Oracle matrix report split in two pages

hi,
my matrix report is spliting in two pages. All columns are ok but the total of the columns shows *** due to length problem so i increase the columns width and the report goes in two pages now.
Is there any way to show the totals in without decresing the width eg..
123456789111
can be shows like
1234567
89111
i already using smallest fonts
thanks

helloooooooooooooooooo

Similar Messages

Report Header split across two pages in preview

Hi there,
I've got a full page of A4 text as my report header which works fine in the Design view. However, in preview it splits across two pages leaving about a quarter at the bottom of the first page blank. The text should easily fit on one side of A4 - any ideas why it's being split?
Thanks

Hi
Ideally if you have inserted a cross tab on the report header, then it might split into more than one page.
Please ensure that you have not put a cross tab on the report header. You can also switch to Landscape and check if it fits the report header in one page.
Hope it helps.
Regards
Sourashree Ghosh

Oracle Matrix Report output to XML Publisher

We have an Oracle matrix report (rdf) registered in our applications and we are trying to format the report output using XML publisher.
I have taken XML output of the report by changing the Report output to XML in concurrent program definition. Using this XML output we have started designing the RTF template using Template Builder for Word 5.6.2.
I am not able to get the MAtrix output in XML publisher. I am not sure how to design a Matrix Report using Template builder for word. I am not sure whether the XML output of Original Report has Tags mentioning Matrix report attributes or Not.
Can anyone help me by explaining how to design a Matrix Report template using XML report output. Appreicate your help.

I have posted a Blog on our blog site about how to create a matrix report in XML-Publisher
http://technology.amis.nl/blog/?p=1558
Perhaps this helps.
Marcos

How to stop table row from being split onto two pages

How do I stop a row of output from being split between two
pages. When the CFDocument loads, sometimes, the last row on a page
"spills" over onto the next. I'd like to figure out who to prevent
these "orphans" from happening, and force the row onto one page or
the other.
Here's my code for the doc... I have a sp that querys the sql
db. Using CFDocument - CF Version 7.02

If you know roughly how many lines of output will fit on a
page (you can test to find out), then you can count result lines
(you should be able to use RecordCount and do some math) and cfif
against your counter and force a page break beforehand if the next
table will be too much to fit on the page. Then just reset the
counter after you page break.

Scramble layout when split a large matrix report in separate PDF page

Dear All,
I have large matrix report, and set the destype=cache, desformat=PDF, width=11, height=8.5 (at Main Section property).
This report running well and resulted PDF file.
But the problem is in the layout, i got a scramble layout and sometimes there are empty boxes.
I thinks, this cause of the matrix size exceed the size of section (width & height at Main Section property).
Anyone have solution for this?
Thanks before..............

Must admit that I never saved as txt
Looks like a bug to me. What is the version of reports?
Marcos

Need to print a report that has two pages but based on condition

Hi
Can someone help me. I have a report that has 2 pages and I need print it but not boths pages at the sametime.
I have code ( the conditions)like this
If (A=Y) then
print Page 2
else print page 1
end if;
Note: Where would I put the code. Please
Thank you

Some folks have written JavaScripts for such needs, but for only 6 pages I would simply do the following. 1. Crop all pages to show 1 and 4. Then print to a new PDF (not optimum, but will do the job). 2. Repeat for 2 and 5. 3. Repeat for 3 and 6. Now open one of them in Acrobat and the use insert pages to insert the other two files. Now rearrange the pages using the Pages display and save. That should do the job.

