Option in modifing the line iteam

HI,
once the master record is created, and saved, can it modified, iits line, iteam, while posting, request for line item to be activate,is any alternatie or defualt available.
regards
parashar

Hi Nitin
You can activate the open item management on the GL Account. If the GL has already been posted you need to make the balance of the a/c as zero, block it for postings and activate open Item management through FS00. Then bring the account to actual position. If you are in ECC 6.0 (EHP4), this can be done using FAGL_ACTIVATE_OP (Activate Open Item Management for Accounts Managed on Line Item Basis) provided the line item is activated for this account and no ledger specific posting are done.
Warm Regards
Nitika

Similar Messages

Where is the line tool in Elements 12? I used this a lot in Elements 7.

I cannot find the line tool in Elements 12. I cannot draw lines with arrows at all. Does anyone know what happened?

craig
Are you using Premiere Elements 12 or Photoshop Elements 12? And, on what computer operating system is the program running?
If you are talking about Premiere Elements 12/12.1, there is a line tool in the Shape section of the program's Titler. No arrows however unless
you try to draw them in with additional maneuvers of the line tool there.
If you are referring to the line tool in Photoshop Elements 12. The line tool is in with a group of tools.
In the screenshot, look to where I have the red arrow pointing in the toolbox. If it is not displaying there as the line tool, then click on it, which brings up the Options Bar for that tools group. Then select line tool in that Options Bar. The line tool options will be displayed in the Option Bar.
In the above screenshot, the custom shape tool was showing originally in the toolbox, with its options in the Options Bar. And, I next clicked on the line tool in the Options
Bar to use change the choice to use it and its options..
Photoshop Elements questions should be posted in the Adobe Photoshop Elements Forum.
Photoshop Elements
Please let us know if the above worked for you.
Thanks.
ATR

How to make the cost center or WBS field optional for Vendor/customer line?

Dear experts:
Does anyone has the experience of releasing WBS or cost center fields to be optional for the customer or vendor line item?
I've tested in system, neither the field status control in GL account master data nor the FSG in posting key worked, I can't let the WBS field to display in the screen and ready for input.
So my conclusion is that the FSG control in not completely effective for customer/vendor line, it there any other method to let WBS to be optional in custer/vendor line items?
Our purpose for changing that is that we're using joint venture accounting, we need to let users to input a cost object for system to derive joint venture information. please do not suggest deriving JV information using other methods, because we're dealing with a special case, i.g. in a cross-company document, only a customer/vendor line in our company, so it's impossible to split JV information from offset lines, anyway, please help me out directly with my issue.

Hi, Lu:
If I understand your question correctly, you want to modify the FSG of recociliation account of Vendor/Customer to make sure Cost Center/WBS field display in transaction F-22/F-43 for example, right?
I am not sure whether it is possible, I also tried in ECC6.0 but failed to show these two fields. And I think that doesn't make sense to assign CO object to AP/AR reconciliation account, but assign it to Revenue/Expense account in following line items.
And You can use New General Ledger functionality Document Splitting to derive corresponding CO object information to Reconciliation Account line item, but it is enabled only in General Ledger level, not in subledger level.
If you find any other meaningful solution, please also share with us.
Thanks & BR, Lawrence

Acrobat X: Option to hide the dotted line in between pages when viewing in 2 page view?

Acrobat X: Anyone know if there is an option to hide the dotted line in between pages when viewing in 2 page view? So that the 2 pages can look seemlessly joined, with no gap and no dotted line? This would be useful when viewing PDF magazines or books in which 2 pages join for a larger picture.

Create a Page 0 item which will be available on all pages.OMG yes I can use items in page 0 ! I should have think of that :/ Shame on me.
Application item values can be set from JavaScript using AJAX and an On-Demand Process.Yes I already tried ajax with ODP, my getappitem() function works but my setappitem() function won't assign value to application item, but it's not a problem now, I removed the ajax part and I will use page items :D
Thank you fac586.
Yann.

Any way to hide the Option CLASS in the sales order line

Any way to hide the Option CLASSes in the sales order line ? Not thru personalization .and also is there a way to explode the model automatically when we open the sales order form and line details ,rather than going to Tool--Show details everytime

1) Don't know.
2) Set "OM: Show Line Details" profile option to Yes.
Hope this helps,
Sandeep Gandhi

Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.

Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.

