Orion.edit.validator example not working

The example mentioned in the below link for orion.edit.validator does not seem to work.
https://wiki.eclipse.org/Orion/Documentation/Developer_Guide/Plugging_into_the_editor
Please help with the proper code snippet or example for orion.edit.validator

The code on that page was outdated, I fixed it.
Here's a gist showing a complete working example: https://gist.github.com/mamacdon/cb1e20fd8f967e97cfb4

Similar Messages

  • The "FIND" feature in the Edit menu does not work. I can't find anything on a webpage

    The "FIND" feature in the Edit menu does not work. I cannot search a page. If I am looking for the word "Doctor" and I know it is on the page. All I get after typing the first letter is that the typing box turns red.
    This is not fun.

    Make sure that <b>[] "Match case"</b> on the Find bar (Ctrl+F) doesn't have a check-mark.

  • FCP 7.0.3 ripple edit in timeline not working

    FCP 7.0.3, AVCHD/proRes 422 LT, ripple edit in timeline not working. Using the ripple tool, I click on the edit point, drag the cursor to the clip and direction I want to trim but it doesn't work. pop-up says collision on V-1. Same thing when I double-click the clip to player and try to move the edit point on the scrub bar. This was functional in prior sessions. What's happening? Thx in advance.

    I'm only using one (V1) track. Prior to this problem I was unable to insert edit. That problem mysteriously vanished after an unsuccessful phone support session w/ Apple failed to solve. Also when I try to insert w/transition (default cross-dissolve) the transition is applied to the opposite edit point,ie: out point of insert clip has transition instead of in point where it was applied. When I try to add transition to edit point (CMD-T) it doesn't work.
    I'm slowly working around the ripple edit malfunction by using the razor tool and ripple delete (shift-delete) to trim in the timeline.

  • Saved Shopping Cart Display/Edit functions are not working

    Hello SRM experts,
    The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
    We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
    Thanks,
    Mani

    Hi Mani,
    We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
    Can you shed some light on any other config that you changed?
    Regards,
    Nikhil

  • Why Strict validation is not working

    Hi,
    Why the Strict validation is not working in the XMLDB. I validated successfully the same file from XML Spy. The error in Oracle is:
    begin
    for x in (select warehouse_spec from xml_validate where warehouse_id=51) loop
    x.warehouse_spec.schemaValidate();
    end loop;
    end;
    ORA-31154: invalid XML document
    ORA-19202: Error occurred in XML processing
    LSX-00011: internal error: LsxvPushCandidate array overflow
    ORA-06512: at "SYS.XMLTYPE", line 345
    ORA-06512: at line 3
    Thanks in advance
    Rizly

    The error is LSX-00011: internal error: LsxvPushCandidate array overflow
    This might be helpfull
    Error in STRICT Validation
    Regards,
    Remy

  • Publishing HTML(Page content) field required field validation is not working

    The required field validation is not working on Site Column of type "Full HTML content with formatting and constraints for publishing". I found a link i.e.
    https://social.msdn.microsoft.com/Forums/office/en-US/7b544aae-2562-4b8e-8e5b-36a1d47a4d14/publishing-htmlpage-content-field-required-field-validation-is-not-working?forum=sharepointdevelopment
    which tells this is a hot fix in July 2014 CU . Can anyone help me with what all Fixes are there in July 2014 CU. So that I can update only if it required!
    Or any other alternative where I can use the required field validator on "Full HTML content with formatting and constraints for publishing" column type?

    You could add a scripteditor webpart on the newform.aspx page and add client side validation using jQuery.
    $(document).ready(function()
     var fname = document.getElementById('fname').val();
     var lname = document.getElementById('lname').val();
     var age = document.getElementById('age').val();
     /*Do not know how to get element by class and that too, two different type. Have to check if user chose anything or not*/
      $("#submit").click(function()
       if(fname.length === 0)
        alert("Please input a first name");
       else if(lname.length === 0)
        alert("Please input a last name");
       else if(age.length === 0)
        alert("Please input an age");

  • In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac? No

    In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac?
    Marquees not showing, works perfectly fine on PC IE 9.
    Can edit text put cannot duplicate regions?
    Can anyone advise? Not good if the client worjs on Mac.

    Marquees the HTML tag? It's the most hated HTML tag out there, most browsers removed it because it was such a pain to see in 1996 scrolling images and scrolling everything

  • Edit-in-place NOT working...

