ORA-6512: at "SYS.OWM_DDL_PKG" line 3228
I am using Oracle Workspace Manager Version 9.2.0.7, as my process
attempts to perform DBMS_WM.BeginDDL on a versioned table, i am getting the following error:
ORA-6512: at "SYS.OWM_DDL_PKG" line 3228
ORA-6512: at "SYS.LT", line 11831
ORA-6512: at line 1
Any suggestions on what might be the cause of this problem?
Thanks!!
No, I would need a lot more information to be able to determine what the cause of the problem is. Are you able to create a testcase that easily reproduces the problem ? If so, feel free to post it here, or create a TAR with the necessary information.
Regards,
Ben
Similar Messages
-
Receive ORA-06512 in SYS.OWM_DDL_PKG on DBMS_WM.BeginDDL call
I'm attempting to DBMS_WM.BeginDDL on a versioned table, and I receive the following:
ERROR at line 1:
ORA-06512: at "SYS.OWM_DDL_PKG", line 2569
ORA-06512: at "SYS.LT", line 11143
ORA-06512: at line 1
Any ideas on where this is coming from?
Thanks.Hi,
This could be a couple of things.
If the table has a domain index, make sure that the user has the 'create table' and 'create sequence' privileges.
If that is not the case, this is most likely one of a couple of issues with beginDDL that has already been identified and fixed in the workspace manager 9.2.0.3.0 release. This kit is available on Metalink.
Ben -
Upgrade oracle 9.2.0.8.0 to 10.2.03 ORA-06512: at "SYS.VERSION_SCRIPT", lin
Upgrade oracle 9.2.0.8.0 to 10.2.03. while runing catupgrd.sql script. i am geting error.
SELECT version_script AS file_name FROM DUAL
ERROR at line 1:
ORA-20000: Upgrade not supported from version
ORA-06512: at "SYS.VERSION_SCRIPT", line 52
Please help me.
ATStrange. Metalink doc 316889.1 says you should be able to upgrade following versions directly to 10.2.0.3.0
8.1.7.4 -> 10.2.X.X.X
9.0.1.4 or 9.0.1.5 -> 10.2.X.X.X
9.2.0.4 or higher -> 10.2.X.X.X
10.1.0.2 or higher -> 10.2.X.X.X
Not too sure but may be you need to contact Oracle support. -
Getting ORA-06512: at "SYS.UTL_HTTP", line 1022 ORA-29270: too many open
hi
I am getting the following error while calling the procedure in the batch process
ORA-06512: at "SYS.UTL_HTTP", line 1022
ORA-29270: too many open HTTP requests
Could you please help me on this? As this is getting affected in the live databases.
ORA-06512: at "SYS.UTL_HTTP", line 1022
ORA-29270: too many open HTTP requests
CREATE OR REPLACE PROCEDURE Send_To_Spg(
PTRANSACTION_ID IN VARCHAR2,
PCHANNEL_TYPE IN VARCHAR2 DEFAULT NULL,
PCSS_ORDER_NUMBER IN VARCHAR2 DEFAULT NULL,
PTELEPHONE_NUMBER IN VARCHAR2 DEFAULT NULL,
PSCENARIO_TYPE IN VARCHAR2 DEFAULT NULL,
PCUSTOMER_REQUIRED_DATE IN VARCHAR2 DEFAULT NULL,
PCUSTOMER_REQUIRED_TIME IN VARCHAR2 DEFAULT NULL,
PCANCELLATION_REASON IN VARCHAR2 DEFAULT NULL,
PCANCELLATION_NOTES IN VARCHAR2 DEFAULT NULL,
PSMPF_RETENTION IN VARCHAR2 DEFAULT NULL,
PEMERGENCY_WINBACK IN VARCHAR2 DEFAULT NULL,
PCSS_PROJECT_ID IN VARCHAR2 DEFAULT NULL,
PCSS_ORDER_NOTES IN VARCHAR2 DEFAULT NULL,
PREASON_FOR_CESSATION IN VARCHAR2 DEFAULT NULL,
P_RESPONSE OUT VARCHAR2,
PSMART_USER_ID IN VARCHAR2 DEFAULT NULL,
PORACLE_ERROR OUT VARCHAR2,
PORACLE_ERROR_MESSAGE OUT VARCHAR2,
PRESPONSE_TIME OUT NUMBER,
PDATA_TRANSFER_STATUS OUT VARCHAR2)
IS
v_scenario_type VARCHAR2(20); -- Varialble to Hold Time Out of every request to SPG
v_transaction_time NUMBER; -- Total time in which Request to SPG was processed
v_record_inserted_at DATE; -- Date/Time about the record insertion to the Error Handler
v_start_time NUMBER; -- Variable to hold Start Time for calculationg Transaction Time
v_url VARCHAR2(32767);-- URL to use when sending data to SPG
vtransaction_id VARCHAR2(18); -- Variable to hold Transaction ID for the request
v_buffer VARCHAR2(32760);-- Variable to read response from the SPG interface
v_timeout PLS_INTEGER; -- Time Out for each Transaction
v_oracle_err_msg VARCHAR2(600); -- Variable to hold Oracle Error Message
v_resp UTL_HTTP.RESP; -- Response Object
v_req UTL_HTTP.REQ; -- Request Object
v_userid_pwd SMT_ORACLE_PARAMETERS%ROWTYPE; --Variable declared to contain User ID & Password
vl_RetCode VARCHAR2(5000);
vl_std_returnCode VARCHAR2(3000);
--PDATA_TRANSFER_STATUS Holds the Data Transfer Status which can have possible values as
-- N => Data Has not been sent to SPG
-- Y => Received Successful response from SPG
-- F => On the First try to Send data to SPG Oracle Error Occured or response from SPG was a faulure
-- S => On the Second try to Send data to SPG Oracle Error Occured or response from SPG was a faulure
-- T => Data Has been transferred to the Error Log Table
-- X => Data need not be transfered to Error Log Table.
