Oradba.exe and ORA-12638
what is oradba.exe and what does it do?
it does not appear to be documented anywhere (on tahiti, it only shows up in an unrelated directory listing example.
i ran it with a healthy database, got errors about not being able to add a group and a user -- so I'm sure it's related to OS authentication and the ORA_DBA group
after running it (but not before) I was unable to connect to the database with any tools (other than the home page), getting ORA-12638 until i commented out SQLNET.AUTHENTICATION_SERVICES = (NTS) in sqlnet.ora
its the bit that creates the ORA_DBA group on windows
Similar Messages
-
I have set up SharePoint 2013 Foundation, SharePoint Reporting Services and SQL Server 2012 in a single server. I then created a Data Connection to Oracle 11g. Upon testing the connection, it throws the error “ORA-12638: Credential retrieval failed”.
Given below are the steps of installation and configuration.
Installation till basic authentication:
The installation has been done in a
single server.
Installed SQL Server 2012 (Developer version).
Selected only the following features:
Database Engine Services
Analysis Services
Reporting Services – SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools – Basic
- Management Tools - Complete
2. Installed SQL Server 2012 SP1.
3. Installed SQL Server 2012 SP2.
4. Installed SharePoint Foundation 2013.
5. Created web application (without Kerberos; we did not even create the SPNs).
The application pool has been configured to use Reporting Services account since it is a single server installation. This account has been registered as a managed
account.
6. Created Site Collection.
7. Verified that Reporting Services is not installed.
8. Installed SharePoint Reporting Services from SharePoint 2013 Management Shell.
9. Verified that Reporting Services is installed.
10. Created a new SQL Server Reporting Services Service Application and associated the Web Application to the new SQL server Reporting Services Service Application.
11. Verified that SQL Server Reporting Services Service Application and its proxy have started. Reset IIS.
12. Created a Site.
13. Created a Data Connection library with “Report Data Source” content type.
14. Created a Report Model library with “Report Builder Model” content type.
15. Created a Report library with “Report Builder Report” content type.
16. Uploaded an SMDL to the Report Model library.
17. Added the top level site to Local Intranet instead of as a Trusted Site in the browser settings.
18. Able to create and save a report using Report Builder.
Hence, basic authentication is working and SSRS is able to connect to Oracle database.
Next we have to configure Kerberos settings between SharePoint and SQL Server.
Implementation of Kerberos authentication
In the Report Server machine, opened the file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config and added the Authentication Types of RSWindowsNegotiate
and RSWindowsKerberos.
2. Set up the following SPNs.
a) SQL Server Database Engine service (sqlDbSrv2):
setspn -S MSSQLSvc/CER1110:1433 CERDEMO\sqlDbSrv2
setspn -S MSSQLSvc/CER1110.cer.demo.com:1433 CERDEMO\sqlDbSrv2
In the Delegation tab of the account, selected "Trust this user for delegation to any service (Kerberos only)".
b) Account: SharePoint Setup Admin account (spAdmin2)
setspn -S HTTP/CER1110:9999 CERDEMO\spAdmin2
setspn -S HTTP/CER1110.cer.demo.com:9999 CERDEMO\spAdmin2
In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
c) Account: SQL Server Reporting Service account (sqlRepSrv2)
setspn -S HTTP/CER1110 CERDEMO\sqlRepSrv2
setspn -S HTTP/CER1110.cer.demo.com CERDEMO\sqlRepSrv2
In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
3. Configure the Web Application to use “Negotiate (Kerberos)”.
4. Logged in as SharePoint Administrator to the SharePoint server and opened the top level site in the IE browser.
The Event Viewer logged the login process for the SharePoint Administration account as
Negotiate and not Kerberos.
5. Implemented Kerberos for Oracle database and client.
Able to connect to the Oracle database via Kerberos authentication using SQL Plus.
6. Turn on Windows Firewall.
7. While testing the site's data connection using Kerberos settings, got the error
“Can not convert claims identity to windows token. This may be due to user not logging in using windows credentials.”
Note: The Data Connection for basic authentication still worked.
8. Created a Claims to Windows Token Service account (spC2WTS2).
9. Started the Claims to Windows Token Service.
10. Registered the Claims to Windows Token Service account as a Managed Account.
11. Changed the Claims To Windows Token Service to use the above managed account.
12. Verified that the Claims to Windows Token Service account (spC2WTS2) is automatically added to the WSS_WPG local group on the SharePoint box.
