Organizational structure Management by BAPI

Hello,
We want to maintain (Create/Change/Delete) the Organizational structure
by BAPI.
Make all the Staff assignments in the Organization Unit and its Positions.
In other words we want to use all the PPOME transaction actions, by BAPI
or something else.
Can any one help us with suggestions ?
Thanks in advance.
Gilad.

Hello Suresh,
Thanks, it works!
Gilad.

Similar Messages

  • Organization structure for Inventory management

    Hi All,
    I am looking for organization structure specific to inventory management and also data flow architecture.
    If there is any standard org structure is available please share with me.
    Regards
    Vijay

    I am looking for organization structure specific to inventory management and also data flow architecture.
    > If there is any standard org structure is available please share with me.
    Hi Vijay,
    Standard Org Structure for IM starts with Plants and ends with Storage Locations. You can create required no of storage locations under your plants, where plants are assigned to company codes. Its always better to copy from master plant 1000/0001 while creating the plants where you can make changes during creation where required (factory calendar etc).
    All the material movements within the plant happen between storage locations, material-material, special stocks-unrestricted stocks with no accounting effect.
    Movements between the plants can be planned wrt your needs such as STO with no financial postings unless you have plant wise PCA
    You can follow the standard avaiable structure for your IM org structure.
    Regards
    Shiva

  • TIME MANAGEMENT AND ORGANIZATIONAL STRUCTURE

    Good afternoon,
    We are going to customize the Time Management (PT) and the Organizational structure (OM) modules in SAP version ECC 6. At the moment we have installed an configured a lot of SAP modules: Personal Administration (PA), Payroll (PY), besides other modules not related directly with HR like PM, MM, IS-U, etc.
    We need::
    - To be able to define the organizational structure of the company with every work unit, inside every work unit locate the employees with their functions and positions, etc.
    - To know the number of employees that are avalaible for a service requirement (PM module)
    - To manage with SAP all the absences when the employees don't go to work.
    We have had training of some official courses but I think that they are not enough to achieve the goal, I think we need some kind of guide.
    Do you know if exists any consult SAP note or other kind of document where it's explained the steps or the good practices for the customization of these SAP modules (OM, PT).
    Thanks in advance,
    Julian Olmo

    Hi,
    SAP customers and partners can download SAP Best Practices from the SAP Software Distribution Center on the SAP Service Marketplace (http://service.sap.com/swdc) or order via their contracts department. SAP Best Practices are provided  free of charge.
    For downloading SAP Best Practices, customers and partners require a valid S-User ID. For more information about obtaining an S-User ID, see SAP Note 1037574
    You can check whether PT and OM best practice materials are available for your industry type and download.
    Regards
    Chandrashekar

  • Standard Interface (BAPI) for Organizational Structure.

    Dear Experts,
    I want to download the MasterData of a Organizational Structure for a mobile Client, i'm using the MI 7.1 for downloading this, but it needs a standard interface to download the master data,
    can anybody tell wht is standard interface for downloading this master data of a Organizational Structure, and what r the necessary fields for this interface.
    Regards
    Eswar

    Hi Navneet,
      Goto SE80 -> package : CRM_ORGMAN.
    Here you will get all the FM used for Organisation structure in CRM.
    I doubt if CRM as any BAPI in general for Organisation
    Regards,
    Anand.

  • Organizational structure in WM (Warehouse management)

    Hi,
    could You please explain me what is the organizational structure in WM?
    Best regards

    hi
    plz follow the link , this will clear you about WM
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f838d24afa11d182b90000e829fbfe/frameset.htm
    Reward points if helpful
    Thanks and regards
    Ravikant Dewangan

  • Problems assigning BP to a position in the organizational structure

    I tried to assign a bp to a position in the organizational structure,
    but I receive this message "Object cannot be assigned to object CliC
    Agent in the period 21.12.2006 - 31.12.9999".
    Also, I notice that in the screen, the checkbox where i can select for
    the business partner is missing.
    However, I can assign a user to the org structure.
    Before upgrading, it was working. This is the support packages that it was in.
    SAP_ABAP: Level 9
    SAP_BASIS: Level 9
    PI_BASIS: Level 9
    SAP_AP: Level 6
    BBPCRM: Level 6
    After the upgrade to the following,
    SAP_ABAP: Level 10
    SAP_BASIS: Level 10
    PI_BASIS: Level 10
    SAP_AP: Level 7
    BBPCRM: Level 7
    The assigning of business partner to a position no longer works.

