OSD - MDT 2013 - USMT Scan/LoadState Runs Successfully but user profiles are not restored.

I have this odd issue that I can't seem to figure out. I have an MDT Task Sequence that I created runs scanstate and loadstate without any issues using hard link. Unfortunately, the user profiles are not loaded/restored after loadstate runs. I can go to
the StateStore folder and manually run the loadstate again or use the Windows Easy transfer to restore the users, but I want this to occur when loadstate runs.
Here is the loadstate log:
2014-03-30 18:01:10, Info [0x000000] USMT Started at 2014/03/30:18:01:10.787
2014-03-30 18:01:10, Info [0x000000] Command line: C:\_SMSTaskSequence\Packages\CMP0010E\x86\loadstate.exe C:\StateStore /c /v:5 /l:C:\WINDOWS\system32\CCM\Logs\SMSTSLog\loadstate.log /progress:C:\WINDOWS\system32\CCM\Logs\SMSTSLog\loadstateprogress.log
/i:C:\_SMSTaskSequence\Packages\CMP0010E\x86\MigApp.xml /i:C:\_SMSTaskSequence\Packages\CMP0010E\x86\MigUser.xml /ue:*\* /ui:company.local\*
2014-03-30 18:01:10, Status [0x000000] Activity: 'MIGACTIVITY_COMMAND_LINE_PROCESSING'
2014-03-30 18:01:10, Info [0x000000] Script file specified: C:\_SMSTaskSequence\Packages\CMP0010E\x86\MigApp.xml[gle=0x000000cb]
2014-03-30 18:01:10, Info [0x000000] Script file specified: C:\_SMSTaskSequence\Packages\CMP0010E\x86\MigUser.xml[gle=0x000000cb]
2014-03-30 18:01:10, Info [0x000000] Replacement Manifests are processed because this OS version has built-in component manifests
2014-03-30 18:01:10, Info [0x000000] The ReplacementManifests folder used to service system component manifests is not present. OS settings migration will be done with system component manifests
installed onto the system.
2014-03-30 18:01:10, Info [0x000000] Starting the migration process[gle=0x00000006]
2014-03-30 18:01:10, Status [0x000000] Activity: 'MIGACTIVITY_MIGRATION_START'
2014-03-30 18:01:10, Info [0x000000] Excluding path: C:\_SMSTaskSequence\Packages\CMP0010E\x86
2014-03-30 18:01:10, Info [0x000000] Excluding path: C:\StateStore
2014-03-30 18:01:10, Info [0x000000] Excluding path: C:\WINDOWS\system32\CCM\Logs\SMSTSLog\loadstate.log
2014-03-30 18:01:10, Info [0x000000] Excluding path: C:\WINDOWS\system32\CCM\Logs\SMSTSLog\loadstateprogress.log
2014-03-30 18:01:10, Info [0x000000] Excluding path: C:\_SMSTaskSequence\Packages\CMP0010E\x86\MigApp.xml
2014-03-30 18:01:10, Info [0x000000] Excluding path: C:\_SMSTaskSequence\Packages\CMP0010E\x86\MigUser.xml
2014-03-30 18:02:55, Info [0x000000] Leaving MigCloseCurrentStore method
2014-03-30 18:02:55, Status [0x000000] Activity: 'MIGACTIVITY_SUCCESS'
2014-03-30 18:02:55, Info [0x000000] Success.[gle=0x00000006]
2014-03-30 18:02:55, Info [0x000000] USMT Completed at 2014/03/30:18:02:55.116[gle=0x00000006]
2014-03-30 18:02:55, Info [0x000000] Entering MigShutdown method
2014-03-30 18:02:55, Info [0x080000] COutOfProcPluginFactory::FreeSurrogateHost: Shutdown in progress.
2014-03-30 18:02:55, Info [0x0803e6] Removing mapping for HKLM
2014-03-30 18:02:55, Info [0x0803e7] Successfully unmapped HKLM
2014-03-30 18:02:55, Info [0x0803e6] Removing mapping for HKU
2014-03-30 18:02:55, Info [0x0803e7] Successfully unmapped HKU
2014-03-30 18:02:55, Info [0x080487] Destroying OS analysis service
2014-03-30 18:02:55, Info [0x080488] Destroyed OS analysis service
2014-03-30 18:02:55, Info [0x000000] Leaving MigShutdown method