Note: The Reporting Services service account is also a part of the WSS_WPG local group.
13. Added the Claims to Windows Token Service account (spC2WTS2) to the Local Admin Group on the machine having the SharePoint App Server.
14. In the SharePoint box, added the Claims to Windows Token Service account (spC2WTS2) in the Act as part of the operating system policy right.
15. The Claims to Windows Token Service account (spC2WTS2) has the WSS_WPG group configured.
When the C2WTS service was configured to use the managed account Claims to Windows Token Service account (spC2WTS2) earlier, the spC2WTS2 account was automatically
added to the WSS_WPG local group on the SharePoint box. The WSS_WPG group in turn is configured in c2wtshost.exe.config file.
16. Verified that the Reporting Services account is a managed account and part of the WSS_WPG group.
17. Earlier Service Application Pool - SQL Server Reporting Services App Pool service was associated with the SharePoint Admin account.
Changed this to associate the Reporting Service account with the Service Application Pool - SQL Server Reporting Services App Pool service.
18. Changed the delegation of the Reporting Service account to constrained delegation with Protocol Transitioning. This is because we are transitioning from one authentication scheme (Claims) to another (Windows Token).
For this, the delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use
any authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
Note: The Reporting Service account already had an HTTP SPN.
19. Next, the goal was to make the Claims To Windows Token Service account match the Reporting Service account.
For this, we created a fake SPN for the Claims To Windows Token Service account since the delegation tab was missing.
The delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use any
authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
20. Restarted the SharePoint server.
21. Tested the data connection with the Kerberos settings again.
Got the error
“ORA-12638: Credential retrieval failed”.
Can anyone tell me what is wrong with this setup?http://www.freeoraclehelp.com/2011/10/kerberos-authentication-for-oracle.html
Problem4: ORA-12638: Credential retrieval failed
Solution: Make sure that SQLNET.KERBEROS5_CC_NAME is set in sqlnet.ora and okinit has been run before attempting to connect to the database.
Do check
http://webcache.googleusercontent.com/search?q=cache:5a2Pf3FH7vkJ:externaltable.blogspot.com/2012/06/kerberos-authentication-and-proxy-users.html+&cd=5&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/ -
Oracle 10g ora 12560 and ora 12514 errors
i am a new oracle user. and i have some problems
i installed 10g then,
when i was creating a database,
i received an error messagge "ora-12560",
therefore i cancelled creating database.
i run sqlplus, i received error messagge again
but this messagge differ from first one. it is "ora-12514"
and i tested net manager my oranokta in tnsnames,
same problem is continuesly
and last thing i have a toshiba notebook with intel centrino 1.6
and windows xp with sp2.
i attached below my tnsnames, listener and sqlnet.ora files.
listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = muttim)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
sqlnet.ora
# sqlnet.ora Network Configuration File: D:\oracle\product\10.1.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
tnsnames.ora
# tnsnames.ora Network Configuration File: D:\oracle\product\10.1.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORA10 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = muttim)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = Ora10)
ORANOKTA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = muttim)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = OraNokta)
thank you for helphi oradba
i opened
start=>run=>services.msc
i didn't find "oracleservice<sid>"
and
i found dbca logfiles,
i attached them
cloneDBCreation.log
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0641: "EXECUTE" sunucu bağlantısı gerektirir
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
CloneRmanRestore.log
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
lockAccount.log
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
postDBCreation.log
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0641: "EXECUTE" sunucu bağlantısı gerektirir
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
postScripts.log
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
dropping default lexer preference...
SP2-0640: Bağlı değil
dropping default wordlist preference...
SP2-0640: Bağlı değil
dropping default stoplist preference...
SP2-0640: Bağlı değil
dropping default policy...