--Location of the timeout, URL & User Id & Password in Standing Data.
c_url_stopwlr SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_WLR';-- Stop WLR URL
c_url_cancelown SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_OWN';-- Cancel own URL
c_url_cancelother SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_OTH';-- Cancel other URL
c_url_amendcrd SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_CRD';--Amend CRD URL
c_spg_useridpwd SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPGIDPWD'; --Contains user id and pwd
ctimeout smt_parameters.parameter_code%TYPE:='SPGTO'; --This holds the timeout parameter
BEGIN
--In case the calling batch process can pass this value this SQL read will not be required & can be deleted
--Read data transfer status for the transaction Id
SELECT data_transfer_status INTO PDATA_TRANSFER_STATUS FROM SPG_INTERFACE_TABLE
WHERE transaction_id = PTRANSACTION_ID;
--Record the start time
v_start_time:=DBMS_UTILITY.GET_TIME;
--If Data transfer status is S then send the record to error handler
IF PDATA_TRANSFER_STATUS = 'S' THEN
Error_Handler(PTRANSACTION_ID,PSMART_USER_ID,PORACLE_ERROR,PORACLE_ERROR_MESSAGE,v_record_inserted_at,PDATA_TRANSFER_STATUS);
ELSE
--In case Data Tranfer Status is something other than S then send the request to SPG
--Initialise other variables which will be populated during the journey
P_RESPONSE := '';
PORACLE_ERROR := NULL;
PORACLE_ERROR_MESSAGE := NULL;
PRESPONSE_TIME := 0;
--Read timeout parameter from standing data.
BEGIN
SELECT VALUE INTO v_timeout FROM smt_parameters WHERE parameter_code=ctimeout;
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_timeout:=30;
WHEN OTHERS THEN
v_timeout:=30;
END;
-- Construct the URL for Stop WLR Scenario
IF PSCENARIO_TYPE = 'STOP_WLR' THEN
BEGIN
-- Read the Initial URL from Standing Data
SELECT VALUE
INTO v_url
FROM SMT_ORACLE_PARAMETERS
WHERE parameter_code = c_url_stopwlr
AND host_id = ( SELECT host_id
FROM SMART_HOSTS A
WHERE EXISTS ( SELECT 1
FROM DB_PARAMETERS b
WHERE A.hostname = b.hostname
AND A.database_id = b.database_id));
--handle unforseen exception
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_url:='Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_winback_details'; --After testing the same, URL will be fetched from the Query
WHEN OTHERS THEN
v_url:='Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_winback_details'; --After testing the same, URL will be fetched from the Query
END;
--construct the URL depending on the parameters to be passed to the url
v_url := v_url || '?';
v_url := v_url || 'p_data_entered=' || Smart_Urlencode('xmloverhttp') || '&';
v_url := v_url || 'p_channel_type=' || Smart_Urlencode(PCHANNEL_TYPE)|| '&';
v_url := v_url || 'p_css_start_order_no=' || Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
v_url := v_url || 'p_tel_no=' || Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
v_url := v_url || 'p_crd=' || Smart_Urlencode(PCUSTOMER_REQUIRED_DATE)|| '&';
v_url := v_url || 'p_take_over_time=' || Smart_Urlencode(PCUSTOMER_REQUIRED_TIME)|| '&';
v_url := v_url || 'p_retainsmpf=' || Smart_Urlencode(PSMPF_RETENTION)|| '&';
--v_url := v_url || 'p_emergency_winback=' || Smart_Urlencode(PEMERGENCY_WINBACK)|| '&';
v_url := v_url || 'p_projectno=' || Smart_Urlencode(PCSS_PROJECT_ID)|| '&';
v_url := v_url || 'p_ordernotes=' || Smart_Urlencode(PCSS_ORDER_NOTES)|| '&';
v_url := v_url || 'p_reason_cessation=' || Smart_Urlencode(PREASON_FOR_CESSATION);
ELSIF PSCENARIO_TYPE='CANCEL_OWN' THEN
--Fetch the URL for cancel own from standing data.
BEGIN
SELECT VALUE
INTO v_url
FROM SMT_ORACLE_PARAMETERS
WHERE parameter_code = c_url_cancelown
AND host_id = ( SELECT host_id
FROM SMART_HOSTS A
WHERE EXISTS ( SELECT 1
FROM DB_PARAMETERS b
WHERE A.hostname = b.hostname
AND A.database_id = b.database_id));
--handle unforseen exception
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelown_details'; --After testing the same, URL will be fetched from the Query
WHEN OTHERS THEN
v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelown_details'; --After testing the same, URL will be fetched from the Query
END;
--construct the URL
v_url := v_url || '?';
v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
v_url := v_url || 'p_css_start_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
v_url := v_url || 'p_cancel_reason=' ||Smart_Urlencode(PCANCELLATION_REASON)|| '&';
v_url:= v_url || 'p_cancel_notes=' ||Smart_Urlencode(PCANCELLATION_NOTES);
ELSIF PSCENARIO_TYPE='CANCEL_OTHER' THEN
--Fetch the URL for cancel own from standing data.
BEGIN
SELECT VALUE
INTO v_url
FROM SMT_ORACLE_PARAMETERS
WHERE parameter_code = c_url_cancelother
AND host_id = ( SELECT host_id
FROM SMART_HOSTS A
WHERE EXISTS ( SELECT 1
FROM DB_PARAMETERS b
WHERE A.hostname = b.hostname
AND A.database_id = b.database_id));
--handle unforseen exception
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelother_details'; --After testing the same, URL will be fetched from the Query
WHEN OTHERS THEN
v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelother_details'; --After testing the same, URL will be fetched from the Query
END;
--construct the URL
v_url := v_url || '?';
v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
v_url := v_url || 'p_css_stop_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
v_url := v_url || 'p_cancel_reason=' ||Smart_Urlencode(PCANCELLATION_REASON);
ELSIF Pscenario_type='AMEND_CRD' THEN
--Fetch the URL for cancel own from standing data.
