ORA-08002: sequence PSP_SEQ.CURRVAL is not yet defined in this session

Hi,
I have installed an application on a standalone PC.
I migrated it to my production environment and now I get this error.
In this situation I fill in a new record (but without showing first the records already available) : i.e only the second part of a form with a report and only with create- abilities.
It works well on my standalone PC.
What can be the reason ?
Any reaction will be appreciated.
Leo

You have to use nextval to get it current in your session.
If you just want to know the current value use the user_sequences data dictionary view
select last_number from user_sequences
where sequence_name = 'PSP_SEQ';Edited by: Keith Jamieson on Mar 18, 2009 4:28 PM
can't type correctly

Similar Messages

Sequence : .CURRVAL is not yet defined in this session

Hi ,
I had created a sequence with the name 'myseq' and used next function to retrieve the value.
But when used currval function
I am getting the following error:
sequence MYSEQ.CURRVAL is not yet defined in this session

898763 wrote:
Hi ,
I had created a sequence with the name 'myseq' and used next function to retrieve the value.
But when used currval function
I am getting the following error:
sequence MYSEQ.CURRVAL is not yet defined in this sessionYou don't need currval. The typical scenario is either to use the sequence value and store it in a variable. Then reuse this variable. Or better insert into a table that has a db trigger that fills the ID column from the sequence. In the latter case you would use the returning clause to fetch the new ID value.
example pl/sql code
declare
v_empno ename%empno%type;
begin
/* the empno column is filled by a DB-Trigger from a seqeunce */
insert into emp (ename)
values ('Ellison')
returning empno into v_empno;
/* do more stuff here, using the variable v_empno */
end;
/

Sequence is not yet defined in this session

Hello everybody
I have package, that contain some steps. I create batch log in the start (using BATCH.nextval sequence) and to close batch log in the end (using BATCH.currval sequence) of package, also after each step of the package I create batch_process log (using BATCH.currval and BATCH_PROCESS.nextval sequences). Log works fine, if the package status is "SUCCESS".
But when I get an error through any step, I try to create errored batch_process log (using BATCH.currval and BATCH.nextval sequences) and to close batch log (using BATCH.currval sequence) with error also. So, when I try to create errored batch_process log, T get an error: BATCH.CURRVAL is not yet defined in this session.
Help, please, to solve this error.
Best regards

Are you trying to handle the error in a scenario and accessing batch.currval from within that scenario ?
If that is the case, then you need to know that each scenario creates its own session and connection to the DB. So, the currval becomes undefined within that session.

Is not defined in this session

SELECT cycle_flag, sequence_name FROM ALL_SEQUENCES
I picked 'record_SEQ' sequence from the listing.
select record_SEQ.Currval from dual; ==> ORA-08002: sequence record_SEQ.Currval is not defined in this session.
where is the problem ?

As per the link you posted it says , this error comes up when there is no value >...but I can see the last value in the sequence is 20632 (using TOAD's sequence tab and highlight the particular sequence).
So, This error is confusing
Total Questions: 3 (3 unresolved) ?????one answered and Marked as answered.
Edited by: user575089 on Dec 23, 2009 12:47 AM

ORA-16821: logical standby database dictionary not yet loaded

Dear all,
I have a dataguard architecture with a primary and a standby database (for reporting stuffs). Since I upgraded physical standby to logical standby, I receive this error !
ORA-16821: logical standby database dictionary not yet loaded
If someone has an idea, should be great !!
Thanks
oldschool

Hi,
Ok I applied :
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Database altered.
SQL> alter database start logical standby apply immediate;
Database altered.
SQL>
And now I received this :
ORA-16825: Fast-Start Failover and other errors or warnings detected for the database
Cause: The broker has detected multiple errors or warnings for the database. At least one of the detected errors or warnings may prevent a Fast-Start Failover from occurring.
Action: Check the StatusReport monitorable property of the database specified.
What does it mean to check the status report.....
I found this about monitorable status report !!
DGMGRL> show database 'M3RPT' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16821: logical standby database dictionary not yet loaded
DGMGRL>
What can I do ?
Thanks a lot
oldschool
Edited by: oldschool on Jun 4, 2009 2:37 AM