    I've recently installed FCS at our small shop. I've read the Geller book, followed the Admin manual, and pretty much have gotten it to work.
    However, I can't get "edit in place" to work. It did work when I initially installed the system and tested it. And now, after a complete re-install, it doesn't work.
    I am using two local RAIDs. Each have a media directory that I set up as a device. For example:
    One device is called "Mojo Project Media 02"
    In the Device Pane (on the Admin / Client Java Interface) the Local Directory reads:
    "/Volumes/RAID_02/Mojo Project Media 02"
    So the Mac edit-in-place URI reads:
    "file://localhost/Volumes/RAID_02/Mojo Project Media 02"
    I can't get the edit in place URI to not ad "localhost" but I don't think this should matter.
    Whenever I try to move media into a Browser Window from FCS, it tells me I must copy it to my local cache first. This didn't happen when I first installed/configured the system.
    Can you not set up edit-in-place for a local directory (ie. a volume locally attached to the server with FCS installed)?
    I know it worked before. Is there something I am missing?

    Thanks A. Richards.
    After much testing, I realized that on the FCSr machine that it indeed had edit-in-place status because of the storage directly attached to it. BUT the other client computers did not.
    So basically, since we don't have the $1000 a seat for XSAN and we are only cutting DV and DVCPRO HD...
    We could configure our Mac Pro Server to be an AFP share over the network; it's plenty fast over Ethernet since it's aggregated over 6 gigabit ports to a switch and has PCIe RAID storage attached. We could give this edit-in-place status IF...
    We used another machine (server class) to install FCSr on.
    This would work right?

  • Validation sequencing not working

    hi
    I have found that my item level validations on a page are not working as I expected. I validate a field (P74_change_id) to 'must be numeric', then I have another validation with a much higher sequence number that checks whether the value already exists in the database, but this is causing an error if the value if not numeric. The following text is taken from my debug mode, what surprises me is the second line that clearly states the first 'not numeric' validation is functioning correctly and returning a fail, but it still carries on with the other validations.
    0.28: ...Item is numeric validation: P74_CHANGE_ID
    *0.28: ...Validation did NOT pass*
    0.28: ...Item Not Null or zero Validation: P74_CHANGE_ID
    0.28: ...Item Not Null Validation: P74_RAISED_DATE
    0.29: ...Item is date validation: P74_RAISED_DATE
    *0.29: ...Validation did NOT pass*
    0.29: ...Item Not Null Validation: P74_APPROVED
    0.29: ...Item Not Null Validation: P74_TYPE
    0.29: ...Item is date validation: P74_APPROVED_DATE
    0.30: ...Exists Validation: type="NOT_EXISTS" select * from budget_ct_header where (change_ID = :P74_change_Id) and (change_ID_rev = :P74_change_id_rev) and (project = :P74_project) and (type = :P74_TYPE)
    0.30: Show ERROR page...
    I get a 'ORA-01722: invalid number' and 'Error ERR-1006 Error in validation routine' referring to 'Exists Validation: type="NOT_EXISTS" select * from' etc the on the page below the debug.
    Any ideas/thoughts??
    Thanks
    -Marc

    Marc
    Apex will check all validations before the error page - hence the 'X errors have occured' message. This is a good thing, there's nothing worse for a user to get an error, fix it, re-submit the page only to get another error etc etc.
    Looks like you need to check you NOT EXISTS validation so make all the other validation conditional never and then get that one working.
    I think the problem is probably with one of the bind variable predicates where you reference the page items. Have you tried wrapping them in TO_NUMBER() where appropriate?
    By the way you don't need brackets round your predicates in the WHERE clause of your not exists query.
    Let me know if you need further help.
    Cheers
    Ben
    Sorry forgot to mention that your ORA error seems to relate to your NOT EXISTS query - not your IS NUMERIC validations
    Edited by: Munky on Apr 8, 2009 11:37 AM

  • Hans Javaserver 3 book example not working

    Hello,
    This is from Hans Javaserver Pages Third edition
    <%-- Verify that the user is logged in --%>
    <c:if test="${validUser == null}">
    <jsp:forward page="login.jsp">
    <jsp:param name="origURL" value="${pageContext.request.requestURL}" />
    <jsp:param name="errorMsg" value="log in first." />
    </jsp:forward>
    </c:if>
    The above example does not seem to work.
    The code below seems to work
    <%-- Verify that the user is logged in --%>
    <c:if test="${validUser.name == null}">
    <jsp:forward page="login.jsp">
    <jsp:param name="origURL" value="${pageContext.request.requestURL}" />
    <jsp:param name="errorMsg" value="log in first." />
    </jsp:forward>
    </c:if>
    Any ideas why his example is not working on Tomcat 5.0?
    Thanks
    Frank