BEGIN
SELECT VALUE
INTO v_url
FROM SMT_ORACLE_PARAMETERS
WHERE parameter_code = c_url_amendcrd
AND host_id = ( SELECT host_id
FROM SMART_HOSTS A
WHERE EXISTS ( SELECT 1
FROM DB_PARAMETERS b
WHERE A.hostname = b.hostname
AND A.database_id = b.database_id));
--handle unforseen exception
EXCEPTION
WHEN NO_DATA_FOUND THEN
v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_amendcrd_details'; -- After testing the same , URL will be fetched from the Query
WHEN OTHERS THEN
v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_amendcrd_details'; -- After testing the same , URL will be fetched from the Query
END;
--construct the URL
v_url := v_url || '?';
v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
v_url := v_url || 'p_css_start_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
v_url := v_url || 'p_crd=' ||Smart_Urlencode(PCUSTOMER_REQUIRED_DATE)|| '&';
v_url := v_url || 'p_css_change_order_numbers='||Smart_Urlencode(PCANCELLATION_REASON);
END IF;
--this is start of setting parameters for utl http object. the show begins...
utl_http.set_transfer_timeout(v_timeout);
--Set the wallet
--XXXXX e.g.UTL_HTTP.SET_WALLET(?file:DirectoryPath?,'put password here?);
--Set proxy
--YYYYY e.g. utl_http.set_proxy(p_proxy_in, p_no_proxy_domains_in);
v_url := REPLACE(v_url,'%27%27','%27'); -- Fix to ensure Double Quotes are converted to Single Quotes
--set the required URL to utl http.
v_req := utl_http.begin_request(v_url);
--Authentication setting
--Fetch the user id and password from stnding data.
BEGIN
SELECT *
INTO v_userid_pwd
FROM SMT_ORACLE_PARAMETERS
WHERE PARAMETER_CODE=c_spg_useridpwd
AND HOST_ID = ( SELECT HOST_ID
FROM SMART_HOSTS A
WHERE EXISTS ( SELECT 1
FROM DB_PARAMETERS B
WHERE A.HOSTNAME = B.HOSTNAME
AND A.DATABASE_ID = B.DATABASE_ID));
EXCEPTION
WHEN NO_DATA_FOUND THEN
P_RESPONSE := 'ORACLE_ERROR: USER id AND Password NOT configured IN SMT_ORACLE_PARAMETERS:SPGIDPWD';
WHEN OTHERS THEN
P_RESPONSE := 'ORACLE_ERROR: USER id AND Password NOT configured IN SMT_ORACLE_PARAMETERS:SPGIDPWD';
END;
--utl_http.set_authentication(v_req, p_username_in, p_password_in);
utl_http.set_authentication(v_req, v_userid_pwd.description, v_userid_pwd.VALUE);
v_resp := utl_http.get_response(v_req);
--Fill in the the response time
PRESPONSE_TIME := (DBMS_UTILITY.GET_TIME - v_start_time)/100;
IF v_resp.reason_phrase = 'OK' THEN
-- Fetch the response
BEGIN
LOOP
utl_http.read_line(v_resp, v_buffer);
P_RESPONSE := P_RESPONSE || v_buffer;
END LOOP;
utl_http.end_response(v_resp);
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(v_resp);
P_RESPONSE := P_RESPONSE || v_buffer;
END;
ELSIF v_resp.reason_phrase <> 'OK' OR P_RESPONSE = '' THEN
--error handling starts
--If the HTTP Status is not OK then store the error information
PORACLE_ERROR_MESSAGE := 'Status Code: '|| v_resp.STATUS_CODE||'. Reason Phrase ' ||v_resp.reason_phrase;
P_RESPONSE := 'ORACLE_ERROR: '|| ' Reason Phrase ' || v_resp.reason_phrase;
PORACLE_ERROR := v_resp.STATUS_CODE;
END IF;
--In case we got successful response from SPG
IF P_RESPONSE LIKE '%<RetCde>0</RetCde>%' THEN
PDATA_TRANSFER_STATUS := 'Y';
ELSE
BEGIN
SELECT message
INTO vl_std_returnCode
FROM SMT_MESSAGES
WHERE MESSAGE_CODE='SPGANTIDTS';
EXCEPTION
WHEN NO_DATA_FOUND THEN
vl_std_returnCode := '-12545,-29273,-1,401,';
WHEN OTHERS THEN
vl_std_returnCode := '-12545,-29273,-1,401,';
END;
--In case there was an error do not update Data Transfer Status
IF PORACLE_ERROR <> NULL AND INSTR(vl_std_returnCode, PORACLE_ERROR || ',', 1, 1) <> 0 THEN
PDATA_TRANSFER_STATUS:=PDATA_TRANSFER_STATUS;
ELSE
vl_RetCode := SUBSTR(P_RESPONSE, INSTR(P_RESPONSE,'<RetCde>', 1, 1),
INSTR(P_RESPONSE,'</RetCde>',1,1)+9 - INSTR(P_RESPONSE,'<RetCde>', 1, 1));
BEGIN
SELECT VALUE
INTO vl_std_returnCode
FROM SMT_ORACLE_PARAMETERS
WHERE PARAMETER_CODE='SPGRCS'
AND HOST_ID = ( SELECT HOST_ID
FROM SMART_HOSTS A
WHERE EXISTS ( SELECT 1
FROM DB_PARAMETERS B
WHERE A.HOSTNAME = B.HOSTNAME
AND A.DATABASE_ID = B.DATABASE_ID));
EXCEPTION
WHEN NO_DATA_FOUND THEN
vl_std_returnCode := '<RetCde>4244</RetCde><RetCde>4245</RetCde><RetCde>4246</RetCde>';
WHEN OTHERS THEN
vl_std_returnCode := '<RetCde>4244</RetCde><RetCde>4245</RetCde><RetCde>4246</RetCde>';
END;
IF INSTR(vl_std_returnCode, vl_RetCode, 1, 1) <> 0 THEN
--needs not to re attempted.
