Status Flag not appearing if branching

I have a CP project with branching after a question slide (slide 14). If the user gets the question wrong, they follow an alternate path to slide 15 to review the correct answer. Then they hit slide 16. If they get the question right, they skip slide 15 and hit slide 16. The user who gets the question right will never see slide 15, thus making the TOC think they didn't see all the slides. The TOC will not mark the module as complete with a status flag. Help?

Hello,
TOC can help users by marking slides as seen. But you have to be aware that only slides that are completely viewed will get the status flag. It is also great for self paced learning, for navigation. From your question I understand that you want it to take over the role of a LMS: completion of a course is normally reported by the LMS. Even there a branching in a course will cause problems if you want to have a Completed status reported. For a LMS you could indicate which % of slides have to be watched.
What do you really want to achieve with the TOC? Perhaps it could be realized with some variables and advanced actions.
Lilybiri

Similar Messages

Date and time stamp of user status does not appear

Hi, gurus.
For a specific transaction type, the date and time stamps for certain user statuses do not appear within the transaction although these missing date/time stamps are captured in the database upon checking by our ABAP. It seems that this problem started when I added several statuses and rearranged their status numbers in the status profile last year.
I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
E.g.
Status Profile
Status No.     ---       Status Code      ---            Short Text
10            ---                    IP1L                   ---       In Process 1st Level
20            ---                    IP2L                   ---       In Process 2nd Level
Date Profile
Display Position   ---       Date Type
1                          ---       In Process 1st Level
2                          ---       In Process 2nd Level
We're going to create and assign a new status profile for the concerned transaction type. We'll make sure that this status profile is sychronized with the date profile. Hopefully, the date/time stamps will all be displayed in prospective transactions but the problem on the missing date/time stamps in historical transactions will still remain.
Pls. help us.
Thanks in advance,
Theresa

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

Physical Inventory Status Flag Not Reset after Year End Inventory Procedure

Hi,
We are just done with the Year End Inventory Procedures, and to my surprise, a lot of Storage Bins are having their Physical Inventory status flag as ACTIVE, which they should not have.
An example bin has incorrect status-u201Ccountedu201D in the associated inventory record number . LINV status is L-cleared. LINK status is Z-counted, LINP status is Z-counted and physical inventory flag is ON in table LAGP, but status must be L-cleared and physical inventory flag should be OFF (or blank) in table LAGP.
Our users did not use LI20 to clear the empty bins or bins had no difference to post (meaning book qty & count qty are the same).
I already tried the Program RLREOLPQ and OSS Note 824904, but no its of no use in our Case.
Any guess/hint for the problem?

I solved this with thehelp of a Zprogram writeen wrt the OSS note mentioned above in the question.

Acceptance Flag not appearing in Service Entry Sheet

Hi experts,
At the time of service entry creation, acceptance flag is not appearing. I am facing this problem with one particular SAP Login ID only.
With the same PO, the acceptance Flag is appearing in another SAP Login ID.
I think it seems to be setting problem. Please guide me.
Suggestions / Solutions will be highly appreciated
Regards,
( Rajneesh Gulati )

Hi,
Enter the SRN acceptance screen (ML81n) where you arn't getting the flag and type "/NSU53".
The system will give you all the missing authorizations in the screen for the i.d.
then forward the same to ur basis team for providing the missing authorization.
Thank you

Release button flag not appearing in ML81N

Dear All
In my development system when I try to release service entry sheet through transaction ML81N in edit mode the release button flag is not appearing but in my quality system this release button flag is appearing.What could be the reason??
Pls help.
Regards
Satish Kumar

Hi,
its authorisation issue,Consult Basis Consultant & Check and compare roles assigned to user ID in both client.
Regards,
Biju K

Orange flag not appearing

When I flag a photo, the little orange flag not longer shows in the upper right corner of the thumbnails. I know it is getting flagged, though because under the "Metadata" menu the status is changing. I'm running version 3.5.1.
It was working the last time I used aperture, as far as I know.

OK, another search of the discussions gave me the answer: https://discussions.apple.com/thread/2736821

Status Field Not appearing in Transaction

Hi all
We have configure all stuff related to Status management
in IMG.But we are unable to see the Field "STATUS" when
we run Transaction.Please guide us where are we missing?
your response will rewarded with points
Regard
imran

Hi,
There could be only one reason for this. Your user status is not attached to the status profile in SPRO.
Please check your SPRO settings for Status Management again.
<b>Reward points if it helps.</b>

Accouting Integration - status does not appear for selection...

