Oracle9 lite and configuration mode

I am have the oracle9i database standard edition
and i want to use oracle9 lite edition in my project.
I already had installed all software.
And now i stand on choice between three configurations of system.
modes:
first - mobile server in standalone mode.
This variant to give the best fit.
But why the official documentation calls the standalone mode as test mode for developers?
second - mobile server as module for apache.
i don't know about this configuration, i only recently heard about her.
third - mobile server as module for oracleAS.
I am necessary to have additional licenses for oracleAS.
What somebody will tell me for my new project and which the configurations you uses for the projects ?

Nothing wrong with running standalone, except that you would have to telnet or RDC into the machine to restart the service. That's the only real limitation I can think of.
Plus, I think you can run the application in multiple JVMs or Clusters if you have application server. This would only be beneficial if your application was memory intensive. Most applications are bound by the number of CPU's so multiple JVMs don't help all that much.

Similar Messages

Differences between Oracle9i Lite and Oracle8i Personal

Hi,
I've read that Oracle8i Personal is a full-featured version of
Oracle8i. But I would like to know if the Oracle9i Lite version
is also a full-featured version of Oracle9i? Maybe someone can
help me to explain the difference between the Personal and Lite
version. Or maybe give me an URL where I can find all the
information I need.
Thanks in advance, Ann

Check out the readme document for Oracle9i Lite. It goes over your questions regarding new and desupported features.
Here is some information from the readme:
Deprecated Features and Components
iConnect - an umbrella term for Oracle8i Lite's synchronization and messaging component
C-REPAPI - replaced by the more powerful Mobile Server/Consolidator. C-REPAPI and related components such as Java Replication Classes, Replication Cartridge, OCX Wrapper has been removed from the CD
Oracle Mobile Agent - used for wireless replication under the C-REPAPI replication technology. Obsolete because C-REPAPI is no longer part of Oracle9i Lite
Web-to-Go Server - integrated in Mobile Server
Consolidator Server - integrated in Mobile Server
Synchronization Server for Handheld Devices - integrated in Mobile Server
Scout MTS - no longer supported
Oracle8 Navigator - no longer available. Navigator functionality has been implemented in either Control Center or Packaging Wizard
Oracle Lite Designer- removed
Internet SQL - removed
Oracle Lite Deployment Wizard - obsolete because of Mobile Client
OLITERM - removed because no longer needed
null

How can an Oracle9i Lite DB receive connections via JDBC?

I have not really experienced with accessing Oracle from Java, so here is a short description of the problem:
I haven't yet figured out how is a database listening for connections. I think that the use of Listeners is for this job but I have not yet been able to configure them right for enabling access from a Java program. All these terms like SID and Net Configuration Manager are quite confusing and don't know how to use each.
My database is Oracle9i Lite and called "harris_db". I am using JDeveloper9i and the Thin driver is used for accessing the database. The database is local and I am not sure whether I am supposed to use only TCP, IPC or both protocols. Do I need a Name Server? Also, what should be the database URL? I know that is should have the following format "Oracle:thin@..." but don't know exactly.
Sorry for all those questions, but I am trying to find a way, I am really confused...!
Thank you in advance for your assistance.

The 9i 'Lite' database is not a multi-user db and doesn't have a listener. You should be able to use the JDBC/ODBC bridge to get to it, I haven't looked at the lite version in a while there should also be a type-2 driver for it which would eliminate the bridge. I doubt very much that there is a type-4 driver for it, but you can check. The 'big' Oracle type-4 (thin) and type-2 (OCI) drivers are not intended for use with Oracle Lite.

Security in Oracle9i lite

Hi
We're developing an app wich needs a lightweight database using VB6. So we started working with Oracle9i lite, and right at this point we're worriying about security :
- We have to use an ODBC driver, and it's seems easy to see DB user/password using a tracer (not only with the ODBC manager trace utility).
- We have encrypted the database (with ENCRYDB) but it doesn't ask for the encryption password anywhere after that ...?? and if the password is passed in the ODBC connection string ... it won't be very useful, well al least the .ODB file is encrypted.
Our app will run on all-stand-alone PCs.We think the main keypoints when we try to keep data safe from attacks are :
- Data encryption on the database to prevent direct file (.ODB) data browsing and copying.
- Database access only available from application, and security (user access) is controlled by the app, so only one user/password to access the database must be kept by the app (in a secure way).
- Traffic between application and database (or at least confidential data) must not be available to tracers, etc.
We would recieve very gladly any suggestions about this problems to help us take any decission.
Un saludo.

Howdy. This information may come in a little late, but try using the CREATEDB utility that comes with 9i Lite. Just type createdb on your command prompt for syntax.

INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name   ...........-HP
System Manufacturer    Hewlett-Packard
System Model    HP ProBook 4530s
System Type    x64-based PC
Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version    2.6
Windows Directory    C:\windows
System Directory    C:\windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    ...........-HP\................
Time Zone    South Africa Standard Time
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.94 GB
Available Physical Memory    1.00 GB
Total Virtual Memory    7.87 GB
Available Virtual Memory    1.25 GB
Page File Space    3.94 GB
Page File    C:\pagefile.sys

To clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK

Can I configure csm as one arm and routing mode at the same time?

My csm currently is configured as the routing mode and bridge mode, resently I have a service requirement which I think the one arm mode should be the best resolution. Can anybody let me know if there will be any affect if I add the one arm mode to the currently production environment?
Thanks in advance.
Jason

Gille,
Thanks for your quick response. I notice you have same opinion about the one arm mode in your other post, but I think in the multi-tire data center design with fw in bridge mode and csm in one arm mode with RHI, do give us a lot of flexibilty. If I use policy routing instead of source nat, can I overcome these limit you metioned?
Do you know who csm could handle the TFTP traffic? I may have too much question, I am realy looking for your suggestion.
Thanks
Jason

Active/Standby And failover link configuration mode

Hi everyone,
When config failover link of ASA in Active Standby mode.
When we config failover int say gi0/1
config t
int gi0/1
failover lan int gi0/1
Need to confirm we do this from interface config mode only or we can do this from global config also ????????
Whe we assign IP to this int we do that from global config mode ????
Regards
Mahesh
Message was edited by: mahesh parmar
Message was edited by: mahesh parmar

Hi,
Actually the ASA lets you insert a lot of command what ever mode you are under.
In the output you posted is a very important thing to notice
configure mode commands/options:
WORD Specify the interface name
As you can see, the output lists only one option and before that it mentions that this is a "configure mode" command
So even if you entered the command under the interface configuration mode, it would still be entered as a global/configure command mode.
Take the following thing for example
I want to check what configuration options I have with the command "failover"
So I enter the following to my ASA
ASA(config)# failover ?
configure mode commands/options:
interface              Configure the IP address to be used for failover and/or
                              stateful update information
interface-policy    Set the policy for failover due to interface failures
key                       Configure the failover shared secret or key
lan                       Specify the unit as primary or secondary or configure the
                               interface and vlan to be used for failover communication
mac                      Specify the virtual mac address for a dynamic interface
polltime                Configure failover poll interval
timeout                 Specify the failover reconnect timeout value for
                               asymmetrically routed sessions
exec mode commands/options:
active          Make this system to be the active unit of the failover pair
exec            Execute command on the designated unit
reload-standby Force standby unit to reboot
reset           Force a unit or failover group to an unfailed state
As you can see, the ASA tells us that there are different additional command parameters after the "failover" command that can be used. Some of them can be used either in Exec or Configuration mode.
- Jouni

Display mode; workbench user and configuration user are not identical

Hi Friends,
I am doing changes in WEB UI view. When I am clicking on EDIT button to change the configuration. I am getting the given below error.
Display mode; workbench user and configuration user are not identical
System is also not giving popup to select user.
Regards,
Narendra Goyal

Hi,
U just logoff and relogin into the session and check it out.

After iPad ios 5 upgrade, itunes "interrupted while restoring" restore gets error -50. iPad starts in 'configure' mode - can I configure as 'New iPad' and then restore?

After iPad ios 5 upgrade on Win7 64bit pc (x386 iTunes), iTunes gave me error "iTunes was interrupted while restoring, restore again now?" I try to restore but iTunes immediately gives error -50. Apple website says -50 is a timeout, but I have tried all fixes: changed usb ports, new cable, reset iPad, restart pc, remove sim... no good.
iPad starts in 'configure' mode, but won't restore from any of the several iTunes backups I have. Ready to giveup on 'restore'! iPad is sync'ed in iTunes, connects and syncs ok, so I don't want to lose that info.
Can someone from Apple advise - can I 'configure' as 'New iPad' and then restore or sync to recover my Apps and data etc? OR if I 'Restore' from iTunes 'Summary' tab, will I still be able to Sync to restore the iPad Apps and data?
I'm seeing a lot of frustrated Apple users online, hoping that a fix for this problem will help a few of us!! An iOS upgrade should not cause this much pain and wasted effort.