    Hi,
    we're facing exactly the same problem, it was all going well until we went on production.... we applied note 997009 which results in a different error... did you manage to find a solution yet ?
    Regards,
    Jacob.

  • Organization structure in CRM 7.0 from ECC and HR

    Hi,
    We are trying to download Org structures from ECC and HR. (CRM 7.0, HR & R/3 ECC 6.0)
    From HR
    The ALE distribution is set across the systems CRM and HR and I did the PFAL run as per the best practices BB C05. There are about 100,000 Idocs inbound to CRM system and out of which about 15K are in 51 status and the rest are in 53 status.
    Observations:
    The Organization structure from HR is not totally mapped in CRM but only a part of it is displayed in PPOMA_CRM.
    The remaining Org units are found in 'non-related objects' selection.
    All the Idocs in failure are in error "Error in subroutine read_namtb for structure  of infotype  ". When I go to the long text
    Message no. 5-109
    Diagnosis
    An error has occurred in subroutine read_namtb for structure  of infotype .
    Procedure
    Check the entry for infotype  in table T777D (structure, IDoc segment, expanded structure) and the corresponding structures.
    I am not sure which infotype needs to be checked in T777D.
    From ECC
    The CRM - ECC connectivity is set. Downloaded all the required customizing objects successfully. Switched the org model to "enhanced backend integration version " and then followed on to SPRO->CRM->Master Data->Organizational Management->Data transfer->Copy SAP ECC structure and selected all the available R/3 Organization assignments available and then selected the "generate selected lines".
    Observations:
    All the generated org units are in GREEN in SPRO but there are no assignments found in PPOMA_CRM not even in the unrelated objects
    Checked tables HRP1000 and HRP1001 from the CRM Sales org unit IDs (ex: O 5000012) created here and they are not found but the generation is in GREEN.
    I will appreciate any assistance I get here.
    << Moderator message - Everyone's problem is important >>
    Regards,
    DT
    Edited by: Rob Burbank on Oct 20, 2010 4:25 PM

    Hello DT,
    Could you please let me know the process how the problem is solved..
    even we are having the same issue like, we have downloaded the Org Model form HR to CRM system, till here it was fine.
    when we are trying to download the ECC sales structure(CRMC_R3_ORG_GENERATE) to CRM system, i have selected all the items and triggered the Gerenerated Selectd Lines, but after all the items are generating in a error with RED.
    Could you please share you knowledge, so that it will help me in figuring out the issue.
    Thanks in Advance DT. Hope you reply back.
    Regards,
    Ven

  • Set up the Organizational structure for MSS scenario

    Hi!
    I would like to set up the Organizational structure for MSS scenario within SAP Portal.
    Question:
    1) How to set up/map real user from SU01 to Manager? (tcode, report)
    2) How to mark them as 'Chief' (tcode, report)
    3) How to be sure that PA & OM are configured correctly and the integration switch is on?
    Which SAP course or SDN blog describes this?
    Thank you very much!
    regards
    Jürgen

    How to be sure that PA & OM are configured correctly and the integration switch is on?
    Check It000 and IT0001 here u will get objects from OM and PA  (position ID , Job Key, organisational Key)
    and integration switch
    check plogi orga , plogi plogi , plogi perli  in V_T77s0
    Edited by: Sikindar on Feb 10, 2009 6:53 PM

  • Organization Structure level

    Hi All,
    I know this is a fundamental question, so guide me if this is not the right place.
    I am new to HCM and am trying to get my fundamentals right. I have been reading a lot about organization structure and organization plan. In real life scenarios when we create an organization structure, is it created at a company code level or enterprise (client) level. Bottom line, is there only one organization structure created per client or multiple?
    Thank you!
    Sudhir

