Oracle EBS Based and Interface tables
Hi,
Where can I find the list of all Based and Interface tables used in Oracle EBS R12 Applications. OM, INV, AR, AP, GL, & PO (Purchasing).
I have been told that they are available in "My Oracle Support" please send me the path.
Thanks,
Amorsolo.
Please see old threads, it should answer your question -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Interface+AND+Tables&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein
Similar Messages
-
Oracle EBS Inbound/Outbound Interface build using Oracle SOA 11g
Hi SOA Guru's,
I am very much new to SOA 11g, could you guy's help me in understanding "How I can build any Oracle EBS Inbound/Outbound interface using Oracle SOA 11g"
It will be great if anybody explain me with any example script/screen shot/document.
Thanks in advance.
Regards
PankajI don't have any experience with ebs, but i assume it works like this.
In the composite editor you will find a list adapters at the right..over here you will also find the oracle applications (ebs) adapter.
This will be the component for you which will communicate with the ebs packages.
you need to drag this adapter on the swim lane, and after that you should create the composite application like the way it's described in the tutorials Oracle supplies, put a mediator component in the middle and expose this interface (drag the line to the left swim line)
Hope it's a bit clear like this ?
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/fod_intro2.htm
this should make a few things clear too -
Memory and No. of Processor calculation for Oracle EBS R11 and R12
Can some one please tell me …. How to calculate required Memory and No. of Processors for Oracle EBS R11 and R12.
For example we have 50 Concurrent users and 100 named (i.e. the users which are doing only Data entry.), so how to How to calculate required Memory and No. of Processors
Please guide me on the same.
Thanks,Please refer to the following links, it may be helpful:
Oracle Applications Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers-e-business.html
Oracle Applications Standard Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers.html
Hardware requirements for Oracle APPS
Hardware requirements for Oracle APPS -
Why Base and interface tables mandatory column are differant ?
Hi guys , i have load supplier into AP(ap_suppliers) through Interface table(ap_suppliers_int) but my confusion is that ap_suppliers have 8 mandatory columns but it's interface ap_suppliers_int have only 2 mandatory column.why?and also with these 2 columns record is successfully loaded into base so how it's get other mandatory columns value in base table or leave it .
Regards,
Shakeel khan
Edited by: shakeel khan on Mar 14, 2010 8:32 AMHi,
Refer to Oracle Payables Reference guide, section "Understanding the Suppliers Open Interface Tables"
Here is an extract:
The intent of the Supplier Open Interface Import is to emulate the entry of Suppliers,
Sites, and Contacts through the Supplier Entry form as closely as possible. As such,
there are many values that will be automatically defaulted if not provided by the user.
These defaults for Suppliers can come from AP_SYSTEM_PARAMETERS_ALL,
FINANCIALS_SYSTEM_PARAMS_ALL, PO_SYSTEM_PARAMETERS.ALL,
RCV_PARAMETERS, or hard-coded values. As these source tables are organized by
operating unit and the supplier data is not, the Suppliers Open Interface Import
program assigns a default organization to each run based on the responsibility of the
user initiating the concurrent request. This is necessary in order to determine which
default values to assign to supplier records.
The defaults for Supplier Sites generally come from the Supplier record. However, in
certain cases due to multiple organizations considerations, it is necessary to default
values for Supplier Sites from AP_SYSTEM_PARAMETERS_ALL or
FINANCIALS_SYSTEM_PARAMS_ALL.
J. -
Import standard Purchase Order process and interface tables
Hi all,
We are populating three PO interface tables from our custom developed application. PO_HEADERS_INTERFACE, PO_LINES_INTERFACE and PO_DISTRIBUTIONS_INTERFACE. We are using 11.5.10.2 version of Oracle Apps.
Initially we did not manage to populate the distributions interface table, but, now we are populating it. And after doing so, when we run the Import standard Purchase Order process for 'Approved' POs, the process_id for even the record which has correct distributions info also gets 'Rejected' as a value. The process is considering a mix of records : the approved POs that DO NOT HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE (which we had not managed to populate) and the approved POs that HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE.
does the Import standard Purchase Order process populate partial data that could be good or it rejects the whole lot of records?
Can anyone guide on this issue?
Thanks and kind regards,
Aparna
Edited by: Aparna on Jul 24, 2009 3:45 AM
Another piece of info I would like to share is
I have run the process for an approved PO with distributions info in PO_DISTRIBUTIONS_INTERFACE. This time no mixed data. In PO_INTERFACE_ERRORS table, an entry was found: for column name : PO_DISTRIBUTION_ID in ERROR_MESSAGE column 'Error: Has no distributions'.