You might already have tried all of these, but just in case:
1. Make sure you have the latest version of iTunes.
2. If you're on a Windows PC, consider uninstalling iTunes and Quicktime, restarting the PC, then reinstalling. This sometimes fixes oddities.
3. Make sure you have no firewall or anti-virus running/active.
4. Try different USB cable; if you're using a cable via a hub, try connecting without the hub. On desktop PCs, the direct (non-internal-hub) USB sockets are usually at the back.
5. If yoiu haven't already done so, download the iOS5 update via the direct links I posted above
6. If using Update doesn't work, use Restore. Option-click (Mac) or Shift-Click (Windows) the Restore button in itunes.
7. Before you to the Restore, right-lick the entry for your device in iTunes and choose Backup from the drop-down menu. You may need this backup later.
If you're srtuck in recovery mode:
- There are some tips here for Windows users
http://thehowto.wikidot.com/ipad-stuck-recovery-mode
- If your device is stuck in Recovery mode, you can try putting it into DFU mode, from which iTunes should be able to Restore, as above. Details here:
http://www.tipb.com/2010/12/02/tip-put-iphone-ipad-dfu-mode/
- This link points to a utility that can help (Windows and Mac)
http://runningblind.com/post/2800674985/ipad-stuck-in-recovery-mode-for-no-reaso n
I hope something here helps

Is Oracle9i Lite the right choise of us?

We have Oracle db 7.3 runing on solaris. Can 9i lite work with my old db?
Thanks
tq

There is Oracle9i Lite versions downloads list:
Oracle9i Lite Release 5.0.2 for Windows CE, 95/98/NT/2000, Pocket PC, Palm Computing Platform, and EPOC
Oracle9i Lite Release 5.0.2.0.0 for Linux New! 22-Oct-02
Oracle9i Lite Release 5.0.2.0.0 for Sun SPARC Solaris
Oracle9i Lite Release 5.0.2.0.0 for HP-UX New! 22-Oct-02
Oracle9i Lite Release 5.0.2.0.0 for AIX
Oracle9i Lite Release 5.0.2.0.0 for HP Tru64 New! 14-Nov-02
But Lite, is not in Oracle 9i(Interprise,Standart,Personal) family. This product for mobile devices, or small offices up to 16 concurent connections in Branch Office mode. It is very simple in administration.

Reporting Services in both SharePoint 2013 connected and native mode?

Is it possible to configure Reporting Services (SQL Server 2014) to support both SharePoint 2013 connected mode and local Report Server in native mode on the same server using multiple instances of RS? The reason for this setup is to avoid having to purchase
SharePoint Enterprise CALs for other users than analysts and still be able to publish standard reports to all employees.
Management and analysts -> Custom reports published through SharePoint 2013 Enterprise (SP2013 ECALs and SQL Server 2014 core license). Data alerts and Power View enabled if possible.
All employees -> Standard reports published through Native Mode Report Server (SQL Server 2014 core license). Possible subscriptions.
I find the official documentation a bit lacking in this area but can't find anything stating against the above. It would be greatly appreciated if someone could confirm before planning the installs.
What I'm aiming for is somewhat similar to the "2 Tier Topology" described at: Example
License Topologies and Costs for SQL Server 2014 Self-Service Business Intelligence
With the difference that there is a separate SQL Server 2014 server used both by SharePoint and as a standalone BI-server.
SharePoint EE + SQL Server 2014 EE
Excel Services
SSRS Add-in (Reporting Services, Power View)
SQL Server DB for SP Content, Configuration and Service Application DB:s
SQL Server 2014 EE - SharePoint + Standalone for BI
SSRS SharePoint Mode
SSRS Native Mode
SSAS (Not in SharePoint mode, skipping PowerPivot for now. Would Power View still work?)
SQL Server DB for Data Warehouse
= 1 x SharePoint EE Server Licence, 2 x SQL Server 2014 EE Server Licenses?
Deployment
Topologies for SQL Server BI Features in SharePoint - Actually gives a good overview in the section "PowerPivot for SharePoint
2013 and Reporting Services Three Server Deployment". Just remove PowerPivot Service from Server 1 and change the Analysis Services in Server 2 to a regular native multidimensional mode. Server 2 would also be used for native Reporting Services.
Fallback or even beneficial option to install SSRS in SharePoint mode on the SQL Server instance used for content and configuration?

Hi Daniel Wikar,
As per my understanding, you want to install two SQL Server instances on the same server, and configure one of the Reporting Services to SharePoint integrated mode, another to native mode.
According to my knowledge, multiple instances of Reporting Services on the same computer, where one instance runs in SharePoint integrated mode and the other instance runs in native mode is supported. But we must run all report server instances at the same
level. For example, if we are using SQL Server 2014, all report server instances must be SQL Server 2014.
Besides, Analysis Services and Reporting Services can be installed as standalone servers, in scale-out configurations, or as shared service applications in a SharePoint farm. Installing the services in a farm enables BI features that are only available in
SharePoint, including PowerPivot for SharePoint and Power View.
For more information about Feature Comparison of SharePoint and Native Mode and Supported and Unsupported Configurations, please refer to the following documents:
http://msdn.microsoft.com/en-us/library/ms157231.aspx
http://technet.microsoft.com/en-US/library/bb510781(v=SQL.105).aspx
For detailed information regarding to the license issue, please call
1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

The difference between VTP server and transparent mode on Catalyst Switch.

