Orphan partition is created based on the login id

Hi all,
Application has both transparent and replicated partitions. Issue which I encounter is as below:
Login using admin id ---> No orphan partition created and the partitions are located in their respective source and target DBs
Login using user("xyz") id ---> all the partitions are located under orphan partition.
Note:"xyz" id has admin access
Kindly enlighten.
Thanks!

Mert,
Nathanael's suggestion should work. And you can also do the following, and events will be read only once from EventHub.
With AllEvent AS (
SELECT * FROM inputstream
SELECT * INTO ProdTable from AllEvent WHERE TableName = "ProdTable"
SELECT * INTO INTTable from AllEvent WHERE TableName = "INTTable"
SELECT * INTO StableTable from AllEvent WHERE TableName = "StableTable"

Similar Messages

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

I want to implement three level Horizental navigation on the top navigation and menu items are created based on the data available in a SharePoint List.

Hi All,
I want to implement three level Horizental navigation on the top navigation and menu items are created based on the data available in a SharePoint List.
Implement this requirement through customization, how can i start any help
Thanks

Hello,
You can follow these links to get the result that you want. You can get the desired result either using the custom list or a site map. Please make sure when you edit the master page, dont work on the original v4.master. Always make a a copy and then work
on it.
This link will show you how get that navigation using a list.
http://www.bitsofsharepoint.com/BlogPoint/Lists/Posts/Post.aspx?ID=60
This link will show you how get that navigation using a sitemap.
http://www.sharepointdiary.com/2012/01/custom-top-navigation-using-sitemap.html
Please mark as "Answered" if this helped you.
Thanks,
norasampang

Dynamic structure creating based on the input parameter

Hi all,
How to create a dynamic structure based on the input parameter given in the selection screen. I have a file path given and it contains three fields in common, but after that depending upon the input given the fields get changed. For example, i have 0002 infotype given in the selection screen, my file path structure should contain pernr begda endda and PS0002 structure, if the infotype is changed the PS structure has to be changed dynamcially.
Thank you,
Usha.

Ans

Dynamically changing the select list in an LOV based on the login user

We have a field in a form which is a combobox.The form is to be linked to different profiles of users.Based on the logged in user we would like to restrict the select list in the LOV.ie user1 should see a LOV which is different from that seen by user2.Is this possible.If so how can this be done?Kindly reply.
Thanks & Regds,
Jayanthi

Thanks for ur reply.But my problem is that i have a table having details of some products which includes spareparts also(Name,id,price etc).In my form i have the combobox field which should have a list of these products which the user can select.Now depending on the user's profile he should see only his related products(One profile of users should view only the products but not the spares while the other should view only spares.)The details of both the products and spares are in the same table.we have a criteria to differentiate between the products and the spares.The LOV should display at run time, either products or spares depending on his profile as he logs in. Hope u understood my problem.
Regds,
Jayanthi
Hello Jayanthi,
I had a similar situation in my last project.
While you can solve this by modifying your query, this will always come around as may be later some other criteria to restrict based on User/His Role/Something else. Hence I fixed it at design level itself. Though I can't give my situation I can tell you the solution applying my logic.
Altering your Product Table and adding one more database Column say Product_Category and updating the table with Product Category =1 for Products and 2 for Spares. You can extend this further for other types.
Create a new Table say User_Groups that will have
Group_id
Group_Name
User_Id columns and will contain all the User ids inserted groupwise.
Create one last Table Group_Product_Map
That will have
Group_id
Category_id
This will store each Group_Id followed by Category_id of Products to which these group members will have access to.
Now write a database function getCategory( p_User) which will query User_Groups table to get Group_Id
and further query Group_Product_Map Table based on group_id to get Category_Id.
This function will return category_id.
Huh!
So your LOV will have a query as select *(or whatever) from Product where category_id = getCategory(portal30.wwctx_api.get_user)
Hope this helps
Madhav

How to change Dashboard Tabs based upon the login?