Edited by: Aparna on Jul 24, 2009 8:03 AM
After carrying out number of tests, I have found out that
1) if the approval_status for the po is 'Approved' in the po_headers_interface table, it gives the above mentioned error and the process_id is 'rejected'.
2) if the approval_status for the po is 'Incomplete' in the po_headers_interface table, the process add the 'accepted' value for the process_id. But, the charge account number is not populated in shipments.
Edited by: Aparna on Jul 31, 2009 1:07 AM
There has been some progress on this issue. The process sees distributions data into the PO_DISTRIBUTIONS_INTERFACE table. Yet the following errors are found in the process log file:
Start dist default process
before getting period name
after getting period name
-->Intfc error occurred ...PO_PDOI_INVALID_GL_ENC_PER
before workflow
unit price = 18.5, rate = , unit price in functional currency = 18.5
after workflow
Start dist creation process
Start dist validation process
-->Intfc error occurred ...PO_PDOI_INVALID_BUDGET_ACCT
Start insert new record into po_distributions
Distribution ID: 252
dist num: 1
last updated by: 1189
po header id: 5283
po line id: 5878
line loc id: 5924
sob id: 21
cc id: 1560
qty ordered: 10
Req Header Ref num :
Req line Ref num :
Req dist id :
ROW ID: AAHUc1AFPAAAQ04AAC
call tax
Rollback for the Last Errored Line: 10
All Lines in error - Rolling back the header
We opened new GL periods for the calendar and yet same errrors are seen. Can anyone suggest any solution?
Kind regards,
AparnaHi
Do you have a copy of your insert statement?
regards -
Cold Oracle EBS backup and restore doesn't work
Hi,
I did a backup using tar while the database was open and not in archive mode ( archivelog disabled ) and restored it on another machine.
OS = AIX 5.3
Oracle EBS 11.5.9
Database 9i
When i started the database I got errors.
Is there a metalink document which will help me recover the database ?
I followed the following metalinks:
Database Startup Fails with ORA-01113, ORA-01110 errors [ID 146039.1]
Common Causes and Solutions on ORA-1113 Error Found in Backup & Recovery [ID 183367.1]
However, I would like to point out that the above is applicable in case of archivelogs = enabled
My case: archivelogs = disabled
SQL> startup mount pfile=/oracle/proddb/9.2.0/dbs/initPROD.ora
ORACLE instance started.
Total System Global Area 615482512 bytes
Fixed Size 742544 bytes
Variable Size 436207616 bytes
Database Buffers 167772160 bytes
Redo Buffers 10760192 bytes
Database mounted.
SQL> SELECT V1.FILE#, NAME
FROM V$BACKUP V1, V$DATAFILE V2
WHERE V1.STATUS = 'ACTIVE' AND V1.FILE# = V2.FILE# ; 2 3
no rows selected
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 3368247542 generated at 02/10/2013 03:07:21 needed for thread
1
ORA-00289: suggestion : /oracle/proddb/9.2.0/dbs/arch1_637.dbf
ORA-00280: change 3368247542 for thread 1 is in sequence #637
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/proddata/system01.dbf'
ORA-01112: media recovery not started
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 3368247542 generated at 02/10/2013 03:07:21 needed for thread
1
ORA-00289: suggestion : /oracle/proddb/9.2.0/dbs/arch1_637.dbf
ORA-00280: change 3368247542 for thread 1 is in sequence #637
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log '/oracle/proddb/9.2.0/dbs/arch1_637.dbf'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/proddata/system01.dbf'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/proddata/system01.dbf'
SQL> select HXFIL File_num,substr(HXFNM,1,40) File_name,FHTYP Type,HXERR Validity,
FHSCN SCN, FHTNM TABLESPACE_NAME,FHSTA status ,FHRBA_SEQ Sequence
from X$KCVFH;
419 rows selected.981553 wrote:
I understand that Hot backups cannot be done with noarchivelog and data will be inconsistent.
However, shouldn't the Database be able to recover whatever data is in there in the datafiles and startup normally. From where should it be recoverd, only if we store the data changes in a separate files. These files are called archive logs. The archive logs will be generated when you enable archive log.
This is my question and concern. I searched for Metalink and couldn't find anything on it.
I want to startup the database with whatever Data is present there after the backup. Any solutions for such a scenario ?