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
lang_abbr değerini girin: SP2-0310: "D:\oracle\product\10.1.0\db_1\ctx\admin\defaults\drdefset.sql" dosyası açılamıyor
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
SP2-0641: "EXECUTE" sunucu bağlantısı gerektirir
SP2-0640: Bağlı değil
rmanRestoreDatafiles.sql
set echo off;
set serveroutput on;
select systimestamp from dual;
variable devicename varchar2(255);
declare
omfname varchar2(512) := NULL;
done boolean;
begin
dbms_output.put_line(' ');
dbms_output.put_line(' Allocating device.... ');
dbms_output.put_line(' Specifying datafiles... ');
:devicename := dbms_backup_restore.deviceAllocate;
dbms_output.put_line(' Specifing datafiles... ');
dbms_backup_restore.restoreSetDataFile;
dbms_backup_restore.restoreDataFileTo(4, 'D:\oracle\product\10.1.0\oradata\OraNoktaDB\USERS01.DBF', 0, 'USERS');
dbms_backup_restore.restoreDataFileTo(3, 'D:\oracle\product\10.1.0\oradata\OraNoktaDB\SYSAUX01.DBF', 0, 'SYSAUX');
dbms_backup_restore.restoreDataFileTo(2, 'D:\oracle\product\10.1.0\oradata\OraNoktaDB\UNDOTBS01.DBF', 0, 'UNDOTBS1');
dbms_backup_restore.restoreDataFileTo(1, 'D:\oracle\product\10.1.0\oradata\OraNoktaDB\SYSTEM01.DBF', 0, 'SYSTEM');
dbms_output.put_line(' Restoring ... ');
dbms_backup_restore.restoreBackupPiece('D:\oracle\product\10.1.0\db_1\assistants\dbca\templates\Seed_Database.dfb', done);
if done then
dbms_output.put_line(' Restore done.');
else
dbms_output.put_line(' ORA-XXXX: Restore failed ');
end if;
dbms_backup_restore.deviceDeallocate;
end;
select systimestamp from dual;
ultraSearchCfg.log
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
============== Ultra Search Configuration ==============
============== argument list
WKSYSPW=XXXXXXXX
JDBC_CONNSTR=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=muttim)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=OraNokta)))
LAUNCH_ANYWHERE=false
CONN_STRING=
OH=D:\oracle\product\10.1.0\db_1
JDBCDRIVER_PATH=D:\oracle\product\10.1.0\db_1\jdbc\lib\classes12.zip
JDBCNLS_PATH=D:\oracle\product\10.1.0\db_1\jdbc\lib\nls_charset12.zip
JRE_HOME=D:\oracle\product\10.1.0\db_1\jdk\jre\
JAVA_EXE_PATH=D:\oracle\product\10.1.0\db_1\jdk\bin\java.exe
PSEP=;
CTXHX=D:\oracle\product\10.1.0\db_1\bin\ctxhx.exe
==================
ERROR:
ORA-12560: TNS: Protokol bağdaştırıcısı hatası
SP2-0640: Bağlı değil
============== populating the WK$CRAWLER_CONFIG_DEFAULT table
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
============== load crawler classpath
...... setting the crawler classpath
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
============== updating crawler configuration
SP2-0640: Bağlı değil
SP2-0641: "EXECUTE" sunucu bağlantısı gerektirir
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
...... creating lexer preference
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
SP2-0640: Bağlı değil
...... creating wordlist preference
SP2-0640: Bağlı değil
...... creating storage preference
SP2-0640: Bağlı değil
...... creating stoplist
SP2-0640: Bağlı değil
...... creating section group
SP2-0640: Bağlı değil
...... creating zone sections
SP2-0640: Bağlı değil
...... creating field sections
SP2-0640: Bağlı değil
...... creating filter preference
SP2-0640: Bağlı değil
...... creating datastore preference
SP2-0640: Bağlı değil
... checking for invalid objects... see list below
================== list start
SP2-0640: Bağlı değil
================== list end
============== End of Configuration ==============
note : my operating system's language is turkish. -
ORA-604 and ORA-4031 during installation of SAP
Hi,
I tried to install Oracle 10.2.0.2 on Windows 2003 with SAP R3E 47X2.
However, during the installation on the Database Load phases it pops up a ORA-604 and ORA-4031 error log. It was unable to completed the Database Load phase showed as R3 load jobs: running 1, waiting 0.
I tried to set the share pool in init.ora as shared_pool_size = 40000000. It still show up as shared memory issue.
The log shows as,
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: START OF LOG: 20081201110818
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
Compiled Dec 15 2005 22:22:21
E:\usr\sap\IDE\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Failed to register client info: orc=604
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=15)
(DB) ERROR: DDL statement failed
(TRUNCATE TABLE "DYNPSOURCE")
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select user#,type# from user...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201110858
Could anyone help me about it?