Hi All,
I have a requirement that, based upon the user login the dashboard tabs should change! not sure how to do this? any help is greatly appreciated.
Regards
B
Edited by: Bees on Jul 27, 2010 2:37 AM

B,
I mean assuming you have a security model, users are in groups etc. And you have one group allowed to access tab 1, and you build tab2 for another group....
The dashboard page properties screen, has a padlock icon against page, here you can set up the presentation catalogue privs for the dashboard page, assign users / groups read access, prohibit access as you see fit.
To get to the page properties, edit the dashboard itself, on the top row of icons against the page dropdown list is our friend, the pointy finger, hit this to get to the page properties screen, you can change order, rename pages and in this case, set security per page.
For discussions on the security model, RPD groups & Web cat groups - best we start another thread !! have a search on the forum first though, its been covered many times :-)
Cheers,
Alastair

Update links in file created based on the template page

Hello everyone:
a) I have problems when update links in files crated based on
a template page.
I read Dreamwaver (DW) help menu. Seems to me Dreamwaver is
smart enough to update links based on correct file structure.
I created a template file based on a sample page. Template
file saved to the template folder. Then I crated few pages based on
the template. I checked links in new files and found that link
structures are based on template folder, not based on files current
folder position.
Please give me some suggestions on how to correct this
problem. If you know some good online tutorial or documentations
please share with me.
b) Can DW template update Navigation bar links correctly
based on relative document path?
I have Navbars imported from Fireworks into DW. Files crated
based on template are not updating pop-up menu links correctly. I
manually updated every links. It is time consuming and

> I created a template file based on a sample page.
Template file saved to
> the
> template folder. Then I crated few pages based on the
template. I checked
> links
> in new files and found that link structures are based on
template folder,
> not
> based on files current folder position.
This means that you are entering the links manually, not
using the Property
inspector and browsing to the target file. You should do it
this way until
you understand how templates work. All links in a template
file should
(usually) be one of three kinds -
1. Document relative BASED ON THE TEMPLATE, e.g.,
<a href="../whatever....
2. Root relative, e.g.,
<a href="/whatever....
3. Absolute, e.g.,
<a href=''
http://www.example.com/whatever....
Anything else will always result in the Template folder being
placed in the
path for the link when you create a child page.
> b) Can DW template update Navigation bar links correctly
based on relative
> document path?
Yes, of course.
> I have Navbars imported from Fireworks into DW.
This could easily be one of your problems. Those menus are
definitely
broken and should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"sjmacro" <[email protected]> wrote in
message
news:[email protected]...
> Hello everyone:
>
> a) I have problems when update links in files crated
based on a template
> page.
>
> I read Dreamwaver (DW) help menu. Seems to me Dreamwaver
is smart enough
> to
> update links based on correct file structure.
>
> I created a template file based on a sample page.
Template file saved to
> the
> template folder. Then I crated few pages based on the
template. I checked
> links
> in new files and found that link structures are based on
template folder,
> not
> based on files current folder position.
>
> Please give me some suggestions on how to correct this
problem. If you
> know
> some good online tutorial or documentations please share
with me.
>
> b) Can DW template update Navigation bar links correctly
based on relative
> document path?
> I have Navbars imported from Fireworks into DW. Files
crated based on
> template are not updating pop-up menu links correctly. I
manually updated
> every
> links. It is time consuming and
>
>

Can a Hyperlink be created based on the results of a Dynamic Theme Query?

What I would like to do is create a link from the results of a dynamic theme. The following code displays the names of locations on my map, is there any way that the location name once placed on the map can be a hyperlink that will run a SQL statement that will show the status of that name. My map is based on 3 status levels identified by markers, green marker is up, red is down, amber is degraded. If the Marker is red I want to be able to click the name or the Marker that is on the map to find out what the problem actually is.
Thanks in advance!
<mv:addJDBCTheme
     name="Locations_Names"
     datasource="mvdemo"
     spatial_column="map_loc_data"
     srid="8307"
     label_style="T.CITY NAME"
     label_column="location"
     min_scale="7.05" max_scale="0">
          select l.location, l.map_loc_data
          from resources.locations_test l
          where l.location_id IN
          (Select distinct d_loc_id
          from cii.devices
          HAVING max(d_ops_status) <= 2 GROUP BY d_loc_id)
</mv:addJDBCTheme>