    Hi I was trying the same thing and was wondering why it doesn't accept the origURL, well it never takes the value of it at all and just skips the page that was requested and goes to mail.jsp no matter what.
    <c:choose>
    <c:when test="${! empty param.origURL}" >
    <c:redirect url="${param.origURL}" />
    </c:when>
    <c:otherwise>
    <c:redirect url="main.jsp" />
    </c:otherwise>
    </c:choose>
    The value of origURL is never passed to this authentication page! I would also like to know the reason why?
    Also I have a question to your last piece of code that works: where is the name parameter taken from? Is it the same as userName that is passed as a parameter from the login page? or is it something else? I'd really appreciate your help...
    <c:if test="${validUser.name == null}">

  • Validation is not working for F-28 and F-53

    Hi,
    I wrote a validation for Transaction Code F-28 and F-53 and F-44 and F-54. But it is not working. Kindly help me where i went wrong. please do the needful.
    Pre-Requisite : Company Code and Transaction Code
    Check : Business Area 4000
    Requirement is - In the above transaction if i give the other business area like 3000, system should throw error. System should only accept the Business Area 4000
    But i am not able to succeed to full fill the requirement.. Kindly Help me
    Thanks
    Sunil

    Hi,
    Please pass some transactions using mentioned t-codes in testing server. After passing transactions please check the accounting document header for checking T-code for the same.
    Use that t-code for validations . also check whether Validation - call p point is activated or not in t-code OB28
    Rgds,
    Saurabh

  • Edit in Photoshop not working

    Edit in Photoshop seems to have stopped working for me, both Edit and Open as Smart Object do not work.  Photoshop starts but the file never opens.  I'm using Lightroom 5.5, Camera Raw 8.3 and Photoshop CS6.  I can of course export to a PS doc and open that.

    I think the reason for this "edit-Problem" lies in the fact that you don't use PS CS5.
    LR 3 does not work seamlessly with earlier versions of PS - I have worked with LR 3 and CS3 and some things worked and some didn't.
    Since I have upgraded to CS 5, all is well.
    WW
    PS: In case you wondered, I don't get a commission if you buy CS5.
    Message was edited by: web-weaver

  • LR2 and PS4 - merging to HDR, merge to Panaorama and Edit in Layers not working

    Hi,
    I've recently upgraded from LR to LR2.1 and Photoshop CS to CS4. I've been trying to multi-select images from LR2 and edit them as HDR and Panoramas using the "Edit in->" merging options.
    None of them seem to work. I can see PS CS4 being opened, but then nothing happens. No image is opened or dialog box shown anywhere. Closing PS doesn't prompt for any saving, etc.
    I think the problem is because my RAW/DNG files are stored on a NAS. Trying to do the merge from PS directly using the files also doesn't work. But if I copy the files to my local HDD, then things work a lot better.
    Is this a known issue with CS4?
    iMac, OSX Leopard, 4Gb RAM.

    I have done some more tests:
    Setting up CS3 as "Additional External Editor" in LR2.1 Edit/Preferences/External Editing works fine with RAW ( .NEF ) files on NAS-drive.
    Also CS4 as "Additional External Editor" works the same way. The procedure is the same as when CS3 was the standard editor, ie exporting a TIFF file from LR2.1.
    The difference is that the standard CS4 integration is not writing TIFF files från LR, but has a more tight integration to CS4, which is much faster. But still not working when RAW files are on NAS. ( LR catalog files are on local disk ).
    Configuration:
    Dell dimension 9200
    Windows Vista Home Premium ( 32-bit )
    D-link DNS-323 NTFS file system
    Lightroom 2.1
    Photoshop CS4 Extended
    Latest updates installed.

