Oracle 8.1.7 Install ( Unix 11.0 )

I have installed Oracle 8.1.7.0.0 on a HP9000 Server running Unix 11.0. When trying to create a data base i get the follwing error.
oracle 21: svrmgrl
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
sh: /pr01/home/oracle/oracle/dist/8.1.7/bin/oracle: Execute permission denied.
sh: /pr01/home/oracle/oracle/dist/8.1.7/bin/oracle: Execute permission denied.
ORA-12547: TNS:lost contact
SVRMGR>
Any clues to what is going wrong.

These are installation instructions for Oracle8i (8.1.7) on Linux 7.2 (Your suggestions would be welcome).
1.     Login as root/password.
2.     Create the following groups.
a.     # groupadd osoper
b.     # groupadd osdba
c.     # groupadd osuser
d.     # groupadd oinstall
e.     # groupadd dba
9.     Create the user – ‘oracle’ with password as ‘oracle’.
a.     # useradd oracle –g oinstall –G osoper,osdba,osuser,dba (no spaces in between commas)
b.     # passwd oracle (when prompted, enter ‘oracle’ as oracle’s password)
Install the first set of Linux Patches:
(Remember all commands as well as folder-names are case-sensitive)
1.     Insert RedHat Linux CD2 to install the following patches.
2.     Close all GUI
3.     Open a terminal
4.     # cd /mnt/cdrom/RedHat/RPMS
5.     # ls compat*
6.     Three of these patches will be installed now:
# rpm –i compat-glibc-6.2-2.1.3.2.i386.rpm
# rpm –i compat-egcs-6.2-1.1.2.16.i386.rpm
# rpm –i compat-libs-6.2-3.i386.rpm
7.     # cd                (To get out of /mnt/cdrom)
8.     # umount /mnt/cdrom      (Unmount/Eject the CD to remove it).
Set up the Oracle Environment:
1.     Open a terminal window and connect as user – oracle:
# su oracle
2.     $ cd /home/oracle               (Mere $cd by itsel[i]Long postings are being truncated to ~1 kB at this time.

Similar Messages

Install Oracle 8.1.7 (TRU64 UNIX 5.1)

Need information on how to initate the istallation of Oracle
Software on TRU64 UNIX 5.1. Prior to 8.1.7, the "orainst" shell
for UNIX was used from the command line. The installation
instructions for 8.1.7 require the setting of the variable
DISPLAY, and the execution of the script "runInstaller". For
what I can tell, the new installation routine requires X-windows
to run, but I cannot figure out how to set it up.
Thank you in advance for any help on this subject.
Eduardo Bedoya

Dirk:
I had the same problem, which is caused by a
wrong version of Java. Follow the instructions
in Denis Claric's Oracle page:
http://staff.in2.hr/denis/oracle/
BUT do NOT install the RPM packages from the
RH7.1 CD-ROMs, get them from RedHat's web site instead.
-Ramon

Migrating Database from Oracle 8.0.5 for NT to Oracle 8.1.7 for Unix.

Hello!
Please help me in Migrating Database(Including Data,Stored
Procdures, Views, Indexes,Forms, Triggers etc.) from Oracle 8.0.5 for NT to Oracle 8.1.7 for Unix.

Check the installation option that you chose.
Not all of the options will install a database.
P.S.
I have a similar problem on NT.
Where I am able to access the database after the 8i Enterprise
Install. I can not access the database from a Developer or
Designer Installation. I am trying to run these tools locally.
How do I configure NET8 to access the local 8i Database?
Any ideas??
Regards, Jim
Emeka (guest) wrote:
: I just installed the Oracle 8 Enterprise Edition for windows NT
: and i can't find the Oracle database to support the tables.
Also
: the username and password of scott and tiger didn't work for
the
: SQL Plus.ERROR' ORA-12203: TNS: unable to connect to
destination'
: was the message when i try getting into SQL. Could someone
please
: tell me how to install the database and how to get the user
name
: and password for the SQL Plus.
null

ODBC driver for Oracle 8.1.5 in Unix

Can anybody tell me , how will I make sure that ODBC driver for Oracle 8.1.5 installed in Unix ?.

The Oracle ODBC driver is a Windows-only product. It won't install on a UNIX machine.
Justin

I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

Yes, it's possible, but if your Windows system is on a Boot Camp partition then you have to first remove it. Then create however many partitions you want for the operating systems. You have OS X on one, so you need two more - one for Windows and one for Linux. You then install Windows and Linux separately to their respective partitions. Download rEFIt
Use it as the replacement bootloader so you can properly boot from each OS properly.

