall Advanced Mouse" is being installed. After that, my mouse cannot working.
Is that I have to install another driver before using this mouse?
Thanks.

Similar Messages

  • Itune is not working in my laptop which is having windows 8 operating systems

    itune is not working in my laptop which is having windows 8 operating systems after installing itune 64bits.

    Dear Thomas A Reed,
    Thank you so much for you reply. Is that possible to do the retore of my Mac without Disk. I have tried other Movie Disk as you mentioned and that worked properly. so now according to you my disk is not good.
    Its really strange that i am using my installtion disk first time and it has no scratch but its not working. now I guess I have to replace new DVD with this one.
    Thanks again.
    Kind Regards,
    Sghalay81

  • Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

    I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

    Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
    Format the partition as NTFS.

  • Mouse pad virtual wheel not working in bookmarks menu

    Hi,
    My laptops mouse pad wheel does not work in the bookmarks menu. It works fine in any other application or on the main view in firefox. I'm not very organized and have hundreds of bookmarks, it's frustrating to have to wait for the up/down buttons in the bookmarks menu to scroll.
    I've read https://support.mozilla.com/en-US/kb/Cannot+scroll+with+mouse+wheel+or+touchpad
    which did not work.
    Here are my specs. I won't dump the entire dxdiag, I'm sure there's a lot of redundant info. in it.
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
    System Information
    Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
    Language: English (Regional Setting: English)
    System Manufacturer: Gateway
    System Model: NV53
    BIOS: Ver 1.00PARTTBL]
    Processor: AMD Athlon(tm) II Dual-Core M300 (2 CPUs), ~2.0GHz
    Memory: 4096MB RAM
    Available OS Memory: 3838MB RAM
    Page File: 1489MB used, 6185MB available
    Windows Dir: C:\windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7600.16385 32bit Unicode
    DxDiag Notes
    Display Tab 1: No problems found.
    Sound Tab 1: No problems found.
    Sound Tab 2: No problems found.
    Input Tab: No problems found.
    DirectInput Devices
    Device Name: Mouse
    Attached: 1
    Controller ID: n/a
    Vendor/Product ID: n/a
    FF Driver: n/a
    Device Name: Keyboard
    Attached: 1
    Controller ID: n/a
    Vendor/Product ID: n/a
    FF Driver: n/a
    Poll w/ Interrupt: No
    USB Devices
    + USB Root Hub
    | Vendor/Product ID: 0x1002, 0x4397
    | Matching Device ID: usb\root_hub
    | Service: usbhub
    Gameport Devices
    PS/2 Devices
    + Launch Manager
    | Matching Device ID: *pnp0303
    | Upper Filters: DKbFltr
    | Service: i8042prt
    |
    + Terminal Server Keyboard Driver
    | Matching Device ID: root\rdp_kbd
    | Upper Filters: kbdclass
    | Service: TermDD
    |
    + Alps Pointing-device
    | Matching Device ID: *pnp0f13
    | Upper Filters: ApfiltrService
    | Service: i8042prt
    |
    + Terminal Server Mouse Driver
    | Matching Device ID: root\rdp_mou
    | Upper Filters: mouclass
    | Service: TermDD

    Maybe FCP 3 doesn't provide support for mouse wheel scrolling? I can't remember and I'm not going to install FCP 3 to test that theory.
    You should be able to at least set the MS mouse driver to perform scroll wheel functions in FCP through the MS mouse preference pane (zoom in/out for example) but I don't know if that includes scrolling.

  • TS2662 my new magic mouse scrolling & swiping will not work

    my new magic mouse scrolling & swiping will not work. Help??

    I had this happen to me as well. just last week (july 28, 2014) I brought my magic mouse from home to work since my work mouse was going south. paired it with bluetooth, it moved and clicked but no scroll or gestures. searched till I nearly ready to give up. then I installed USB overdrive. many forum posts said too remove that. I didn't have it, so I installed it. and then un-installed it.  everything works great now.
    hope this helps someone.