ORA-24123: feature IOT support is not yet implemented

Hi,
in 10G R2 when using DBMS_REPAIR
I receive :
ORA-24123: feature IOT support is not yet implemented
ORA-06512: at "SYS.DBMS_REPAIR", line 293
How should I implement SYS.DBMS_REPAIR ?
Thank you.

on one tablespace is ok;
SET SERVEROUTPUT ON;
declare
V_SCHEMA VARCHAR2(20) :='GDJF';
V_NUM NUMBER :=0;
V_MAX NUMBER :=0;
BEGIN
SELECT MAX(LENGTH(TABLE_NAME)) INTO V_MAX FROM DBA_TABLES
WHERE OWNER = V_SCHEMA;
FOR T IN (SELECT TABLE_NAME FROM
DBA_TABLES
WHERE OWNER=V_SCHEMA
AND TABLESPACE_NAME = 'CRM_DATA')
LOOP
dbms_repair.check_object(
SCHEMA_NAME=>V_SCHEMA,
OBJECT_NAME=>T.TABLE_NAME,
REPAIR_TABLE_NAME=>'REPAIR_TABLE',
CORRUPT_COUNT=>V_NUM);
DBMS_OUTPUT.put_line('TABLE_NAME: '||
RPAD(T.TABLE_NAME,V_MAX, ' ') ||
' -CORRUPTED BLOCKS : ' ||V_NUM
END LOOP;
END;
/

" . . . product is not yet supported by this online service"

I need support for my new iMac and get this when entering my serial number: " . . . product is not yet supported by this online service." Please tell me what went wrong and how to get support. I chatted with them yesterday and we did a restore. Since it took a couple of hours, I thought that I would return today to finish the issues.

I need support for my new iMac and get this when entering my serial number: " . . . product is not yet supported by this online service." Please tell me what went wrong and how to get support. I chatted with them yesterday and we did a restore. Since it took a couple of hours, I thought that I would return today to finish the issues.

Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context

Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context
What Transparent Gateway (TG) 11g configuration steps prevent the following errors?:
a) ORA-12704: character set mismatch
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
Hints:
The current 9i TG works with the existing views and packages. These same db objects will not compile using the new 11g TG.
The db objects are on an Oracle 10g database linked to an SQL Server 2008 R2 database.
Since the 9i TG works I assume a configuration to the 11g TG will get it working same as before. But what...
Is is something controlled by these parameters? (Sorry, I don't know how this stuff works. I'm the application developer. My DBAs setup the Transparent Gateways.):
Parameters in the Gateway Startup Shell script:
    ORA_NLS33
    NLS_LANG
Parameters in the initsid.ora file:
    HS_LANGUAGE
    HS_NLS_DATE_FORMAT
    HS_NLS_DATE_LANGUAGE
I'm avoiding the known workaround to refactor the VIEWS and PACKAGES to contain CAST() statements to explicitly match the data types. A server side fix to the 11g TG is preferred.
Sample code:
a) ORA-12704: character set mismatch
   ... is caused by SQL that works with my 9i TG but not with my 11g TG. It's a snippit from my view that won't compile:
                  select status_code                  -- Oracle VARCHAR2(30)
                  from   ora_app_interfaces
                 UNION
                  select "StatusCode" as status_code -- SQL Server NVARCHAR(30)
                  from   SqlAppInterfaces
   Example workaround that I'm avoiding:
                  select status_code
                  from   ora_app_interfaces
                 UNION
                  select CAST("StatusCode" as VARCHAR(30)) as status_code
                  from   SqlAppInterfaces
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
   A line of code in the procedure that compiles correctly but fails to execute:
           -- Insert into SQL Server from Oracle
           insert into PatientMedRecNum (
              "PatID",         -- SQL Server INT
              "MedRecNum",     -- SQL Server NVARCHAR(11)
              "Hospital")      -- SQL Server NVARCHAR(30)
           values (
              pi_pat_id,       -- Oracle NUMBER
              pi_med_rec_num, -- Oracle VARCHAR2
              pi_hospital);    -- Oracle VARCHAR2
I'd guess the errors are caused by the TG's implicit conversion between the Oracle VARCHAR2 and the SQL Server NVARCHAR... but this works fine on the 9i TG... how do I set it up to work on the 11g TG?
Thanks!