Can Oracle Identity Manager be installed on windows vista operating system

can Oracle Identity Manager be installed on windows vista operating system?? I get the following error while installing OIM 9.1.0 on Weblogic application server 10.3.
userLanguage = en
userCountry = US
java.io.FileNotFoundException: <Installation Directory>\xellerate\logs\setup_weblogi
c.log (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileReader.<init>(Unknown Source)
at com.thortech.xl.installer.event.InstallScript.checkSetupLogStatus(Ins
tallScript.java:2280)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.invokeJavaMet
hod(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.executeAction
(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.run(Unknown S
ource)
at com.installshield.event.ThreadPool.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
at com.thortech.xl.installer.event.InstallScript.onExecutingPostInstallM
essage(InstallScript.java:1919)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.invokeJavaMet
hod(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.executeAction
(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.run(Unknown S
ource)
at com.installshield.event.ThreadPool.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Edited by: user10691333 on 28 Aug, 2011 12:05 PM

http://www.oracle.com/technetwork/middleware/ias/downloads/idm-certification-101401-083012.html
This is the cert matrix of OIM. Please check if you are using the right OS version.

Oracle 8.1.7 Install on RedHat 6.2

hey all, i've having some trouble with an Oracle 8.1.7 install on a vanilla rh6.2 server. The rh server has all the latest rpm upgrades installed as recommended by RedHat. When i run the installer script, i get this error message:
SIGFPE received at bfffef9c in /usr/oracle/data/Disk1/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/linux/nat
ive_threads/libawt.so. Processing terminated
any idea what the heck this is caused by? I haven't tried a 8.1.6 install on this box yet, might give that a shot just to see if it works. thanks for any help or pointers.
Jason

Hello,
i have a question about your updates: you run a system with glibc 2.2? -> forget it!
i try to install 8.1.7 on RH7 and i get the same error-message, i downgrade to RH6.2 (orginal, without updates) and its work!
Have alook to the topics with RH7 problems or use RH6.2 without updates(glibc)
marcel
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jason Holland ([email protected]):
hey all, i've having some trouble with an Oracle 8.1.7 install on a vanilla rh6.2 server. The rh server has all the latest rpm upgrades installed as recommended by RedHat. When i run the installer script, i get this error message:
SIGFPE received at bfffef9c in /usr/oracle/data/Disk1/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/linux/nat
ive_threads/libawt.so. Processing terminated
any idea what the heck this is caused by? I haven't tried a 8.1.6 install on this box yet, might give that a shot just to see if it works. thanks for any help or pointers.
Jason<HR></BLOCKQUOTE>
null

Fail to search Oracle Application Server while installing EM Grid Control

Fail to search Oracle Application Server while installing EM Grid Control 10.2.0.2 on Windows XP. All the steps are successful except the last step failed.
I uninstalled the previous Oracle 10g database using the stops of the following link:
http://krsethur.wordpress.com/2006/06/13/uninstalling-oracle-10g-manually-from-windows-xp/
Now I install EM Grid Control with a new database.
I don't have any MetaLink account now.
The log massage from G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
Command: oracle.sysman.emcp.agent.AgentPlugInThe log messages from C:\Program Files\Oracle\Inventory\logs\installActions2009-12-27_12-12-43...
Starting Agent
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception:
Management Agent Configuration Assistant is failed.
The following failed messages are recorded:
configureAgent: Search on a non-RAC system: Fail to search Oracle Application Server.
Info: Configuration Assistant "Agent Configuration Assistant" is fail.
*** Starting OUICA ***
Info: Created a new file G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
Info: Since the option is to overwrite the existing G:\OracleHomes\agent10g\cfgtoollogs\
        configToolFailedCommands file, backing it up
Info: The backed up file name is G:\OracleHomes\agent10g\cfgtoollogs\configToolFailed
        Commands.bak
Warning: OUI-25031: Some Configuration Assistant is failed. We recommend you to retry
        Configuration Assistant.
...I check all the related service and I can see all the related service are up except that the status of Application server is not running and the OracleCSService is in the starting status all the time.
G:\OracleHomes\oms10g>cd G:\OracleHomes\agent10g\BIN
G:\OracleHomes\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version     : 10.2.0.2.0
OMS Version       : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home        : G:\OracleHomes\agent10g
Agent binaries    : G:\OracleHomes\agent10g
Agent Process ID : 5812
Agent URL         : https://host1.localdomain:3872/emd/main/
Repository URL    : https://HOST1:1159/em/upload
Started at        : 2009-12-27 19:02:04
Started by user   : SYSTEM
Last Reload       : 2009-12-27 19:02:04
Last successful upload                       : (none)
Last attempted upload                        : (none)
Total Megabytes of XML files uploaded so far :     0.00
Number of XML files pending upload           :        4
Size of XML files pending upload(MB)         :     0.04
Available disk space on upload filesystem    :    41.63%
Last successful heartbeat to OMS             : 2009-12-27 19:02:25
Agent is Running and Ready
G:\OracleHomes\oms10g\BIN>emctl status oms
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Management Server is Up.
G:\OracleHomes\oms10g\BIN>emctl status iasconsole
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle 10g Application Server Control is not running.

