Oraarch file getting generated very often in /oracle/ SID /oraarch/

Dear All
I am facing a problem of getting oracle archive (oraarch) generated very frequently nearly 50MB file in less than a minute due to which my Filesystem capacity of Oraarch is getting full soon.
I have monitored there is no any batch job, Upload job, or any loaded job going even in Idle time in late night the same frequency of Archival is going so in a duration of 6-7 hours i am getting the total archive of 50GB.
I have Oracle 10g Patch Set 10.2.0.4.0 and all the 39 Patches & 2 CPU Patches applied by Opatch & MOPatch and all the Oracle 10g Parameter  are set as per the note 830576.
Can you please let me know what can be the issue?
Thanks & Best Regards
Rahul

You probably have statistics being populated and AWR running. Oracle 10g has system jobs that are set to run frequently (i.e. every hour, every night, etc).
column repeat_interval format a70
select job_name, repeat_interval, enabled from dba_scheduler_jobs;
column what format a50 word_wrapped
select job, last_date, next_date, broken, what from dba_jobs;
50mb is probably too small for your environment. You'll probably want to at least double that... at least.
And if your oraarch is filling up so frequently you should consider increasing the space of oraarch. It sounds like your system is much busier than you expected.
Run this command to get an idea of what Oracle recommends for your redo log file sizes...
SELECT TARGET_MTTR,ESTIMATED_MTTR,WRITES_MTTR,WRITES_LOGFILE_SIZE, OPTIMAL_LOGFILE_SIZE FROM V$INSTANCE_RECOVERY;
If that doesn't work it's probably because you're not using the system parameter fast_start_mttr_target... which I guess is something SAP advises against using?  I'm an Oracle DBA but a SAP newbie so I'm still learning what parameters SAP wants me to set and why
Hope that helps..
Rich

Similar Messages

  • My MacBook Pro gets very slow while doing  work like watching movies and using net .. video gets lag very often

    My MacBook Pro gets very slow while doing  work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • In my iPad the following apps are getting crashed very often, chrome, You Tube, gmail, google search. Please let me know how to fix it

    In my iPad the following apps are getting crashed very often, chrome, You Tube, gmail, google search. Please let me know how to fix it

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • InDesign getting hanged very often

    Hello All,
    We recently upgraded our license from CS4 to CS5.5 and found that InDesign is getting hanged very often during find & replace, loading XML files, etc. Actually we faced like this issue in CS3, and when we upgraded to CS4, this issue was found resolved. But now again facing the same hanging issue, can anyone of you facing this issue or let me know how we rectify this issue?
    Please respond at the earliest, since we are planning to upgrade many licenses.
    Thanks,
    Praveen

    We don't have enough information to say with any reliability.
    To know, you would need to see the stack trace associated with the process.
    Under XP, that is easy. Under Windows 7, it is hard. You can try installing DRWTSN32 from an XP system, or you can try installing WinDBG. Both of these are not turnkey solutions that work easily, and if you get stuck, there is only very limited help. Try finding a Windows systems programmer to help you.
    But yes, it is most *likely* (I would say 14 times out of 15) that this is InDesign's fault.

  • Trace file getting generated

    Hi,
    We have PI 7.1 installed in landscape. Some trace files getting generated at
    server\sapmnt\SID\DVEBMGS01\j2ee\cluster\server0\jrfc07500_06148.trc and utilizing more disk space aroung 1 GB.
    Could you please let me know from where trace can be disabled
    thanks

    Hi Yash,
    Please find the details on this link:
    http://help.sap.com/saphelp_nw04/Helpdata/EN/f6/daea401675752ae10000000a155106/content.htm
    name
    jrfc*.trc
    location
    directory j2ee/cluster/server* or defined path
    how to switch on and off set JVM options for the server via the Config Tool and restart server: -Djrfc.trace=0/1, -Djco.trace_path=[defined_path]
    Kindly let us know if this resolves the problem.
    Thanks.
    Regards,
    Shweta

  • I put iPod on "songs, shuffle" but the shuffle isn't random!  Same artist repeats often, same songs repeat before other songs are played.  With over 2000 songs on the iPod, I shouldn't be getting repeats very often.  Anybody else?

    I put iPod on "songs, shuffle" but the shuffle isn't random!  Same artist repeats often, same songs repeat before other songs are played.  With over 2000 songs on the iPod, I shouldn't be getting repeats very often.  Anybody else?

    Shuffle is not perfect. What you are experiencing is normal.