Trace of 11g TG... generating errors due to lack of automatic mapping from SQL NVARCHAR to Oracle NVARCHAR, where the previous 9g TG mapped from SQL NVARCHAR to Oracle VARCHAR2.
Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
Heterogeneous Agent Release
11.2.0.4.0
Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
Version 11.2.0.4.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
setting HS_FDS_ARRAY_EXEC to default of "TRUE"
Exiting hgosdip, rc=0
ORACLE_SID is "xxxDEV"
Product-Info:
Port Rls/Upd:4/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.2.0.4.0_0019, Instance:xxxDEV
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HS_LANGUAGE not specified
rc=1239980 attempting to get LANG environment variable.
HOCXU_SEM_VER=102000
Entered hgolofn at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "PATH"
Setting PATH to "C:\oracle\product\11.2.0\tg_2\dg4msql\driver\lib"
Exiting hgolofn, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2014/09/22-13:35:08
Entered hgolgon at 2014/09/22-13:35:08
reco:0, name:abaccess, tflag:0
Entered hgosuec at 2014/09/22-13:35:08
uencoding=UTF16
Entered shgosuec at 2014/09/22-13:35:08
Exiting shgosuec, rc=0 at 2014/09/22-13:35:08
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
HOSGIP for "HS_FDS_DEFAULT_OWNER" returned "dbo"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2014/09/22-13:35:08
HS_FDS_CONNECT_INFO = "sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2014/09/22-13:35:08
dsn: sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV, name:xxx_admin
optn:
Entered hgocip at 2014/09/22-13:35:08
dsn:sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV
Exiting hgocip, rc=0 at 2014/09/22-13:35:08
Entered shgogohn at 2014/09/22-13:35:08
ohn is 'OraGtw11g_home2'
Exiting shgogohn, rc=0 at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "HS_FDS_ENCRYPT_SESSION"
using 0 as default value for "HS_FDS_ENCRYPT_SESSION"
RC=-1 from HOSGIP for "HS_FDS_VALIDATE_SERVER_CERT"
using 1 as default value for "HS_FDS_VALIDATE_SERVER_CERT"
Entered hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Exiting hgogenconstr, rc=0 at 2014/09/22-13:35:08
Entered hgopoer at 2014/09/22-13:35:08
hgopoer, line 231: got native error 5701 and sqlstate 01000; message follows...
[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed database context to 'Xxx_XXX_DEV'. {01000,NativeErr = 5701}[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed language setting to us_english. {01000,NativeErr = 5703}
Exiting hgopoer, rc=0 at 2014/09/22-13:35:08
hgocont, line 2764: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2014/09/22-13:35:08
Exiting hgolosf, rc=0 at 2014/09/22-13:35:08
DriverName:HGmsss23.dll, DriverVer:07.01.0093 (B0098, U0065)
DBMS Name:Microsoft SQL Server, DBMS Version:10.00.2531
Exiting hgocont, rc=0 at 2014/09/22-13:35:08 with error ptr FILE:hgocont.c LINE:2764 ID:SQLDriverConnect
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2014/09/22-13:35:08
Entered hgoulcp at 2014/09/22-13:35:08
Entered hgowlst at 2014/09/22-13:35:08
Exiting hgowlst, rc=1 at 2014/09/22-13:35:08
SQLGetInfo returns Y for SQL_PROCEDURES
SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
TXN Capable:2, Isolation Option:0xf
SQLGetInfo returns 128 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 134 for SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns " (0x22) for SQL_IDENTIFIER_QUOTE_CHAR
13 instance capabilities will be uploaded
capno:1992, context:0x0001ffff, add-info:        0
capno:3042, context:0x00000000, add-info:        0, translation:"42"
capno:3047, context:0x00000000, add-info:        0, translation:"57"