LJ,
Any chance you can see what is wrong with the following code. I have gone over it line by line with an example out of the Oracle Pro spatial Data book, but I can not see what the problem is.
I know you will not be able to run it but the error I am getting is:
500 Internal Server Error
java.lang.NoSuchMethodError at Oracle.lbs.mapclient.MapViewer.getUserPoint(MapViewer.java:3512)
     at oracle.lbs.mapclient.MapViewer.identify(MapViewer.java:4560)
     at oracle.lbs.mapclient.taglib.MapViewerIdentifyTag.doEndTag(MapViewerIdentifyTag.java:171)
     at tnoscmaps.MapofUS._jspService(_MapofUS.java:286)
     [SRC:/TNOSCMAPS/MapofUS.jsp:130]
To me this is pointing to the following section:
<mv:identify
id="identifyResults"
datasource="mvdemo"
table="locations_test"
spatial_column="map_loc_data"
srid="8307"
x="<%= imgCX %>"
y="<%= imgCY %>"
>
location, state
</mv:identify>
This is my complete set of code for this page:
<%@ page contentType="text/html;charset=UTF-8" %>
<%@ taglib uri="/WEB-INF/mvtaglib.tld" prefix="mv" %>
<%@ page session="true" %>
<%@ page import="oracle.lbs.mapclient.MapViewer" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>CONUS TNOSC SITES</title>
</head>
<body bgcolor="#FFFF00">
<%
// Name of this File
String jspURL = response.encodeURL(request.getRequestURI());
// URL of Mapviewer servlet
String mapViewerURL =
"http://"+ request.getServerName()+":"+request.getServerPort()+
request.getContextPath()+"/omserver";
String[][] featureInfo = null;
if( request.getParameter("session-initialized") == null ||
request.getParameter("new-session") == "true") {
%>

<mv:init
url="<%=mapViewerURL%>"
datasource="mvdemo"
id="mvHandleSimpleViewerTags" />

<mv:setParam
title="CONUS TNOSC SITES"
width="800"
height="500"/>

<mv:importBaseMap name="US_MAP"/>

<mv:addJDBCTheme
     name="Locations_Names"
     datasource="mvdemo"
     spatial_column="map_loc_data"
     srid="8307"
     label_style="T.CITY NAME"
     label_column="location"
     min_scale="7.05" max_scale="0">
          select l.location, l.map_loc_data
          from resources.locations_test l
          where l.location_id IN
          (Select distinct d_loc_id
          from cii.devices
          HAVING max(d_ops_status) <= 2 GROUP BY d_loc_id)
</mv:addJDBCTheme>
<mv:addJDBCTheme
     name="Locations_Green_Status"
     datasource="mvdemo"
     spatial_column="map_loc_data"
     srid="8307"
     render_style="M.GREEN"
     min_scale="50" max_scale="0">
SELECT l.map_loc_data, l.location_id
FROM resources.locations_test l
WHERE l.location_id IN (SELECT d_loc_id
FROM cii.devices
     GROUP BY d_loc_id HAVING MAX(d_ops_status) = 0)
</mv:addJDBCTheme>
<mv:addJDBCTheme
     name="Locations_AMBER_Status"
     datasource="mvdemo"
     spatial_column="map_loc_data"
     srid="8307"
     render_style="M.AMBER"
     min_scale="50" max_scale="0">
SELECT l.map_loc_data, l.location_id
FROM resources.locations_test l
WHERE l.location_id IN (SELECT d_loc_id
FROM cii.devices
     GROUP BY d_loc_id HAVING MAX(d_ops_status) = 1)
</mv:addJDBCTheme>
<mv:addJDBCTheme
     name="Locations_RED_Status"
     datasource="mvdemo"
     spatial_column="map_loc_data"
     srid="8307"
     render_style="M.RED"
     min_scale="50" max_scale="0">
SELECT l.map_loc_data, l.location_id
FROM resources.locations_test l
WHERE l.location_id IN (SELECT d_loc_id
FROM cii.devices
     GROUP BY d_loc_id HAVING MAX(d_ops_status) = 2)
</mv:addJDBCTheme>