    Hi Sudhir,
    Vishru and Vikrant have given you an excellent start.  I believe you are confusing some terms here - Company Code is determined by the Financial organization and refers to a group having their own set of books - general ledger.  There will be at least one Company Code per country but there may be more than one in a country if you have subsidiaries or divisions that keep their own general ledgers. 
    In HR the Organizational Structure shows who reports to whom.  This may cut across several Company Codes as the CEO may manage the heads of several subsidiaries each of which has their own P&L responsibility.  The structure then continues down in each subsidiary again showing who reports to whom.
    The Personnel Area and Personnel Subarea (Enterprise Structure) usually look at location and function - where a person works and their function in the company.  For example, all persons working at the Corporate Headquarters may be in the same Personnel Area if they are all at the same location.  But they may work in Fianance, HR, Purchasing, etc. which may be separate Subareas.  But each Personnel Area may be assigned to only one Company Code.
    The Employee Group and Subgroup (Personnel Structure)determine the type of pay and benefits the employee may receive.  Example, Salaried Employee, Hourly, Union Worker, Part TIme, Full Time, etc.  These will cross Company Code lines if they have the same benefits, work schedules, pay structure, etc. 
    What you must remember is that every employee has an assignment in the Enterprise Structure, Personnel Structure and Organizational Structure and these are all assigned in IT0001-Organizational Assignment. 
    Paul

  • Organization Structure creation

    Hello Experts,
    We need your help and expert opinion for the below information.
    Currently we are planning to create the organization structure for our client in CRM, as the client is not planning to Implement full blown HR now. We are evaluating the impacts if HR is implemented in near future.
    In this regard can you please provide your expert opinion and inputs with respect to creating Organization structure now in CRM and implementing HR organization structure later in point of time in terms of Configuration changes, Impact on Master and Transactional data.
    Note: However HR is being partially implemented for Employee master which will be replicated to CRM in the current implementation.
    Thanks in advance.
    regards,
    KK

    Hi,
    You can go to spro->CRM->Master data->Organization management->Organisation Model->Create Organization Moodel.
    This is to create a model in CRM.But as mentioned in this thread that once you import the structure from ECC,It may change or overlap the Model that you create in SAP CRM.So beware of that.
    I hope you got the answers to both the questions.
    Please allot the points once convinced
    Puneet

  • Organization structure of AA

    Hi
    can any one tell me what is the organization structure of Asset Accounting
    Thanx in advance

    Hi,
    In addition to providing for the management of assets and their values, asset accounting should offer an organizational structure for assets that reflects the organizational structure of the enterprise. For this reason, the FI-AA component uses the various SAP organizational units. An asset is clearly assigned to these organizational units at any given point in time.
    In addition, you need to classify assets according to various accounting criteria (such as depreciation methods). This classification assists in management-accounting-oriented tasks, and in the summarization of asset values in the general ledger.
    You can assign an asset to a number of organizational units by making entries in the asset master record. These assignments are meaningful primarily in other SAP R/3 applications. However, there are also functions and requirements for Asset Accounting that make it necessary or desirable to make organizational assignments.
    Asset Accounting uses the same company codes as the General Ledger. However, you need to define these company codes further with the specifications needed for Asset Accounting. An FI company code is not usable in Asset Accounting until it has been defined in this way.
    In order to make a company code usable in Asset Accounting, you have to assign a chart of depreciation to the company code. You do so in Customizing for Asset Accounting. Choose Organizational Structures ® Assign Chart of Depreciation to Company Code.
    The business area is another organizational criterion for General Ledger Accounting, in addition to the company code.
    Features
    If you specify in Customizing for the General Ledger that business area balance sheets should be created for a company code, the system requires that assets be assigned to a business area during master record maintenance. The business area can also be adopted automatically from the cost center that you entered. As long as a fixed asset is assigned to a business area, the system makes account assignment of all postings to this asset to this business area, including depreciation and gain or loss postings on asset retirement.
    If you want to assign a fixed asset, which has already been posted, to another business area, you have to transfer the fixed asset to a new asset master record. The posting becomes effective at the same time in the General Ledger. If you do not create business area balance sheets, you can change the business area in the time-dependent assignments in the asset master record.
    Use
    The meanings of the plant and location organizational units are primarily specified in the SAP R/3 logistics components.
    Prerequisites
    You maintain plants and locations in Customizing. Choose Enterprise Structure.
    Features
    Plant
    Generally, the plant is a plant location or branch. The plant has no asset accounting relevance, but it can be used as a sort and selection criterion for reports. You can assign a fixed asset to one plant for a set time in its asset master record. By changing the asset master record, you can change the assignment to a different plant.
    Location
    The location is handled the same as the plant. In addition to a plant, you can make a time-dependent assignment of the asset to a location.
    Address
    In the Customizing definition of the location, you can also specify an address. Using this method, you can indirectly assign an address to an asset. The comprehensive address data consists mainly of
    Street address
    PO box
    Information for communication (such as telephone number)
    Since the address is linked to the location, all assets with the same location must have the same address. You can obtain reports related to the address using a standard report in the FI-AA Information System. You can display the address in the asset master record, on the Time-dependent data tab page.
    Use
    For internal accounting, you generally need to assign asset costs to cost centers. Therefore, you can assign each asset in Asset Accounting to exactly one cost center. You make this assignment in the asset master record. At the level of the cost center, you can then
    Post all depreciation and interest for the asset (see System Settings for Depreciation Posting )
    Plan all future depreciation and interest (for primary cost planning, see Primary Cost Planning )
    Statistically post gain or loss from the sale of assets (see Additional Account Assignment )
    Prerequisites
    If you want to use cost accounting across company codes, then you have to set this up in Customizing for Asset Accounting. Choose Master Data->Specify Cost Center Check Across Company Codes.
    You define the necessary clearing accounts for this for the different company codes in Customizing for General Ledger Accounting. Choose Business Transactions.
    Features: The cost center assignment of a fixed asset can be set to begin on a specific day. If this date changes over the course of time, the system distributes depreciation and interest, according to the appropriate period, to the different cost centers, whereby costs are always allocated to the cost center valid at the end of the depreciation period. The history of the cost center changes can be managed in the system as long as you wish. A cost center can also be assigned to a business area as an asset can. In asset master record maintenance, therefore, the system ensures that the business area of the cost center matches the business area of the asset.
    If you assign assets to more than one cost center at the same time, you have to do one of the following:
    Distribute the costs within cost accounting using a distribution cost center.
    Post depreciation and interest to an internal order and then settle the order
    Hope this helps. please assign points.
    Rgds
    manish

