Orders mismatched in MCI8 report

The problem is in MCI8 report , when I am entering the period as 01/2012 for the order type PM01,
the report appears as follows:-
Orders created =1155
Immediate orders=0
Planned orders=1925
Unplanned=3
Completed=1121.
My order type PM01 is put as planned order in the settings for planning indicator.Than why is this difference between
orders created and planned orders?
Also how come unplanned orders appear in this report?
Also, if I check in IW39 report for PM01 for the period 01/01/2012 to 31/01/2012 , the total orders created appear as 1932.
Whys this difference of 1932-1925=7 orders appear in both the reports?

Already you have opened the thread for this question. Close that thread or this thread either. Don't create duplicate threads.

Similar Messages

  • Maintenance Cost Key Figures in MCI3 and MCI8 Reports

    we are using ECC6 EHP4 version. Maintenance Cost Key Figures in MCI3 and MCI8 Reports are not reflected the cost as given in different value categories in work orders. I have configrured the PMIS "Assign Value Categories to Maintenance Cost Key Figures" and Valuation Cateogies are also rightly configured. is it some bug or am I missing some thing. Please help

    Thanks for your help.
    I checked transaction code OMOS. all infor structure are on monthly update which is fair. however, I rebuilt the info structure through folllowing navigation path and it worked.
    believe ur info structure S070-MCI7 is not getting update correctly , suggest u to run a statistical update via
    Logistics - General + Logistics Information System (LIS) + Logistics Data Warehouse + Data Basis + Tools + Setup of Statistical Data + Application-specific Setup of Statistical Data + Perform Setup - Plant Maintenance ..

  • Query of mci8 report

    Hi experts
    I use mci8 report to display corresponding cost.I find some fields like immediate,planorders,unplan orders in the report.can anyone explain what are these fields's meaning? thanks
    regards

    Hi Mark,
    Heres the explaination:
    Three order planning indicators are predefined by SAP:
    o   Planned order. You should use this indicator for order types, for
        which tasks can be anticipated.
    o   Unplanned order. You should use this indicator for order types, for
        which the task cannot be anticipated, but also need not be performed
        immediately.
    o   Immediate order. You should use this indicator for order types, for
        which the necessity of the task cannot be anticipated, but where the
        task must be performed immediately.
    Saurabh.

  • Not able to see Purchase Order No in FBL1N Report

    Dear All,
    I am not able to see Purchase Order Number in FBL1N report. I have tried in change layout by selecting the purchase document but system is not displaying.
    Kindly help me on this.
    Regards,
    Yadayya

    Dear Yadayya,
    in reference to your query please review the SAP note
    152335  Field EBELN in line layout variant for cust./vendor
    Please note that field BSEG-EBELN is not possible for being shown
    with a value in FBL1N and FBL5N as explained in the note above.
    Since Release 3.0, several purchase orders can be offset in one invoice.
    As a result, different purchasing document numbers (BSEG-EBELN) can be
    contained in the different G/L account line items.
    As a result, it is no longer possible to enter a unique purchasing
    document number in the customer/vendor line item.Field BSEG-EBELN is not
    filled in the vendor line item and therefore cannot be displayed in the
    line item display for customers/vendors.
    Hope this information helps to clarify the standard system behaviour.
    Mauri

  • Is there is a way to have a link from purchase order to cost center report.

    Is there is a way to have a link from purchase order to cost center report.
    I am meaning kind of:
    Standard way to customized this link?
    or
    User exit to have this link in place
    or
    Any other solution
    Thanks

    For me it does not make any sense from going from PO to cost center report.
    However, if you want to see the purchase order cost incurred with a cost center, execute KSB1 report. Within the layout, bring "Purchasing Document" field, where you can see the purchase order number in cost center line item report.

  • Report on production order status and shortage report

    I want to know standard report on production order status and shortage report. Kindly suggest.

    COOIS - Production order information system . In this report you can give system status in selection screen  and in report you can get complete status details (both system and user status) .
    shortage report - CO24

  • Purchase Order Creation from ME5A Report

    Hi experts,
    My client wants Purchase Order Creation from ME5A Report.
    He wants show Open Purchase Requisition through ME5A report then he will select Purchase Requisition Number or line item for po creation from there only.
    Please advice how I can map this process in sap.
    Thanks in advance,
    Chandhu

    Why don't you use ME57 to display open PRs and then assign sources and convert them to PO?
    Or use ME57 to assign sources and ME59 to automatically convert them to PO.
    You can create your very own format for report display using  custom "Scope Of List" for ME57.
    Look in SPRO under Purchasing>Reporting>Maintain Purchase requisition lists.

  • Order cost plan in report CN41N

    Hi Gurus,
    Would appreciate if any one of share what is  'Order Cost Plan" in report CN41N.
    Infact, the values displayed in Order cost plan column neither coincide with either Project Cost Plan nor Actual cost displayed.
    Looking forward to hear and thaks in advnace.
    Thanks,
    PSR

    Hi PSR,
    Order Cost Plan in CN41N is PM Order Plan Costs figure.
    If you create PM Order and assign WBS Element/Project Def in Additional Data Tab of PM Order after planning Material services system will consider WBSE as Costing object and Plan and Post cost on WBSE. It will appears in CN41N in Order Cost Plan column.
    Please check
    Hope this will help you.
    Regards,
    Swapnil Kharul.