We are on PPM5.0. We intend to replicate cProjects into PS.
We have carried out Accouting Integration, with all the required settings/configs.
The Project Type is marked for "Accouting Integration" (with "Flag for Transfer" as the trigger for PS project creation), yet we do not see "Flag for Transfer" in the status drop down at cProjects front end.
Neither after "Create", nor after "Release" does this status appear in the drop down.
Where could we be going wrong?
Please advise.

The object link for accouting integration was not maintained. Issue resolved.

Xmonad Status Bar Not Appearing

Hey guys I've been reading through posts and trying to get dzen2 to appear. But it simply doesn't show up.
So I tried using a default status bar
main = xmonad $ defaultConfig {
logHook = dynamicLog
Provided from
http://xmonad.org/xmonad-docs/xmonad-co … icLog.html
and I still do not have any status bars appearing.
Refer Below, changed my current xmonad configuration.
My xmonad.hs is based of thayer's configuration.
Last edited by Jabrick (2011-10-30 22:01:26)

Ok I've finally got a dzen bar to appear.
In my xinitrc where i normally start xmonad
I now have the line
exec xmonad | dzen2
But nothing appears in the bar I've tried several examples and it doesn't seem to work.
Is there something I'm missing?
I do have a ~/.conkyrc file
That looks like
# Conky Config File
# just log everything to the desktop
# Main options (alphabetically)
alignment bl
background yes
default_color 606060
draw_outline no
draw_shades no
double_buffer yes
gap_x 10
gap_y 10
minimum_size 100 100
own_window yes
own_window_type override
own_window_transparent yes
total_run_times 0
update_interval 1
use_xft yes
xftalpha 0.7
xftfont Verdana:size=8
# After TEXT is formatted on screen
TEXT
${tail /var/log/everything.log 20}
This is my xmonad config file right now....
If I could just get this to work I can finally tinker around.
Been frustrating! Urgh!
--Imports--
import XMonad
--Actions--
import XMonad.Actions.CycleWindows -- classic alt-tab
import XMonad.Actions.CycleWS -- cycle thru WS', toggle last WS
import XMonad.Actions.DwmPromote -- swap master like dwm
--Hooks--
import XMonad.Hooks.DynamicLog -- statusbar
import XMonad.Hooks.EwmhDesktops -- fullscreenEventHook fixes chrome fullscreen
import XMonad.Hooks.ManageDocks -- dock/tray mgmt
import XMonad.Hooks.UrgencyHook -- window alert bells
import XMonad.Hooks.SetWMName -- matlab fix
--Layouts--
import XMonad.Layout.Named -- custom layout names
import XMonad.Layout.NoBorders -- smart borders on solo clients
--Utils--
import XMonad.Util.EZConfig -- append key/mouse bindings
import XMonad.Util.Run(spawnPipe) -- spawnPipe and hPutStrLn
import System.IO -- hPutStrLn scope
import qualified XMonad.StackSet as W -- manageHook rules
main = do
status <- spawnPipe myDzenStatus -- xmonad status on the left
conky <- spawnPipe myDzenConky -- conky stats on the right
xmonad $ withUrgencyHook NoUrgencyHook $ defaultConfig
{ modMask = mod4Mask
, borderWidth = 2
, normalBorderColor = "#dddddd"
, focusedBorderColor = "#0000ff"
-- , handleEventHook = fullscreenEventHook
, workspaces = myWorkspaces
, layoutHook = myLayoutHook