You will need to find a forum for MS Word since that is the software that you are trying to manipulate in this. If you think the processing/creation of the PDF plays a role then you should ask in the forum for the software that you are using to create the PDF.
This forum is for issue regarding downloading and installing Adobe trial products, so in any circumstance, your issue does not fit in this forum.

Can i use the char (defined as line iteam dim) in Aggregates

Hi
I am maintaining aggregates on cube. can i use char which is defined as line iteam dimenstion.if i use how will be the effect.
thanks
Shaliny

Hi,
of course you can use it!
The behaviour is the same than with the other characteristics: you will have as many records as DISTINCT ocurrences of the combination of all CHARS you have included in your aggregate.
I suggest to first create your aggregate with a fixed value on another characteristic so you can have a feeling about how many records it will have and how long it will take to create it.
In general if you have flagged your char in a line itm DIM it means that this CHAR has very high cardinality (nearly the same number of records than the fact table itself) therefore it wouldn't make sense to include it in a ggregate except if your filter it for particluar fixed value.
The only difference you have with this line itm DIM is that there is no DIM table as such; the chars is accessed firectly from the cube fact(s) table. This will be the same for your aggregate (no aggr dim table created, access form your aggr fact(s) tables).
hoping this help...
Olivier.

Does anyone ever get a human being when calling prepaid support at 888-294-6804?an stay on the line, but it just keeps repeating the menu options and eventually hangs up on me. That is really irrita

Does anyone ever get a human being when calling prepaid support at 888-294-6804? It tells me call volumes are higher then normal and I can stay on the line, but it just keeps repeating the menu options and eventually hangs up on me. That is really irritating!! I'd at least like the option to wait on hold. I guess I should have listened to the warnings about prepaid support before switching to prepaid last week.
The reason I'm calling support is I'd like to know when I will be getting the extra 500MB of data when signing up for auto pay. This is one of the reasons I switched to a 4G Allset plan. I signed up for auto pay promptly after setting up my online account when I switched from post paid to pre paid on Thursday July 17, 2014.

I'm sorry you are having trouble reaching a representative, mhaider60. When calling our Prepaid department you can reach a representative using the following number and prompts: 888-294-6804 when prompted, select 4, 6, and 4 to reach a representative.
AndreaS_VZW
Follow us on Twitter @VZWSupport

How to get the change mode option for the line items in SC

Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.

Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.

How to add the line items while running the VA01

HI All,
I want to add the line items while I am running the VA01 t-code(In run time).Could anybody give the FM to create the line items....Its urgent

Hi ,
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
regards
P.

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

I have a 6 month old top of the line iPad 4 I can't figure out. IN ANY WAY!

Today I get in my emal something about refunds for people whose children have charges up apps to my account with iTunes. Well I can't even find WHERE on my iPAD I have the icon FOR iTUNES! I see people show it as a blue symbol with notes and it says iTunes. My iPad does NOT have that. YET when I try to go download it from the iTunes store it says that iTUNES came with my iPAD so where is it??
There is a RED emblum with a double note but it says MUSIC! Is that the same thing as the iTunes?
What is the task manager? And where you do find that?
I get no answers on anything as to how to work this thing and it is extremely upsetting. I paid $1,200 for this iPad and my husband paid the same amount and got a REALLY NICE DELL and I have this thing I can't even use! Then on top of it when you write something like this you get an email from the Apple/ Mac people saying they took your post off because it was not positive enough for them - so how do you find out anything?
Aloha Antoinette

