OSS Note 1401249 - Issue in GUI status

Hi ,
As per 1401249 Note instructions, i need to add a new push button 'Display Income Levy Data',  in the standard report HIECILC0 .
In SE41 , I am giving the program name HIECILC0 and Status 'ALV', when I click on Change button,  I see 'Modify Status ALV in program HIECILC0' , where as in the Note instructions screen shot it is given as  'Maintain Status ALV in program HIECILC0'.
Have anyone faced this issue before, why is it 'Modify Status ALV in program HIECILC0' instead of 'Maintain Status ALV in program HIECILC0'.
I am not able follow the same steps given in the Note instruction because of this issue.
Please let me know how to proceed with this.

Hi ,
The  below thread resolved the issue.
Can't modify a gui Status
In SE41 Menu path: Edit -> Modification Operations -> Swich off assistant
Thanks

Similar Messages

  • Report program with detail list and GUI status.

    Hi,
    I am working on type 1 program (report) and want to use detail lists.
    I want to use a GUI status and want to use AT LINE-SELECTION. But AT LINE-SELECTION does not work when I use a GUI status.
    How do I achieve this?
    Thanks.

    Hi
    In the secondary windows, it is not possible to have GUI Status.
    If you need like that, you should go for ALV Reports.
    Here, You can have GUI Status only in the selection-screen as below..
    REPORT  zak014  LINE-SIZE 60 LINE-COUNT 20(2).
    TABLES: sscrfields.
    * Appliction Tool Bar Elements
    SELECTION-SCREEN FUNCTION KEY 1.
    SELECTION-SCREEN FUNCTION KEY 2.
    * Selection Screen
    PARAMETERS: matnr TYPE matnr.
    INITIALIZATION.
      sscrfields-functxt_01 = 'TEST1'.
      sscrfields-functxt_02 = 'TEST2'.
    START-OF-SELECTION.
      WRITE:/20 'CLICK HERE TO NAVIGATE'.
    AT LINE-SELECTION.
      WINDOW STARTING AT 5  5
             ENDING   AT 50 18.
      CASE sy-lsind.
        WHEN 1.
          WRITE:/ 'This is First window'.
        WHEN 2.
          WRITE:/ 'This is second'.
      ENDCASE.
    TOP-OF-PAGE.
      WRITE:/5 'LINE SELECTION'.

  • OSS Notes issue.. help needed

    Hello,
    Regarding OSS Notes:398217, When I open this oss notes, the status is showing "Cannot be implemented', when I try to implement it is showing message "SAP Note does not contain valid correction instructions'. What will be the issue here? Please help me.
    Thanks,
    Shreekant

    Hi Shreekant,
    There could be two reasons:
    Reaons 1:
    Not all SAP notes involve changes to programs, some notes can also involve make configuration (SPRO) changes which need to be done manually by the system user. Hence if the note is the type, then you cannot implement it, but need to read the note and implement the correction instructions manually.
    Reason 2:
    The SAP version is higher than the version for which the SAP note is intended.
    Now here note 398217 does make changes in a program however it's version is upto 4.6C. You can check program RLMOBINV from SE38 and go to subroutine UPDATE_TO_DATABASE and check whether the chnage indicated by the note has already been implemented. If your SAP version is > 46C then it has and hence SAP wont allow you to implement a obsolete note for this version.
    Cheers,
    Aditya

  • GUI status items are not displayed

    Hi all,
    Some parts of gui status are not displayed but some of them are displayed.
    What is the problem?
    Thanks.
    deniz.

    Hi snehi chouhan,
    I have created a program and two gui statuses for this.
    One of them is set at first display of report but not all items.
    Thanks.

  • Transport Screen objects-GUI status(SAP does not create request, why)?

    Hi experts,
      I use SE80 to change GUI status, but system does not create a transport request for me to transfer? why?

    Hi,
      Thanks for replay. Actually, the SE80->program->Gui status have some objects and they are already transfered. But I can't see them on target system. But When I create exactly the same name, the system tell me they are already created. I think it becuase the original language is 'DE' but I use default language 'EN' to modify and create the request?

  • How to retire/archive/status a released workbench transport for an OSS note

    My Question:  Is there a best practice for the "retiring" or "archiving" or "statusing" of released workbench transports for OSS notes that have been imported into the quality environment, but should never be imported into the production environment? 
    For example an OSS note is applied and imported into QS1, but then a CRT Hotpack is applied as an entire patch upgrade, so that the prior individual transport is no longer needed.  Best Business practice indicates to not delete a released transport, but unless there is a way to permanently segregate them from the remaining legitimately viable transports, there is always a risk that the "stale" code could inadvertently slip through thus overwriting good code.

