Oracle 8.1.5 and jdk 1.2.2

We work on Unix Solaris 2.7, Oracle 8.1.5
and a JDK 1.1.8.
We'd like to upgrade to JDK 1.2.2 .
Is it enough to change the only drivers , using the 8.1.6.0.1 release (jdbc816jdk12-sol_01.zip+ nls_charset12_01.zip ) ??
Or should I apply other upgrades from 8.1.5 to 8.1.6 ???

Oracle8iR2's JDBC works fine with Oracle8.1.5.
You can download the new JDBC driver.
null

Similar Messages

Oracle 8.1.5 and JDK 1.2 Thin Driver

We are doing some prototyping with Oracle 8.1.5, BEA WebLogic
6.1, and JDK 1.3. We needed to know what is the latest version
supported by the oracle thing client drivers for that
configuration.
Or are we the only users doing this and is it mandatory that we
migrate to Oracle 8.1.7?
Thanks,
Nikhil Kumar
Lead Architect
Delta Dental Plan of Michigan
[email protected]

Check out the SQLJ FAQ at:
http://technet.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html
"ExceptionInInitializerError: NullPointerException"
(This is likely a general configuration issue, not something specific to your code.)
If you see the following stack trace:
unexpected error occurred... java.lang.ExceptionInInitializerError: java.lang.NullPointerException
at sqlj.framework.ClassFileReader.attribute_info(Compiled Code) ...
at sqlj.tools.Sqlj.statusMain(Compiled Code)
at sqlj.tools.Sqlj.main(Sqlj.java:117)
then you are likely running SQLJ version 8.1.5 or earlier under JDK 1.2.x or later.
You need to download the SQLJ 8.1.6 SDK patch, which contains a new translator.zip
version that you can use to replace the translator.zip from 8.0.5/7.3.4 or from JDeveloper 3.0.
null

Oci_jdbc: Oracle 8.0.5 and JDK 1.2.2

Hi,
I am trying to connect to Oracle 8.0.5 using JDK 1.2.2, both
running on the same AIX server. When 8.0.5 was installed there
were no Java components installed, so as suggested by someone I
copied the jdbc directory(which has the class12.zip) and
libocijdbc8.so to oracle/lib from a test install we have of 8.1.7.
I have set the CLASSPATH, LD_LIBRARY_PATH, and LIBPATH to point to
the classes12.zip and libocijdbc8.so. Looking at the Oracle JDBC
faq these versions of the drivers are needed from JDK 1.2.2. I
have run the JdbcCheckup.java program and get the following error.
I tried using the thin client but it can't find a listener object
or something similar. I have included the error generated below.
Any help would be appreciated to get this running as deadlines are
drawing near and this is the only part holding up the project.
Thanks,
Michael Chernecki
ADAPSYS L.P.
Please enter information to test connection to the database
Connecting to the database...Connecting...
Exception in thread "main" java.lang.UnsatisfiedLinkError: no
ocijdbc8 in java.library.path
at
java.lang.ClassLoader.loadLibrary(ClassLoader.java:1251)
at java.lang.Runtime.loadLibrary0(Runtime.java:473)
at java.lang.System.loadLibrary(System.java:771)
at
oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:228)
at oracle.jdbc.driver.OracleConnection.<init>
(OracleConnection.java:246)
at
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver
.ja
va:365)
at
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at
java.sql.DriverManager.getConnection(DriverManager.java:459)
at
java.sql.DriverManager.getConnection(DriverManager.java:139)
at JdbcCheckup.main(JdbcCheckup.java:35)

: The only oracle driver that vcan run with JDK 1.2.x is in the
OTN
: download area and is named "816SDK for JDK 1.2"
: it will work with the JDK 1.2.X using the JDBC 1.22 spec from
JDK
: 1.1.X.
: IT DOES NOT PROVIDE THE FULL JDBC 2.0 FEATURES/ FUNCTIONALITY
: THAT ARE INCLUDED IN THE JDK 1.2.X CLASSES.
Does anyone know which versions of Oracle this driver will work
with? I'm trying to use JDK 1.2 and Oracle 8.04 with the above
mentioned driver, but it's misbehaving on prepared statements:
I'm getting a 'ORA-8001 not all variables bound' error even
though I'm correctly specifying binary data (using
PreparedStatement.setBytes(..)) for a LONG RAW column...
Please don't tell me I have to upgrade my Oracle installation in
order to use JDBC with JDK 1.2.x
Feedback is greatly appreciated!
thanks!
// Tor Kleiberg
null