PDATA_TRANSFER_STATUS:='X';
ELSE
--In case we did'nt got SUCCESSFUL response FROM SPG THEN UPDATE the Data Transfer Status so that the failed requests can be picked up BY the NEXT batch job RUN
IF PDATA_TRANSFER_STATUS='N' THEN
--initially if data transfer status was N then update it now to F
PDATA_TRANSFER_STATUS := 'F';
ELSIF PDATA_TRANSFER_STATUS='F' THEN
--initially if data transfer status was N then update it now to S
PDATA_TRANSFER_STATUS := 'S';
END IF;
END IF;
END IF;
END IF;
--Now Update all the modified Values
UPDATE SPG_INTERFACE_TABLE
SET response = P_RESPONSE,
data_transfer_status = PDATA_TRANSFER_STATUS,
oracle_error = PORACLE_ERROR,
oracle_error_message = PORACLE_ERROR_MESSAGE,
response_time = PRESPONSE_TIME
WHERE transaction_id = PTRANSACTION_ID;
COMMIT;
END IF;
EXCEPTION
WHEN OTHERS THEN
--Handling the unhandled exception
PORACLE_ERROR := SQLCODE;
PORACLE_ERROR_MESSAGE := SQLERRM;
P_RESPONSE := 'ORACLE_ERROR: '|| PORACLE_ERROR_MESSAGE;
PRESPONSE_TIME := (DBMS_UTILITY.GET_TIME - v_start_time)/100;
SELECT data_transfer_status INTO PDATA_TRANSFER_STATUS
FROM SPG_INTERFACE_TABLE
WHERE transaction_id=PTRANSACTION_ID;
--New functionality to update the oracle error and oracle error message and not the Data Transfer Status
BEGIN
SELECT message
INTO vl_std_returnCode
FROM SMT_MESSAGES
WHERE MESSAGE_CODE='SPGANTIDTS';
EXCEPTION
WHEN NO_DATA_FOUND THEN
vl_std_returnCode := '-12545,-29273,-1,';
WHEN OTHERS THEN
vl_std_returnCode := '-12545,-29273,-1,';
END;
vl_RetCode := PORACLE_ERROR || ',';
IF INSTR(vl_std_returnCode, vl_RetCode, 1, 1) <> 0 THEN
--If the error is found in above maintained standing data do not change the Data Transfer Status
pdata_transfer_status:=pdata_transfer_status;
ELSE
IF pdata_transfer_status='N' THEN
PDATA_TRANSFER_STATUS := 'F';
DBMS_OUTPUT.PUT_LINE('DUE TO ERROR DATA COULDN''T GET TRANSFERED TO SPG FOR TRANSACTION'||' '||PTRANSACTION_ID);
DBMS_OUTPUT.PUT_LINE(SQLERRM);
ELSIF pdata_transfer_status='F' THEN
PDATA_TRANSFER_STATUS := 'S';
DBMS_OUTPUT.PUT_LINE('DUE TO ERROR DATA COULDN''T GET TRANSFERED TO SPG FOR TRANSACTION'||' '||PTRANSACTION_ID);
DBMS_OUTPUT.PUT_LINE(SQLERRM);
ELSE
DBMS_OUTPUT.PUT_LINE('Failure WHEN sending data TO Error LOG. Data Transfer Status IS ' || PDATA_TRANSFER_STATUS || '. TRANSACTION ID '|| PTRANSACTION_ID);
END IF;
END IF;
--Now update all the information gathered above to the table
UPDATE SPG_INTERFACE_TABLE
SET response = P_RESPONSE,
data_transfer_status = PDATA_TRANSFER_STATUS,
oracle_error = PORACLE_ERROR,
oracle_error_message = PORACLE_ERROR_MESSAGE,
response_time = PRESPONSE_TIME
WHERE transaction_id = PTRANSACTION_ID;
COMMIT;
END;
/I have fixed the problem by own.
Seems there are some while space in the endpoint url.
Fix
http_req:= utl_http.begin_request
trim(l_endpoint_url)
,'POST'
,'HTTP/1.1'
It works...
Regards
BS -
Hi ,
I am getting below error frequently in alert log of database.
ORA-12012: error on auto execute of job 754461
ORA-29279: SMTP permanent error: ORA-29279: SMTP permanent error: 501 Syntax error, parameters in command "RCPT TO:" unrecognized or missing
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at "APPS.EIS_UTIL_PKG", line 94
ORA-06512: at "APPS.HKD_PO_ADDON_PKG", line 110
ORA-06512: at line 1You have a job running in the database. Its job ID is 754461
It looks as if that job runs APPS.HKD_PO_ADDON_PKG
That job is attempting to send mail using UTL_SMTP and apparently passing some strange value to SMTP server for the RCPT TO: parameter. -
ORA-06512: in SYS.SECURE_DML, line 5
Hi all,
I'm trying to create a procedure that is called by a trigger like this:
CREATE OR REPLACE PROCEDURE SECURE_DML is
BEGIN
if (TO_CHAR(SYSDATE, 'DY') IN ('SAB','DOM')) OR (TO_CHAR(SYSDATE, 'HH24:MI')
NOT BETWEEN '08:00' AND '17:00') THEN
RAISE_APPLICATION_ERROR(-20500, 'Inserções de funcionários somente no horário comercial');
end if;
end;
alter SESSION set nls_date_format ='DY HH24:MI';
CREATE OR REPLACE TRIGGER secure_dml2
BEFORE INSERT ON SCOTT.EMP2
BEGIN
exec procedure SECURE_DML;
end;
alter SESSION set nls_date_format ='DY HH24:MI';
insert into SCOTT.emp2(empno, ename, sal, deptno) values(7935, 'SANDRA', 1203, 10);
The error that display is:
ORA-06512: in SYS.SECURE_DML line 5
ORA-06512: in SYS.SECURE_DML2 line 2
What should I do to remove these erros?
Thanks
Edited by: 994323 on 16/03/2013 20:05You post in wrong forum. Mark correct answer and close this thread. Post at {forum:id=75}
-
Internal Oracle Error in SYS.UTL_HTTP.READ_TEXT - ORA-6512 @ line 1336
I have a PLSQL program that performs an HTTP POST to fetch data from an external website. The website is returning the contents of a file in the HTTP response. This program has been working for years and just started giving us trouble recently at a particular client. The issue cannot be reproduced locally, only on a specific client machine when trying to download a particular set of XML files through this HTTP interface.