Hello
I have a question about the difference between VTP server mode and VTP transparent mode on general catalyst switch.
Basically VTP server mode can create and modify VLAN configuration but actually there is not any VLAN configuration through running-config, is it true? When I checked it on Cat3550, certainly there is not VLAN configuration on VTP server mode. But VTP transparent can create VLAN and configuration but does not synchronize with other switch VLAN status. I appreciate any related information and reason of the VTP server mode specification, thank you very much.
[VTP Transparent mode]
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Transparent
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
name TEST-VLAN
[VTP Server mode]
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
Best Regards,
Masanobu Hiyoshi

Hi mhiyoshi,
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Transparent
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
name TEST-VLAN
The above out put indicates that Vlan is created and then mode changed to transparent. i.e why revision no is 0.
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
This indicates that vlan never created in server mode nor learnt from another switch as revision no is 0

Cisco Jabber for Windows in Extend and Connect mode and making outbound calls

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error

Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type       : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
        Version: 1201000100
        Revision: 0
        OS Platform: Generic Platform
        Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.

   Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

Adding and configuring a second hard drive in a Power Mac G4

I am using a Power Mac G4 with the original 20GB hard drive and running OS 9.2.2.
I would like to upgrade to 10.4 (Tiger) installing it on a 80 GB Seagate Ultra/ATA 100 which I need to install as a second hard drive.
This is where my problem arises. From what I have read I cannot install OS 10 on a drive configured as SLAVE. On top of this Apple article ID 106728 has a note not to “change your Apple –installed disc drive to ATA ID-1 (slave) when adding other ATA devices.”
Is this article correct or am I misunderstanding it? I was hoping I could just install the new drive on top of the original and switch the configurations of the drives making my original drive the SLAVE and the new drive MASTER and just install OS X on the new 80GB drive.
Or can I put the new drive in the position of my original drive configure it as MASTER and put my original 20GB drive above it and configure it as slave?
I am hoping someone can let me know if these configurations will work.
Another question is: If I switch the position of my original drive will I lose access to the data on it?
I would like to keep the OS systems on separate drives because I need to continue to run my old software and Heidelberg scanner (SCSI, running on LinoColor Elite 5.1 for which updated drivers are not available). This will not be possible in classic. I want OS X on the larger drive as I will be loading updated software eventually and it will become my main OS system.
Power Mac G4 450GH, 768mb ram (AGP graphics ) Mac OS X (10.4) Currently running 9.2 and will be upgrading to OS 10.4

Hi, Thelisa -
Welcome to Apple's Discussions.
Is this article correct or am I misunderstanding it?
Yes, to both - the article is correct, and yes, you seem to be misunderstanding it.
In the context of the article, "Disc drive" does not mean a hard drive. Earlier in the article it states -
Solution
"Disc drive" refers to CD, CD-R, CD-RW, DVD, DVD-RAM, DVD-R, Combo drives, SuperDrives.
The reason is that on most (if not all) G4s, an optical drive must be jumpered as Master in order for it to be a bootable drive. So, if an optical drive has been jumpered as Slave, it can not then be used to boot from the OSX Install disk.
You will need to place the drive to be jumpered as Slave in the top position of the bracket (the drive sled), and the one jumpered as Master in the bottom position of the sled.
The reason for this is the location of the connectors on the IDE ribbon cable (the data cable) - the one jumpered as Master needs to be attached to the end connector of the cable, and the one jumpered as Slave to the middle connector of the cable.
Because of the physical limits of the cable itself, the one jumpered as Slave must be on top, else the connectors won't reach to the proper drive.
Which drive is jumpered as which is your choice, but the one jumpered as Slave must be on top.
If I switch the position of my original drive will I lose access to the data on it?
No.
The designation of Master or Slave is, for the most part, simply to allow the Mac to have a unique physical address for each drive, so it can tell one from the other (this is separate from the pathname addressing that the OS uses). Re-jumpering a drive nor changing its physical location will not affect its contents nor their usability.
One result that may be important sometime is when the machine in question is set up as the Target machine in a firewire Target Disk Mode arrangement - only the drive jumpered as Master will be visible on the Host machine.
Article #58583 - Firewire Target Disk Mode

Oracle9 lite and configuration mode

Similar Messages

Maybe you are looking for