ORA-00279: change 3368247542 generated at 02/10/2013 03:07:21 needed for thread
1
ORA-00289: suggestion : /oracle/proddb/9.2.0/dbs/arch1_637.dbf
ORA-00280: change 3368247542 for thread 1 is in sequence #637
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}When it asks for change number "637" and if you are lucky enough that the redo log file with this sequence is not over written then that redo log file can be given as input when it asks as above.
But again, all these tries are for nothing. At the end of the day if your database is in no archive log mode the reliable backup is only the one taken using cold backup method. i.e. by shutting down the database.
Thanks -
Mapping Roles/Groups between Oracle EBS R12 and OBIEE 11g
Hi,
We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12.
But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior experience with EBS as source system.
Can anyone tell how to map between obiee groups with Oracle E-Business suit R12
Is there any document link or notes regarding this.
Any information regarding this will be a great help.
Thanks in advanceHi,
I am also looking for the solution to implement SSO of OBI 11g with EBS r12, what i understand from your post that you have configured SSO between OAM and EBS R12.
Below is the link to configure SSO between EBSR12 and OBI 11g.
http://www.astcorporation.com/images/PDFs/White_Papers/2012/AST_White_Paper-EBS-OBIEE_11g_Integration.pdf
I want one clarification from you , once you read the above article what is your opinion do we require OAM integration if we want only EBS SSO with OBI11g ? I am bit confused in this ?
Whats the use of OAM in this integartion ?
Can you please help me.
Thanks in Advance.
Regards,
Tarang Jain -
Oracle EBS HR and Fusion HCM comparison
Hi All,
Can someone give me comparison of EBS HR and Fusion HCM organization structure? For example, in EBS HR we have business group. What is the comparable object in Fusion HCM? Likewise, what are the other one to once comparison in organizational hierarchy? And what are the new levels added / removed in Fusion HCM?
Thanks,
CAHHave you looked at the documentation and see if it helps?
Oracle Fusion Applications Documentation
Oracle E-Business Suite Documentation
I'm not sure if you can find a comparison documented at Oracle websites so you might log a SR and see what Oracle support would suggest.
Thanks,
Hussein -
Oracle Product hub WEBADI Interface Tables
Hi All ,
We are trying to develop and API so that in WEB ADI we can extrcproduct ctalogue data nd directly load it in to WEB ADI Interface tabel so that it directly load data in to data base .
Instead of extracting from one environment and load in other environment.
please help me to find out about Interface tabels used for WEBADI.
PraveenHi Helios,
Thanks for your response. Two of the links do not work.
All I really need to know for sure is that R12 supports open interface tables.
Perhaps I didn't use the embedded R12 iRep correctly - the standard view by product family certainly didn't show any open interface table, and they did not appear in the 'interface type' drop down list. However, I notice from an example on the web that you can pivot the results by interface type. I will try that when the environment becomes available again.
cheers,
John -
Oracle EBS constraints and integrity
Hi,
Can anybody please explain me why Oracle EBS doesn't use referential integrity defined in the database?
thanksHi;
Can anybody please explain me why Oracle EBS doesn't use referential integrity defined in the database?I belive its use. Please see:
http://blogs.oracle.com/stevenChan/2008/04/comparing_oem_data_masking_and.html
http://www.linkedin.com/answers/technology/information-technology/databases/TCH_ITS_DBS/498465-17381239
11i System Item KFF Item Segment Length Reduction [ID 376210.1]
Regard
Helios -
Oracle EBS R12 and user account
Hi All,
I been searching through the administration guide / security guide but I cannot find where we can set the number of time a user can try to log in before his account get locks. Does anyone know?
Thank,
FelixIt is a profile option "Signon Password Failure Limit". See MOS Doc 564125.1 (How to setup Password Security?)
HTH
Srini -
Names of interface tables and interface programs of oracle modules
Hi all,
i need urgent and accurate information about the names of interface tables and interface programs of the following oracle modules,R12, or either ther are custom made. Any accurate link refering to the desire information would be much appreciated.
Plus i need a clear and simple definition and purpose of interface tables and interface program and by what other names are they known in industry.