capno:3049, context:0x00000000, add-info:        0, translation:"59"
capno:3050, context:0x00000000, add-info:        0, translation:"60"
capno:3066, context:0x00000000, add-info:        0
capno:3067, context:0x00000000, add-info:        0
capno:3068, context:0x00000000, add-info:        0
capno:3069, context:0x00000000, add-info:        0
capno:3500, context:0x00000001, add-info:       91, translation:"42"
capno:3501, context:0x00000001, add-info:       93, translation:"57"
capno:3502, context:0x00000001, add-info:      107, translation:"59"
capno:3503, context:0x00000001, add-info:      110, translation:"60"
Exiting hgoulcp, rc=0 at 2014/09/22-13:35:08
Entered hgouldt at 2014/09/22-13:35:08
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2014/09/22-13:35:08
Entered hgobegn at 2014/09/22-13:35:08
tflag:0 , initial:1
hoi:0x12ee18, ttid (len 32) is ...
xxx
xxx
tbid (len 10) is ...
0: 09000F00 0FAC1E00 010A [..........]
Exiting hgobegn, rc=0 at 2014/09/22-13:35:08
Entered hgodtab at 2014/09/22-13:35:08
count:1
table: XXX_INTERFACE
Allocate hoada[0] @ 0000000005F58270
Entered hgopcda at 2014/09/22-13:35:08
Column:1(InterfaceID): dtype:2 (NUMERIC), prc/scl:20/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:2(TableName): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:3(TableID): dtype:4 (INTEGER), prc/scl:10/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:4(StatusCode): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:5(StatusTimestamp): dtype:93 (TIMESTAMP), prc/scl:23/3, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:6(InterfaceLog): dtype:-9 (WVARCHAR), prc/scl:400/0, nullbl:1, octet:800, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
The hoada for table XXX_INTERFACE follows...
hgodtab, line 1073: Printing hoada @ 0000000005F58270
MAX:6, ACTUAL:6, BRC:1, WHT=6 (TABLE_DESCRIBE)
hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x400:UNICODE_COLUMN)
DTY NULL-OK LEN MAXBUFLEN   PR/SC CST IND MOD NAME
3 DECIMAL N         22         22 20/ 0    0   0   0 InterfaceID
12 VARCHAR N         60         60 128/ 30 1000   0 440 TableName
4 INTEGER N          4 4   0/ 0    0   0   0 TableID
12 VARCHAR N         60         60 128/ 30 1000   0 440 StatusCode
91 DATE N         16         16 0/ 0    0   0   0 StatusTimestamp
12 VARCHAR Y        800        800 129/144 1000   0 440 InterfaceLog
Exiting hgodtab, rc=0 at 2014/09/22-13:35:08
Entered hgodafr, cursor id 0 at 2014/09/22-13:35:08
Free hoada @ 0000000005F58270
Exiting hgodafr, rc=0 at 2014/09/22-13:35:08
Entered hgotcis at 2014/09/22-13:35:08
Calling SQLStatistics for XXX_INTERFACE
IndexType=SQL_TABLE_STAT: cardinality=0
IndexType=1: PK_XXX_Interface
IndexType=3: IX_TableID
IndexType=3: IX_TableName
Calling SQLColumns for dbo.SQL_app_INTERFACE
#1 Column "InterfaceID": dtype=2, colsize=20, decdig=0, char_octet_length=0, cumulative avg row len=15
#2 Column "TableName": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=60
#3 Column "TableID": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=64
#4 Column "StatusCode": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=109
#5 Column "StatusTimestamp": dtype=93, colsize=23, decdig=3, char_octet_length=0, cumulative avg row len=125
#6 Column "InterfaceLog": dtype=-9, colsize=400, decdig=0, char_octet_length=800, cumulative avg row len=725
3 Index(es) found:
Index: PK_XXX_Interface, type=1, ASCENDING, UNIQUE, cardinality=0
#1 Column 1: InterfaceID
Index: IX_TableID, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 3: TableID
Index: IX_TableName, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 2: TableName
Exiting hgotcis, rc=0 at 2014/09/22-13:35:08

