Report to show shift wise activities for particular product

Hi, Is there any report exists to show shift wise activities carried on particular product, basically time taken,man/machine utilization,in-process rejection,machine break down etc.? how to generate the same.

Dear Yadav,
This report is something called as workcenter's performance report or as plant performance report.
In standard SAP again CO28 or COOIS or MCP7 or MCPH can be used.
But still in your case only a customized report can fulfill your requirement.
check and revert back.
Regards
Mangalraj.S

Similar Messages

Report to show all purchase orders for which invoice tolerence is greater than 3%?

Hi Experts,
Recently our company cofigured 3% tolerence limit for invoice.Now, I have got a requirement to create a report to show all the PO's for which the
invoice tolerence limt is eq 3 %.Kindly anyone advise ,is there any table that stores the inovoice tolerence limit based on PO? How to achieve this requirement.
Thanks in advance
Thanks & Regards,
Anusha.B

Hi,
I was wondering don't you have in your company MM consultant who suppose to give you the required tables name .
Regards.

Oracle tax reports to show exempt non exempt for states

Hello
is there any standard oracle report to show taxability of states in USA and Canada (exempt/non exempt status)
If so please give the report name and please advise on the name of the responsibility to use to run the report.
thanks
kp

Hello
is there any standard oracle report to show taxability of states in USA and Canada (exempt/non exempt status)
If so please give the report name and please advise on the name of the responsibility to use to run the report.
thanks
kp

Crystal Report not showing up during deployment for CRVS2010

Hi,
Have encountered problem when deploying Crystal Report using VB 2010. The report is able to show up during ASP.net development using VS 2010 but when i try to deploy on a IIS server, the report is just showing a blank page when trying to view using an Explorer on the client side. I'm using Window XP IIS 5.1 web server.
Have tried doing VB setup and installing the merge module CRruntime_13_0_1 but still not working.
Any help will be appreciated.
Thanks
KB

While the supported platform text says that Microsoft IIS5.1 is supported, I'm a bit dubious as CR 2008 (v. 12.x) did not support IIS5.1. See [KB 1494954 - Crystal Reports 2008 DHTML viewer for VS .NET is blank when displayed on a web form|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433393334333933353334%7D.do].
I'll check with Program Management and get back with a definitive answer.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Want report to display Sales Life Cycle for Particular Sales Area

Hi all,
What are the select-options,parameters and tables for the report sales life cycle for a particular sales area and if possible send me the code for the same.
Thanks in advance
Santosh R

Hi Sandy,
You would probably be better to post this in Crystal Reports Design forum category.
You could add a unjion into the data source so that it always returns a dummy row for each category.
Regards
Alan

A report to show the discount given for each order

Is there a standard report that will list the discount given for an order and also how much (in terms of percentage) as compared with the total sales value?
Thanks

Hi,
I believe that this discount is a condition in your pricing procedure, and not a dicount given in FI, right?
If is a condition in your pricing procedure, you can create a LIS structure to save this discount in a cumulative way.
Or, you can construct your own report through a query (SQ01) or a Z report based on the Logical Database (SLDB transaction), logical database AAV is the more indicated.
I hope that this helps you.
Regards.

FSG: Reporting Attributes Showing in one column for multiple segments

I am doing an FSG and and trying to run it through Program - Publish FSG Report and using the template provided but having a problem with the first coulmn of the report. The first column of the report is bunching up all the segments in one column instead of seperating it in multiple columns. For eg. 5100 Travel expense instead of in two different coumns is put together in one column. I have tried lot of things but none of them fixed it.
I would be glad to know anything that can solve or lead to a solution to this problem
Arun

Yes, I did. I had chose four segment descriptions there and I had something like 30-35 as the space for them. I have also checked the starting value of the column set. It looks ok. The XML BI Publisher is unable to seggregate them it seems for some reason.
Arun

Direct Reports not showing in Lync Clients for certain users in a pool

Hello guys, I am having issue with some users not being able to see direct reports of their managers in lync clients. Direct reports correctly shown in AD and outlook, but not in Lync. I have two paired lync pools. This issue is happening to users situated
within a pool. If I moved the manager to second pool, then users will see his direct reports. Does anyone knows how to fix this issue? Attached is sample.

Hi dareadepoju,
This information is from AD, you can try synchronizing the information manually.
Delete the .slabs file from the file share sitting on 000000000\000000000 folder and then run Update-CSUserDatabase and after 5 minutes, run Update-CsAddressBook.
The folder path:
X:\share\1-WebServices-1\ABfiles\000000000\000000000\
Best regards,
Eric

Report on raw material to wip for a production order

Hi,
Is there a report which has a list of " issue of raw materials to a production order"?
Or how to know how much raw material is issued to WIP on a production order.
i nee dto have a report which has material cost and material overhead an dtotal.
how to build this report ?
Thanks,
Sai.