Thanks.hi Nikhuj,
I reset the installation and however endup the installation still have an error. Please help me to check with the following:
SQL> connect system
Enter password:
ERROR:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
pool","select ts#,file#,block#,nvl(...","Typecheck","kgghtInit")
SQL> show parameters shared_pool;
NAME TYPE VALUE
shared_pool_reserved_size big integer 12881756
shared_pool_size big integer 124M
SQL> alter system set shared_pool_size=40000000;
alter system set shared_pool_size=40000000
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04034: unable to shrink pool to specified size
As I had changed the parameter in initsmpl.ora shared pool from 10000000 to 40000000. The log as below was showing that:
SAPAPPL1.log:
Error accessing package DBMS_APPLICATION_INFO
Connected.
(IMP) INFO: import of LXE_PPX__1 completed (1 rows) #20081201200124
(DB) INFO: LXE_PPX__1~0 created #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=34)
(DB) ERROR: DDL statement failed
(CREATE INDEX "LXE_PPX__1~CNT" ON "LXE_PPX__1" ( "T_LANG" , "S_LANG" ,
"DOMATYP" , "DOMANAM" , "USAGECNT" ) TABLESPACE PSAPIDE STORAGE (INITIAL 0 NEXT
0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129
SAPAPPL2.log:
(DB) INFO: TCN2T~0 created #20081201200843
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "TCN41" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "PLNAW"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFIDNETZ" VARCHAR2(21) DEFAULT ' ' NOT NULL
, "FLG_ERF_H" VARCHAR2(3) DEFAULT ' ' NOT NULL , "ESOKZ" VARCHAR2(3) DEFAULT ' '
NOT NULL , "EKORG" VARCHAR2(12) DEFAULT ' ' NOT NULL , "KSTAR_FRMD" VARCHAR2(30)
DEFAULT ' ' NOT NULL , "STEUS_WORK" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"STEUS_FRMD" VARCHAR2(12) DEFAULT ' ' NOT NULL , "STEUS_PRIM" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "KSTAR_COST" VARCHAR2(30) DEFAULT ' ' NOT NULL ,
"KSTAR_SERV" VARCHAR2(30) DEFAULT ' ' NOT NULL , "STEUS_SERV" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "DAUNE" VARCHAR2(9) DEFAULT ' ' NOT NULL , "ARBEH"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "WAERS" VARCHAR2(15) DEFAULT ' ' NOT NULL ,
"SLWID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "LVARI" VARCHAR2(6) DEFAULT ' ' NOT
NULL , "INDET" VARCHAR2(3) DEFAULT ' ' NOT NULL , "BUKRS" VARCHAR2(12) DEFAULT '
' NOT NULL , "AOB_KEY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "VORNR_DEL" VARCHAR2
(12) DEFAULT ' ' NOT NULL , "TERKZ" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AUART"
VARCHAR2(12) DEFAULT ' ' NOT NULL , "WERKS" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"DISPO" VARCHAR2(9) DEFAULT ' ' NOT NULL , "RSCHL_OFER" VARCHAR2(18) DEFAULT ' '
NOT NULL , "RSCHL_OFRD" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFER"
VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFRD" VARCHAR2(18) DEFAULT ' ' NOT
NULL , "RSCHL_OCST" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UCST" VARCHAR2(18)
DEFAULT ' ' NOT NULL , "GR_PRF_GR" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"GR_PRF_NAM" VARCHAR2(36) DEFAULT ' ' NOT NULL , "FHORI" VARCHAR2(9) DEFAULT ' '
NOT NULL , "NETSTUFE" VARCHAR2(6) DEFAULT '00' NOT NULL , "VAGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MSGTY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AOB_DARST"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "VRG_DARST" VARCHAR2(3) DEFAULT ' ' NOT NULL ,
"NO_DISP" VARCHAR2(3) DEFAULT ' ' NOT NULL , "COLKZ_ELEM" VARCHAR2(33) DEFAULT '
' NOT NULL , "COLKZ_TEIL" VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_MLST"
VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_DOKU" VARCHAR2(33) DEFAULT ' ' NOT
NULL , "COLKZ_MAT" VARCHAR2(33) DEFAULT ' ' NOT NULL , "VSPRF" VARCHAR2(21)
DEFAULT ' ' NOT NULL , "CLASF" VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFILE_ID"
VARCHAR2(30) DEFAULT ' ' NOT NULL , "BALK_PROF" VARCHAR2(36) DEFAULT ' ' NOT NULL
, "KBED" VARCHAR2(3) DEFAULT ' ' NOT NULL , "KKALKR" VARCHAR2(3) DEFAULT ' ' NOT