Matrix Report overflows to other page

We have a Matrix Report (Report Builder 6.0.8.20.1) with a lot of columns. The report is in landscape style, but still the matrix will not fit horizontally.
The second part of the matrix will be displayed on the next page, while there is enough space to display the second part of the matrix on the same page, below the first part of the matrix.
Does anyone know why Report Builder has this behaviour?
Thanks in advance,
Lennart de Vos
PS: All properties Page Protect, Page Break Before/After have been set to "No". The property Print Direction of the repeating frames in the Matrix cannot be changed

hello,
if i understand correctly, the matrix overflows in the horizontal direction to another page and you would like this part to show up below the first part on the same page insead ? much like wrapping the matrix ?
unfortunately reports does not support wrapping of layout objects. if a layout object exceeds the page in any direction the overflow part will be pushed to another page.
thanks,
ph.

How to get a report split on a page

I have a situation with a report where I have 3 columns.
If I run this report I see a long list with 3 columns.
How can I get this so that that I have these 3 columns scaled horizontaly?
I want to get this so that you see more information on the screen.
col1 || col2 || col3 col1 || col2 || col3
data || data || data|| data || data || data
etc.
Please can somebody give me an advice?
Thanks,
Edward

Not claiming that it's a brilliant idea, but it does seem to get it done using only SQL:
hr@xe > with t as (
2        -- Get the column values in desired order with row numbers and a count of
3        -- the total rows retrieved
4        select
5                  e.last_name
6                , row_number() over (order by e.last_name) rn
7                , count(*) over () n
8        from
9                  employees e)
10    , u as (
11        -- Assign the data to the required number of columns (= buckets)
12        select
13                  last_name
14                , rn
15                , width_bucket(rn, 1, n, 3 /* no of columns */) col
16        from
17                  t)
18    , w as (
19        -- Find the number of rows in the longest (i.e. first) column
20        select max(count(*)) c from u group by col)
21    , x as (
22        -- "Pivot" the set into the required number of columns
23        select
24                  u.last_name l1
25                , lead(u.last_name, c) over (order by u.rn) l2
26                , lead(u.last_name, 2 * c) over (order by u.rn) l3
27        from
28                  u, w)
29        -- Trim off duplicate data after the required rows are displayed
30 select x.l1 , x.l2 , x.l3 from x, w where rownum <= w.c;
L1                        L2                        L3
Abel                      Gietz                     Olsen
Ande                      Grant                     Olson
Atkinson                  Grant                     Ozer
Austin                    Greenberg                 Partners
Baer                      Greene                    Pataballa
Baida                     Hall                      Patel
Banda                     Hartstein                 Perkins
Bates                     Higgins                   Philtanker
Bell                      Himuro                    Popp
Bernstein                 Hunold                    Rajs
Bissot                    Hutton                    Raphaely
Bloom                     Johnson                   Rogers
Bull                      Jones                     Russell
Cabrio                    Kaufling                  Sarchand
Cambrault                 Khoo                      Sciarra
Cambrault                 King                      Seo
Chen                      King                      Sewall
Chung                     Kochhar                   Smith
Colmenares                Kumar                     Smith
Davies                    Ladwig                    Stiles
De Haan                   Landry                    Sullivan
Dellinger                 Lee                       Sully
Dilly                     Livingston                Taylor
Doran                     Lorentz                   Taylor
Ernst                     Mallin                    Tobias
Errazuriz                 Markle                    Tucker
Everett                   Marlow                    Tuvault
Faviet                    Marvins                   Urman
Fay                       Matos                     Vargas
Feeney                    Mavris                    Vishney
Fleaur                    McCain                    Vollman
Fox                       McEwen                    Walsh
Fripp                     Mikkilineni               Weiss
Gates                     Mourgos                   Whalen
Gee                       Nayer                     Zlotkey
Geoni                     OConnell
36 rows selected.Happy to see someone simplify it...

Report with two pages

hi all
I am designing a report which has two pages , i completed first page, i need to insert second page
how to design report with two pages
Thanks in advance
Krish

Hi,
Usually,any report automatically adjusts its page numbers as per the quantity of data that needs to be displayed.However, if your specific requirement is to show certain data on one page and the remaining on another then you can simply insert a group on a valid field.
Following is some information from the Crystal Reports Online Help menu:
New Page After:
- When the End of Section check box is selected, the program inserts a page break after the section.
- The Page Header and Page Footer appear on each page.
- Use New Page After in the Group footer section to print each group on a separate page.
May be, if this is not what you are looking for then please elaborate on the report design/data

OfficeJet 8500A. Single print job prints half on two pages.