Linux : Oracle 8.1.5 and JDK 1.2

Hi!
I want to access Oracle 8.1.5 with JDBC.
I have seen that ODBC for 8.1.5 only works with JDK 1.0.* and 1.1.*, but not with
1.2.*
A JDK 1.2 - driver is only available for Oracle 8.1.6.
The other driver which was proposed before (from http://www.openlinksw.com/) only runs under Windows, not under Linux.
So the only thing I could do is:
a) Use Oracle 8.1.6 -> is it available for Linux, if yes, where can I find it (or an Upgrad for 8.1.5)
b) Use JDK 1.1.* -> (I do not want to do this ...)
c) Find another third-party driver for JDK 1.2 under Linux -> does anyone know where I could get one?
If anyone knows a solution for a-c, can you please answer?
Thanks,
Alex
null

Oracle8iR2's JDBC works fine with Oracle8.1.5.
You can download the new JDBC driver.
null

How can I uninstall a damaged installation of Fusion - PFRD 11.1.1.6.0 - Oracle Portal, Forms, Reports and Discoverer

Hello,
I am upgrading EBS 11i to 12i, Discoverer 4 to 11. After completing ebs installation and upgrade successfully, I am now working on the Oracle Fusion piece of the upgrade.
I have installed
1. JDK
2. Repository Creation Utility - RCU (schema)
3. Weblogic - WLS 10.3.6
4. Oracle Fusion - Discoverer 11g Release 1 Patchset 1 11.1.1.2.0 PFRD
5. Oracle Portal, Forms, Reports and Discoverer 11g Patchset 11.1.1.6.0 - Patchset 13517084
6. Executed config.sh and it failed with but continued.
During the Configuration of Oracle Fusion with config.sh there was failure at with "fails at creating data sources" and accidentally proceeded and all seem to go well until after shutting down the servers when Weblogic Managed Server is unable to start.
The start log indicated: "weblogic.store.PersistentStoreFatalException: [Store:280105]The persistent file store "_WLS_WLS_DISCO" cannot open file _WLS_WLS_DISCO000000.DAT." and I have been unable to find a solution for this error?
See log file error at https://dl.dropboxusercontent.com/u/15497130/oracle/ebs11/startManagedWebLogic.sh_nohup.out
If re-installation is my only option, then what are the steps to uninstall, and which components do I have to uninstall given that I had upgraded all the schemas involved?
Mathias

Hey,
You can always change the JDBC datasources in the Weblogic admin console . but have you recorded what is the specific error you got during the datasources creation .
I prefer...create a new user , give him sysdba privillages . Start RCU and create the DEV_DISCOVERER , DEV_DISCOVERER_PS schemas (prefix is your choice)
The Admin server will start . so go to admin console .
click services -> Data Sources
Check the data sources you have . edit each datasource and update the connection pool information .
after this you can start the Managed server WLS_DISCO
i believe this will solve this .........
if you still get issue again . you can try the link Using the WebLogic Persistent Store
Thanks
Naga

Install and config issues with Oracle Portal, Forms, Reports and Discoverer

For a while now I've been struggling with migrating a testing database to a newer version.
And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
What I've got:
Windows server 2008 R2 64bit
Oracle 11g database
Java 6u27 64bit
JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
JDK 1.7 64bit
Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
and a hanging up configuration
Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
Result - the config froze for approx.18 hours then failed
There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?

Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
the last thing the .out file shows:
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
[2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
     ... 18 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
progress in calculate progress4
progress in calculate progress4
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
Going to execute executeAfterConfig
java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
[2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
the other link you mentionned seems to have no relevance yet
does that clear up anything for you though?
..can the lack of SOA suite have anything to do with the problem?

Errors:Installing Oracle Portal, Forms, Reports and Discoverer on Win7

Someone can help me?
I installed Oracle Portal, Forms, Reports and Discoverer on Win7.
I have install:
jdk 64bit
Oracle db 11g (64bit)
Oracle Weblogic 1033 (wls1033_generic.jar)
Oracle Portal, Forms, Reports and Discoverer (ofm_pfrd_win_11.1.1.2.0_64/ofm_pfrd_win_11.1.1.3.0_64)
Configure Components Screen:I just choose the Oracle Forms/reports Oracle Forms/reports builder Enterprise Manager Oracle Web Cache .
Configure Ports Screen:Auto Port Configuration.
Specify Proxy Details Screen:No
Specify Application OID Screen:NO
But when I configure the "Configuring the Classic Instance" under the "Oracle Classic 11g-Home1". It's always pending in "Creating the domain". No any Error information.
the related log information:
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\as_2\install\config\\StartUtil64.dll