Structure not yet maintained for this combination of characteristics

Hi,
I have crated infor structure, maintained parameter. Created planning hierarchy also.
When I use transaction MC93 to create flexible plan, I am getting error message ""Structure not yet maintained for this combination of characteristics""
Please suggest to overcome this issue.
thanks and regards
murugesan

Dear Murugesan,
could you elaborate (explain in more detail) about the step you do to fix this issue?
right now i am encountering the same problem?
Thank you in advance for your help.

(HELP) ORA-27101: shared memory realm does not exist

Contributors,
I am a newbie in Oracle and have oracle database installed and working as expected until few days ago. One day i was getting these ugly messages when connecting via SQLplus
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session ID: 0 Serial number: 0I did some searches on this topic but haven't found solutions.
* Some suggested to check[b] environment variables ORACLE_HOME and ORACLE_SID : my ORACLE_HOME is fine, and i DO NOT have ORACLE_SID on the day i realize the problem.
I am not sure if ORACLE_SID variable is usually exist when my database was up and running. So i set ORACLE_SID yet did not help.
* Some said check if the required services are running :
- OracleOraDb11g_home1TNSListener : RUNNING
- OracleServiceORCL : RUNNING
* Other said that they have the same problem, but everything back to normal after several hours without anything configured / changed (miraculous)
* I tried to restart or shut down, but no luck
* In the same thread few days ago, Vlado helped me with suggestion to acces ADRCI and type SHOW PROBLEM also SHOW INCIDENT
but the reply is DIA-48494: ADR home is not set, the corresponding operation cannot be done* Other implied to check the .ora files in NETWORK\ADMIN. I will post it (TNSNAMES.ORA, LISTENER.ORA, SQLNET.ORA) after this.
My platform and some info :
* OS : MS Windows Vista Ultimate
* Oracle Database 11g Release 1 (11.1.0.6.0) Enterprise/ Standard Edition for Microsoft Windows 32-bit
Mostly i used SQLplus and SQLdeveloper, for developing procedures/ functions/ packages in Oracle Spatial.
Also, am running it in one laptop (server and client altogether).
There is only one database in the Laptop (no other oracle database).
How to fix this ? Please kindly help me.
Many thanks in advance,
Damon

Here are the ORA files :
( Btw the service name / SID is "orcl")
=====================================
TNSNAMES.ORA
# tnsnames.ora Network Configuration File: C:\ORACLE\product\11.1.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = geoltmatt)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
)=====================================
LISTENER.ORA
# listener.ora Network Configuration File: C:\ORACLE\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = geoltmatt)(PORT = 1521))
)=====================================
SQLNET.ORA
# sqlnet.ora Network Configuration File: C:\ORACLE\product\11.1.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)=====================================
also other said that we need to issue commands like
LSNRCTL STATUS
TNSPING [host]
Here they are :
LSNRCTL STATUS
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 22-MAY-2008 18:12
:46
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date                22-MAY-2008 12:03:17
Uptime                    0 days 6 hr. 9 min. 29 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\ORACLE\product\11.1.0\db_1\network\admin\listener.o
ra
Listener Log File         c:\oracle\product\11.1.0\db_1\log\diag\tnslsnr\geoltma
tt\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=geoltmatt)(PORT=1521)))
The listener supports no services
The command completed successfully
TNSPING [host]
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 22-MAY-2
008 18:14:15
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\ORACLE\product\11.1.0\db_1\network\admin\sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTO
COL=TCP)(HOST=128.250.171.197)(PORT=1521)))
OK (0 msec)Please kindly help me... (also thanks for vlado)
TIA.
=Damon

Currval is not shown

Hi all
i have a sequence
my_seq
and i wrote this on key-next-item
select my_seq into :sno from dual;
but it gives me error ora: 08002
plesae guide
thanks and regards
vikas

Try something like this...
SELECT SEQUENCE_NAME.NEXTVAL INTO :FIELD_NAME FROM DUAL;-Ammad

Field symbol has not yet been defined-ALV Grid Display in Report

Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O

ORA-01092: ORACLE instance terminated. Disconnection forced ORA-00942: table or view does not exist on 12C RAC