I have an OfficeJet 8500A Premium for about a year now. All was working well, until recently.
I'm using Firmware Version: LRP1FN1126AR
Now, when I send a print job that's supposed to be on a single page, it prints half on two pages. This, of course, wastes my ink, paper, time, energy, and sanity. I've searched around and can't find a resolution to this problem.
I posted a picture of the problem I'm experiencing, personal info areas blurred out. The only way to fix this, which is a temporary fix, is to turn the printer on and off. That seems to correct the problem, but only for a short while, since it will eventually start printing single print jobs split on two pages.
Please help. Thanks.

It sounds like the driver for the printer and the driver for the IE9 are having a conflict. I would advise trying to open the same page in a different web browser to see if the problem follows multiple browsers, or only IE9.
Also, I would try reverting back to IE8 as a possible workaround. If none of these are able to get the printouts desired, then I would look at Shane_R's thread on using an alternate driver located here.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How to divide footnotes over two pages?

Im typesetting a book with hundreds of (sometimes long) footnotes. I want a rule above the first footnote of the page. I also want footnotes to divide over two pages, if necessary. I had no problems with this in CS4 (but maybe the circumstances were different). Now I'm using CS5.
Problem one: when there are more footnote references in the same paragraph at the bottom of the page, all the footnotes go to the next page, even when there is enough space for at least part of the first footnote. I have a workaround for it (only leave the first footnote reference in that paragraph, move the other references to somewhere on the next page, setting the text color to none, and put fake references on the original positions), but that's not ideal. Am I overlooking something?
Problem two: I set the rule dividing body text and footnotes to 0,3 pt an 40 pt length. With a footnote split over two pages, this goes well for the first page, but on the second page there now is a thick, much longer line (the system standard rule for footnotes?). This problem didn't occur in CS4. Anyone knows whether this will be fixed? Suggestions for a workaround? Or did I do something wrong?

Thanks for your answer.
First problem: I checked this, there is no difference when I uncheck the Keep Lines Together option. As for the Keep with Next option, I couldn't even imagine what would happen with 700 footnotes... Anyway, using the trick I mentioned solves the problem (the first footnote in the paragraph splits correctly over two pages).
Second problem: Strange - I have a Dutch language version and I can't find anything that resembles what you mention (see the image). As you see, there is a dropdown for the usual First baseline options and one for Line above (Lijn boven). In the latter you can only choose between "only a line above the first footnote" (my choice) or "above all footnotes (vervolgvoetnoten)".
Is this different from the English dialog box?

Multiple Rows for Same Value in Matrix Report

Hello
I am trying to create a matrix report that shows different page for each Category. Report looks like follows:
Page1( for Category '1')
Agent |
Calls |
Sales
TestAgent1 18
3
TestAgent1 5
1
Page2( for Category '2')
Agent |
Calls |
Sales
TestAgent1 26
5
TestAgent1 13
2
The issue is as you can see in above table, that i am getting repeated rows for same agents. I have tried making a parent group on Agent but it would still keep showing multiple rows. Ideally, it should show each agent only once in each page.
Any help would be appreciated.
PS: I am new to SSRS and this is my first time on microsoft blog, so i apologize if i wasn't able to follow the protocols/culture here.
Thanks

Hi M Adnan,
According to your description, you want to show a total Calls and total Sales for same agent so that it has only one row for each agent in your category group. Right?
In this scenario, if you only have a row group for category, it will show all “detail rows” in this groups even the agent of these rows are same one. So we can add a row group, set those detail rows group by agent and use Sum function to get the total Calls
and Sales. It looks like below:
If we want to display each Page in horizontal, we just need one Category column group for grouping rows and use sum function to get total Calls and Sales for each agent. It looks like below:
Reference:
Understanding Groups (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Calculate percentage between two rows in a matrix report with a single row group in SSRS 2008