    Hello.
    Well, you have confirmed what I suspected when I read the descriptions - wrong forum. 
    I chuckled and couldn't stop a broad smile from creeping across my face when I read your response though:  "the old BASIS type questions".  I knew we were a bit behind the times here; you have definitely confirmed this suspicion.
    Thank you again.  I'll try another search of the OSS notes or put in a customer message just for the heck of it.

  • Copying LT01 to ZTCode - GUI Status is not shown

    Hi All,
    I have copied LT01 TCode to ZLT01 including programs, screens, variants and user interface etc.. Then activated the Program. When I executed the TCode ZLT01 GUI status and tiltes are not shown. Only  "System" and "Help" on menu bar are showing on the screen and others which are in standarda TCode LT01 are not shown.
    Please suggest me how to proceed on this.
    Thanks in Advance.
    Param.

    Thanks for your quick response.
    I have activated the GUI Status and GUI Title. But still is not showing.
    Regards,
    Param.

  • How to reset OSS Notes with Question mark status in SPAU

    Hi,
    We are doing SPAU adjustments. In that under Note we have many OSS notes with status "Question Mark". We ran SAPRUPGM again. But still we have this question mark.
    We realized some of the notes are not applicable and want to reset. But when I select the note and reset, it gives a pop up to confirm the reset. I select "reset" there. But instead of reseting it gives me a popup asking to download the OSS note. If I cancel it it goes back to the initial SPAU screen. Nothing done. If I okay it it tries downloading the note.
    How to solve this situation?
    Can you also tell me if it is okay to leave the notes without resetting.
    Regards,
    Ravikanth
    Edited by: Ravikanth Tunuguntla on Aug 12, 2008 5:37 PM

    Appreciate the reply.  I of course did try to re-execute SAPRUPGM.  In background, it runs for 2 seconds and produces no log or spool.  When I run on-line, and un-tick the box for output log file, the resulting list shows these messages for the gree question mark notes.   These notes are no longer visible in SNOTE. Basically I'm stuck - with the green question mark, I don't know how to get rid of these Notes in SPAU.
    Corrections in SAP Note                                                                               
    NOTE 0000683004 0003                                                        Inconsistent data                       
    NOTE 0000693190 0002                                                        Inconsistent data                       
    NOTE 0000731027 0001                                                        Inconsistent data                       
    NOTE 0000764040 0003                                                        Inconsistent data                       
    NOTE 0000768618 0001                                                        Inconsistent data                       
    NOTE 0000770227 0001                                                        Inconsistent data                       
    NOTE 0000772460 0001                                                        Data for SAP Note 0000772460 incomplete 
    NOTE 0000775691 0002                                                        Inconsistent data                       
    NOTE 0000777671 0003                                                        Inconsistent data                       
    NOTE 0000782311 0002                                                        Inconsistent data                       
    NOTE 0000784108 0001                                                        Inconsistent data                       
    NOTE 0000785324 0002                                                        Inconsistent data                       
    NOTE 0000802475 0004                                                        Inconsistent data                       
    NOTE 0000826538 0002                                                        Inconsistent data                       
    NOTE 0000843717 0002                                                        Inconsistent data                       
    NOTE 0000864505 0002                                                        Inconsistent data

  • Issue with saving SAP& variant for report as per OSS note 1885125

    Hi,
    I'm implementing OSS note 1885125 and it instructs me to adjust several SAP& variants:
    The variants of the report RSUSR070 (SAP&_AUTH, SAP&_CHANGE, SAP&_PROFIL, SAP&_STANDARD,
    SAP&_TRANSAKT, SAP&_VALUES)
    must be adjusted.
    Call transaction SE38 for the report RSUSR070 in the client 000. Change the values for the relevant
    variants. On the selection screen, choose "+" ("All Selections" (Ctrl+F7)):
    l Select the "All Roles Irrespective of User Assignment" radio button.
    For the variant SAP&_BENU, you must select the "With Valid Assignment Of" radio button.
    If the variants are protected, run the report RSVARENT for each variant."
    Now I'm in client 000 and I can unprotect the variants with report RSVARENT, but then SAP tells me that SAP& is the SAP name space, and that I need to create new variants. So it doesn't let me save these. The whole point of the OSS note requesting the SAP& variants to be adjusted is because they are using in SAP standard transaction codes:
    S_BCE_68001418
    Roles by Role Name
    S_BCE_68001419
    Roles by User Assignment
    S_BCE_68001420
    Roles by Transaction Assignment
    S_BCE_68001421
    Roles by Profile Assignment
    S_BCE_68001422
    Roles by Authorization Object
    S_BCE_68001423
    Roles by Authorization Values
    S_BCE_68001424
    Roles by Change Data
    S_BCE_68001425
    Roles by Complex Criteria
    S_BIE_59000249
    Roles By MiniApp
    Any advice how to get round this issue please?
    Thank you
    Philipp