, manageHook = manageDocks <+> myManageHook
<+> manageHook defaultConfig
,logHook = myLogHook status
, startupHook= setWMName "LG3D"
`additionalKeysP` myKeys
-- Tags/Workspaces
-- clickable workspaces via dzen/xdotool
myWorkspaces :: [String]
myWorkspaces = clickable . (map dzenEscape) $ ["1","2","3","4","5"]
where clickable l = [ "^ca(1,xdotool key super+" ++ show (n) ++ ")" ++ ws ++ "^ca()" |
(i,ws) <- zip [1..] l,
let n = i ]
-- Layouts
-- the default layout is fullscreen with smartborders applied to all
myLayoutHook = avoidStruts $ smartBorders ( full ||| mtiled ||| tiled )
where
full = named "X" $ Full
mtiled = named "M" $ Mirror tiled
tiled = named "T" $ Tall 1 (5/100) (2/(1+(toRational(sqrt(5)::Double))))
-- sets default tile as: Tall nmaster (delta) (golden ratio)
-- Window management
myManageHook = composeAll
[ className =? "MPlayer" --> doFloat
, className =? "Vlc" --> doFloat
, className =? "Gimp" --> doFloat
, className =? "XCalc" --> doFloat
, className =? "Chromium" --> doF (W.shift (myWorkspaces !! 1)) -- send to ws 2
, className =? "Nautilus" --> doF (W.shift (myWorkspaces !! 2)) -- send to ws 3
, className =? "Gimp" --> doF (W.shift (myWorkspaces !! 3)) -- send to ws 4
, className =? "stalonetray" --> doIgnore
-- Statusbar
myLogHook h = dynamicLogWithPP $ myDzenPP { ppOutput = hPutStrLn h }
myDzenStatus = "dzen2 -w '320' -ta 'l'" ++ myDzenStyle
myDzenConky = "conky -c ~/.conkyrc | dzen2 -x '320' -w '704' -ta 'r'" ++ myDzenStyle
myDzenStyle = " -h '20' -fg '#777777' -bg '#222222' -fn 'arial:bold:size=11'"
myDzenPP = dzenPP
{ ppCurrent = dzenColor "#3399ff" "" . wrap " " " "
, ppHidden = dzenColor "#dddddd" "" . wrap " " " "
, ppHiddenNoWindows = dzenColor "#777777" "" . wrap " " " "
, ppUrgent = dzenColor "#ff0000" "" . wrap " " " "
, ppSep = " "
, ppLayout = dzenColor "#aaaaaa" "" . wrap "^ca(1,xdotool key super+space)· " " ·^ca()"
, ppTitle = dzenColor "#ffffff" ""
. wrap "^ca(1,xdotool key super+k)^ca(2,xdotool key super+shift+c)"
" ^ca()^ca()" . shorten 20 . dzenEscape
-- Key bindings
myKeys = [ ("M1-<Tab>" , cycleRecentWindows [xK_Alt_L] xK_Tab xK_Tab ) -- classic alt-tab behaviour
, ("M-b" , sendMessage ToggleStruts ) -- toggle the status bar gap
, ("M-<Tab>" , toggleWS ) -- toggle last workspace (super-tab)
, ("M-<Right>" , nextWS ) -- go to next workspace
, ("M-<Left>" , prevWS ) -- go to prev workspace
, ("M-S-<Right>", shiftToNext ) -- move client to next workspace
, ("M-S-<Left>" , shiftToPrev ) -- move client to prev workspace
, ("M-r" , spawn "xmonad --restart" ) -- restart xmonad w/o recompiling
, ("M-x" , spawn "chromium" ) -- launch browser
, ("M-S-x" , spawn "chromium --incognito" ) -- launch private browser
, ("C-M1-<Delete>" , spawn "sudo shutdown -r now" ) -- reboot
, ("C-M1-<End>" , spawn "sudo shutdown -h now" ) -- poweroff
, ("<XF86AudioMute>" , spawn "amixer -q sset Master toggle") --Toggle Volume
, ("<XF86AudioLowerVolume>", spawn "amixer -q sset Master 2- unmute") -- lower volume
, ("<XF86AudioRaiseVolume>", spawn "amixer -q sset Master 2+ unmute") -- raise volume
, ("<Print>" , spawn "import -window root `date '+%Y%m%d-%H%M%S'`.png") --Take a Screenshot