I need your help. I have a matrix report in ssrs 2008. The report contain one field value column and one value column. I need to calculate a percentage for two values. For example : row 1 : Discount 10 Row 2 : Sales 100 Result : 10/100. I have only one
row group, I need to have a condition where Field = Discount % on Revenue then Discount/Total Turnover. Because of the grouping for total, I am not being able to calculate the %, its just totalling the % discount. Kindly refer to the snapshot of the
report.

Hi Thanks a lot for your answer, but unfortunately it didn't work,the report is reading from a stored procedure which I have unpivot to convert all columns into rows, so that's why Discount % on Revenue, Discount and Total Turnover is found in one column.
So the Field!Col.Value is the Discount % on Revenue, Discount and Total Turnover. I have tried to change the code to
"=SUM(IIF(Fields!Col.Value = "Discount",Fields!value.Value),0))
/IIF(SUM(IIF(Fields!Col.Value = "Turnover Total",Fields!value.Value),0)) = 0 ,
Nothing,SUM(IIF(Fields!Col.Value = "Turnover Total",Fields!value.Value),0)))" but to no avail. Any other suggestion will be most welcome.
Thanks.
If everything you're getting from stored procedure then you need to calculate and bring the value from there itself.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Line Chart/Graph for a Matrix report in Oracle Reports 10g

Hello,
If you have a Matrix report, say Month Name as rows, Year as columns (for example 2007, 2008, 2009) and sum of Sales dollar value as cells...I want a Line Graph which shows Months on the bottom axis and Years represented by lines and the sales value as the trend or data points on the horizontal line...it seems Oracle Reports cannot do this sincethe Chart wizard does not show either the Months or years as selectable fields for either X or Y axis.
I can easily write a sql which does the pivot and produce the results for Sales by month for last 3 yrs but in this case I would have to provide column alias similar to say CURRENT_YEAR, PRIOR_YEAR, PRIOR_PRIOR_YEAR. Then, the Chart wizard works correctly but the Legend shows the column alias which is not very desirable for an executive level report.
I was hoping that since a matrix report shows the correct column names, the legends will pull through correctly but I am stuck since the Chart for a matrix report doesn't work as I described above.
Does anyone know how to do this type of Chart on a Matrix?
Thanks,
Manish
Edited by: mhathi on Jul 15, 2009 1:59 PM

The way I'd do it is with a 3D-graph, I think you need that otherwise you will not be able to represent it properly ...
You will need to create another query just for the graph, which will create another group, containing only 3 columns (YEAR, MONTH, SALES), then start your Graph Wizard, then you will see two groups, select the one containing the 3 columns and when asked for the X-axis categories select both YEAR and MONTH, then for Y-axis select SALES.
That way it should work...

Page level total in a mulipage matrix report

hi!
I am facing a problem in marix reports because a very late change in customer requirement.he wants a page total at the end of every page in the report ,because these reports are matrix style,they involve cross product.i can get the grand total at the end of the report because the summary column works well at report level,but when i try to reset it at page level,at times it shows blank or generates an error that matrix report fetches everthing at report level and cannot generate results at page level.but now how do i get these page totals without changing these matrix reports.Plz reply ASAP
Regards
simer
The Oracle Reports Team
http://otn.oracle.com/

Hi I was browsing through the forum, and found no reply to your question, if you still interested about the solution I can send you my RDF file where I did the page level total in matrix report as well as brought
forward in next page, this is something very hard for me to explain in word, so if you can give me your email address I can send you the RDF file.
Thanks & Regards
Eamon

Oracle matrix report split in two pages

Similar Messages

Maybe you are looking for