  • How to modify organizational structure for workflow?

    Hi,
    What is the best practice for modifying the organizational structure for workflow? I know I can do all the changes in development and move it to production via transport system but is that always required.
    It seems tedious to transport the org plan from dev to prod every time there is a position change etc.
    And it does not allow you to change it in production since the client is locked.
    I don't even have all the users I have in production in my dev box so I can't assign the correct ones to positions. Would it mean I have to have the users in the dev box mirror the ones in production?
    Thank you,
    Sergiy

    This answer depends on the HR managment that you have there, if the HR area is a good coordinated area the best answer is to configure the system for automatic transports and pass the HR structures in this way, you can lock some dangerous infotypes in the T77TR tables and be sure that you will not have any trouble with that data. the best thing using this option is to have a specific DEV client to transport the HR structures.
    If you will not have any control between the Dev Environment changes and some people will modify in Prod and other people will make transports in a Dev environment, the best option is to open the client and modify the Org structures every time you need it.
    Refers to the SAP Press book Practical Workflow, section 5.4.2.
    Regards.

  • Organizational structure iview

    good night.
    is posible that a manager can display an organizational structure iview and other manager can display others organizational structure iview in the page of general information??
    I enclosed in the box the field that i want use.
    [image|http://www.freeimagehosting.net/uploads/e31f2d26f2.jpg]
    regards

    Hi Juan,
    the view show is the employee selection - what the manager can see is restricted by their authorisations and depending on how you have configured the OADP selections used - on the root objects resolved for the manager and the selections that are used.
    There are many posts on the use of OADP (Object and Data Provider) - have a search and you should find something useful.
    Cheers,
    Chris

  • Organizational structure in export mode

    hi all,
           pls help me out in knowing abt the organizational structure in  expert mode in detail.
    thank you.

    Hi,
    PO10: Change Organizational Unit (Expert Mode)
    PO03: Change Job (Expert Mode)
    PO13: Change Position (Expert Mode)
    PO01: Change Work Center(Expert Mode)
    PP01: Expert mode / General
    By using these expert mode transactions, you can directly change/create/display any infotype of any of the organizational management object. In PPOME, you can also maintain the infotypes thru tabs. However, if you know the names of the infotypes, you can use expert mode which would make your work much faster.
    Regards,
    Dilek

  • Organizational structure from one plan variant to another

    Hello,
    We want to make a copy of an organizational structure from one plan variant to another. This copy should include all
         assignments like purchasing groups to organizational units made in PFOM . Can we do this?
    Thanks

    Hello,
    Make sure that the plan number is established through the IMG. (And that it is not the active plan.)
         Go Human Resources -> Organizational Management Tools -> Plan version -> Copy.
         It runs RHCOPL00. All or any portion of the plan maybe copied and manipulated and then copied back in to the active
         plan.
    Thanks

Maybe you are looking for