  • Transport queue gets closed very often

    We found out transport queue gets closed very often on QAS system. We open it.
    However what is the reason. Could it be because of an job is sheduled to import every 15 minutes. or is it something wrong

    Hello Jan,
    Yes, its expected behavior because when import runs, TMS lock the import queue for avoiding incosistency.
    As long as the import is running or is scheduled, you see this status is displayed in the Import Overview with either This graphic is explained in the accompanying text or This graphic is explained in the accompanying text. After the import, the import queue is opened again automatically by the transport control program.
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/ea253715dfb808e10000009b38f889/frameset.htm
    Regards,
    Debasis.

  • Backup file getting generated on FRA insted of format path

    Hi,
    I have below script to generate RMAN full backup on given path in FORMAT directory, still RMAN genarate one .bkp file on FRA.
    We require to generate all backup files on given format path only.
    below file was generated on FRA
    o1_mf_nnndf_TAG20100804T043926_65l9t06h_.bkpBelow is the code for generating full backup.
    backup database plus archivelog FORMAT '/export/home/nfs_bak/lims/backup/ndb/backup_%d_DB_%D%M%Y_%U_%s'  delete all input;
    resync catalog;
    report schema;
    list backup;
    CROSSCHECK BACKUP;
    CROSSCHECK BACKUPSET;
    DELETE NOPROMPT EXPIRED BACKUP;
    DELETE NOPROMPT OBSOLETE DEVICE TYPE DISK;
    CROSSCHECK  ARCHIVELOG ALL;
    DELETE NOPROMPT EXPIRED ARCHIVELOG ALL;Oracle : 11gR2
    OS:Solaris

