OSB process WS-security header problem! Pls help

Hi All
We have protected all our osb proxy services with username token policy. The problem we are facing is that in some of the proxy services we want this header to be available within the message flow (for auditing purposes) but the process WS-security header option when selected removes this header before it enters the message flow.
If we untick this option, it does not authenticate the incoming soap request and proxy services is invoked even if wrong or no credentials are supplied.
Is there a way we can select this option for authentication and still have the username token intact within the soap header in the message flow. please help. Thanks

Please check the content of $inbound at runtime (with process WS-security header option enabled). You may get all the information for auditing purpose from that variable.
Regards,
Anuj

Similar Messages

  • Enable / Disable Process WS-Security Header in SOA Suite 11g

    Hello,
    how can I check the WS-Security Header without authenticate the username? In OSB is a flag "Process WS-Security Header", when I switch it off, the OSB only check the security context and did not check the correct authentication.
    I didn't find a configuration in WebService Security Configuration. Is there a configuration to disable the authentifacation-module?
    KInd regards
    Marcel

    I have the same issue, I need to get the X.509 certificate from the security header but OSB removes them uppon authentication. So I cannot retrieve them !

  • Urgent: Sessions problem pls help me

    Hi all,
    Its already late to post this problem.pls help me urgently.
    I have a servlet & two jsp's. first i request servlet, it processes something and forwards request to my first jsp. In that jsp on a button click, i'm displaying a new popup by calling showModalDialog. this dialog gets data from the same servlet but it forwards to my second jsp.(second jsp can be seen in dialog)
    Now if i submit form from my second(dialog) jsp, the servlet reports that session has expired. I tried a lot but invain. any one who helps me is appreciated well by all of our forum.
    waiting 4 u r reply,

    It could be that you have cookies turned off and you're not using URL Rewriting.
    In J2EE, the first time your browser makes a request to the server, the server responds and appends a SESSION_ID parameter to the request as well as storing a cookie with the SESSION_ID.
    The second time your browser makes a request, the server checks for the cookie. If it doesn't exist it checks for the parameter. If neither exist the server assumes its the first time your browser has made a request and behaves as describe in the previous paragraph.
    In your case when you submit the form if you have disabled cookies and the action attribute doesn't have the SESSION_ID paramter appended to the url, the browser will assume it's a first request. The user will not be logged in, hence your session has expired error.
    To fix this you need to encode the URL in your JSP. You can use the struts html:rewrite tag or the HttpServletReponse.encodeURL method, or if you're using JSP 2.0 the JSTL c:url tag.

  • Boot problem == pls HELP

    I have use the utility disk and format the machintos drive , and use  Extended (Journaled , Encrypted) , it ask me for a password (typed the password, confirmed the password - done) ,  after that i tried to install a fresh copy of Lion (i waited to be downloded from apple.com - done) after that it said that the fresh copy it will be installed and it will reboot by itself -> done ... from here the problem it's starting .... now my macbook air , it dosent start anymore it keep showming me, instaid of the apple sign from the start , a sign like the one from ghost busters (but without the ghost in it ) , i have tried to boot from cd , from usb , nothing dosent seams to be working.
    If anyone know a solution to this problem, pls HELP! Thank you in advance...
    p.s. before i had 2 hard drives that show up when i press the ALT button (machintos hd and utility drive, or something like that) now.. the only thing that it's showing me is : mac os base system , and if i try to use partition magic or something else, from a usb, it will tell me something about a bootguard , but i don't know how to insert the password.

    Glad your issue is fixed. Thanks for the update!
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • How to create Short Lived process?..can neone pls help...

    How to create Short Lived process?..can neone pls help...

    Hi,
    Login into workbench. Click on Help->Workbench start page.
    Lot of helps are there you can go through them. They will be helpful.
    But it seems you are new to livecycle, so it will difficult to start through help. Either you can take help of any of your team member who is expert in livecycle or some training you should attend.
    Thanks

  • How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

    How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

    I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
    So far the problem with the 64 bit side of it is still to be resolved.
    Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
    Craig