The stack trace is:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1336
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.UTL_HTTP", line 1336The code in question is:
PROCEDURE SEND_REQUEST
p_REQUEST IN CLOB,
p_RESPONSE OUT CLOB,
p_HEADERNAMES OUT STRING_COLLECTION,
p_HEADERVALUES OUT STRING_COLLECTION,
p_ERRORMESSAGE OUT VARCHAR2
) IS
v_HTTP_REQ UTL_HTTP.REQ;
v_HTTP_RESP UTL_HTTP.RESP;
v_REQUEST_LEN NUMBER;
v_POS NUMBER;
v_COUNT NUMBER;
v_TEXT VARCHAR2(8192);
v_LEN NUMBER;
BEGIN
-- raise Request_Failed error if an HTTP error occurs
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(TRUE);
UTL_HTTP.SET_DETAILED_EXCP_SUPPORT(FALSE);
-- extend timeout to 10 minutes
UTL_HTTP.SET_TRANSFER_TIMEOUT(60 * 10);
v_HTTP_REQ := UTL_HTTP.BEGIN_REQUEST(G_URL, 'POST');
-- disable cookies for this request
UTL_HTTP.SET_COOKIE_SUPPORT(v_HTTP_REQ, FALSE);
-- authentication
IF g_USERNAME IS NOT NULL THEN
UTL_HTTP.SET_AUTHENTICATION(v_HTTP_REQ, g_USERNAME, g_PASSWORD);
END IF;
-- upload request body
v_REQUEST_LEN := DBMS_LOB.GETLENGTH(p_REQUEST);
UTL_HTTP.SET_HEADER(v_HTTP_REQ, 'Content-Type', 'application/x-www-form-urlencoded');
UTL_HTTP.SET_HEADER(v_HTTP_REQ, 'Content-Length', v_REQUEST_LEN);
-- write the CLOB request data
v_POS := 1;
WHILE v_POS <= v_REQUEST_LEN LOOP
v_LEN := 8192;
DBMS_LOB.READ(p_REQUEST, v_LEN, v_POS, v_TEXT);
UTL_HTTP.WRITE_TEXT(v_HTTP_REQ, v_TEXT);
v_POS := v_POS + v_LEN;
END LOOP;
-- get the response
v_HTTP_RESP := UTL_HTTP.GET_RESPONSE(v_HTTP_REQ);
-- read it into CLOB
DBMS_LOB.CREATETEMPORARY(p_RESPONSE, TRUE);
DBMS_LOB.OPEN(p_RESPONSE, DBMS_LOB.LOB_READWRITE);
LOOP
BEGIN
UTL_HTTP.READ_TEXT(v_HTTP_RESP, v_TEXT, 8192);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
ERRS.LOG_AND_CONTINUE('Send_Request: Exeception occurred reading text from the http response.',
p_LOG_LEVEL => LOGS.C_LEVEL_INFO_MORE_DETAIL);
v_TEXT := '';
END;
EXIT WHEN NVL(LENGTH(v_TEXT), 0) = 0;
DBMS_LOB.WRITEAPPEND(p_RESPONSE, LENGTH(v_TEXT), v_TEXT);
END LOOP;
DBMS_LOB.CLOSE(p_RESPONSE);
-- gather response headers
p_HEADERNAMES := STRING_COLLECTION();
p_HEADERVALUES := STRING_COLLECTION();
v_COUNT := UTL_HTTP.GET_HEADER_COUNT(v_HTTP_RESP);
v_POS := 1;
WHILE v_POS <= v_COUNT LOOP
p_HEADERNAMES.EXTEND();
p_HEADERVALUES.EXTEND();
UTL_HTTP.GET_HEADER(v_HTTP_RESP, v_POS, p_HEADERNAMES(p_HEADERNAMES.LAST), p_HEADERVALUES(p_HEADERVALUES.LAST));
v_POS := v_POS + 1;
END LOOP;
UTL_HTTP.END_RESPONSE(v_HTTP_RESP);
-- success!
p_ERRORMESSAGE := NULL;
EXCEPTION
WHEN UTL_HTTP.REQUEST_FAILED THEN
ERRS.LOG_AND_CONTINUE('Send_Request: Exeception Request Failed caught.', p_LOG_LEVEL => LOGS.C_LEVEL_INFO_MORE_DETAIL);
WHEN OTHERS THEN
ERRS.LOG_AND_CONTINUE('Send_Request: Exeception Others caught.', p_LOG_LEVEL => LOGS.C_LEVEL_INFO_MORE_DETAIL);
END SEND_REQUEST;It fails specifically at the section that is reading text from the response:
UTL_HTTP.READ_TEXT(v_HTTP_RESP, v_TEXT, 8192);
...Any thoughts?
I have used a packet sniffer, Wireshark, to monitor the HTTP traffic between the website and database during the issue. There is nothing malformed with the Response content. No special chars that I can find. Etc.
The machine in question that is failing is running 10gR2.
I have done some searching and I found this forum post:
utl_http.read_text and multi-byte support
and this Oracle bug:
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=4015165&productFamily=Oracle
Not really much help.
Any help would be appreciated.
Thanks,
GatorPaul
Edited by: 939368 on Jun 7, 2012 2:27 PMIn this case, and most cases, the NLS_LENGTH_SEMANTICS is set to 'BYTE'. Realize that this is an Oracle application that we deploy into an external customer environment and we do not always have the ability to control NLS Settings.
So, based on your explanation, I would expect that an approach like this would fix it:
v_TEXT VARCHAR2(32766);
UTL_HTTP.READ_TEXT(v_HTTP_RESP, v_TEXT, 8192);
Here we are saying, get the next 8192 characters, but put that into a buffer that allows up to 32K bytes. This should allow for the enough room for up to 4 bytes per character. Am I understanding you correctly?
But here is my question:
I put a fix in place today, where I increased both the v_TEXT byte size and the GET_TEXT 'len' parameter to 32766 and it fixed the issue. By doing that, I am telling it: Give me the next 32766 characters and put it into a VARCHAR2(32766). Given your explanation, I would expect this to overflow the v_TEXT variable as well, or at least have the potential to do so.