Hi Sai,
You can try using MB51, use filter movement type 261. Add a filter for the posting date coverage.
Then proceed. Click on the icon DETAIL LIST.
Then click on the SUBTOTAL, add MATERIAL as a Criteria. The click the column AMOUNT IN LC.
You should see the total issuances to per material.
I hope this helps.
Heinrick Palad

Maintenance activities for a productive machine

Hi,
Although a BASIS support issue, does anybody have information regarding basic maintnance operations thas need to be performed when a machine is running in a productive situation? We have a hard drive that is rapidly filling up with information and it has become necessary to increase the disk space to fix it. I'm not so certain that the BASIS team responsible for this maintenance is monotoring and reacting completely correctly, and I would like to know myself what may be causing the problem.
Kind Regards,
Tony.

Hi Anthony,
Cause of problem is Log Files, they come on daily/hourly/weekly basis and we dont archive them.
So Please do these:
1. Periodically archiving log files on a different drive from Server drives.
2. Checking of background jobs, like delay settings, any error occured, exception.
3. Set an email option if available while any thing goes wrong.
4. Periodically checking about server heartbeat/performance.
5. Deleting temporary files from drives.
6. Deactivate unnessary objects.
7. Check the data files for dummy/corrupt data.
8. Avoid unnessay login to production server etc.
Hope this will help. Rewards if helpful.
BR,
Alok

Fetching Alert for Particular Product and Location

Hello,
This is on ABAP side..
I just wanted to know whether its possible to fetch alerts for Pariticular material and Location.
I checked the method Read_alerts in Class /sapapo/alert_manager, but its not working. Any suggestion on this are welcome.
Please do suggest..
Thanks in Advance,
Srini

Did you try using BAPIs BAPI_SYSTEM_ALERT_GETDETAILS ?

Shift wise confirmation and shift wise production report

Hi Guys
To get shift wise production confirmation and reports, I have maintained the following setting ,
1- maintained shift sequence and with shift grouping,
2- assigned the shift grouping to work centers,
other theses settings, what other setting to be done for shift wise confirmations and also production reports,
thanks in advance,
mohan.m

Hi Mohan,
We had similar requirement for our manufacturing plant.
We have done Z-Development for
1) Shiftwise - Linewise Production
2) Shiftwise - Beltwise Packing
1) for that we have define new control key
2) That key assigned to master recipe.
(Why new control key ?
New control key is defined specifically to generate this report. Because Auto GR is done only at the end of packing and not at the end of shift. But we want report for each shift. That's why after each shift end proposonatly that much qty is confirmed by new control key. However actual Goods receipt is only happened while completing total manufacutring or packing)
3) That control kept as base of Z-development.
4) As far as shift timings are concerned, we have taken actual shift timings of our manufacturing plant.
Hope this will help to resolve your problem.

SAP workload monitor is not showing for particular date in Total Option

Hi,
In t. code ST03N (Work Load Monitor) data is not showing in option total for particular date but it is showing in all the instances.
Please support
Regards
Ganesh Tiwari

Hi Mamtha
Does the same navigation work directly in the backedn? In RSRT?
Pls try that, will halp narrow down your problem. WHether it is a data issue, whetehr it is a BW issue or whether it is a display issue.
Regards
Rajesh

Reports available in the Business Package for MSS and ESS

Hi,
I have searched sdn.sap.com throughout looking for a comprehensive list of reports available in the business packages for both MSS and ESS, i got a little bit of joy and found some of the MSS reports but not all on sdn.sap.com, can anyone please advise where i would find such information on both these packages, just to re-iterate, i am looking for a list of reports these business packages offer? any help much appreciated.
Thanks
John
P.s any documents can be sent to [email protected]

@John
(1) ESS- We built our own custom PORTAL role/workset in which one of the worksets we created is called "Tools and Forms". Under that workset, we placed various pages/iViews that either are simple URL iViews that link to external documents and such (like vacation request forms since they do not do online leave requests yet) as well as a couple ot t-code iViews that run reports in ECC for the employee. Nothing very mind blowing there. Just some content creation on the portal side.....oh, and some config on the backend to create a Homepage Framework Area Page and all for it (I liked that part!)
(2) Wow....talk about perfect timing...I just had to document the way MSS sees the MDT reports in it's "reporting" area yesterday! haha Here goes the quick explaination....in configuration for MDT, you have various "scenarios". These kinda determine which "groups" of reports will show in MDT. For MSS for the Reporting webdynpro/service, the scenario is RPT0 (in ECC 5.0, at least). Soooo if you look at the function CODES assigned to RPT0, you will see several for Training and one for Accounting (Cost Centers)...you can reference the function CODES listed back to the "pool"/library of function codes a bit up/previous in the same config area for MDT(I think it is called "Define Function Codes"). However, there is one more piece you will see listed under RPT0....it is a DIRECT call to function MODULE "HR_HIS_READ" (this was a bugger to find because I could not find the "Maternity" report listed in the function codes and had to figure out where the heck it was coming from! haha). Anyways....what the function MODULE actually does is call the HR Information System (HIS) passing it the RPT0/MSS scenario. This returns the particular reports for Employee Data and Time&Attendance. You can see this if you run the HR_HIS_READ function directly and enter RPT0 for the second input value (first and third are not needed or you can just enter "*". Sooooo that is how the "magic" happens. Hope that explained it. From there, you can simply config you own scenario/reports to add into MSS if you like.
Hope this helped!