I've got this to work although I haven't figured out the root cause.
My initial OSDMigrateAdditionalCaptureOptions were: /Hardlink /nocompress /uel:30 /config:%_SMSTSMDataPath%\Packages\%_OSDMigrateUsmtPackageID%\%Processor_Architecture%\config.xml"
My OSDMigrateRestoreCaptureOptions were: /Hardlink /nocompress /ue:*\* /ui:domain.local\*
Since the restore was failing, I removed the domain name from the ui switch which magically caused the restore process to load the user profiles to the computer.
My final OSDMigrateRestoreCapptureOptions which worked: /Hardlink /nocompress /ue:%computername%.
Just to note /hardlink commands are not necessary when you are using MDT task sequence, but I put it in anyway and it seems ensure that I get consistent results.

Similar Messages

Lync 2013 client is deployed but user accounts are not migrated from OCS to Lync 2013 Server - how to open Lync meetings automatically in the Lync Web Plug-in

We have in our enterprise the following scenario:
1 - Lync 2013 client is installed
2 - User accounts are not migrated to Lync 2013 Server, users are using Office Communicator as their main tool
3 - Users receive Lync 2013 meeting requests but when try to access them, Lync 2013 client launches and shows error. Users will need to open the browser and paste the URL to the address bar but this still open
4 - We cannot use the workaround of adding "?SL=1" to the Lync 2013 meeting URL as the user base is large and manual workaround is not accepted
5 - Question: is there any automated way, via egistry key or GPO setting, so that users temporarily (until their accounts are migrated to Lync 2013 server) can bypass Lync 2013 client completely and automatically open all Lync 2013 meetings
on the browser, using Lync Web Plug-in?

Thanks for the response,
First, I should have mentioned clearly that users have Office Communicator 2007 client and Lync 2013 client installed in their machines. Their accounts are not migrated yet to Lync 2013 server.
Second, we are using IE9 and IE10. The issue is that users CAN join Lync 2013 meetings with their browsers but have to paste the URL manually to browser and add "?SL=1" otherwise, if they just click at the "Join Online Meeting" or "Join
Lync Meeting" URL it launches Lync 2013 client which shows error because is not configured yet, as they are using OCS client and migrating slowly to Lync 2013 server.
Is there a Group Policy setting or a registry key from Microsoft that can be turned on to these users machines and make will all Lync meeting requests to be opened in IE browser instead of Lync 2013 client. We need a way to ignore
Lync 2013 client until user accounts are migrated to Lync 2013 Server. Manually typing URLs is not an option in a big organization, can't explain thousands of users of different levels what to do.
We are regretting the decision not to separate Lync 2013 from Office 2013 package we deployed recently. If Lync 2013 is uninstalled then all Lync meeting requests are opened in browser without an issue.

Root device mounted successfully, but /sbin/init does not exist ???

I'm having the issue where when I boot after doing a fresh install, it gives me:
ERROR: Root device mounted successfully, but /sbin/init does not exist
Bailing out, you are on your own. Good luck
sh: can't access tty; job control turned off
[rootfs /]#
My fstab:
# /etc/fstab
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1 LABEL=homerroot
UUID=877deab9-624d-4e1d-90a1-ccc1d6ebc0c6 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=homerboot
UUID=77835da5-8a38-44c1-bf27-bb657df4484b /boot ext4 rw,relatime,data=ordered 0 2
# /dev/sda3 LABEL=homeretc
UUID=8a1b5bd8-b147-41e0-87df-70a4a9e12df2 /etc ext4 rw,relatime,data=ordered 0 2
# /dev/sda4 LABEL=homervar
UUID=8eb2e7b1-cdf1-46ce-9dc1-439d002bfae4 /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda5 LABEL=homerusr
UUID=bce162b4-d27f-450c-a0e6-4d3ebc6242dc /usr ext4 rw,relatime,data=ordered 0 2
# /dev/sda6 LABEL=home
UUID=62de76ab-b6d4-4e3d-a423-c287b81813a9 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sda7 LABEL=public
UUID=d98a9c8e-2301-4e66-8c7f-26167633a4b0 /public ext4 rw,relatime,data=ordered 0 2
This looks fine to me, but when /dev/sda1 is mounted at /new_root, none of the other devices are mounted....
I don't know if this is what's causing the problem since /etc, and /usr are on separate partitions from root, but
this would be the first time I get a problem dividing things this way (on ubuntu, mint, fedora, et cetera).
So I tried:
https://bbs.archlinux.org/viewtopic.php … 3#p1283343
I get "* is owned by filesystem 2013.05-2" for all three dirs from step three.
None of the other steps have any effect....
I also tried:
https://bbs.archlinux.org/viewtopic.php?id=172943
My /dev/sda1 mounts to new_root, so I don't think I'm having his problem.
And:
https://bbs.archlinux.org/viewtopic.php?id=166423
I reinstalled systemd-sysvcompat, and I'm sure that's not my problem.
Interestingly enough, /usr/lib/systemd/systemd is an elf file on my target hard disk.
Is this an outdated issue or something? Or should /usr/lib/systemd/systemd be a text file?
Thanks in advance for your help guys!