We were processing 5 different XML responses. They were all failing originally. After the change, they all passed. Their sizes were 47K, 21K, 14K, 48K, and 21K. If the XML file was small, < 32K then maybe is slipped under the radar given the new buffer size of 32766. But what about the 2 files that were over 32K. Very curious on your thoughts. I did not have a loop counter in there to see how many times it was looping to parse the 48K file. With a new buffer size of 32K I would expect it to loop 2x. But, I know in this case, the file was streamed over the network using 14 smaller TCP packets, none of which were more than 9000 bytes. Maybe the PLSQL looped 14 times as well.
When the process was failing for all 5 files, I do know at that time it was always failing on the first loop (first 8192 characters).
Anyway, Thanks for the advice. I will let you guys know if I uncover anymore info.
G8torPaul
Edited by: G8torPaul on Jun 12, 2012 2:04 PM
Edited by: G8torPaul on Jun 12, 2012 2:04 PM
Edited by: G8torPaul on Jun 12, 2012 2:05 PM -
Impdump fails with ORA-06512: at "SYS.KUPW$WORKER", line 6345
Hi All,
We are trying to import a data from PROD to test using datapump utility.
Its is failing with the below error.
Import: Release 10.2.0.4.0 - 64bit Production on Friday, 01 July, 2011 11:32:12
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYS"."SYS_IMPORT_SCHEMA_02" successfully loaded/unloaded
Starting "SYS"."SYS_IMPORT_SCHEMA_02": /******** AS SYSDBA remap_tablespace=FCATDB:USERS SCHEMAS=FCATDB:FCATDB directory=EXPDP_DIR dumpfile=expdp_fcatdb.dmp logfile=probin1.log
Processing object type SCHEMA_EXPORT/USER
ORA-39083: Object type USER failed to create with error:
ORA-02380: profile BOB does not exist
Failing sql is:
CREATE USER "FCATDB" IDENTIFIED BY VALUES '57433E901EB2CA43' DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" PROFILE "BOB"
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT SELECT ANY SEQUENCE TO "FCATDB"
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT CREATE SYNONYM TO "FCATDB"
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT SELECT ANY TABLE TO "FCATDB"
ORA-39083: Object type SYSTEM_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT UNLIMITED TABLESPACE TO "FCATDB"
Processing object type SCHEMA_EXPORT/ROLE_GRANT
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT "CONNECT" TO "FCATDB"
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT "RESOURCE" TO "FCATDB"
ORA-39083: Object type ROLE_GRANT failed to create with error:
ORA-01917: user or role 'FCATDB' does not exist
Failing sql is:
GRANT "DBA" TO "FCATDB"
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39083: Object type DEFAULT_ROLE failed to create with error:
ORA-01918: user 'FCATDB' does not exist
Failing sql is:
ALTER USER "FCATDB" DEFAULT ROLE ALL
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
ORA-39083: Object type PROCACT_SCHEMA failed to create with error:
ORA-31625: Schema FCATDB is needed to import this object, but is unaccessible
ORA-01435: user does not exist
Failing sql is:
BEGIN
sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'BOBL_PRO', inst_scn=>'71243687320');COMMIT; END;
Processing object type SCHEMA_EXPORT/SYNONYM/SYNONYM
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACPKS_MISC" FOR "BOB"."ACPKS_MISC"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACTBS_ACCBAL_HISTORY" FOR "ACTBS_ACCBAL_HISTORY"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACTBS_ACCSTATS_PTD" FOR "ACTBS_ACCSTATS_PTD"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_ACVWS_ALL_AC_ENTRIES" FOR "ACVWS_ALL_AC_ENTRIES"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTBS_CONTRACT_PARTIES" FOR "BCTBS_CONTRACT_PARTIES"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTB_CONTRACT_MASTER" FOR "BCTB_CONTRACT_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTMS_DOCS_MASTER" FOR "BCTMS_DOCS_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCTM_PRODUCT_MASTER" FOR "BCTM_PRODUCT_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_BCVW_REPORTS" FOR "BCVW_REPORTS"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CATMS_CHECK_BOOK" FOR "CATMS_CHECK_BOOK"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTBS_CONTRACT_CHARGES" FOR "CFTBS_CONTRACT_CHARGES"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTBS_CONTRACT_INTEREST" FOR "CFTBS_CONTRACT_INTEREST"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_FLOAT_RATE_DETAIL" FOR "CFTMS_FLOAT_RATE_DETAIL"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_FLOAT_RATE_MASTER" FOR "CFTMS_FLOAT_RATE_MASTER"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_PRODUCT_CHARGE" FOR "CFTMS_PRODUCT_CHARGE"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_PRODUCT_ICCF" FOR "CFTMS_PRODUCT_ICCF"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_PRODUCT_INTEREST" FOR "CFTMS_PRODUCT_INTEREST"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTMS_RATE_CODE" FOR "CFTMS_RATE_CODE"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CFTM_RATE_CODE" FOR "CFTM_RATE_CODE"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CHKHOL_AND_GET_NEXTWDAY" FOR "FN_CHKHOL_AND_GET_NEXTWDAY"@"FCATFCLINK.REGRESS.RDBMS.DEV.US.ORACLE.COM"
ORA-39083: Object type SYNONYM failed to create with error:
ORA-01917: user or role '' does not exist
Failing sql is:
CREATE SYNONYM "FCATDB"."FCC_CLTBS_ACCOUNT_MASTER" FOR "CLTBS_ACCOUNT_M
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA_HISTORY" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA_HISTORY" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."ADMINTXNUNAUTHDATA_HISTORY" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."DAILYTXNAMT" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."FCATFLEXMLAUDITLOG" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTALERTNOTIFIER" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTALERTNOTIFIER" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTALERTNOTIFIER" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTAPPSEQUENCE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTINITAUTHTYPES" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTPERSONALCUST" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."MSTTXN" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."TXN_TEMP_MSTCORPORATE" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"FCATDB"."TXN_TEMP_MSTCORPORATE" creation failed
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.PUT_DDL [FUNCTION:"FCATDB"."FN_CHKHOL_AND_GET_NEXTWDAY"]
ORA-44001: invalid schema
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6345
----- PL/SQL Call Stack -----
object line object
handle number name
c000000224567298 15032 package body SYS.KUPW$WORKER
c000000224567298 6372 package body SYS.KUPW$WORKER
c000000224567298 12800 package body SYS.KUPW$WORKER
c000000224567298 12080 package body SYS.KUPW$WORKER
c000000224567298 3346 package body SYS.KUPW$WORKER
c000000224567298 6972 package body SYS.KUPW$WORKER
c000000224567298 1314 package body SYS.KUPW$WORKER
c00000022c7210b8 2 anonymous block
Job "SYS"."SYS_IMPORT_SCHEMA_02" stopped due to fatal error at 11:32:41
Please help me on this.
