Oracle VM 3 - How to keep accurate time on the server?

I'm just starting to play with Oracle VM 3.0.1. It sure is MUCH better than 2.2.
The installation went smoothly. Then I installed the VM Manager, and that worked just fine, too. I discovered my server, and created and server pool, and put the server in the pool, and all that.
Somewhere along this path I was expecting to be asked about my NTP servers, so the VM server would time sync to an accurate source, but I was never asked.
Am I supposed login to the VM server and do this myself?
I can do that, but Oracle says "just install it and walk away, and do everything else from the VM Manager". And if I do login to the VM server console, I am warned that if I change anything manually, bad things will happen to me.

user10165929 wrote:
Somewhere along this path I was expecting to be asked about my NTP servers, so the VM server would time sync to an accurate source, but I was never asked.
Am I supposed login to the VM server and do this myself?When you discover an Oracle VM Server, it configures the Oracle VM Manager machine as an NTP source. So, configure NTP on your Oracle VM Manager to provide NTP services to your servers.

Similar Messages

How to keep your email on the server after deleting from the phone?

how to keep your email on the server after deleting from the phone?

If this is a POP mail account:
Settings > Mail.... > Your account > Advanced > Delete from server > Never.
However, this will risk re-downloading as new mail
IMAC accounts mirror what's on the phone in the server, so deleting from the inbox on the phone will either send it to the trans folder on the server or leave it in the inbox but marked as deleted (depending on the server)
Settings > Mail.... > your account > Advanced > Deleted Mailbox > On My iPhone Trash

Creative Zen 8GB not keeping accurate time on cl

Hello, I am wondering if anyone else is experiencing problems with thier Creative Zen's (mine is an 8GB) not keeping accurate time on the digital clock on the player? My firmware is .2.0 by the way. I have a fully charged battery and noticed yesterday that the time on my clock was way off and needed to be set once more. So I set it correctly yesterday, now 24 hours later, the time is again way off...it thinks it's :6 pm even though it's 0:20 pm as I post this message.
I have noticed this several times previously and have adjusted the clock accordingly each time...this is not just a random incident.
I have used the player for several hours today but the battery still has lots of charge left and the unit functions correctly minus this time issue.
Any feedback or help would be appreciated.
Thanks,
Drew

I too hope that if others are having this problem that they would add their comments to this thread. I know this is a rather small issue, but it is annoying none the less. I mean otherwise my player is rock solid. Yes I could turn off the display of the clock and not rely on it at all (now I don't because it's always wrong) but that means I am settling for a product that does not work as advertised with ALL it's features working correctly. I am being kind of picky but I just want the product to function correctly... I don't think that's being too out of the ordinary with my expectations.
Anyhow, to make a long story short, I have been issued an RMA number and plan on sending the player off to Creative here in Canada.
I promised to post a follow-up with a copy of what Creative has sent me for correspondence in case others are interested. Oh and just to be complete, here are my answers to the suggested self-troubleshooting methods in the following email - yes I am running the latest firmware release and I am a clock setting professional now because I have done it so many times.
I have also searched this forum for other users who may be having this issue and I did not find too many (I found this interesting). So that is why I created this thread. I am starting to notice, at least at this time, a few others who are having similar experiences as I-yup I agree I am not the first to have problems with my MP3 player nor the last. Just was curious to see if this was a common problem or if I was the lucky one of the bunch or one that people just didn't bother to report...
Regardless everyone's feedback is appreciated and respected.
Anyhow here is their email:
Dear Drew,
Thank you for your contacting us at Creative Technical Support; we
appreciate the opportunity to assist you.
I understand that you are having some issues with your Zen player. The
device does not display the time correctly causing you to reset the time
frequently. I'm sorry for the inconvenience caused; allow me to offer
some possible solutions to this issue.
Prior to sending us an email, I believe you would have gone through some
basic troubleshooting steps for your player. If not, please refer to the
Knowledge Base article below:
How to Use and Troubleshoot Your Zen Player
http://us.creative.com/support/kb/ar...p?l=2&sid=4763
To begin, I would suggest you refer to the following Knowledge Base
article regarding setting the Time and Date on your Zen Player,
specifically the first part that deals with Zen players in general.
Changing Date, Time, Clock and Alarm On A ZEN Player
http://us.creative.com/support/kb/ar...p?l=2&sid=5638
Subsequently, you might wish to update your player's firmware to the
latest version. You may use the Recovery Tool to do so. Please follow
the link below:
http://www.creative.com/products/mp3...me.asp?region=
However, if the time on the player still does not display correctly, you
may need to schedule for a repair or replacement. Please note that your
product will be tested upon receipt and if no malfunction is found in
the product, it will be returned to you.
Please follow this link to have an RMA issued for your product:
http://us.creative.com/onlinerma
All applicable fees will be assessed at the time that your RMA is
processed in an effort to expedite the repair or replacement of your
product.
Thank you once again for contacting us. I hope the above articles are
able to address your concerns. In the mean time, perhaps you might be
interested in the Creative Aurvana In-Ear Earphones for your Zen player.
These earphones have been designed to block out 90% of ambient sound,
thus providing more precise audio reproduction. It would be a great
complement for your player. For more information about this product, do
have a look at our website
http://us.creative.com/products/prod...&WT.mc_id=3862
If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service.
Best Regards,