  • SAML Validation Error  - Proxy Service - Process WS-Security Header

    I am testing a Proxy Service that inspects the WS-Security Header which contains a WS-Policy for a SAML Assertion sender-vouches. The SAML Assertion that is produced is valid according to the oassis schema, but ALSB 2.6 returns a SOAP Fault that the SAML Assertion is not valid. Is there any next steps I should take to diagnose the problem? Also, are there any good tools available for validating a SAML Assertion?
    Here is the response of the ALSB 2.6 running on WebLogic 9.2. It is a simple proxy service we use to test whether SAML is working correctly or not. The client correctly sends the sender-voucher with the username/password/certificate alias and so forth.
    <soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
    <soapenv:Body>
    <soapenv:Fault
    xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <axis2ns1:Code xmlns:axis2ns1="http://www.w3.org/2003/05/soap-envelope">
    <axis2ns1:Value>soapenv:Sender</axis2ns1:Value>
    <axis2ns1:Subcode>
    <axis2ns1:Value>wsse:InvalidSecurityToken</axis2ns1:Value>
    </axis2ns1:Subcode>
    </axis2ns1:Code>
    <axis2ns2:Reason xmlns:axis2ns2="http://www.w3.org/2003/05/soap-envelope">
    <axis2ns2:Text xml:lang="en-US"
    >Security token failed to validate. weblogic.xml.crypto.wss.SecurityTokenValidateResult@563c52a[status: false][msg The SAML token is not valid.]</axis2ns2:Text>
    </axis2ns2:Reason>
    </soapenv:Fault>
    </soapenv:Body>
    </soapenv:Envelope>
    Thanks,
    Jay Blanton

    Hi, Pls send your client code to my mail [email protected]

  • Help me out  to resolve a conditional problem----pls help

    Hi Experts ,
    I have the requirement in which if the apinumber is greater than or equal to 10 then only the rows should get inserted into the well_header_table from products_mv table.I need to use only merge concept and nothing else.
    I am making use of the merge concept here .I am checking for the 10 digit condition during the updation part but same will be inserted into the well header table.This shouldnt happen .Can any one suggest me how can i filter out the insertion part so that it only inserts the rows which has api_number greater than 10 digits.I have marked my 10 digit condition that checks for the update part in bold form.
    Pls help me out in resolving this issue .
    regards
    debashis
    [\n]
    CREATE or REPLACE PROCEDURE NAG.MERGE AS
    BEGIN
    merge into NAG.Well_Header_Table
    using nag.products_mv
    on (SUBSTR(nag.products_mv.API_NUM,0,10) = SUBSTR(NAG.Well_Header_Table.API_NUMBER,0,10) )
    WHEN MATCHED THEN UPDATE SET
    NAG.Well_Header_Table.WELL_NAME = nags.products_mv.WELL_NAME where nag.products_mv.API_NUM >= 999999999
    WHEN NOT MATCHED THEN INSERT (NAG.Well_Header_Table.API_NUMBER,NAG.Well_Header_Table.WELL_NAME,NAG.Well_Header_Table.SECTION,NAG.Well_Header_Table.TOWNSHIP,NAG.Well_Header_Table.RANGE,NAG.Well_Header_Table.WELL_METER_NUMBER,NAG.Well_Header_Table.COUNTY_NAME,NAG.Well_Header_Table.OPERATOR_NAME,NAG.Well_Header_Table.PRODUCTION_FORMATION,NAG.Well_Header_Table.STATE_NAME,NAG.Well_Header_Table.FIELD_NAME,NAG.Well_Header_Table.WELL_FLAC_NUMBER,NAG.Well_Header_Table.WELL_LEASE_FLAC,NAG.Well_Header_Table.WELL_TYPE,NAG.Well_Header_Table.WELLBORE_PROFILE,NAG.Well_Header_Table.STATUS)
    values (nag.products_mv.API_NUM,upper(nag.products_mv.WELL_NAME),nag.products_mv.SECTION,nag.products_mv.TOWNSHIP,nag.products_mv.RANGE,nag.products_mv.METER_NUMBER,upper(nag.products_mv.COUNTY_NAME),upper(nag.products_mv.OPERATOR),upper(nag.products_mv.PROD_ZONE),upper(nag.products_mv.STATE_NAME),upper(nag.products_mv.FIELD),nag.products_mv.WELL_FLAC_HZ,nag.products_mv.LEASE_FLAC,upper(nag.products_mv.WELL_TYPE),upper(nag.products_mv.WELLBORE_PROFILE),null);
    END;
    [n]
    regards
    Debashis

    Try those selects below and look at your on condition
    select substr('123456789',1,10) from dual
    select 123456789 from dual where 123456789 > 999999999
    -- perhaps
    on (nag.products_mv.API_NUM = NAG.Well_Header_Table.API_NUMBER and nag.products_mv.API_NUM > 999999999)Regards
    Etbin

  • File to File Scenario with Secure Connection. Pls help urgent

    Hello All,
    I tried a lot to get a link/blog that expalin full scenario
    for File to File Scenario with Secure Connection
    Kindly let me know if somebody have link/doc for it
    that describe all the steps to do configuring this scenario.
    What is difference in simple words between
    FTPS and SFTP.
    Pls help it is urgent as I require for Project work urgently.
    Regards

    hi rich
    go through these links
    FTPs connection failed - error ".. certificate rejected by ChainVerifier"
    Re: What is SFTP, FTI channels
    http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
    FTPS implementation question.
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
    Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
    /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
    File adapter
    thanks
    Kunaal

  • Import problem,pls help!