Sorry, it's my mistake. what I am installing is Grid Control 10.2.0.2.
G:\OracleHomes\oms10g>cd G:\OracleHomes\agent10g\BIN
G:\OracleHomes\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version     : 10.2.0.2.0
OMS Version       : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home        : G:\OracleHomes\agent10g
Agent binaries    : G:\OracleHomes\agent10g
Agent Process ID : 5812
Agent URL         : https://host1.localdomain:3872/emd/main/
Repository URL    : https://HOST1:1159/em/upload
Started at        : 2009-12-27 19:02:04
Started by user   : SYSTEM
Last Reload       : 2009-12-27 19:02:04
Last successful upload                       : (none)
Last attempted upload                        : (none)
Total Megabytes of XML files uploaded so far :     0.00
Number of XML files pending upload           :        4
Size of XML files pending upload(MB)         :     0.04
Available disk space on upload filesystem    :    41.63%
Last successful heartbeat to OMS             : 2009-12-27 19:02:25
Agent is Running and Ready
G:\OracleHomes\oms10g\BIN>emctl status oms
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Management Server is Up.
G:\OracleHomes\oms10g\BIN>emctl status iasconsole
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle 10g Application Server Control is not running.Edited by: junez on Dec 27, 2009 4:18 PM

Oracle Clusterware and Oracle Real Application Clusters Install Guide

I've downloaded the latest "Oracle Database - Oracle Clusterware and Oracle Real Application Clusters Install Guide - 10g Release 2 (10.2) for HP-UX PA-RISC" (part no. B14202-01) dated August 2005 from OTN. I'm getting the following error when opening the pdf file in Adobe Reader:
"Cannot extract the embedded font 'PEPPLC+Palatino-Italic'. Some characters may not display or print properly."
When I print the manual, I get blank pages throughout the document which, in my opinion, should contain text and don't. Specifically pages 1-11, 2-5, 2-19, 2-24, 2-33, 3-5, 3-19 to name a few. When I go to those pages within the pdf file in Adobe Reader, I get the error: "There was a problem reading this document (114)."
Can you verify this problem on your end. Also, how do I get a good copy of this document?

Hi!
Apologies for the delay in responding to you. Please try the documentation library, part B19306-01 at URL: http://www.oracle.com/technology/documentation/database10gR2.html. Search for the part B14202-01 and click: pdf at top right. Part B14202-01 documentation pdf is currently displaying and printing on this end. The blank pages at the end of each main topic are inserted on purpose.
Another link to part B14202-01, on OTN is under the OEM, Oracle Enterprise Manager 10g Release 2 (10.2): http://www.oracle.com/pls/db102/portal.portal_db?selected=21
Thank you for your comments and feedbacks. Its much appreciated.
Main OTN, documentation URL: http://www.oracle.com/technology/documentation/index.html
Regards,
Chao

JAVA beans and JAVA related services require Oracle client to be installed?

Can you please advice whether an application server that make use of JAVA beans and JAVA related services require Oracle client to be installed? For an example if the solution build based on Java and JBOSS to be used as application server, do we still require oracle client to be installed and configure the tnsnames in order to communicate to database server?

SHANOJ wrote:
Can you please advice whether an application server that make use of JAVA beans and JAVA related services require Oracle client to be installed? For an example if the solution build based on Java and JBOSS to be used as application server, do we still require oracle client to be installed and configure the tnsnames in order to communicate to database server?Oracle client is not required when JDBC is used to connect to the remote DB

Oracle 8i is not installing

Dear Sir,
Oracle 8i is not installing in my system. The setup comes within a fraction of seconds without raising any error . I have PIV 1.5 GHZ with 128 MB RAM. I tried with Win NT,Win 2000,
Win 2000 Advanced Server, Win XP but i faced the same problem in all the versions. There is also problem with JRE and java.