NULL , "LSTVAR" VARCHAR2(36) DEFAULT ' ' NOT NULL , "MATKL" VARCHAR2(27) DEFAULT
' ' NOT NULL , "MATEXIT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "EKGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MATKL_FRMD" VARCHAR2(27) DEFAULT ' ' NOT NULL ,
"EKGRP_FRMD" VARCHAR2(9) DEFAULT ' ' NOT NULL , "POSNR_MAT" VARCHAR2(12) DEFAULT
'0000' NOT NULL , "SCHED_END" VARCHAR2(3) DEFAULT ' ' NOT NULL , "SCEND_ACT"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "NT_SEARCH1" VARCHAR2(6) DEFAULT ' ' NOT NULL
, "NT_SEARCH2" VARCHAR2(6) DEFAULT ' ' NOT NULL , "NT_SEARCH3" VARCHAR2(6)
DEFAULT ' ' NOT NULL , "MFLIC" VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_FRMD"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_SERV" VARCHAR2(9) DEFAULT ' ' NOT NULL
, "KSTAR_MATVORPL" VARCHAR2(30) DEFAULT ' ' NOT NULL , "KZERB" VARCHAR2(3)
DEFAULT ' ' NOT NULL , "VALID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "VALID_VG"
VARCHAR2(21) DEFAULT ' ' NOT NULL , "SUBST" VARCHAR2(21) DEFAULT ' ' NOT NULL ,
"SUBST_VG" VARCHAR2(21) DEFAULT ' ' NOT NULL , "FPART" VARCHAR2(6) DEFAULT ' '
NOT NULL ) TABLESPACE PSAPIDE STORAGE (INITIAL 65536 NEXT 0000000040K MINEXTENTS
0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4040 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200843
SAPAPPL0.log:
(DB) INFO: PA0398~0 created #20081201200124
(DB) INFO: PA0399 created #20081201200124
(IMP) INFO: import of PA0399 completed (12 rows) #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "PA0399~0" ON "PA0399" ( "MANDT", "PERNR", "SUBTY",
"OBJPS", "SPRPS", "ENDDA", "BEGDA", "SEQNR" ) TABLESPACE PSAPIDE STORAGE (INITIAL
0 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129 -
Cannot connect to 10g instance from 11g client (ORA-12638)
Hi,
I don't know why I have problems when I connect from a 11g client to a 10g server. I get the error ORA-12638.
However, it works fine doing the same with a 10g client.
Can anybody tell me how to avoid this problem without having to install the 10g client ?
Thanks in advance.
Regards.Hi, user7409638,
To understand the problem, I advice you to enable tracing and have a look at it.
As you may know, ORA-12638 is the problem with the authentication service.
It was just unable to get your credentials.
If you want me finally get the solution, please report it at my system http://1dayotn.blogspot.de/p/question-me_7.html
If you have any questions, ask.
Kirill Babeyev -
when i try yo connect to oracle8I with(sql plus, oem: dba studio)using system ( sysdba, sysoper, normal) i got the error messge ora-12638 impossible to extract the preferences of users, can anyone help me please( it's a production database)
thanksWhich OS are you using? are you using the base version 8.1.6? Try upgrading to 8.1.6.3.1 on both the server and clients. or try setting
sqlnet.authentication_services=(none)
in your sqlnet.ora file. -
Hi,
I'm receiving the following error when I try to start RMAN from a command prompt. I can connect to the database from the Enterprise Manager and from SQLPlus without any problems. I've read about removing the sqlnet.authentication_services line from sqlnet.ora, but I don't know if I should since the database connects fine outside of RMAN:
C:\>rman target sys/password@DB1
Recovery Manager: Release 10.2.0.1.0 - Production on Mon May 15 10:01:40 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12638: Credential retrieval failed
Thanks,
NoraHi,
In 'C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN', my files look like this (the line in sqlnet.ora is still present-- i haven't removed or changed it yet):
TNSNAMES.ORA
# Generated by Oracle configuration tools.
DB1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = db1)
SQLNET.ORA:
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
LISTENER.ORA:
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = DB1)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(GLOBAL_DBNAME = DB1)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1)(PORT = 1521))
I don't get ORA-01031 in RMAN with this configuration, but I do get ORA-12638.