  • My iMac mouse right click does not work now

    Hi all,
    My iMac mouse right click does not work now.  It was fine a couple of days ago. 
    Right click is definitely enabled, I have checked it several times.
    A Google search revealed that in Firefox it could be that I'm not using the latest version of Firebug.  I have auto updates on and Firebug is the latest version 1.11.3
    I use right click for correcting spell checked words, instead of a suggested correct spelling I get the 'open in a new tab' menu.
    In Firefox when I right click to open in a new tab I get the menu but it does nothing.
    It is driving me mad
    Any help will be greatly appreciated,
    Thank you
    P.S. thought it was suddenly working when I did the spell check in this post but it was the left click doign it....

    I don't use Firefox so I can't test it, but it might be something to do with a preference setting. Have a look at this link (ignore all the instructions), just look at the image of the preferences, there appears to be a setting in Javascript preferences relating to contextual menus. Check to see what your settings are:
    http://stackoverflow.com/questions/16377381/disable-firefoxs-silly-right-click-c ontext-menu

  • I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE HIS PROBLEM

    I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE THIS PROBLEM

    Have you tried going to System Preferences>Mouse and making sure that right click is set to secondary click?

  • I AM USING KEYBOARD WITHOUT MOUSE AND LETTER "H" NOT WORKING

    I AM USING KEYBOARD WITH NO MOUSE AND LETTER "H" NOT WORKING
    DOES SOMEONE KNOWS WHAT CAN BE DONE.
    THANK YOU
    MARIA

    I saw this issue before where cause was a bad preference for another application.
    When I had the "can't type Shift H" problem in Entourage, it was a corrupt preference for FlightCheck, a preflighting program I use in conjuction with QuarkXPress that was the culprit.
    First determine if the problem is in your User’s folder by creating a new User in System Preferences and test for the problem there. If it goes away then you know the problem is in your User’s folder.
    Use new User to test for problems
    Let us know the results

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • Is there a separate download for iMac.  I bought and downloaded what I thought was the right download but it is not working and feel it might be a windows version.  How doe I get it right

    s there a separate download for iMac.  I bought and downloaded what I thought was the right download but not working and feel it might be a windows version.  How doe I get it right

    Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

    The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • HT4623 I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....

    I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....Any advice appreciated.

    give us more to work with in terms of info then "basically does not work any more"
    it can be from it's on fire to the a key on the onscreen keyboard don't respond

  • Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows through parallels.

    Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows XP through parallels desktop.

    Hello...
    It seems I got it fixed!! I had been trying the Fixit tool from
    http://support.microsoft.com/kb/306759  while typing up there :))))
    This tool is for changing RDP port but running it fixed my problem (I kept the port 3389 intact)!!
    Hope it helps someone.

  • TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

    This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
    I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

    I did all that HT1925 recommended and it was no help.  My computer still won't recognize my iPhone.  Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

  • Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem.

    Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and the software update itself. The itunes version is 10.3.1

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Maybe you are looking for

  • Ipod touch 2nd generation, won't charge but it will still sync with itunes

    Everything works except it wont charge. it has the 'done charging symbol' in the battery except its pretty much dead. i know its not a bad usb port or anything because you can still put songs on it and stuff. now it just keeps switching from charging

  • 'Use Temporary File' in Receiver File channel

    hi all, I am facing a strange issue with receiver file channel which I am not sure if somene had already faced. I couldnt find any help from blogs..! I have configured the Receiver File channel with Write mode as  'Use Temporary File'  with a tempora

  • SAP DMS - Document Management System

    Hi All, pls can you help me i want to create  document  using tcode cv0n1 it is used to create document i want step by step how to create it thanks mars

  • Can I change the text-quoting "pipe" to another character?

    The 'pipe' makes it hard for me to format quoted text, so I want to change it to the good ol' greater-than sign. I've read that a recipient will see the greater-than sign in their message, but I want to see it on my screen when composing a reply. Tha

  • Joining/hosting problems with two particular peopl...

    I have a skype issue with just this one particular person, where if I or the particular person try to host a group call, the other person can't join and experience no sound, then get kicked out of the call. Rejoining didn't work, uninstalling didn't