    Output for old command:
    RMAN> backup database plus archivelog FORMAT '/export/home/nfs_bak/lims/backup/ndb/backup_%d_DB_%D%M%Y_%U_%s'  delete all input;
    Starting backup at 05-AUG-10
    current log archived
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=194 device type=DISK
    allocated channel: ORA_DISK_2
    channel ORA_DISK_2: SID=225 device type=DISK
    channel ORA_DISK_1: starting archived log backup set
    channel ORA_DISK_1: specifying archived log(s) in backup set
    input archived log thread=1 sequence=26 RECID=24 STAMP=726199910
    channel ORA_DISK_1: starting piece 1 at 05-AUG-10
    channel ORA_DISK_1: finished piece 1 at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/backup_NDB_DB_05082010_16lkhrj8_1_1_38 tag=TAG20100805T021152 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
    channel ORA_DISK_1: deleting archived log(s)
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_05/o1_mf_1_26_65nok6fb_.arc RECID=24 STAMP=726199910
    Finished backup at 05-AUG-10
    Starting backup at 05-AUG-10
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    channel ORA_DISK_1: starting full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    input datafile file number=00001 name=+DATA/lims/ndb/system01.dbf
    input datafile file number=00002 name=+DATA/lims/ndb/sysaux01.dbf
    input datafile file number=00006 name=+DATA/lims/ndb/datafile/ndb_cellmap_idx_tbs_01.dbf
    input datafile file number=00008 name=+DATA/lims/ndb/datafile/ndb_fingerprint_tbs_idx_01.dbf
    input datafile file number=00010 name=+DATA/lims/ndb/datafile/ndb_sys_idx_tbs_01.dbf
    channel ORA_DISK_1: starting piece 1 at 05-AUG-10
    channel ORA_DISK_2: starting full datafile backup set
    channel ORA_DISK_2: specifying datafile(s) in backup set
    input datafile file number=00005 name=+DATA/lims/ndb/datafile/ndb_cellmap_tbs_01.dbf
    input datafile file number=00007 name=+DATA/lims/ndb/datafile/ndb_fingerprint_tbs_01.dbf
    input datafile file number=00009 name=+DATA/lims/ndb/datafile/ndb_sys_tbs_01.dbf
    input datafile file number=00003 name=+DATA/lims/ndb/undotbs01.dbf
    input datafile file number=00004 name=+DATA/lims/ndb/users01.dbf
    channel ORA_DISK_2: starting piece 1 at 05-AUG-10
    channel ORA_DISK_1: finished piece 1 at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/backup_NDB_DB_05082010_17lkhrj9_1_1_39 tag=TAG20100805T021153 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:06:46
    channel ORA_DISK_2: finished piece 1 at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/NDB/backupset/2010_08_05/o1_mf_nnndf_TAG20100805T021153_65nokdyo_.bkp tag=TAG20100805T021153 comment=NONE
    channel ORA_DISK_2: backup set complete, elapsed time: 00:06:56
    Finished backup at 05-AUG-10
    Starting backup at 05-AUG-10
    current log archived
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    channel ORA_DISK_1: starting archived log backup set
    channel ORA_DISK_1: specifying archived log(s) in backup set
    input archived log thread=1 sequence=27 RECID=25 STAMP=726200330
    channel ORA_DISK_1: starting piece 1 at 05-AUG-10
    channel ORA_DISK_1: finished piece 1 at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/backup_NDB_DB_05082010_19lkhs0b_1_1_41 tag=TAG20100805T021851 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
    channel ORA_DISK_1: deleting archived log(s)
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_05/o1_mf_1_27_65noyb7m_.arc RECID=25 STAMP=726200330
    Finished backup at 05-AUG-10
    Starting Control File and SPFILE Autobackup at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/db11g_c-1074407344-20100805-01 comment=NONE
    Finished Control File and SPFILE Autobackup at 05-AUG-10output for updated command:
    RMAN> RUN
    2> {
    3>  allocate channel channel1 device type disk format '/export/home/nfs_bak/lims/backup/ndb/backup_%d_DB_%D%M%Y_%U_%s';
    4>  backup database plus archivelog delete all input;
    5> release channel channel1;
    6> }
    7> resync catalog;
    8> report schema;
    9> list backup;
    10> crosscheck backup;
    11> crosscheck backupset;
    12> delete noprompt expired backup;
    13> delete noprompt obsolete;
    14> crosscheck archivelog all;
    15> DELETE NOPROMPT EXPIRED ARCHIVELOG ALL;
    16>
    starting full resync of recovery catalog
    full resync complete
    allocated channel: channel1
    channel channel1: SID=98 device type=DISK
    Starting backup at 05-AUG-10
    current log archived
    channel channel1: starting archived log backup set
    channel channel1: specifying archived log(s) in backup set
    input archived log thread=1 sequence=20 RECID=18 STAMP=726148869
    input archived log thread=1 sequence=21 RECID=19 STAMP=726175480
    input archived log thread=1 sequence=22 RECID=20 STAMP=726185922
    input archived log thread=1 sequence=23 RECID=21 STAMP=726195156
    input archived log thread=1 sequence=24 RECID=22 STAMP=726197409
    channel channel1: starting piece 1 at 05-AUG-10
    channel channel1: finished piece 1 at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/backup_NDB_DB_05082010_12lkhp52_1_1_34 tag=TAG20100805T013010 comment=NONE
    channel channel1: backup set complete, elapsed time: 00:00:07
    channel channel1: deleting archived log(s)
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_04/o1_mf_1_20_65m3p0rz_.arc RECID=18 STAMP=726148869
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_04/o1_mf_1_21_65mxonbz_.arc RECID=19 STAMP=726175480
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_04/o1_mf_1_22_65n7vtog_.arc RECID=20 STAMP=726185922
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_05/o1_mf_1_23_65njwhld_.arc RECID=21 STAMP=726195156
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_05/o1_mf_1_24_65nm31ko_.arc RECID=22 STAMP=726197409
    Finished backup at 05-AUG-10
    Starting backup at 05-AUG-10
    channel channel1: starting full datafile backup set
    channel channel1: specifying datafile(s) in backup set
    input datafile file number=00005 name=+DATA/lims/ndb/datafile/ndb_cellmap_tbs_01.dbf
    input datafile file number=00001 name=+DATA/lims/ndb/system01.dbf
    input datafile file number=00002 name=+DATA/lims/ndb/sysaux01.dbf
    input datafile file number=00007 name=+DATA/lims/ndb/datafile/ndb_fingerprint_tbs_01.dbf
    input datafile file number=00006 name=+DATA/lims/ndb/datafile/ndb_cellmap_idx_tbs_01.dbf
    input datafile file number=00008 name=+DATA/lims/ndb/datafile/ndb_fingerprint_tbs_idx_01.dbf
    input datafile file number=00009 name=+DATA/lims/ndb/datafile/ndb_sys_tbs_01.dbf
    input datafile file number=00003 name=+DATA/lims/ndb/undotbs01.dbf
    input datafile file number=00010 name=+DATA/lims/ndb/datafile/ndb_sys_idx_tbs_01.dbf
    input datafile file number=00004 name=+DATA/lims/ndb/users01.dbf
    channel channel1: starting piece 1 at 05-AUG-10
    channel channel1: finished piece 1 at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/backup_NDB_DB_05082010_13lkhp5a_1_1_35 tag=TAG20100805T013018 comment=NONE
    channel channel1: backup set complete, elapsed time: 00:06:55
    Finished backup at 05-AUG-10
    Starting backup at 05-AUG-10
    current log archived
    channel channel1: starting archived log backup set
    channel channel1: specifying archived log(s) in backup set
    input archived log thread=1 sequence=25 RECID=23 STAMP=726197834
    channel channel1: starting piece 1 at 05-AUG-10
    channel channel1: finished piece 1 at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/backup_NDB_DB_05082010_14lkhpia_1_1_36 tag=TAG20100805T013714 comment=NONE
    channel channel1: backup set complete, elapsed time: 00:00:01
    channel channel1: deleting archived log(s)
    archived log file name=/export/home/nfs_bak/lims/backup/ndb/NDB/archivelog/2010_08_05/o1_mf_1_25_65nmj9y9_.arc RECID=23 STAMP=726197834
    Finished backup at 05-AUG-10
    Starting Control File and SPFILE Autobackup at 05-AUG-10
    piece handle=/export/home/nfs_bak/lims/backup/ndb/db11g_c-1074407344-20100805-00 comment=NONE
    Finished Control File and SPFILE Autobackup at 05-AUG-10
    released channel: channel1