Db version : 10.2.0.4
Os : HP-UX.
Thanks and Regards,ORA-01917: user or role 'FCATDB' does not existError: ORA 1917
Text: user or role <name> does not exist
Cause: An invalid user or role name was specified.
Action: Check that a valid user or role name is used.
If you are using IMPDP then no need to mention the user name, if the user is different then you can use remap_schema option,
If dumpfile has only one schema then no need to mention the clause SCHEMAS also.
change as SCHEMAS=FCATDB instead of SCHEMAS=FCATDB:FCATDB
impdp /******** AS SYSDBA remap_tablespace=FCATDB:USERS SCHEMAS=FCATDB directory=EXPDP_DIR dumpfile=expdp_fcatdb.dmp logfile=probin1.log -
Ora-06502:pl/sql and ora-06512 at sys.owa_util errors
Greetings -
I have just installed APEX 2.2 in my 9.2.0.7 database and am going through the exercises in the "2 Day+ Application Express Developer's Guide." I was making good progress, until I got to Chapter 5, How to Control Form Layout. I created the script "ht_emp", as instructed. Everything in the script works, except for the "create or replace trigger bi_ht_emp" part. It fails with the following errors:
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "SYS.OWA_UTIL", lone 328 ORA-06512: at "SYS.HTP", line 862 ORA-06512: at "SYS.HTP", line 977 ORA-06512: at "SYS.HTP", line 995 ORA-06512: at "FLOWS_020200.WWV_FLOW_SW_API", line 428 ORA-01003: no statement parsed. I have confirmed that nls_length_semantics = BYTE
Any suggestions?
Thanks in advance - GailScott -
Here's the part of the script that chokes --
CREATE OR REPLACE TRIGGER bi_ht_emp
BEFORE INSERT ON ht_emp
FOR EACH ROW
BEGIN
SELECT ht_emp_seq.nextval
INTO :new.emp_id
FROM DUAL;
:new.rec_create_date := SYSDATE;
END;
Thanks fro helping -
Gail -
ORA-6512 when using Analyze in 9.2.0.7
Good Day! Kindly Help
I'm using 9.2.0.7 on Windows server 2003 SP1.
Whenever I use the Analyze Wizard located on Oracle EM Console, just to compute statistics for a certain table, the ff is the query that is executed:
begin dbms_stats.gather_table_stats(ownername=>'ECI'.tabname=>'AGGREGATEENTITY',partname=>NULL);
it produces the ff error:
ORA-20000:Unable to analyze TABLE "ECI"."AGGREGATEENTITY", insufficient priviledges or does not exist
ORA-06512: at"SYS.DBMS_STATS", LINE 10292
ORA-06512: at"SYS.DBMS_STATS", LINE 10315
ORA-06512: at line 2
It produces the same error for only one of my schema. Oh by the way I'm using user SYS as sysdba to do this.You doesn't seem to have privileges to analyze the table. You would either be needing ANALYZE ANY privilege (or others....can't remember).
HTH
Thanks
Chandra Pabba
Message was edited by:
ChandraP
Message was edited by:
ChandraP -
ORA-06512: at "SYS.DBMS_XMLGEN", (ORA-00942: table or view does not exist)
Hey Guys, it's Xev.
I decide to use SQL and XML and it works in one scenario, but in another scenario, it doesn't.
Here is the Code, I am passing in two variables, First, I pass in the table_name and then i pass in the schema.
If I am doing this with the "user" connected and it's looking in it's own schema, it's find the results, like so, but if i try to execute this code while not
connected to the same user i am searching on i get this error.
ORA-19202: Error occurred in XML processing
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_XMLGEN", line 288
ORA-06512: at line 1
19202. 00000 - "Error occurred in XML processing%s"
*Cause: An error occurred when processing the XML function
*Action: Check the given error message and fix the appropriate problem
This code works only of you are connected to the user that you are searching on.
But if you search for another user tables, it's blows up and gives the XML error above...
SET SERVEROUTPUT ON
exec DBMS_OUTPUT.ENABLE(1000000);
VAR search_string VARCHAR2(28)
EXEC :search_string := '^[0-9]{3}-[0-9]{2}-[0-9]{4}$'
COLUMN "Searchword" FORMAT A28
COLUMN "Table" FORMAT A9
COLUMN "Column/Value" FORMAT A50
SELECT DISTINCT SUBSTR (:search_string, 1, 28) "Searchword",
SUBSTR (table_name, 1, 14) "Table",
SUBSTR (t.column_value.getstringval (), 1, 50) "Column/Value"
FROM dba_tab_cols,
--where owner = ('&SCHEMA_NAME')
TABLE
(XMLSEQUENCE
(DBMS_XMLGEN.GETXMLTYPE
( 'SELECT ' || column_name ||
' FROM ' || table_name ||
' WHERE REGEXP_LIKE
(' || column_name || ','''
|| :search_string || ''')'
).extract ('ROWSET/ROW/*'))) t
--WHERE table_name IN ('FIND_TEST')
WHERE table_name = upper('&TABLE_NAME')
AND OWNER = upper('&SCHEMA_NAME')
ORDER BY "Table"
Can someone please explain how (DBMS_XMLGEN) works, and why it's throwing that error??
thanks,
Xev.It has nothing to do with DBMS_XMLGEN.GETXMLTYPE. It simply means user executing your SQL has no select privilege on table &SCHEMA_NAME.&TABLE_NAME.
SY. -
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "SYS.OWA_UTIL"
Was working on tutorial from the:
Oracle Database Express Edition 2 Day Plus Application Express Developer Guide
Working on the section 4: How to Control Form Layout.