Since your weblogic is on version 10.3.3, you can only succesfully configure your fusion middleware when you are on version 11.1.1.3.
So (1) restart the install of fusion middleware 11.1.1.2, (2) choose install type INSTALL ONLY, (3) start installation of fusion middleware 11.1.1.3 and finally (4) configure fusion middleware using AS_ORACLE_HOME\bin\config.bat

JDeveloper 11g and JDK 1.4.2_16

Hi! I just created a new simple app in JDev 11g and selected the JDK 1.4.2_16 for the model project. I created a set of business components from tables, built the project and them attempted to run the AppModule tester.
I got the following error:
/usr/java/j2sdk1.4.2_16/bin/java -server -classpath /opt/app/oracle/product/jdevstudio1111/BC4J/jlib/bc4jtester.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jsyscat.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/db-ca.jar:/opt/app/oracle/product/jdevstudio1111/jlib/jdev-cm.jar:/opt/app/oracle/product/jdevstudio1111/lib/xmlparserv2.jar:/opt/app/oracle/product/jdevstudio1111/jlib/ohj.jar:/opt/app/oracle/product/jdevstudio1111/jlib/help-share.jar:/opt/app/oracle/product/jdevstudio1111/jlib/share.jar:/opt/app/oracle/product/jdevstudio1111/jlib/jewt4.jar:/opt/app/oracle/product/jdevstudio1111/jlib/oracle_ice.jar:/opt/app/oracle/product/jdevstudio1111/jlib/ojmisc.jar:/opt/app/oracle/product/jdevstudio1111/ide/lib/idert.jar:/opt/app/oracle/product/jdevstudio1111/ide/lib/javatools.jar:/usr/java/j2sdk1.4.2_16/jre/lib/rt.jar:/usr/java/j2sdk1.4.2_16/jre/lib/i18n.jar:/usr/java/j2sdk1.4.2_16/jre/lib/sunrsasign.jar:/usr/java/j2sdk1.4.2_16/jre/lib/jsse.jar:/usr/java/j2sdk1.4.2_16/jre/lib/jce.jar:/usr/java/j2sdk1.4.2_16/jre/lib/charsets.jar:/usr/java/j2sdk1.4.2_16/jre/classes:/home/mcruz/development/11g/SessionTest11g/.adf:/home/mcruz/development/11g/SessionTest11g/Model/classes:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adf-share-support.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adf-share-ca.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adf-share-base.jar:/opt/app/oracle/product/jdevstudio1111/jlib/identitystore.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jmt.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jwizard.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/groovy-all-1.0.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jct.jar:/opt/app/oracle/product/jdevstudio1111/jlib/commons-el.jar:/opt/app/oracle/product/jdevstudio1111/jlib/jsp-el-api.jar:/opt/app/oracle/product/jdevstudio1111/jlib/oracle-el.jar:/opt/app/oracle/product/jdevstudio1111/jlib/resourcebundle.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/api/jaxb-api.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/api/jsr173_api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/activation.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/sun.jaxb/2.0/jaxb-xjc.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/sun.jaxb/2.0/jaxb-impl.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/sun.jaxb/2.0/jaxb1-impl.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adfshare.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adfm.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/jlib/adfui.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adfbinding.jar:/opt/app/oracle/product/jdevstudio1111/adfdt/lib/adfdtatrt.jar:/opt/app/oracle/product/jdevstudio1111/adfdt/lib/adftransactionsdt.jar:/opt/app/oracle/product/jdevstudio1111/adfdt/lib/adfdt_common.jar:/opt/app/oracle/product/jdevstudio1111/mds/lib/mdsrt.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jazn.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jazncore.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-common.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-internal.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-fmw.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-unsupported-api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/jacc-api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/oc4j-unsupported-api.jar:/opt/app/oracle/product/jdevstudio1111/jdbc/lib/ojdbc5dms.jar:/opt/app/oracle/product/jdevstudio1111/jlib/orai18n.jar:/opt/app/oracle/product/jdevstudio1111/jlib/ojdl.jar:/opt/app/oracle/product/jdevstudio1111/jlib/dms.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jdomorcl.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/jlib/bc4jdatum.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/servlet.jar:/opt/app/oracle/product/jdevstudio1111/jlib/commons-cli-1.0.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/commons-collections.jar:/opt/app/oracle/product/jdevstudio1111/jlib/xmlef.jar:/opt/app/oracle/product/jdevstudio1111/lib/xml.jar:/opt/app/oracle/product/jdevstudio1111/rdbms/jlib/xdb.jar:/opt/app/oracle/product/jdevstudio1111/javacache/lib/cache.jar:/opt/app/oracle/product/jdevstudio1111/diagnostics/lib/ojdl.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/pcl.jar:/opt/app/oracle/product/jdevstudio1111/ucp/lib/ucp.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/oracle.javatools/11.1.1.0.0/dafrt.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/oracle.javatools/11.1.1.0.0/javatools-nodeps.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/jlib/bc4jui.jar:/opt/app/oracle/product/jdevstudio1111/dvt/lib/dvt-client.jar:/opt/app/oracle/product/jdevstudio1111/dvt/lib/dvt-utils.jar:/opt/app/oracle/product/jdevstudio1111/jlib/LW_PfjBean.jar: oracle.jbo.jbotester.MainFrame -X 116D6D52C8E -H jar:file:/opt/app/oracle/product/jdevstudio1111/jdev/doc/studio_doc/ohj/bc4j_f1.jar!/bc4j_f1.hs
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/jbo/jbotester/MainFrame (Unsupported major.minor version 49.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Process exited with exit code 1.
Am I to assume that jdk1.4.x is no longer supported in JDeveloper and that I should start using JDK1.5.x? But apps built with JDK1.5.x are not supported in AppServer 10.1.2.0.2, which is J2EE 1.3 compliant... Does that mean that JDeveloper 11g is suitable only for apps deployed on OAS 10.1.3.x and above? (OAS 10.1.3.x is J2EE 1.4 compliant, and OAS 11g will be J2EE 5.x compliant).
Comments please.
Thx!