Video and status icons not appearing

I'm trying to set up a chat between my sister in Canada and my parents in the Uk. My sister's using a macbookpro with OSX0.4.1 and ichat 3.18 and my parents are using an imac running 10.3.9 and ichat 2.1
We got into a video chat with my parents the other day, but today although all is good here, my parents can only see themselves in the video - they fill the screen. I don't know how to get them so they see themselves in the smaller preview, and us in the large preview. Also, they don't see the status icons, nor any of the green camera icons next to my name or my sister's name in the buddy list (and apparanty never have). They've tried quitting ichat, unplugging and replugging in the external isight, and rebooting with no difference.
Can anyone help?

Hi Kevin,
iChat sometimes does this.
The easiest fix is to reconnect.
Or restart iChat.
Now in addition they should really check some other places.
With iChat open go to the Video menu.
This should have the Camera Enabled item ticked.
In the View menu they should make it Show Video and Show Audio Status.
This will produce the Green icons in their Buddy list if they are not already there.
There are in fact loads of ways to start a Video chat
1) Clicking on the Green icon for that Buddy.
2) Clicking once on the Buddy and then icons at the bottom of the Buddy list
3) From the Buddies Menu
4) Right Clicking /Control Clicking a Buddy and then from the Contextual menu
I can understand that they may have the green icons but not use them.
If the above does not work they should try Repairing Permissions
As they are in iChat 2 and Panther then they may need to Run the Cron Scripts.
See this FAQ for both the previous.
For the second bit they will need MacJanitor (Simplest and cheapest and only does the Cron script)
Download and install
Click the Padlock and type in Admin password
Run the Scripts one at a time or all All Tasks
10:55 PM Thursday; July 12, 2007

Status bar not appearing

I want to see how much hard drive space I have remaining on my MacBook Pro, so I open Finder and press 'show status bar' and the finder window gets bigger, but the bottom, where the status bar should be, is blank. Is there something I'm missing?

if you want to find out how much storage space is used up and how much is left....
try this: click on your apple logo - about this mac - more info - then click on the storage tab. see image.

I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work? The icon does not appear at top status bar..

I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work? The icon does not appear at top status bar..

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT5404 AirPlay Mirroring is compatible with Mid 2011 and newer MacBooks Air, and OS X Mountain Lion.
As you have Mac OS X Snow Leopard, you haven't got a compatible MacBook Air, so you can't use AirPlay Mirroring. However, you can use a third-party app as AirParrot to mirror the MacBook onto your Apple TV > http://www.airparrot.com

Create Service Agreement - In Status field, "Release" is not appearing.

Hi folks,
I am creating a simple Service Agreement in CRM Web UI. Entered all data required like Customer, product, org details, price discount etc.. and tried to "release" before saving.
In the Status field "Release" option is not there to select. I see only "In Process" and "Completed".
Can anybody tell me how to make 'Release' available, so that I can release the document and save it.
The price is not determined for the product. Could that be the reason?
The document is error free as I don't see errors in App log.
Please give me and idea to resolve. Will be generous in giving points.
Regards,
John

Hi Shashidar,
Thank you for your response. Here is the following steps I did:
1. Status profile is CRMORDER
2. In this status profile, I see the following:   Open with status No.10
                                                                    In Process - 20
                                                                    Completed - 30
                                                                    Rejected - 40
3. I added a new entry for Released with status number: 50
4. I have taken care of the Lowest and Highest Limits.
5. I also checked the 'Object Type' as 'Agreement'
Now, I am not clear which Business Trans I should assign. In the drop down list, I see many Bus.Trans for 'Release'
such as APRL - Release / CALL - Release / CREL - Release and so on.
My question is, which one of these should I select. I tried couple of them, it did not work. (Release still not appearing on CRM7.0 Web UI)
Currently, I am trying to release a Service Agreement on the Web UI. I played around with lowest and highest limits a couple of times and it changes accordingly in Web UI. But some reason 'Release' is not visible which carries the status No.50.
I wonder what is going wrong. Any help would be well appreciated with generous points.
Thank you in advance,
Fred

Status flags in TOC not setting

Hi,
I just recently created a project with a table of contents. There are a number of click boxes and 'continue' buttons that pause the project. Sometimes, even though the project has moved on from the slide, the status flag is not set in the TOC. Sometimes it does work though. This is encountered by all users with this project.
Suggestions?

Hi there
I think you may be encountering the following situation.
If you have a Click Box or Button object that is left at the default action of "Continue", the playhead continues to advance and it reaches the slide end. Once it reaches the slide end, the flag is set to indicate the slide has completed.
If you change the default action from Continue to "Go to the next slide" or perhaps "Jump to slide", the playhead never really reaches the end of the slide. So Captivate doesn't consider the slide to have been "visited".
Thoughts here are to possibly stage the Buttons or Click boxes so they pause at the actual end of the slide? Then Captivate may consider the slide to have been viewed and set the flag accordingly. Perhaps try that.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Firefox 4 upgrade how do I reset Yahoo toolbar as its does not appear in dropdown VIEW list? Also Norton Internet Security 2011 does not flag up safe/unsafe sites on browser. Help

Just upgraded to Firefox 4. My Yahoo toolbar has disappeared and I can't work out how to reset it as it does not appear in the View drop-down list. Also NIS 2011 no longer flags up safe/unsafe sites when browsing.
Thanks

For the Yahoo toolbar, make sure you have the latest version that is compatible with Firefox 4, available from https://addons.mozilla.org/firefox/addon/yahoo-toolbar
Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Status Flag not appearing if branching

Similar Messages

Maybe you are looking for