  • Empty file is getting generated at Target FTP Folder side

    HI all,
    I have scenario like Idoc to File In Target FTP folder is empty file is generated, In adapter engine (communication channel) it shows the successfull status and pay load is getting created at Message display tool in the Message ID tab.But FTP server will receive only Empty file.
    Please Give me some advise to resolve this issue..
    Regards,
    satya Tanuku

    Hi Satya,
      If you are using FCC then troubleshoot using this blog...
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    Regds,
    Pinangshuk.

  • Sqlnet.ora trace files getting generated even after turning off tracing

    Hi,
    I have recently added the following parameters to the sqlnet.ora file.
    TRACE_LEVEL_SERVER=16
    TRACE_FILE_SERVER=SERVER
    TRACE_DIRECTORY_SERVER=/ftpland/trace
    TRACE_TIMESTAMP_SERVER=on
    Even after removing these enteries from the sqlnet.ora I still see the trave files being generated.
    #####enable tracing###################
    #Trace_level_server=0
    #Trace_filelen_server=1000
    #Trace_fileno_server=1
    #Trace_timestamp_server=on
    #Trace_directory_server=/opt/oracle/product/10.2.0/network/trace
    #Diag_adr_enabled=off
    AUTOMATIC_IPC = ON
    TRACE_LEVEL_CLIENT = OFF
    SQLNET.EXPIRE_TIME = 10
    NAMES.DEFAULT_DOMAIN = bsca.eds.com
    NAME.DEFAULT_ZONE = bsca.eds.com
    SQLNET.CRYPTO_SEED = "232166927-1713903352"
    NAMES.DIRECTORY_PATH = (ONAMES,TNSNAMES)
    NAMES.PREFERRED_SERVERS =
          (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames1.bsca.eds.com)
              (Port = 1575)
            (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames2.bsca.eds.com)
              (Port = 1575)
    NAME.PREFERRED_SERVERS =
          (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames1.bsca.eds.com)
              (Port = 1575)
    (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames2.bsca.eds.com)
              (Port = 1575)
    BEQUEATH_DETACH=YES
    Regards,
    VN

    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME =ROSDMP.bsca.eds.com)
          (ORACLE_HOME = /opt/oracle/product/10.2.0)
          (SID_NAME = ROSDMP)
    TRACE_LEVEL_LISTENER=16
    I believe, this is the reason, you are seeing trace files even after disabling it in sqlnet.ora

  • Web Service wdsl file getting generated as a HTTPS protocol instead of HTTP

    Hi Experts,
    I have a   requirement
    I have created a web service in development client  which is used in interactive adobe form.
    After moving the web service to production only defination is getting generated.
    I have tried to manually create the service in SOAMANAGER , it is getting created as with https protocol.
    In development client it was created as a http protocol.
    Warm Regards
    Abhinav

    Hi Abhinav,
    I'm assuming you don't have a QA system in your landscape if you're transporting straight from Dev to Production. I'm also assuming this because if you transported to QA before production you would have noticed that 'only' the definition is always transported. You have to do the configuration again each time you transport your change, this is SAP default behaviour because each webservice is client dependant so SAP won't know which client this service will be relevant for in the environment you're transporting to.
    The HTTPS issue, this makes sense to me in the production environment. You don't normally have the HTTP protocol enabled in a production environment, only HTTPS for security reasons.
    In yout production environment, check Transaction Code SMICM --> Got (drop down menu) --> Services
    Check what protocols are active there (with a green tick). This will indicate whether the HTTP protocol in enabled in Prod or not.
    Regards, Trevor