  • GROUP BY & ORDER BY  in a Report

    How to Implement GROUP BY & ORDER BY in a Report?

    Hi,
    Order by: It is possible to sort the char value according to the values (asc or desc) of an atribute of this char...is this what you were looking for?
    Group by: May be can be achieved by drilldwon sequence, with the grouping char to the left of the char values to be grouped...again, is this what you had in mind?

  • Addition of new fields in MCI8 report

    Hi Experts,
    I am new to the PMIS area.
    I require to add two new fields in the MCI8 report.  I found that the data is coming from table S115.   Will append of fields in this table fulfill my needs.  Or else what shall I do for this.  Please help.

    Hi ,
    find out the what is the structure to display final output.
    try to add your fields in that strucrure through APPEND strucrure . 
    after that   you need to execute the BUFALVDEL report ...  you will see your fields in that report .
    regfards,
    Ajayreddy

  • Steps for implementing PM Order Cost and allocation Report

    Hi experts,
      I would like some of the experts to suggest prior steps involved in implementing PM Order Cost and allocation Report?
      Is there any specific PM documentatio other then help.sap.com documentation?
    Thank you
    arun

    Hi,
    the CO-Sources (and PM is similar there) deliver plan and actual costs in different rows separated with the characteristics 0VTYPE and 0VERSION (this one separating different versions of plan data) in your case you will get in your transactional data:
    ServiceOrder   0VTYPE    SWG (i leave the rest of the keys and attributes out)
    SO1000          20             15.000 €   for your plan date
    SO1000          10             10.000 €   that are your actual data
    so what wil happen if 0VTYPE is not a Key in your DSO is that first the plan record is updated in DSO and then the second actual record overwrites this value becaus both have the same key SO1000.
    You have to define carefully what keys you use in DSO to avoid this. If you can try create a test-Cube on base of the DataSource fields and look how the data are displayed in there because a cube regards all fields as key's.
    regards
    Christoph

  • Can we add Delivery texts/Sales order text in VL10 report

    Hi,
    Is it possible to have delivery texts/sales order texts on VL10 report.
    Please let me know if there is a way to do it.I've looked at the note198137.
    Thanks in advance.
    Regards,
    Rekha

    Yes I am aware of the fact that text is accessed thru read_text FM .....
    My question is what parameters/ field values can we plug in STXH/STXL to get info that a particular "text" entry exists in this table. I have a sales order which has few texts, I want to know if they have an entry in STXH and STXL about their text i.d.s....
    Let me put it this way - What ever entry exists in STXH for this sales Order I want to see that. What parameters of this sales order do I pass in this Table STXH to see that entry ??
    I hope this is clear now

  • Sales Order Blocked Release History Report

    Dear Guru,
    I want a Sales order block release history report as in who released order.
    Regards,
    shahzad

    Hi..
    There is no std report for this.
    But you can have customized report for this using tables CDPOS & CDHDR (FOR history)
    Regds
    MM

  • I have a problem in  MCI8 report in SAP-PM

    MCI8 report is not capturing  cost analysis for equipment.Shows zero for a  period.
    I investigated with cost centers and found equipment has different cost center (in account assignment ) than main work center(responsibility),also checked the cost center of equipment which says 'no activity type maintained" for the cost center.
    Is this a problem?
    comments pls.
    Edited by: Tim_Shivachaliyanda on Sep 30, 2009 5:35 PM
    Edited by: Tim_Shivachaliyanda on Sep 30, 2009 5:40 PM

    Hi,
    Check if the value category cost element has a link to a PM cost keyfigure. Use following customizing path:
    Plant Maintenance and Customer Service
    Information Systems for Plant Maintenance and Customer Service
    Assign Value Categories to Maintenance Cost Key Figures
    After changing any of the PM-IS customizing you should setup table PMCO and the PM-IS infostructures
    using reports RIPMCO00 and RIPMS001 - See note [112841|https://service.sap.com/sap/support/notes/112841].
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

  • Export TO XXL from ALV Grid - Column order mismatch

    Hi All,
    The user is trying to download data from Option -> Export -> Spreadsheet which will create XXL.
    But while downloading there is mismatch in the order of columns displayed on the alv grid & columns downloaded.
    All character fields are displayed on left, then date fields then quantity fields are downloaded to XXL. but in ALV Grid user has chosen a layout in which date fields come first.
    Please help me to find solution

    Grid display using    'REUSE_ALV_GRID_DISPLAY'. From the alv grid output, user is trying to download data using export -> Excel . so for download there is no custom code.
    We have copied standard report and added few more fields to the custom report. strangely Standard report also has this issue.
    I searched for SAP notes also..no clue

Maybe you are looking for