Otherwise, I can connect fine to my database if I don't use 'connect / as sysdba'.
Thanks again,
Nora -
I have installed Oracle 9.2 on W2000 Server. I have created an asp web page by dreamweaver accessing Oracle hr sample. When I use the 'using DSN on testing server' to connect to Oracle, it gives me the error ORA-12638. I have set the security for IUSR and IWAM on the Oracle folder. Also I am using ODBC driver from Oracle. Please help!!
HTTP 500.100 - 內部伺服器錯誤 - ASP 錯誤
Internet Information Services
技術資訊 (供技術支援人員使用)
錯誤類型：
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Oracle][ODBC][Ora]ORA-12638: 證明資料擷取失敗
/master.asp, line 5
瀏覽器類型：
Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)
頁數：
GET /master.asp
時間：
2003年5月28日, 下午 04:07:13
** The error message in English is [fail to retrieve identification information]
When I create the dsn in Windows, I can test the connection with no problems. In dreamweaver there are 2 options : 1) use local DSN 2)use DSN on testing server. When I use local DSN, it was fine. Since my machine is the web server, I have to choose option 2).
As I mentioned before, I have set the security options of the Oracle folder accessible to Iusr, Iwam and authenticated users. -
Warning: ocilogon(): _oci_open_server: ORA-12638
hi,
System: w2k Server on a VMware.
db Oracle 9.i
Webserver Apache
Tomcat
The php-Code is ok. I know it, because the code is running on a secend-computer. When I start my code i see this:
Warning: ocilogon(): ociopen_server: ORA-12638: Abruf des Berechtigungsnachweis misslungen in c:\inetpub-keytec\wwwroot\customers\demo\phpinc\cube\core\data\oracle.php on line 58
I have build me a littel code for testing the conection to the DB. and when i start this code i see the same error.
The user, pwd and the table is ok. i have tested it with the sql+ tool.
help what is rong??
and sorry for my bad english
cu
tomA quick Google comes up with:
http://www.orafaq.com/forum/t/24615/0/
HTH! -
Oracle9i - ORA-12638 Credential retrival failed
Hi,
I am new to Oracle database and my first job is to install oracle9i into Window 2000. The installation failed at Database Configuration Assistant with error: ORA-12638 Credential retrival failed. I tried to create different type of database to see if the problem goes away but it persists. Please help!this is the solution i got from net
On the client computer, modify SQLNET.ORA located in ORACLEHOME/NETWORK/ADMIN directory. Replace the line
SQLNET.AUTHENTICATION_SERVICES=(NTS)
with
SQLNET.AUTHENTICATION_SERVICES=(NONE)
you can try out.. -
Error report on win 8.1 about conhost.exe and werfault.exe
I am not sure exactly what is happening, but I have noticed recently a new problem with CONHOST.EXE and werfault.exe each time I was opened application. and I didn't know exactly about was there have relationship with my brightness control
(increase or decrease) than I can't make any change after first time I have noticed about conhost.exe and werfault.exe. and other problem than my laptop more 'slowly' than before, but the console window will remain open fastly enough. (The host process
exists, but I can see an orphaned CONHOST.EXE for the application in Task Manager.)
I hope someone who sees this knows why this is happening, and can help me fix the problem.
Thanks!Hi,
Here is the details about conhost.exe process:
Windows 7 / Windows Server 2008 R2: Console Host
http://blogs.technet.com/b/askperf/archive/2009/10/05/windows-7-windows-server-2008-r2-console-host.aspx
Same within Windows 8.
The werfault.exe is used for Windows Error Reporting.
You can go to event viewer to check if there are any error messages.
For this kind of issue, you may also try Clean Boot to see if this problem persists.
Alex Zhao
TechNet Community Support -
Ora-00604:error occurred at recursive SQL level 1 and Ora-04023
hi all
i am using oracle linux 5.5 and oracle Database 11g R2 while shutingdown the database i am getting
the following errors.