<mv:setParam
centerX="-96.0"
centerY="39.0"
size="37" />
<%
MapViewer mvHandle = (MapViewer) session.getAttribute("mvHandleSimpleViewerTags");
String userAction = request.getParameter("userAction");
String imgCX = request.getParameter("userClick.x");
String imgCY = request.getParameter("userClick.y");
if("identify".equals(userAction)) {
%>
<mv:identify
id="identifyResults"
datasource="mvdemo"
table="locations_test"
spatial_column="map_loc_data"
srid="8307"
x="<%= imgCX %>"
y="<%= imgCY %>"
>
location, state
</mv:identify>
<%
featureInfo = identifyResults;
else {
%>
<mv:run
action="<%=userAction%>"
x="<%= imgCX %>"
y="<%= imgCY %>" />
<%
%>

<center><h1>CONUS TNOSC SITES</h1></center>
<form name="viewerForm" method="post" action="<%= jspURL %>" >
<center>
<table border="0" cellpadding="0" cellspacing="0" bgcolor="#FFFFFF" >
<tr bgcolor="#FFFFFF">
<td valign="top">
<table border="0" cellpadding="0" cellspacing="0">

<tr>
<td valign="top" align="center" >
<input type="image"
border="1"
src="<mv:getMapURL />"
name="userClick"
alt="Click on the map for selected action"
>
</td>
</tr>

<tr>
<td align="center">
<input type="radio" name="userAction" value="recenter"
<%= "recenter".equals(userAction)?"checked":""%> ><B>Re-center</B>
<input type="radio" name="userAction" value="zoomin"
<%= "zoomin".equals(userAction)?"checked":""%> ><B>Zoom In</B>
<input type="radio" name="userAction" value="zoomout"
<%= "zoomout".equals(userAction)?"checked":""%> ><B>Zoom Out</B>
<input type="radio" name="userAction" value="identify"
<%= "identify".equals(userAction)?"checked":""%> ><B>Identify Issue</B>
</td>
</tr>
</table>
</td>
</tr>

<tr>
<td align="center">
<i>Center</i>[<b><%=mvHandle.getRequestCenter().getX()+","+
mvHandle.getRequestCenter().getY()%></b>]
<i>Scale</i>[<b><%=mvHandle.getMapScale()%></b>]
</td>
</tr>

<% if (featureInfo !=null && featureInfo.length>0) {%>
<tr><td align="center">
<table border="1">
<% for (int i=0; i<featureInfo.length; i++) {%>
<tr>
<% String[] row = featureInfo;
for (int k=0; k<row.length; k++) {%>
<td><%= row[k] %></td>
<% } %>
</tr>
<% } %>
</table>
</td></tr>
<% } %>
</table>
</center>
<input type="hidden" name="session-initialized" value="true" >
</form>
</body>
</html>

Invoice to be created based on the sales order materials

Hi,
I have created the Sales order for 10 different materials and i created 2 deliveries for this sales order.
Now i want to create 10 Invoices for each product?
How can i process?
Regards
M. Lakshmi Narasimhan

Hi,
you can use Invoice Split functionality. Here, you can prepare your own split routine.
I suggest you read documentation on this: http://help.sap.com/saphelp_erp2004/helpdata/en/4a/ac853478616434e10000009b38f83b/frameset.htm
and read other posts on the subject: SD Invoice Split.
Hope it helps,
regards,
w.

Creating Delivery based on the Inbound IDOC received.

Hi all,
I have a requirement where in, Outbound Delivery for Sales order is to be created based on the inbound IDOC received from a third party. The standard idoc type DELIVERY03, requires the Delivery Number for updating the order but it cannot create a delivery number.
Can any one suggest which IDOC type can be used for this or if there is any alternative solution?

Hi,
You can use FM IDOC_INBOUND_WRITE_TO_DB to create an inbound IDoc.
CALL FUNCTION 'IDOC_INBOUND_WRITE_TO_DB'
    EXPORTING
      PI_STATUS_MESSAGE       = I_EDIDS
    IMPORTING
      PE_IDOC_NUMBER          = DOCNUM
      PE_STATE_OF_PROCESSING = STPROC
      PE_INBOUND_PROCESS_DATA = I_TEDE2
    TABLES
      T_DATA_RECORDS          = I_EDIDD
    CHANGING
      PC_CONTROL_RECORD       = I_EDIDC
    EXCEPTIONS
      IDOC_NOT_SAVED          = 1
      OTHERS                  = 2.
Check the following link:
http://www.sapbrain.com/TUTORIALS/TECHNICAL/IDOC_tutorial.html
<b>Reward points</b>
Regards

Material Valuated based on the % content

Hi experts,
I have a business scenario where I buy a raw material from a vendor which will be managed in batches.
When goods receipt is made accounting documents are created based on the active component (in %) available in the batch.
For e.g.: if the batch is 100% pure, then the GR is made at the PO price.
if the batch is 50% pure, then the GR is made at half the PO price.
I have created class and characteristics and attached to the material.
But when I make a GR I am getting an error "No proportion valuations exist for material XXX in valuation area XXX".
Expecting Ur guidance,
Adhi.