  • My i6 get hanged very often

    my i6 get hanged very often

    Hi Vinzgenius,
    Welcome to the Apple Support Communities!
    It sounds like your iPhone is becoming unresponsive. Please follow the troubleshooting steps outlined in the attached article for help resolving this issue. 
    iOS: Not responding or does not turn on - Apple Support
    Best regards,
    Joe

  • Empty file getting generated

    Hi Experts,
    We are testing a newly migrated scenario from XI 3.0 to PI 7.1.
    The Interface mapping consists of Message mapping followed by a ABAP Mapping.This scenario works fine in XI 3.0
    whereas when i try to test the same scenario in 7.1 it creates an empty file.
    I have tried to test the scenario using the first with message mapping alone and then with  abap mapping alone.
    Both work fine generating the expected results.But when i try to run them together it creates an empty file.
    I have maintained the values in exchange profile
    IntegrationBuilder ->IntegrationBuilder.Repository -> com.sap.aii.repository.mapping.additionaltypes
    R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
    We are testing an apap mapping for the first time in 7.1.Please let me know if i am missing any specific setting.
    Thanks,
    Sudhansu

    Hi,
    I assume that the abap mapping does not gets called from the ABAP Stack. 
    Try entering the abap mapping name again and save and activate.  Sometimes this might work.
    Check the class in abap stack and try to regenerate it.
    In the worst case scenario, modify something in the abap mapping and regenerate it.
    Regards
    Krish

  • Where is this file getting generated

    DATA :    w_csv(200) TYPE c. "CSV output file.
      m_check_selscr_fnms c3 o.
      OPEN DATASET w_srvr_nm_o_c3 FOR OUTPUT IN TEXT MODE.
      IF sy-subrc NE 0.
        MESSAGE e001 WITH 'File open error for output' w_srvr_nm_o_c3.
      ENDIF.
      WRITE: / c_output_file, 20 w_srvr_nm_o_c3.
    Thanks in advance
    BWer

    do you have idea about FILE Transaction,
    See the  FILE_GET_NAME Function module and probably they might be using this FM.
    Goto FILE Transaction and look at Logical Path ,Physical path.
    Reward Points if it is helpful
    Thanks
    Seshu

  • Windows getting hanged very often

    Log Name:      System
    Source:        EventLog
    Date:          2/3/2015 11:02:13 AM
    Event ID:      6008
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      HP800RAVW7
    Description:
    The previous system shutdown at 19:27:49 on ?02/?02/?2015 was unexpected.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="EventLog" />
        <EventID Qualifiers="32768">6008</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-02-03T11:02:13.000000000Z" />
        <EventRecordID>30418</EventRecordID>
        <Channel>System</Channel>
        <Computer>HP800RAVW7</Computer>
        <Security />
      </System>
      <EventData>
        <Data>19:27:49</Data>
        <Data>?02/?02/?2015</Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Data>17646</Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Binary>DF0702000100020013001B003100AC01DF0702000100020013001B003100AC01600900003C000000010000006009000000000000B00400000100000000000000</Binary>
      </EventData>
    </Event>

    Hello Rassh,
    Please take a look at the following thread similar to this issue.
    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/unexpected-shutdown-event-id6008/0790ff7c-76cd-4bfe-8202-a3d0c08c49ea
    Please take the following steps for troubleshooting:
    1. Use the task manager to check which process or program occupy large amount of system resource
    2. Update the hardware drivers from the manufacturer website
    3. check if PSU (Power Supply Unit) is functioning properly.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

Maybe you are looking for

  • How to "Purge" Session 0

    Hi, We have some pages which use Session 0. I also have some application items which have corresponding application computations that get set "On New Instance". The computations are pulling values from a table. When we first access a page with sessio

  • Media Encoder is not producing sharp .mp4 exports, any help please?

    Hi all, I've been trying for a while now to export my After Effects CC 2014 project using Media Encoder CC 2014 as a MP4 file. I've chosen 'match source' settings, VBR 2 pass with various bitrates (even extremely high bitrate values) but my video is

  • Keeping focus in the viewable window of a scroll pane

    I have many text fields and text areas inside a scroll pane. When I use tab to cycle through these boxes the focus goes out of the viewable window rather then the scroll pane moving to follow the focus. Is it possible for the scroll pane to follow th

  • "package" flash files for distribution?

    I"ve created some flash content that contains two .flv files that I'm interested in distributing. My question is- how do I "package" the files together so the .flv and .swf open together and I also need to ensure that no one else can open and edit th

  • Dial up mobility

    how do I get dial up mobility?