How to Keep Custom Brushes in the Brush Panel Flyout Menu?

So I have a set of brushes that I mostly commonly use. However, I still use other brushes on occasion. When I load those brushes, my custom brush set doesn't stay in the flyout menu and I have no choice but to find the brush file and reload it. Every time.
It's getting to be a pain in the butt, so I'm wondering if there is a way to permanently keep your custom brush set in the flyout menu of the brush panel I've attached a screen shot in case what I wanted wasn't quite clear! I want my custom brushes to go where the green area is point.
Also I'm running a Japanese version of PS, but I'm pretty sure almost all the menu places remain the same. I translated some of the menu (although it might not be the exact same as the US CS6, but if you give me instructions, I'm pretty sure I can figure it out!)

Thanks! You're a life saver
iPhoneから送信
2014/10/31 16:16、R_Kelly <[email protected]> のメッセージ:
How to Keep Custom Brushes in the Brush Panel Flyout Menu?
created by R_Kelly in Photoshop General Discussion - View the full discussion
Looks like you using mac os x?
There are two places you can put your brush presets file:
1. /Macintosh HD /Applications/Adobe Photoshop CS6/Presets/Brushes
2. /Users/User Name/Library/Application Support/Adobe/Adobe Photoshop CS6/Presets/Brushes
The difference is that the ones in the cs6 application folder show in your red area and the ones in the library show up below the red area with a separator line
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6886054#6886054
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Wher

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Where are all the options I had in PS10? Also...Can I burn this to a DVD?

The changes have brought improvements but also drawbacks compared with the old slideshow editor.
The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

How to keep data integrity with the two business service in OSB 10.3.1.0

How to keep data integrity with the two business service in OSB 10.3.1.0
In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

Can you please explain what you meant my data integrity in your use case?
Manoj

How to get Date and time of the server?

Hi, How can we get the date and time of the server while submitting a form using JSP? i.e I need the date and time , when the user is submittig a registration.
Uma

Upon receiving your data in your servlet, you can do the following to get the date,
Calendar calendar = Calendar.getInstance();
int dd = calendar.get(Calendar.DAY_OF_MONTH);
int mm = calendar.get(Calendar.MONTH) + 1;
int yyyy = calendar.get(Calendar.YEAR);
String dd_mm_yyyy = dd + "/" + mm + "/" + yyyy;
To get the time, simply take a look at the Calendar API to get the corresponding field.

How to CAC (Smart Card) enable the server within JDev

I need to know how to CAC (Smart Card) enable the server within JDev, or if it is even possible.