WorMzy wrote:Oh, and /usr/lib/systemd/systemd is supposed to be an ELF binary. Not sure why you think it should be a text file.
I saw another thread saying that adding an entry there would help. I think it was "init=<something>".
WonderWoofy wrote:A separate /etc is not supported whatsoever. There needs to be initial access to a few things there. I'm sure it could be made to work with some initramfs hackery. But it is neither supported or wise to do so IMO.
I'll not do the separate partitions then. Thanks. I'll check back if it works/doesn't-works.

Hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

Hi
It may be virus, please reset all IE settings and try antivirus and scan your PC. Before that esure that other PC connected to the same internet is able to access the Site which will let you know if this is issues with ISP or not

"Install completed successfully", but many files are missing. (J2SE)

I downloaded the 80MB J2SE + netbeans package today, and when I try to install it, everything goes fine. Installer says it was successful, but MANY files are missing (including tha main netbeans file which the icon on my desktop links to). Here's my install log:
(Aug 17, 2003 12:50:17 AM), Setup.product.install, com.installshield.product.actions.Files, err, java.util.zip.ZipException: invalid stored block lengths
STACK_TRACE: 19
java.util.zip.ZipException: invalid stored block lengths
     at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:139)
     at com.installshield.util.ZipInputStreamWrapper.read(ZipUtils.java:146)
     at com.installshield.archive.index.ISInflaterInputStream.fill(CompressedURLConnection.java:228)
     at com.installshield.archive.index.ISInflaterInputStream.read(CompressedURLConnection.java:140)
     at java.io.FilterInputStream.read(FilterInputStream.java:93)
     at com.installshield.product.actions.Files.copy(Files.java:700)
     at com.installshield.product.actions.Files.copyFileWithFileService(Files.java:737)
     at com.installshield.product.actions.Files.install(Files.java:378)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1868)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:4649)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:365)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:325)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:135)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4276)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3652)
     at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:40)
     at java.lang.Thread.run(Thread.java:484)
"Installing J2SDK..."
"Finished Installing J2SDK..."
I have had nothing but problems with java so far and I am about ready to consider it a mediocre and unpredictable programming language that I can do without. Please help as i am quickly losing patience, especially on 56k when i have to download non-functional 80mb files. Anyways, this problem is happening on winxp home ed. thanks

. I did it on HSD cable
this time and again the file sizes match. but, when i
go to a command prompt, and type java or javac, they
are unrecognized commands.You need to set up your PATH environment variable to include the path of the java.exe and javac.exe files. For the current command prompt, typing in:
set PATH=%PATH%;C:\j2skd1.4.2\bin
Would do the trick. Change the directory, if you've installation is different. Then java and javac should be recognised.
and when i try to compile
an applet in netbeans that i wrote before and works
fine with an online compiler, it gives the error:
java.lang.NoSuchMethodError: main
Exception in thread "main" Netbeans is treating your applet as an application. You should tell it it is an applet. I'm not sure how to do it, sorry. Best thing would be to use NetBeans to compile, but load the applet in an external browser.
Regards,
Bhaveet

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

contact the developer?

MDT 2013 USMT customization to exclude specific file types

Hi,
I have a need to exclude a specific file type from migration with USMT within MDT 2013.
So far, I think I know the following:
I have to create a custom XML file.
I have to place the custom XML file in the deployment share's Tools\x86|x64\USMT5 folder.
I have to reference the custom XML file customsettings.ini using USMTMigFiles003 (1 and 2 are used by the default files).
I think I'll need to use unconditionalExclude.
However, I am having trouble finding a proper example of a custom XML file. I can find the reference documentation, but actually having a single example isn't as easy to find.
Specifically, I want to exclude all VMDK (VMware virtual hard disks) from being migrated, regardless of where on the machine they are.
Thanks for any assistance,
SA.