Hi
In class have you maintained organizational area "S"?. And there are many check points you need to check.
See the below link. it will help you
http://help.sap.com/saphelp_46c/helpdata/en/dd/6a5c580f6011d383720000e8a5eb64/content.htm
Regards
Antony

UDF for Splitting the nodes based on the field length

HI All,
Target records Record1 to Record4 must be created based on the length of the source field length i.e, if the source field length is only 90 then only 3 records must be created.maximum length of the source field is 120.The source and the target structure are as shown
Source                                  Target
Record                                Record(30)
      Field(120)    ------------->          Field1(10)
                                                 Field2(10)
                                                 Field3(10)
After mapping:-
        Source         ----------->        Target
Record                                Record1(0 to30)
      Field(120)    ------------->          Field1(0 to 10)
                                                 Field2(10 to 20)
                                                 Field3(20 to 30)
                                           Record2(30 to 60)
                        ------------->          Field1(30 to 40)
                                                 Field2(40 to 50)
                                                 Field3(50 to 60)
                                           Record3(60 to 90)
                        ------------->          Field1(60 to 70)
                                                 Field2(70 to 80)
                                                 Field3( 80 to 90)
                                           Record3(90 to 120)
                        ------------->          Field1(90 to 100)
                                                 Field2(100 to 110)
                                                 Field3(110 to 120)
Can any one provide me the code to get this done.
Thanks ,
Vikram

You need no UDF. You can use the substring function, but you should check the length of the string to prevent mapping errors due to the substring function.

Range Partitioning a table based on day of the week

I have a logging table which i want to partition into 7 partition, each one for the day of the week, eg MON,TUE, WED. I am aware and I can do a list partition by creating a parition key which stores 'DY' of the week and this means that I need to add another column to the existing table.
I wanted to explore the option of creating a range parition based on the timestamp column that already exists. Can anyone let me know if this option is possible?
Example
create table test_partition
( log_id number,
log_date TIMESTAMP(6),
log_value varchar2(100)
PARTITION BY RANGE (log_date)
PARTITION p1_mon VALUES LESS THAN (), ---- Not sure what can be used here to create this parition.
PARTITION p2_tue VALUES LESS THAN (),
PARTITION p3_wed VALUES LESS THAN (),
PARTITION p4_thu VALUES LESS THAN (),
PARTITION p5_fri VALUES LESS THAN (),
PARTITION p6_sat VALUES LESS THAN (),
PARTITION p7_sun VALUES LESS THAN ()
Any oracle guru with some suggestion for this would be highly appreciated..
Cheers,
VJ

Something like:
PARTITION P1_MON VALUES LESS THAN (TIMESTAMP'2009-03-10 00:00:00')
....Bear in mind that you will have to write a procedure to drop and create your daily partitions, and run that on a daily basis. Also you would be well advised to create a catchall partition that holds anything that won't go into your latest specified partition, eg:
PARTITION P_MAX VALUES LESS THAN (MAXVALUE)

How to seperate the accounts based on user login?

I'm creating a system where I have a public page that is to be displayed for all the users then in the login box the user can login and then he will get his session. The problem I'm facing is that after I login from the public page I still get the page that is gurantee to public. how can I login directly to user1 account ??

Hi
Do you know how Portals 'Default user group' works?
This construct could be your solution if the number of users isn't too high or the users can be grouped easily.
Otherwise you could work with a menu hierarchy based on individual user privileges.
Follow my answer to such a topic in this link to see how it works:
hiding menu items if the user does not have the privs
A combination of these two suggestions would probably be the best.
Hope this helps.
Thanks
Peter

I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created.

I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Orphan partition is created based on the login id

Similar Messages

Maybe you are looking for