Report not showing terminated empoyees payroll results

Hi there,
I have coded a report that shows customized payroll data for a group of employees, delimited by two dates. The user found a problem when an employee is terminated on a given month but his termination is processed the next month (vacations, etc). Say the employee quits October 27, the payroll is run on November 10 and the report is run for November 1 - November 30: I wont see his payroll results because the employee does not belong to a particular organizational unit in november.
This is my main code:
START-OF-SELECTION.
GET pernr.
sapid = pernr-pernr.
* CREATE AND POPULATE PAYROLL OBJECT                         RRV100807
CREATE OBJECT pay.
CALL METHOD pay->read_result IMPORTING list = mylist.
* ELIMINATE OLD RECORDS                                      RRV100807
LOOP AT mylist INTO wa_mylist WHERE SRTZA <> 'A'.
    DELETE TABLE mylist FROM wa_mylist.
ENDLOOP.
* PROCESS PAYROLL FOR THE DESIRED ENTRIES                    RRV100807
CALL METHOD pay->write_result EXPORTING list = mylist.
GET payroll.
LOOP AT payroll-inter-wpbp INTO wa_wpbp WHERE orgeh IN PNPOBJID.
*   PROCESS PERIOD DATA
    itab_rt = payroll-inter-rt.
    PERFORM get_wt_amounts.
    EXIT.
ENDLOOP.
GET pernr LATE.
* IF THERE ARE PAYROLL RESULTS
IF wa_result-otsal <> 0
     OR wa_result-regsal <> 0
     OR wa_result-teller <> 0
     OR wa_result-other <> 0.
*   PROCESS EMPLOYEE
    PERFORM get_data.
ENDIF.
Basically, the GET PERNR (get personnel record) is never executed because the employee does not belong to the org unit. Is there any way to gather employee records in one interval and payroll results in another? I assume they both use PNBEGDA and PNENDDA at this point.
What I want is to retrieve payroll information based on the screen dates (BEGDA and ENDDA) and the employee data based on the payroll periods that were run during those dates.

Instead of using the standard selection screen field for choosing org units, you could create a custom selection screen field for the org unit. So the org unit would not affect the initial GET PERNR selection. Then in your code (after the GET PERNR) you could check for the org unit, with an additional condition to check the employee's previous org unit if he is terminated. There is also more than one way to get payroll results. We often use this in our reports:
FORM get_payroll_results.
CLEAR results_present.
    CALL FUNCTION 'CU_READ_RGDIR'
      EXPORTING
        persnr          = pernr-pernr
      TABLES
        in_rgdir        = rgdir
      EXCEPTIONS
        no_record_found = 1
        OTHERS          = 2.
    IF sy-subrc EQ 0.
Get cumulative monthly results
    Store only active payroll results.
      DELETE rgdir WHERE srtza NE 'A'.                "Active
    Delete all the payroll results not from the requested year
      DELETE rgdir WHERE paydt0(4) NE p_mdate0(4). "Reporting Year
    Delete any payroll results after the requested balance date
      DELETE rgdir WHERE paydt > p_mdate.
    Delete voided payroll data.
      DELETE rgdir WHERE voidr NE space.              "Voided
    Sort so the first record is the last for the requested year.
      SORT rgdir BY paydt DESCENDING fpend DESCENDING.
      LOOP AT rgdir INTO ws_rgdir
        WHERE paydt > beg_date.
        seqnr = ws_rgdir-seqnr.
        CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
          EXPORTING
            clusterid                    = 'RU'
            employeenumber               = pernr-pernr
            sequencenumber               = seqnr
          CHANGING
            payroll_result               = result
          EXCEPTIONS
            illegal_isocode_or_clusterid = 1
            error_generating_import      = 2
            import_mismatch_error        = 3
            subpool_dir_full             = 4
            no_read_authority            = 5
            no_record_found              = 6
            versions_do_not_match        = 7
            error_reading_archive        = 8
            error_reading_relid          = 9
            OTHERS                       = 10.
        LOOP AT result-inter-rt INTO wa_rt
          WHERE lgart = wa_wagetype.
              ADD ws_betrg TO ws_total.
         ENDLOOP.
      ENDLOOP.
    ENDIF.
This allows you to specify by date, wagetype, pay period, etc. which payroll results you wnat to include. I hope this helps.
- April King

Report to show shift wise activities for particular product

Similar Messages

Maybe you are looking for