be on OracleAs 10.1.3 at a minimum<<The problem (for us) with Oracle AS 10.1.3 is that Portal 10.1.4 will not run on it (not certified). We want to take advantage of ADF RC and we hope to be able to produce JSF portlets or "portletized" apps. But at the moment we are "stuck" with 10.1.2.0.2 and JDK 1.4.x/J2EE1.3...
While you can have a 10.1.2 farm and add a 10.1.3 separate instance it is not a clean/complete integration (you can't manage all services from the 10.1.2 farm EM and others; this is what I've seen so far, IMO).
We can't wait for OAS 11g to come out and take a look at that. And I certainly hope that Portal will be certifed on 11g so that we can just jump there.
Another wish: WebCenter functionality in Portal, or Portal/WebCenter rolled out into one.

Returning arrays using JDBC 2.0 and JDK 1.2.2

I am able to return a varray from an PL/SQL stored procedure to a Java program using the Oracle JDBC 8.1.6 driver classes (oracle.jdbc.driver.* and oracle.sql.ARRAY). I want to avoid using the Oracle specific classes to do this and instead just use the standard JDBC 2.0 classes and JDK 1.2.2. Will I still be able to access the varray returned by the PL/SQL SP or am I forced to use the Oracle classes?
Why I ask this is because the Java code needs to be usable from a Netscape Application Server 4.0/iPlanet Application Server 6.0 servlet or java class. NAS 4.0 uses the JDBC 2.0 classes but I cannot use the Oracle JDBC 8.1.6 classes since NAS 4.0 requires the Oracle 8.0.5 client. iAS 6.0 provides a JDBC 2.0 type 2 driver and uses the Oracle 8.1.5 client but does not support arrays, i.e. CallableStatement.getArray(), ResultSet.getArray(), etc. are not supported.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Craig Knelsen ([email protected]):
I am able to return a varray from an PL/SQL stored procedure to a Java program using the Oracle JDBC 8.1.6 driver classes (oracle.jdbc.driver.* and oracle.sql.ARRAY). I want to avoid using the Oracle specific classes to do this and instead just use the standard JDBC 2.0 classes and JDK 1.2.2. Will I still be able to access the varray returned by the PL/SQL SP or am I forced to use the Oracle classes?
Why I ask this is because the Java code needs to be usable from a Netscape Application Server 4.0/iPlanet Application Server 6.0 servlet or java class. NAS 4.0 uses the JDBC 2.0 classes but I cannot use the Oracle JDBC 8.1.6 classes since NAS 4.0 requires the Oracle 8.0.5 client. iAS 6.0 provides a JDBC 2.0 type 2 driver and uses the Oracle 8.1.5 client but does not support arrays, i.e. CallableStatement.getArray(), ResultSet.getArray(), etc. are not supported.<HR></BLOCKQUOTE>
can u plzz help me as to how u returned the
null

JDBC 8.1.6 (2.0) and JDK 1.2 java.sql.SQLException

I wrote an applet program and access to Oracle database using JDBC 2.0 (Oracle 8i 8.1.6). When testing, I got errors java.sql.SQLException: No suitable driver.
Who havd any idea to solve this problems.
It works fine when I use JDBC 1.2 and JDK 1.2 .
Chuleerat.