    Hi,there,
    I'm new guy here,I'v got a problem about Import in table mode,I found I can import back all records successfully, but it just appends all records into the orignal table,not overwrite
    it,for example, I made a export for a table with 2 records, after then I added some records into that table,
    finally I made an import for that table, I found the
    total of records is not recovered to 2,but just append
    the records from export file,why can't I recover it to 2
    record? pls help me,thanks!

    All that import does is to run a bunch of SQL statements based on the content of the export file. If you look at the export file in an editor (if its small), or through type (on Windoze) or more on *NIX you will see stuff like:
    CREATE TABLE x STORAGE ( ...)
    INSERT INTO x col12,col2, ...
    VALUES (:b1,:b2, ...
    If you give imp the paramter ignore=Y, then the error generated by the CREATE TABLE (table already exists) will be suppressed, but the ata will be inserted. Note that there are no DROP TABLE or TRUNCATE TABLE commands in the export file.
    If you want to restore your database to a particular point in time using import, then you will need to manually drop or truncate the tables first. You can generate the required sql from the data dictionary. something like
    SET lines 1000 pages 0 feedback off trimspool on;
    SPOOL drop.sql;
    SELECT 'DROP TABLE '||table_name||';'
    FROM user_tables;
    SPOOL OFF;
    @drop.sqlHTH
    John

  • Weird Problem pls help.

    Hi guys I have a big problem that I can't figure out. See I have a PT880 Neo and on the mobo box it says it's VIA. But when I go to install the Hyperion 4 in 1 mobo drivers my system crashes. When I boot up I get a Bsod stating my graphics card is in an infinite loop and says the video driver for my card is the problem. Also when I go to install new hardware it doesn't detect it. I checked the bios and pnp is enabled. So I put a new network card in and it will only detect it in the top pci slot so is this some kind of glitch am I downloaded the right drivers? The hyperion 4 in 1's version 455vp1 pls help

    I need your full system specs + PSU specs.
    Read these guides as well >Moan Guide Power Supply Guide

  • Upgradation problem pls help

    I imported my oracle 8.1.5 database dump in oracle 8.1.7 but when I want to connect to my instance thru a client machine one error message comes as "
    problem in connecting to the database, check whether it is started or contact sys admin" whereas the database is in open state.
    Then when I connected to sqlplus at the server, it gets connected but some messages also come as below"
    ORA-06553: PLS-213: package STANDARD not accessible
    Error accessing package DBMS_APPLICATION_INFO
    ERROR:
    ORA-06553: PLS-213: package STANDARD not accessible
    Could anyone pls help..

    What is the result of
    SQL> show parameter PLSQL_V2_COMPATIBILITY
    ?

  • Serious problem. pls help !!!!!!!!!

    some "khar, khar sound is coming from below of the keyboard of my hp g6 pavillion 2231 all the time when the lapton is on. what to do. i am fed off of that noise. pls help!!!!!!!!
    This question was solved.
    View Solution.

    Hi 
         Sorry khar khar ????   Mainly any sounds from under the keyboard would be Fan or HDD either way could mean either the Fan ( if fan ) is struggling to move due to dust build up OR the hard drive is failing  ,,, It's difficult to give you a firm answer without more information . Can you tell the difference between the fan noise and a hard drive noise ?? When you start up from cold does the noise start immedietly or is it only heard after say 5-10 minutes ??????           Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Installation problem, pls help

    I am trying to install Oracle 10g on SUSE 10.0.0 but when i run the ./runInstaller command, I receive an[b] error of writting to directory /tmp/OraInstall2006-03........, Please ensure this directory is writable and at least 60MB of disk space, i have checked for space using df -h /tmp, there is enough space, i think the problem has got to do with permission because @ the moment it belongs to root user, i don't know what to do, i am a novice to unix and need to install oracle today. Pls help
    Usually the standard install of SuSE Linux should set the ownership and access rights to /tmp, if you want to give access to everyone on the system, just use this command (if owner/root access is available):
    I have used chmod o+rwx /tmp command and still having the same error. Pls somebody help
    chmod o+rwx /tmp

    Of course I assume you did correctly follow installation and configuration instructions. Did you read Oracle10g/Linux Errors and Problems from Werner Puschitz ?

  • Pls help me how to reset my security question I know my emails and password but when I purchased some apps I can't bought it cos there is a security questions so pls help cos I put some iTunes redeem card alright?

    Pls help those anyone to how to reset the security questions I know my emails addrs and password when I purchased the apps there is a additional or security question appears in the screen so pls help me apple company how to out this coz I bought new itunes redeem card I already load then after this I couldn't use it?

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

Maybe you are looking for