Hi Geeks,
I have encountered an issue while starting up my database on 12c RAC.
Till mount it goes fine but when i attempt to open it throws me an error.
Total System Global Area 1.5400E+10 bytes
Fixed Size                  4737560 bytes
Variable Size            2952791528 bytes
Database Buffers         1.2415E+10 bytes
Redo Buffers               26857472 bytes
Database mounted.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00942: table or view does not exist
Process ID: 11338068
Session ID: 1429 Serial number: 3
Here is the trace file output...
ORACLE_HOME = /oracle_home/app/orahome
System name:    AIX
Node name:      INS1
Release:        1
Version:        7
Machine:        00C8CCA74C00
Instance name: INST1
Redo thread mounted by this instance: 1
Oracle process number: 7
Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
*** 2014-11-27 22:49:20.892
*** SESSION ID:(197.5) 2014-11-27 22:49:20.892
*** CLIENT ID:() 2014-11-27 22:49:20.892
*** SERVICE NAME:() 2014-11-27 22:49:20.892
*** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
*** ACTION NAME:() 2014-11-27 22:49:20.892
2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
*** 2014-11-27 22:49:24.580
Successfully allocated 32 recovery slaves
Using 3 overflow buffers per recovery slave
*** 2014-11-27 22:49:24.740
Thread 1 checkpoint: logseq 15, block 2, scn 3510749
cache-low rba: logseq 15, block 3
    on-disk rba: logseq 15, block 72, scn 3510824
start recovery at logseq 15, block 3, scn 0
*** 2014-11-27 22:49:24.981
Started resilvering redo thread 1 seq 15 blocks 72-73
*** 2014-11-27 22:49:24.994
Completed resilvering redo thread 1 seq 15
*** 2014-11-27 22:49:24.994
Started writing zeroblks thread 1 seq 15 blocks 74-81
*** 2014-11-27 22:49:24.994
Completed writing zeroblks thread 1 seq 15
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
Longest record: 0Kb, moves: 0/104 (0%)
Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
Last redo scn: 0x0000.0035922b (3510827)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 151/176 = 0.9
*** 2014-11-27 22:49:25.007
KCRA: start recovery claims for 25 data blocks
*** 2014-11-27 22:49:25.039
KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
*** 2014-11-27 22:49:25.054
Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
*** 2014-11-27 22:49:25.060
Completed redo application of 0.02MB
*** 2014-11-27 22:49:25.235
Completed recovery checkpoint
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 176/176 = 1.0
Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
*** 2014-11-27 22:49:26.000
2014-11-27 22:49:26.000433 : Validate domain 0
2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
*** 2014-11-27 22:49:28.315
Count of ofsmtab$: 0 entries
*** 2014-11-27 22:49:28.732
ORA-00942: table or view does not exist
ORA-00942: table or view does not exist
*** 2014-11-27 22:49:28.738
USER (ospid: 20381876): terminating the instance due to error 942

In my case the issue has fixed by executing the following..
grant SELECT on SYS.USER$ to XDB;
grant SELECT on SYS.USER$ to CTXSYS;
grant SELECT on SYS.USER$ to DVSYS;
grant SELECT on SYS.USER$ to LBACSYS;
grant SELECT on SYS.USER$ to APEX_040200;
grant SELECT on SYS.USER$ to DV_SECANALYST;
Refer the above screen shot...

A newbie problem - Why 'ORA-00942: table or view does not exist'

Hi,
I am a newbie having a very basic problem.
I have just created a table by reading in a CSV file.
However when I try to SELECT from it, I get an error message saying :-
ORA-00942: table or view does not exist
How can this be when I can see the table name ?
I have tried a couple of things that I found in the Discussion Forum, like 'ALTER SCHEMA' and 'GRANT SELECT'.
Neither seemed sensible because I have just created a table, and sure enough, neither helped.
It's disappointing that something so basic can go wrong.
I will be very grateful for any advice.
Barry

This tool and forum is awesome. I'm a developer that was never touched HTMLDB and now with in a month I'm developing applications quickly and when I have a question I have this active forum to ask my sometimes stupid and othertimes valid questions! This is great! I don't know where you all find the time to help out so much!
It is a little addicting though... I find myself sitting down Saturday morning just to spend a couple of minutes reading the posts and next thing I know hours have gone by as I use what I read because I can't wait until Monday...
Thank you all for everything!!!! HTMLDB, APEX, Javascript and now in another post I'm learning about "Fine Grained Access Control" or "Virtual Private Database".
Enjoy, BillC :>)

ORA-01762: vopdrv: view query block not in FROM ????

Hi All
any one aware of the error.
ORA-01762: vopdrv: view query block not in FROM
Please reply back.

ORA-01762:vopdrv: view query block not in FROM
Cause:This is an internal error message not normally issued.
Action:Contact Oracle Support Services.
Edited by: Karthick_Arp on Sep 23, 2008 11:01 PM

ORA-08002: sequence PSP_SEQ.CURRVAL is not yet defined in this session

Similar Messages

Maybe you are looking for