"No suitable driver" usually means that the
connect string is incorrect.
The 8.1.6 driver supports JDK1.1 and JDK1.2.
If you use JDK1.2, the JDBC 2.0 features
are available to you.
null

JDev 2 and JDK 1.2.2

How do I add JDK 1.2.2 as an option for JDev to use? I didn't find it in the JDev help? Did I miss it?

Company policy prevents me from download JDev 3 from the net. To order it, will take months. And Oracle for the sequent comes out way behind other platforms, so I cann't take avantage of JDev3's latest features.
So Can i just install JDK 1.2.2 and jdk 1.3 and use the "Define" button to include them in the list?

OC4J and JDK version compatibility

Does anyone know if OC4J 1.0.2.2.1 is certified to work with JDK1.3.1?
The reason being :
1. We have a situation where the CPU gets full frequently because of OC4J.
2. When OC4J is recycled the app works fine. App uses JSP, servlets and JDBC connection to Oracle 8.1.7
3. Is there any way to find if OC4J 1.0.2.2.1 is not supposed to be used with JDK1.3.1?
Finally, is there any URL that provides this information so that I can check the same with later versions of OC4J and JDK?
Thanks,

OC4J 1.0.2.2.1 is not certified with 1.3.1.x. Certification information should be available in http://metalink.oracle.com. You should have a CSI to get into Metalink.
thanks
debu

Install ORACLE 8.1.6 and 9i on HP UNIX 11.20 (11i)

Hi,
When I install ORACLE 8.1.6 and/or 9i on HP UNIX 11i (11.20, hardware: i2000 workstation), I got the following error message:
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target nnfgt.o of makefile
/opt/oracle/product/8.1.6/network/lib/ins_net_client.mk
Exception Severity: 1
Would appreciate very much if someone can help to analyse the cause of the problem.
Thanks.

Hi,
When I install ORACLE 8.1.6 and/or 9i on HP UNIX 11i (11.20, hardware: i2000 workstation), I got the following error message:
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target nnfgt.o of makefile
/opt/oracle/product/8.1.6/network/lib/ins_net_client.mk
Exception Severity: 1
Would appreciate very much if someone can help to analyse the cause of the problem.
Thanks.

Oracle Single Sign on and Oracle Internet Directory

Hello Gurus,
What is the relationship between Oracle Single Sign on and Oracle Internet Directory.
To my understanding, OID is required to install SSO.
If OID already exist, can we just install SSO and go on integrating it to existing OID.
Great Thanks,
vimal jain.
[email protected]

Hi Tim,
I've been working on this and could reproduce the issue with anonymous binds. A fix will be ready in 4.2.1.
So what I really need is the password used for login to pass to the is_member call.The P101_PASSWORD item does not save state. However, you can access the value during submit processing of the login page, for example in the post authentication function of your authentication scheme. People sometimes put code in there to query the user's groups (e.g. with apex_ldap.member_of2) and save them in an application. This item value can then be used in the authorization schemes.
Regards,
Christian

JDBC Problem with Oracle 8.1.7. and OC4J Version 2

I use the following connection statement with Oracle 8.1.7. and JDeveloper 3 and Apache Server. It works fine.
String user = "scott/tiger";
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:oci8:"+user+"@RDL");
The same program does not obtain the connection with JDeveloper 9i, OC4J Version 2 and Oracle 8.1.7. I do not receive any error message, no exception is thrown.
Please help me.

Hi Avi,
I had already tried the thin Diriver but after yout help I try again.
With this thin driver, I received a SQLException which helps me.
As usual, there were a lot of different problems. The main one was that my default configuration do not use the jdbc/lib817 main jdbc/lib. There is a classe12.jar in these libs that are apparently different.
Finally, I obtain the connection with the "thin" driver.
Thank you very much Avi!
Reni

Oracle 8.1.5 and jdk 1.2.2

Similar Messages

Maybe you are looking for