islandantoinette wrote:
Today I get in my emal something about refunds for people whose children have charges up apps to my account with iTunes. Well I can't even find WHERE on my iPAD I have the icon FOR iTUNES!
islandantoinette here is a copy of Apple's email (click the image below to enlarge it):
The operative words are "Check your email for iTunes receipts or use a computer to sign in to your iTunes account ..."
I trust that answers that question.
What is the task manager?
An iPad has no such thing. It has no Start button either. You can draw no comparison to a Windows PC because an iPad isn't a Windows PC; it's an entirely different category of product. It's like comparing a microwave oven to a barbecue grill - they both cook stuff, but that's where the comparisons end. If you want a Windows PC there are plenty of cheap things from which to choose for which you must tolerate ctrl-alt-del when you log in every time, among other indignities. PCs have had well over a quarter century of refinement, so you'll know what to expect.
I have seen everyone from nonagenarians to two - year olds pick up an iPad and use it in seconds. Literally. I can't say the same about any PC. Both iOS devices as well as Macs also incorporate a robust range of accessibility options to accommodate people with limited sight, hearing, or other challenges both physical and mental. I understand your frustration with learning to use a radically new and different device, but it seems to me anyone in your circumstance given a PC for the first time would be facing a practically insurmountable challenge. Besides, wouldn't be worth the effort since the popularity of PCs is diminishing rapidly in the face of iOS devices the market clearly prefers.
I'm still trying to understand how it was possible to spend $1200 on a top of the line iPad whose suggested retail price could not have exceeded $929. If you purchased AppleCare+ that would add $99. Sales taxes would have had to be 17% for your total purchase price to be $1200. Is that correct?
The reason for asking is that if you purchased AppleCare, complimentary customer support regarding any subject is extended beyond the initial 90 days for the duration of the AppleCare agreement. You can call AppleCare and discuss any iPad-related subject with them at length, at no additional cost. You will find Apple's representatives incredibly patient and will work with you for as long as possible, weeks or months if necessary, to resolve any question you may have with your iPad. No other company on Earth can come close to the quality of support that Apple offers its customers.
The point is that you have many, many support options from which to choose. All you have to do is avail yourself of them.
Good luck.

How can you tell if the line has errors?

I'll try and keep this as brief as possible.
<background>
For 2years (up to 6months ago) I was on BE ADSL and was very impressed with the quality of the service (low latency, decent bandwidth) on my line. However when I heard that FTTC was being rolled out I switched to Zen internet on the understanding that I could then switch to the FTTC product as soon as it was available.
Immediately after switching to Zen I started to experience problems with VOIP (I use VOIP extensions against an externally hosted PBX) and was seeing CRC errors on the line. In the process (~2months) of getting this diagnosed the FTTC product became available and since I wanted uncapped switched to BT Infinity for Business Option 2.
</background>
I now find that again I get sporadic VOIP problems (but not as bad as on the ADSL2 service via Zen) but very regular BBC iPlayer dropouts listening to the radio.
Due to the previous problems whilst on ADSL2 I suspect I still have a minor line fault but as I can't access any stats on the line have no way to verify. Does anyone have any pointers on where to get line stats to see what is going on on the connection? I can't get any info out of the OR modem.
Regarding my network. I am using a cabled, gigabit connection directly to a Draytek 2820n which is in turn doing the PPPoE through the BT OR modem. I use two different machines and experience the same issues on both. I'm a server & network admin by trade so pretty sure it's not my internal infrastructure at fault.
My IP profile is apparently 38717 Kbps down / 10000 KBps up.
BT Speed tester shows achieved 26581 down and 4912 up though

jmansford,
I may be wrong about this as I am only refering to my own 2750n settings,but looking at your upload throughput test results some if not all of your problems could be due to a wrongly wieghted QoS setting and/or port capacity setting based on QoS.
As you line profile is ok at 38717 Kbps down / 10000 KBps up it looks like there is no problem on your actual line,but phone line noise test might find some crackle,but I don`t think so.
By your post,you say your are routing PPPoE through the Draytek into the OR modem.?
If so,maybe you could try leaving the OR or Draytek out of the chain as a process of testing where faults [if any] are.?
To sum up a bit imo leaving the OR modem out of the net chain might be a better way as I only use the 2750n on it`s own as the OR modem is not then needed.
Opps! sorry I might be wrong in my above thinking,but is your Draytek just a router or a modem/router combined like the 2750n.?
But either way the QoS setting are still important.

How to thicken the line in Line Chart?

Post Author: leongcy23
CA Forum: Charts and Graphs
I created a line chart and everything is smooth. But there is one thing that I'm not satisfied, which is I can't thicken the line of the chart. I try to look for Help, but it didn't show anything. From what I explore and try, I only can enlarge the marker, but not the line.
And another issue is, can I choose the color for the line? Because the report will auto generate the line with color that is not clear which is yellow which border me so much. I wonder is that I can choose the color of the line.
I really appreciate for someone that offer help. Thanks
Anson

Post Author: rcoleman
CA Forum: Charts and Graphs
What version of Crystal are you using? I can click on the line to highlight and then right click to get the option to format line. You can then choose color and line thickness. I'm using Crystal XI. It may take a few trys to highlight the line.. you have to hit it just right but I can't imagine this wasn't available in earlier versions.

Option in modifing the line iteam

Similar Messages

Maybe you are looking for