Ran into a problem trying to compile the Create HT-EMP Table script.
keep getting this error for this particular segment creating the bu_ht_emp trigger:
pp. 4-2 and 4-3
CREATE OR REPLACE TRIGGER bi_ht_emp
BEFORE INSERT ON ht_emp
FOR EACH ROW
BEGIN
SELECT ht_emp_seq.nextval
INTO :new.emp_id
FROM DUAL;
:new.rec_create_date := SYSDATE;
END;
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "SYS.OWA_UTIL", line 354....etc
I've check the syntax for the entire script and it all checks out. Does anyone have a clue why this is failing?If I'm looking at the same DDL, not seeing where it would throw an owa_util error, are you running it in the apex script editor?
Just plain sqlplus doesn't like the empty line stuck in with the list of check constraints on the emp_dept column, after fixing that up (and dropping the sequence that got created on the first pass) the DDL and insert runs fine- -
Hi All,
Please have a look into the issue and respond me accordingly...
Wed Jun 9 22:20:07 MDT 2010
Checked for pattern ORA-. Excluded these patterns checked by other processes - ORA-16 ORA-32 and excluded these patterns that were not desired - ORA-1652
ORA-12012: error on auto execute of job 400721
ORA-29285: file write error
ORA-06512: at "SYS.UTL_FILE", line 77
ORA-06512: at "SYS.UTL_FILE", line 691
ORA-06512: at "COMMISSIONS.CM_CREATE_INVREP", line 251
ORA-06512: at "COMMISSIONS.CM_CREATE_INVREP", line 1216
ORA-29285: file write error
ORA-06512: at line 1
Database is :-10.2.0.4.0
Server :-HP-UX
Thanks
VimlenduPlease check if you read/write permission on UTL_FILE directory location.
Also check out for available space.
Regards
Rajesh -
Ora-6512 error in string appending , plz guide to soleve this.
declare
x varchar2(4000);
y varchar2(10000);
cursor c is select ename||'----'||to_char(empno) from emp; /*( to_char or no to_char it did not matter)*/
begin
open c;
loop
fetch c into y ;
exit when(sql%notfound);
--if c%rowcount = 1 then
-- x:=y;
-- else
x:=x||y; -- end if;
end loop;
close c;
dbms_output.put(x);
--exception
-- when others then
-- dbms_output.put_line(sqlerrm);
-- dbms_output.put_line(sqlcode);
end;
above code gives error as
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 13
it seems string appending has problem. pls suggest a work around.
regardsthanks,
yes it should have been. c%notfound
declare
x varchar2(4000);
y varchar2(100);
cursor c is select ename||'----'||empno||chr(10) from emp;
begin
open c;
loop
fetch c into y ;
exit when c%notfound;
if c%rowcount = 1 then
x:=y;
else
x:=x||y;
end if;
end loop;
close c;
dbms_output.put_line(x);
--exception
-- when others then
-- dbms_output.put_line(sqlerrm);
-- dbms_output.put_line(sqlcode);
end;
Now the error i find is
ERROR at line 1:
ORA-20000: ORU-10028: line length overflow, limit of 255 chars per line
ORA-06512: at "SYS.DBMS_OUTPUT", line 35
ORA-06512: at "SYS.DBMS_OUTPUT", line 133
ORA-06512: at line 17
what i am trying is :- to store multiple records in single variable as multiline not single line. that's why i am using chr(10) (new line). Now i am facing the above error.
regards ravi -
Error - ORA-06512: at "SYS.OWA_UTIL" - when trying to download files.
Hi, I have an application where I try to implement download of the attachments.
I am trying to use Denes Kubicek approach
http://apex.oracle.com/pls/otn/f?p=31517:15:4179200867819025:REMOVE_ID:NO::P15_DELETE_ID:4672033519340628563.
When I run stored procedure I get this error message.
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.OWA_UTIL", line 356
ORA-06512: at "SYS.HTP", line 1368
ORA-06512: at "SYS.HTP", line 1443
ORA-06512: at "SYS.OWA_UTIL", line 413
ORA-06512: at "RPA.LOADATTACHMENT", line 24
ORA-06512: at line 6
The code breaks at :
OWA_UTIL.mime_header (NVL (v_mime, 'application/octet'), FALSE);
Does anybody have any idea why it breaks?
Thanks in advance.
Robert
Edited by: robik on 2-Feb-2011 5:58 AMActually, the error comes up when I try to execute any of these lines:
OWA_UTIL.mime_header (NVL (v_mime, 'application/octet'), FALSE);
-- set the size so the browser knows how much to download
HTP.p ('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
HTP.p ( 'Content-Disposition: attachment; filename="'
|| REPLACE (REPLACE (SUBSTR (v_file_name,
INSTR (v_file_name, '/') + 1
CHR (10),
NULL
CHR (13),
NULL
|| '"'
Is there any security issue?
Robert
Maybe you are looking for
-
Maximum RAM that Logic will use on a PPC machine
I have a Power mac PPC Dual Proc 2.7 with 4gb ram - I was wondering if it might be worth going all the way to 8 gig - is this going to be useful to me? i.e can Logic use it? many thanks in advance
-
DVD Player won't read DVD then crashes when trying to load VIDEO_TS folder
I use DVD player for movies maybe once a week. I insert a DVD. It shows up on the dekstop as it should. Once in a while, if it's a video DVD, DVD player opens and it says, "this type of media is not supported" (or whatever the message is). I can open
-
Yahoo mail tool bar (delete,more,spam,etc) not working in firefox.Works in Explorer.Web search points to Mozilla update problem."Plug-ins" up to date. Solutions? I've used firefox for years now with out problems. Now that help is needed, Could you ma
-
How do I get lost apps after iOS 5 installation?
I updated itunes and updated our ipads. I have lost all of my wifes business apps during this process. How do i get it all back to normal? We do have 2 computers authorized to her itunes account. One is her work computer, which she uses and it is
-
Free Training Documentation for APO
Everyone, Does anyone know about a good training document for APO configuration. Please let me know. Thanks Gayatri