Kamran,
you are definitely thinking in the right direction.
1) Would I need to export or enter all the existing users of the system presently available through an internal database to the SSO Repository or there is a different way of getting the users to the OID when they first run the url or our Oracle Forms App?
You have a choice: pre-load (probably using LDIF) or create what I call a self-registration process. Pre-load will require the arduous task of gathering the CAC user CN's in advance. This is technically easy but logistically a nightmare.
I created a self-registration JSP which is invoked by a failure to lookup a user in OID. Registration involves requiring a user to enter valid database credentials, testing the credentials (by making a connection) and binding the database userid/password to the CAC identity.
2) How would I get the CAC Certificate CN from the Browser or CAC Card so I can make the comparison to the OID CN?
When you configure the SSO for certificate authentication, the HTTP_Server will pass the SSL variables (which include the CAC certificate which was authenticated in the SSL handshake) to the sso/web application deployed in the OC4J_SECURITY container. You can install your own plug-in that the SSO will invoke where you can retrieve the authenticated certificate and get any of the information therein from Java.
I recommend you get very acquainted with the SSO Admin Guide (esp. Cert authentication chapter), as well as, the Forms Deployment Guide (esp. SSO chapter).
There is too much to fit here. Things would be a lot easier if Forms Server supported enterprise users for authentication to database. Forms apps are relegated to the whole business of RADs and such which gives you X.509 certificate (and thus CAC) authentication but is rather convoluted IMHO (password in the clear in the RAD, orclResourceViewer permission for Forms Server, userid/password login in the background) but that is a different discussion.
Good Luck.
regards,
tt

HT201407 i restore my iphone and now it doesnt want to activate. it keeps on telling me the server cant be reach

i restore my iphone and now it doesnt want to activate. it keeps on telling me the server cant be reach

With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.
All anyone can really recommend is to keep trying or wait until a bit later, after the hubub has died down.
Also might try this: http://support.apple.com/kb/ts3424

HT1414 Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

Keep getting connections to the server failed any ideals anyone

Keep getting connections to the server failed when checking for my email using hotmail ideals anyone thanks

You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to check Debug messages in the server

Hi All,
I am working on extensions and in my java controller file i have certain System.out.println messages. I would like to know how to check these messages from the server for debugging purpose.
Kindly help me in the same.
Thanks
Deeksha

11i - log file location - $APACHE_TOP/Jserv/logs/jserv.log
r12 - log file location - $INST_TOP/logs/ora/10.1.3/opmn/oacore_default_group_1/oacorestd.out
You can prepend your SOP with some text and search for the text in the log files.

How to download ALL MAIL from the server in a Mail app ?

How to download ALL MAIL from the server in a Mail app ? I want all the mail messages, sent, received ON my computer... Thanks much !!!!!!!

In Mail's Accounts/Mailbox Behavior preference pane make sure these 4 checkboxes are NOT checked:
OT

How and what to configure in the server configuration files of Tomcat Web ?

Hi,
I am using TCP/IP socket connection pooling in my project. For pooling I have written code, I want once the tomcat webserver starts there should be at least 10 instances of connections to be created in the pool. Could any one please tell me how do I do this in the server configuration files (server.xml or web.xml).
Thanks in Adv.
JitDev2009

Take note: the mbaworld.com site has its Tomcat setup/environment poorly configured that the documentation which came along with Tomcat setup became indexed by Google. It has further completely nothing to do with Tomcat itself. Please refer Tomcat's own homepage at [http://tomcat.apache.org] for the documentation.

How do i fix connection to the server failed with yahoo

how do I fox connection to the server failed on my 1phone with yahoo

Hi,
You can try to right-click and '''Reset''' the key '''browser.newtab.url''' in [http://kb.mozillazine.org/About:config about:config] or '''Modify''' and enter '''about:blank'''.
[http://kb.mozillazine.org/About:config_entries about:config Entries]
The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.
[https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites New tab page]
If the issue returns, you can try to check/change the '''Options''' for ShopAtHome in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions''', or in the toolbat itself.
[https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using extensions]

Oracle VM 3 - How to keep accurate time on the server?

Similar Messages

Maybe you are looking for