There are problems with Pentium IV
Known Software Issue(s)
CPUID detection for Intel. Pentium. 4 processor system:
Intel has identified that applications which use the Symantec Just in Time Compiler library file ("symcjit.dll" for Microsoft Windows* operating system and "symc_jlt.nlm" for Novell Netware* 5.1) may not run properly on Pentium. 4 processor systems because the library does not properly identify the processor. The failure typically is that the affected application such as Oracle 8i, simply terminates. Under Microsoft Windows*, the properties of the DLL are: "Symantec Java! JustInTime Compiler Version 3.10.107 for JDK 1.2 Copyright (C) 1996-99 Symantec Corporation Dynamic Link Library file". DLLs older than this will also not work. To confirm the version you are using, select the DLL, right click on the selected DLL and select Properties, and then the Version tab. Intel encourages all Software developers to do the following immediately:
Check if your application(s) uses the Symantec Just in Time Library file
Request an updated library file from your provider
Test your application with the new library file on Pentium. 4 processor system
Ensure you have plans in place to provide application updates and address customer concerns
*Other brands and names are property of their respective owners
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the post-install
configuration tools will also be affected. Running these tools with "-nojit"
specified will avoid the hang, but it is not simple to specify "-nojit" for
some of the products.
The following workaround works for the Windows operating system:
a. Copy only the install directory from the CD to the hard disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications (Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard drive (i.e.
e:\temp\install\win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the absolute
locations are specified.
Choose a Custom install and choose not to create a database during the
install. This way, the Database Configuration Assistant will not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and there is no way
to suppress it. You will need to kill the Net8 Configuration Assistant if it
hangs due to the bug. The installation still will have been successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8 Configuration
Assistant" and click "Stop". If that does not work, look for the most recent
JRE process using the Task Manager, and kill it manually. NOTE: the OUI
itself will also have a jre process. Be sure to kill the one with the most
recent date, which should be the jre process being used for Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through the installation
to the "End of Installation" screen, you should modify the configuration tools
to use "-nojit", then call the appropriate tools from the Start Menu.
Once installation is complete, each of the following files in the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit -classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4 (IV) PROCESSORS
INSTALLER FAILS WHEN RUNNING ON NEW INTEL PENTIUM 4 (IV) PROCESSORS

Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a "stuffer" document that has a barcode, and Unix jobs automatically send the document to a printer. Is there a way, or does Adobe have a produc

Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a “stuffer” document that has a barcode, and Unix jobs automatically send the document to a printer.
Is there a way, or does Adobe have a product or solution, to create a PDF version of the document including the barcode, before it’s sent to a printer?

What format is the document that is printed? Or what technology is used to format the printer? There isn't a standard way of doing things in Unix.

How could I check whether Oracle Enterprise Manager is installed or not ?

Customer uses Oracle DB 11g.
How could I check whether Oracle Enterprise Manager is installed or not ?

If you are using EM DB Control then you run this command,
$ORACLE_HOME/bin/emctl status dbconsole
HTH
Mani

Oracle R12.1.2 install on oracle linux 6.3

Hi,
i have installing Oracle R12.1.2 install on oracle linux 6.3 (VIS instance ) but it has fail end of the installation with following error code
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Thank you
Thilina

Hi Thilina,
Please confirm you have installed all the rpms mentioned as per the notes provided by Hussein. Please verify whether you have installed all the rpms mentioned in the per-requisite setup by command:
rpm -qa | grep <rpm_name>*
In addition, please upgrade your rapidwiz when installing especially on OEL 6 as most of the issues are addressed in the latest rapidwiz and perform a fresh installation.:
https://blogs.oracle.com/stevenChan/entry/new_rapid_install_startcd_12
Please also provide the output of:
find / -name libclntsh* (as root user)
A workaround is mentioned in this site, Please check whether this helps you and let us know:
Installation of Oracle R12.1.1 on Linux 64 bit machine | Oracle Application Technology
Thanks &
Best Regards,

Oracle Linux in 11gR2 install documentation?

http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CHDFFBIF
Oracle® Database Installation Guide 11g Release 2 (11.2) for Linux
Oracle Unbreakable Enterprise Kernel for Linux 5 Update 5 (2.6.32) and above, available for x86-64 systems, contains several additional features and performance enhancements not available either with Oracle Linux or with other supported Linux distributions. This kernel can be installed on either Oracle Linux or Red Hat Enterprise Linux distributions. Before installing the Oracle Unbreakable Enterprise Kernel, you must have Oracle Linux 5 Update 5 or Red Hat Enterprise Linux 5 Update 5 installed on an x86-64 server.
Is this information correct? Perhaps the following was better:
Oracle Unbreakable Enterprise Kernel (UEK) for Linux 5 Update 5 (2.6.32) and above, available for x86-64 systems, contains several additional features and performance enhancements not available prior to Oracle Enterprise Linux 5 update 5 or with other supported Linux distributions. This kernel can be installed on either Oracle Linux 5 Update 5 or Red Hat Enterprise Linux 5 Update 5 installed on an x86-64 server. As of Oracle Linux 5 update 6, the Oracle Unbreakable Enterprise Kernel is the default system kernel. A 32-bit release of Oracle Linux including the Oracle Unbreakable Enterprise Kernel is available with Oracle Linux 5 update 7 and later.
Edited by: Dude on Feb 29, 2012 5:23 PM

Hello
you can follow me article:
Oracle desde Guatemala &raquo; Blog Archive &raquo; Instalar Oracle Database 12cR1 en OEL 6 con ASM
Greetings,

Oracle 8.1.7 Install ( Unix 11.0 )

Similar Messages

Maybe you are looking for