Data Object,Oracle Module
Chart of Accounts,Oracle General Ledger
Trial Balance,Oracle General Ledger
Supplier Master,Oracle Payables
Open Supplier Invoices,Oracle Payables
Open Supplier Credit/ Debit Memos,Oracle Payables
Open Supplier Advances,Oracle Payables
Bank Master,Oracle Cash Management
Customer Master,Oracle Receivable
Asset Categories,Oracle Assets
Asset Master,Oracle Assets
Item Master,Oracle Inventory
Item Categories,Oracle Inventory
Sub Inventory and Locators,Oracle Inventory
Item On Hand Balances,Oracle Inventory
Item wise Per unit Cost,Oracle Inventory
Bill of Material,Oracle Discrete Manufacturing
Departments,Oracle Discrete Manufacturing
Operations,Oracle Discrete Manufacturing
Routings,Oracle Discrete Manufacturing
Resources,Oracle Discrete Manufacturing
Overheads,Oracle Discrete Manufacturing
Employee Master,Approval Hierarchy
Approval Hierarchy,Approval Hierarchy
Open Customer Invoices,Oracle Receivables
Open Customer Credit/ Debit Memos,Oracle Receivables
Open Customer Advances,Oracle Receivables
Pending Requisitions,Oracle Purchasing
Pending Purchase Orders,Oracle Purchasing
Open Sales Orders,Oracle Order Management
Price List,Oracle Order ManagementHi;
Its metalink note you need to login metalink wiht valid CSI(customer Support Identifier) number to can se note via using note number.
Please see:
Oracle EBS Based and Interface tables
Oracle EBS Based and Interface tables
Regard
Helios -
APEX and 11.5.10 Payables Open Interface Tables
Hi,
Wanted to see if APEX would be a tool that could be used to connect to oracle application interface tables and load data from a spread sheet into the ap_invoices_interface and ap_invoice_lines_interface tables. Once this is done the information could be interfaced into the application.
Has anyone done this?
Thanks in advance for any responses.Scott,
Do you have experience in how to populate Oracle eBusiness Suite Open Interface tables with Excel-data using a APEX form/report/process?
If so, can you give me a clue how to do it? Uploading CSV will not work, because of treating text-fields as numbers. Our item numbers look like numbers, but must be handled as text. Example: 002.112.002
Regards,
Geert. -
Capture XML data payload into database table (Oracle EBS R12)
Hi All,
We have a XML Publisher report which generates output in PDF format. We want to capture the XML data payload generated by this report and put it into a DB table once the PDF is generated.
This report is generated through Oracle EBS R12 and XML Payload is stored by oracle by default in $APPLCSF/out directory.
Any pointers would be helpful
brCouple of options, this one is probably the easiest without knowing other requirements (e.g., do you have to store the output as XML, or do you just the data available so you can output in XML later?).
Capture the SQL statement that generates the output in the first place. If you have that statement, you can insert into some table using the select statement. Once you have the report data (and you can tag that particular set of data with a job ID, timestamp, whatever, in case you need to store it and distinguish it from other reports down the road), you can generate XML output using the PL/SQL built-in DBMS_XMLGEN.
Is that what you are looking for? -
Integration HP Planning and Budgeting to Oracle eBS.
hey guys,
i am very new to Hyperion and i want to know how to integrate Hyperion Planning and Budgeting to Oracle eBS.
thanks and regards,
Rahul.Hello,
Unfortunately there is no prebuilt package that makes "Planning the source for OracleEBS". Right now the ERPi software you are looking at will only control budgetting information. You can review the current compliance of the software by doing a review of the documentation under the chapter "Data Write-back Rules".
If you are looking to source pure data from Planning into OracleEBS then a custom solution will need to be developed and maintained outside of the Hyperion software .... or built to plug into the Hyperion Software (like ODI).
Thank you,
Maybe you are looking for
-
Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)
All, we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28. The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown: Message
-
Email not going to particular user id
hi, when i send a email form SO01 transaction to a particular user with name say abc @ <xyz.org the user is not receiving the mail. But when i send mail from SO01 to any other user say efg @ xyz.org or yahoo e mail id, g mail id, the users are receiv
-
Is muse tutorial on SEO totally out of date
First off I must say I am a complete beginner here. From what I have read the Muse tutorial on SEO like most of the search returns on Google is totally out of date. I have read that google does not take notice of Meta tags or descriptions or H1 type
-
I tried to set my alarm last night and discovered the "beep" function only works when the "clicker" is turned on. It also only beeps once, not reliable enough to wake me up. Maybe apple will change this with the next software update.
-
I recently purchased a Canon 5D Mark III and I was using LR3. When I realised that LR3 was not compatible with the Mark III ras files, I purchased LR5. Once all of my images loaded up, I then worked out that all of my presets that I have collected an