  • Photo Edit in CS4 not working

    Hello,
    THE SETUP
    I have LR 3.3 and PS CS 4 Version 11.0.2 on a Mac running OS X.6.7.
    My "About Lightroom" screen reports the presence of Camera Raw 6.3.
    In my LR preferences under "External Editing" tab, I have the option to "Edit in Adobe Photoshop CS4" as PSD / sRGB / 16 bit / rez 300. There is no "Additional External Editor" present.
    I have installed in Library/Application Support/Adobe/Plug-Ins/CS4/File Formats the Camera Raw Plug-in version 5.7. When I choose Photoshop>About Plugin>Camera Raw I see that CR version 5.7.0.213 is present.
    THE PROBLEM
    When I select photo(s) [CR2 file(s)] in LR3 and choose Photo>Edit in> none of the external edit-in-Photoshop options work. First, I get a message saying "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.3 for full compatibility."
    I resent this suggestion, since that version of Camera Raw only works with CS5.
    When I click "Open Anyway," PS opens and loads, but that's it. None of the images from LR appear.
    I get the same (non)-results with all of the options (edit in CS4, HDR, panorama, smart object, etc.) under "Photo>Edit In." Photoshop launches, but no image appears.
    The only way I can get a photo to open in PS from within LR is to choose Photo>Edit in>Edit in Adobe Photoshop CS4, and then when the warning dialog comes up about the Camera Raw plug-in version, click "Render in Lightroom." When I do that, LR renders the image and it opens in CS4. But that doesn't help me do what I really want to do, which is to select bracketed exposures in LR, merge them to HDR in CS4, and save them back to LR.
    I have searched for help on this and come up dry. I did find this http://www.lightroomforums.net/showthread.php?9974-Open-as-layers-in-Photoshop-command-not -working, but I reinstalled the CR 5.7 plug-in as described and saw no change.
    Any suggestions appreciated. Thanks in advance.
    Message was edited by: GeorgTrakl

    Lr 3.3 and CS4 are not fully compatible so your experience is the result of that.
    You will have to bite the bullet and upgrade to CS5 if you dont want to "Render in LR".
    I've worked for quite a while with LR 3 and CS3 and experienced similar problems - the only way out is that you select "Render in LR".
    It's not such a big deal. When you select "Render in LR", Lr creates the psd that then opens in CS4.
    With CS5 it works this way: The RAW file opens in CS5 but when you save in CS5 a psd is generated.
    WW

  • HelloWorld Example Not Working

    Hi,
    I am using JCDK 2.2.2.
    Converter and scriptgen run without errors from C:\java_card_kit-2_2_2-windows\java_card_kit-2_2_2\samples (which is the existing samples directory):
    converter -classdir "C:\java_card_kit-2_2_2-windows\java_card_kit-2_2_2\samples\classes" -exportpath "C:\java_card_kit-2_2_2-windows\java_card_kit-2_2_2\api_export_files\;C:\java_card_kit-2_2_2-windows\java_card_kit-2_2_2\samples\classes\com\sun\javacard\samples\HelloWorld\javacard" -applet  0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1 com.sun.javacard.samples.HelloWorld.HelloWorld com.sun.javacard.samples.HelloWorld 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
    scriptgen -o HelloWorld.scr ./classes/com/sun/javacard/samples/HelloWorld/javacard/HelloWorld.capI run cref from C:\java_card_kit-2_2_2-windows\java_card_kit-2_2_2\bin:
    cref.exe -o HelloWorld.eepromAnd then in another command prompt from C:\java_card_kit-2_2_2-windows\java_card_kit-2_2_2\bin:
    apdutool C:\java_card_kit-2_2_2-windows\java_card_kit-2_2_2\samples\HelloWorld.scrThe app installs fine. So now I want to test the code. I added a line to the script at the end to selecct the application:
    // Select HelloWorld
    0x00 0xA4 0x04 0x00 0x09 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x1 0x7F;Which is not working (6d00 error)
    Any suggestions why this could be happening? Nothing throws errors except the line to select the app. It can't be a problem with the code, because I am running the sample files that came with the JCDK.
    P.S. I tried 'creating Helloworld' using the line
    0x80 0xB8 0x00 0x00 0x0b 0x09 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x1 0x00 0x7F;But this gave a 6443 error.
    Edited by: Candice on Jul 11, 2011 2:14 AM

    P.S. I tried 'creating Helloworld' using the line
    0x80 0xB8 0x00 0x00 0x0b 0x09 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x1 0x00 0x7F;But this gave a 6443 error.Applet not found for installation.
    • Cause: An attempt was made to create an applet instance, but the applet code was not installed on the card.
    • Solution: Verify that the applet package has been downloaded to the card.
    Remeber that after the first time you launch cref, you need to tell it where to load the EEPROM file from the last run with -i <file>. You can use the same file for -i and -o to be able to reuse the mask and store new state.
    Cheers,
    Shane

Maybe you are looking for