SQL> shutdown immediate;
Ora-00604:error occurred at recursive SQL level 1
Ora-04023: object select count(*) from reg$SQL>plz can anyone help me out?Couple of questions related to this issue:
1.Is there anything in alert log. Post last 50 lines from alert log.
2.Is there any trace / log generated by Oracle ?
3.What is Memory_Target parameter value ?
4.What is value of statistics_level parameter ?
5.Did you perform any failed upgradation ?
6.Are there any invalid objects in database ?
Generally ORA-00604 is related to insufficient size of shared pool. Now, i am googling how to get a proper value of shared pool size ? I got that there is a view v$shared_pool_advice which will tell me the answer of this question. Ok, it means now question is how do i get the proper value of shared pool from v$shared_pool_advice; i mean how do i interpret this v$shared_pool_advice view ?
No problem docs are there to answer this question : (How i got this link ? Open a new page---http://tahiti.oracle.com---selected 11.2 docs--in the left hand sided there is a search text box i entered v$shared_pool_advice and i got couple of links)
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/dynviews_3037.htm#REFRN30239
I will read these links and now i will query this and DBA_HIST_SHARED_POOL_ADVICE views, interpret the values. Ok, but what about my original question i.e. ORA-00604 and 4023 ? If i am at this stage, understood all the values, it means now i can understand the meaning / sense of resizing of shared pool.
ALTER SYSTEM SET statistics_level=TYPICAL SCOPE=SPFILE;
You can monitor V$SGA_RESIZE_OPS to identify the range of values that Oracle is automatically resizing the DB_CACHE_SIZE and SHARED_POOL_SIZE components to. Then, pick an appropriate minimum value based on the range. There's no "magic formula". But V$SGA_RESIZE_OPS shows the sizes that Oracle has been automatically been resizing the SGA components to. The Buffer Cache Advisory section of the AWR report or V$DB_CACHE_ADVICE, V$SHARED_POOL_ADVICE, V$SGA_TARGET_ADVICE and DBA_HIST_SGA_TARGET_ADVICE are views that provide advisory information as well. Hemant @ SGA_MAX_SIZE and SGA_TARGET how to set minimum for pools
So, these are the baby steps if i ever gets ORA-00604 and ORA-04023 on my test database. Do all these and feel free to post the next doubt, i am sure you will get the correct answer.
Regards
Girish Sharma -
My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.
Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working. -
Itunes will not stay close ever since I updated to 10.5.3 version. I try to close program and it pops right back up! The only way to close is open tack manager and stop the itunes.exe and the itunes.help then it will stay close. I did a system restore back to the earlier version of itunes but problem presisted. I finally did the task manager again and downloaded the update to 10.5.3 and this seemed to resolve the problem for awhile but now it is back! Is anybody else experiencing this problem? and where you able to correct it? I'm running Windows 7 64 bit have never had a problem with anything till now. I ran scans of my machine no viruses.
Hi,
i have exactely the same problem.
After the update to v10.5.3 iTunes isn't shutting down anymore. I have this error on various Windows versions (XP SP3, Win7 x86, Win7 x64.
On my private Notebook v10.5.2.11 still works! I won't update iTunes there - not even for a test .
/Tom -
When I try to install itunes 10.5.2, I get the following error message "The installer has insufficient privileges to modify this file c\progamfiles\itunes\itunes.exe and won't install. help
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled
Maybe you are looking for
-
How do you fix an LCD screen ripple dot in the center of the display (Macbook pro 13 inch late 2011
There is a small dot that ripples in the center of the screen. I have an Early 2011 macbook pro 13 inch and it should not have any problems with it. Does anyone have suggestions?
-
I've just been given a new project which is to take an ASP site and convert it to CF. Sounds easy enough...but I can't get the CF variables to work/display. Here's what I've done so far: 1 - Copied all ASP and associated site files to a new developer
-
Transaction not authenticated. payment_status= pending_reason= result=
Hello, all! I am using a third party merchant to help process payments and send download emails. In my sandbox enviroment, the setup works flawlessly. I am using my wife's paypal account for testing purposes when purchasing from my business account.
-
"Flash Player quit unexpectedly." Why?
I get this all the time, especially when I have Facebook open, too. What can I do? Thanks
-
OC4J with EJB 2.1 release date?
Is there any release date available for the OC4J with EJB 2.1 support?