You need something like the below. You can find it in the provided link:
<unconditionalExclude>
If you want to exclude a file type from the migration, regardless of the other <include> or <exclude> rules, you can use the <unconditionalExclude> element. This element excludes objects globally across all components. For example, you
should use this element if you want to exclude all .mp3 files from the computer.
<migration urlid="http://www.microsoft.com/migration/1.0/migxmlext/excludefiles">
<component context="System" type="Documents">
<displayName>Test</displayName>
<role role="Data">
<rules>
<unconditionalExclude>
<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mp3]", "Fixed")</script>
</objectSet>
</unconditionalExclude>
</rules>
</role>
</component>
</migration>
http://technet.microsoft.com/en-us/library/cc722303%28v=ws.10%29.aspx#Ex1
Dustin Estes - MCP | www.dustinestes.com

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

Smartview webf run time prompts upon submit are not picking up from the POV

Hi ,
I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

I found a known issue for smart view in 11.1.2.1 read me doc
11075506
When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
Good Luck

OID is up & running but "ldap" process are not running

Hi all,
Oracle Internet Directory is up & running but LDAP processes ( Not Running ---- Process oidmon
Not Running ---- Process oidldapd
Not Running ---- Process oidrepld
Not Running ---- Process odisrv) are not running.
I am trying to configure SSO for reverse proxy server and ran the command ssocfg.sh https proxyServerName proxyServerPort
and when i am trying to go for next step that is ldapmodify -D cn=orcladmin -w welcome1 -v -f setdasurl.ldif
it is showing up cannot connect to LDAP server. and also when i am trying to acess SSO admin Server the redirection url is showing up with 404 page not found error.
pls help me
Thanks

Do 'oidctl status' and check if the 'oidldapd' is up and running. If not, start 'oidmon' by executing the command 'oidmon start'.
To start 'oidldapd', use 'oidctl' command.
Eg: oidctl connect=<sid_name> server=oidldapd instance=<instance_num> start
Sometimes, when you start 'oidmon', the 'oidldapd' process is also started. So, its a good idea to do 'oidctl status' after 'oidmon start'

When i run .app package keyboard controls are not available

I have built an opengl application using glfw & xcode. When i run the .app package resulted, from outside xcode, the keyboard is not responding. If i run the application from inside xcode or by running the actual binary from the terminal(or just by double clicking it) the keyboard and mouse input are working as expected.
What could be wrong when i double click the .app folder?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

Inventory scanning is successful, but performance gathering is not.

I am running the MAP tool in my environment. I am able to successfully connect to all of my Windows servers and see the WMI information about their processors, memory, OS version, IP address, etc. When I run a 30 minute performance gathering test on them,
only 12 of the 28 or so servers I'm scanning are reporting information. The rest of the servers aren't even appearing in the list of clients in the "CollectionStatistics" tab of the results spreadsheet.
The 16 failing servers are successful in reporting their inventories, though, so I know WMI is enabled and the credentials I provided are correct.
Troubleshooting procedures I've done:
- pinged the server by name and IP successfully
- Opened computer management (compmgmt.msc) and used the "connect to remote computer" option. While connected I verified that Remote Registry is started and running.
- Successfully established Telnet connections to the servers failing to report performance metrics on port 445 and 139.
- used wbemtest to successfully establish a connection to the remote servers. I was able to run the query "select * from win32_useraccount" and observe results returned.
At this stage I'm not sure what other tests to perform for troubleshooting. Has anyone else encountered this problem or have any advice as to how I can get these non reporting servers to start dumping performance data?

The performance data collector requires remote registry to be enabled. See this TechNet Wiki article for more information:
http://social.technet.microsoft.com/wiki/contents/articles/12163.map-prepare-the-environment-remote-registry-service.aspx
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Uninstall Adobe Shockwave 12.1.1.151 scripts run successfully but doesn't uninstall program

I am using sccm2012 R2 and trying to deploy package to uninstall Adobe shockwave player 12.1.1.151 using following script
cmd /c shockwave-test.bat
pushd "%~dp0"
msiexec /uninstall sw_lic_full_installer.msi
If run script manually on command prompt it uninstall Adobe shockwave player but deployment using sccm doesn't work.
Deployment status - success,
Message ID: 10008
program completed with success
Program and features still have Adobe shockwave player listed there.
I have also tried msiexec /x using product code as application using windows installer and registry key as detection method but same results
Here are logs of Execmgr.log file
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 06/11/2014 6:45:07 PM
2480 (0x09B0)
Processing [{40BF1D3A-8F3D-4088-A1F7-ED85EB5EFF7F}, 0]: OnContentAvailable
execmgr
06/11/2014 6:45:11 PM 4664 (0x1238)
[{40BF1D3A-8F3D-4088-A1F7-ED85EB5EFF7F}]: Content Version 12 is available for advert RET210E2, pkg: AO10022F, program Uninstall shockwave - test.
execmgr 06/11/2014 6:45:11 PM
4664 (0x1238)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
execmgr 06/11/2014 6:45:11 PM
4664 (0x1238)
Request a MTC task for execution request of package AO10022F, program Uninstall shockwave - test with request id: {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}
execmgr 06/11/2014 6:45:11 PM
4664 (0x1238)
Execution Request for advert RET210E2 package AO10022F program Uninstall shockwave - test state change from WaitingContent to Ready
execmgr 06/11/2014 6:45:12 PM
4664 (0x1238)
MTC task with id {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}, changed state from 0 to 4
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 06/11/2014 6:45:12 PM
4664 (0x1238)
Processing [{40BF1D3A-8F3D-4088-A1F7-ED85EB5EFF7F}, 0]: RemoveNotification
execmgr 06/11/2014 6:45:12 PM
4664 (0x1238)
MTC signaled SWD execution request with program id: Uninstall shockwave - test, package id: AO10022F for execution.
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Sending ack to MTC for task with id: {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Executing program cmd /c shockwave-test.bat in Admin context
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Execution Request for advert RET210E2 package AO10022F program Uninstall shockwave - test state change from Ready to NotifyExecution
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Checking content location C:\Windows\ccmcache\1g for use
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Successfully selected content location C:\Windows\ccmcache\1g
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Executing program as a script execmgr
06/11/2014 6:45:12 PM 1624 (0x0658)
Found executable file cmd with complete path C:\Windows\system32\cmd.exe
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Successfully prepared command line "C:\Windows\system32\cmd.exe" /c shockwave-test.bat
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Command line = "C:\Windows\system32\cmd.exe" /c shockwave-test.bat, Working Directory = C:\Windows\ccmcache\1g\
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Running "C:\Windows\system32\cmd.exe" /c shockwave-test.bat with 32bitLauncher
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Created Process for the passed command line
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
ClientID = "GUID:d0c3da0e-ff4f-48c2-8612-805a8de31191";
CommandLine = "\"C:\\Windows\\system32\\cmd.exe\" /c shockwave-test.bat";
DateTime = "20141107004512.476000+000";
PackageName = "AO10022F";
ProcessID = 1264;
ProgramName = "Uninstall shockwave - test";
ThreadID = 1624;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\1g\\";
execmgr
06/11/2014 6:45:12 PM 1624 (0x0658)
Raised Program Started Event for Ad:xx210E2, Package:AO10022F, Program: Uninstall shockwave - test
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="AO10022F",ProgramID="Uninstall shockwave - test", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
MTC task with id {CBD5312D-CAAB-446C-BB2F-7DB515F6EE79}, changed state from 4 to 5
execmgr 06/11/2014 6:45:12 PM
1624 (0x0658)
Program exit code 0 execmgr
06/11/2014 6:45:21 PM 4276 (0x10B4)
Looking for MIF file to get program status execmgr
06/11/2014 6:45:21 PM 4276 (0x10B4)
Thanks in advance for help and suggestions
RJ
RJ09

Thanks for quick reply Daniel
I tried your suggestion and in log files I found error
Product: Adobe Shockwave Player 12.1 -- Error 2753.The File 'swhelper_1211151.exe' is not marked for installation.
Error 2753.The File 'swhelper_1211151.exe' is not marked for installation.
Property(S): ErrorDialog = SetupError
MSI (s) (34:D8) [14:08:29:832]: Windows Installer removed the product. Product Name: Adobe Shockwave Player 12.1. Product Version: 12.1.1.151. Product Language: 1033. Manufacturer: Adobe Systems, Inc. Removal success or error status: 1603.
RJ09

OSD - MDT 2013 - USMT Scan/LoadState Runs Successfully but user profiles are not restored.

Similar Messages

Maybe you are looking for