    Ansel,
    Thanks again!
    In RSA1 ->Transport Connection, yes, I can see the Source System objects.
    In the Source System objects, I have selected the ECC source system and dropped it to the right panel.
    Now I can a list of Datasource and Transfer Rules there.
    1) Does it mean these are all the source system related objects?
    I then create the normal transport request to capture all the objects. And release the Transport.
    2) Now how can I export this transport?
    What I try to do is to delete the existing SAP Source System. Create the new SAP Source System, then import back all the source system related objects...... so that my existing data model will not disappear after deleting and creating the new SAP Source System.
    Is the following steps correct?
    1) Collect all the Source System related objects and capture in Transport.
    2) Release and export the Transport (but how?)
    3) Delete the SAP Source System
    4) Create new SAP Source System
    5) Import the existing SAP Source System related objects (but how?).
    Please help, thanks in advance.

  • Repair Status:  Could not duplicate issue??

    Step 2 Service          January 11, 2013:  Could not duplicate issue                      
    Step 3 Return January 11, 2013:  Original product shipped 
    I read online that someone called apple(similar service) and they were sending a replacement but his said original as well. So is my ipod touch 5g going to be fixed or not? I couldn't listen to headphones because the jack broke. How hard is it for them to test putting some earpods in??

    No one here can know what you tried when you don't say. Experience has shown that many people can overlook what we might think to be obvious troubleshooting steps, so many of us offer any suggestion we think might help when it's not mentioned explictly by the questioner as having been tried.
    There is therefore no reason for you to be rude to lllaass, you not having said anything about what you had tried. S/he has done his/her best to try and be of help. No one here gets paid to help you, so it pays to be polite if you have any hope of getting help in the future.
    Regards.

  • OSS notes issue

    Hi Experts,
    I got one OSS note : 653949 for missing some standard structures in system.
    I understood that this Notes is mainly for the extneding the BAPI listed in that OSS note for adding some parameters.
    That importing parameters will be referred by those structures for which I am looking for. Both the structures creating is part
    of OSS implemention but I need to have only both structures in my system. Don't want remaining part.
    Here, I have doubt that how can I use this OSS note for my requirement. Will  it work properly If I siimply create with the
    access key  i.e. partial implementaion of that note OR anything else I need to take care of .
    Structures : DMSCLS_SEARCH_OBJECTS and DMSCLS_SIMPLE_SELECTION
    Can you please suggest me ?
    Thank you in advance.

    Hi,
    In your scenario you can go only with Table Implementations, as there are no dependencies.
    Thanks.,
    Anitha A

  • Not able to find proper OSS note for an issue araised in patching

    Hi All,
    Our client is having ECC 6.0 system and recently done patching. there is an error occuring after patching in a standard program.
    How to find the OSS note available if any for the same? i am searching in service market place with search term as the syntax error what I am getting while activating the program but didn't find any useful information.
    please help me in this regard.

    Hi
    I have searched on the description of the systax error I am getting, but not found any clue.
    Please find below the program anme and description of the error message I am getting. It looks like the problem is with a standard class corresponding to it.
    Program Name:  RFFOGB_T
    Syntax error:
    Method "WRITE_LOG_ENTRY" is not declared or inherited in class "CL_SWF_WFM_PARALLEL_SECTION".
    Your inputs are very much helpful.

  • Very important OSS Note issue

    Hi ,
    i have to implement an OSS Note 409645 .
    we need to do very small changes in Program  /SAPDMC/LLSMW_GLO_020F03.
    But we are getting information message '' No valid change license available for namespace /SAPDMC/  ''  after this action terminates.
    i am unable to understand some points mentioned in description of OSS Note
    can any one please help me in understanding it and help us how to implement this note
    Long Text
      Symptom
    When importing a project (export/import via text files), the following
    error occurs:
    Error while importing project xxxxxxx (table /SAPDMC/LSMCUST)
    Message number /SAPDMC/LSMW_GLO_010046
      Additional key words
      Cause and preconditions
      The error was caused by an incorrectly exported record.
      Solution
      If you have not yet done so, change the namespace role of the /SAPDMC/
      namespace from 'P' to 'C' using the tools in transaction SE01.
      Then implement the attached correction in the include
      /SAPDMC/LLSMW_GLO_020F03 of the exporting system.
      Repeat the export, the export should then no longer export the incorrect
      line. After that, repeat the import into the target system.

    Hello Gaurav,
    From my understanding, this note was two steps of implementation:
    - Manual steps
    - Program corrections
    In manual steps, it seems you have to use transaction SE01 to change some configuration. To do this, check:
    - Enter SE01 transaction
    - Click on icon 'Transport Organizer Tools'
    - Double click on entry 'Display/Change Namespaces'
    - Search for entry namespace /SAPDMC/ and change 'namespace role' attribute from P to C.
    For program corrections, you can implement them using SNOTE. It is the most recomended procedure.
    Hope that this may help you.
    Kind regards.

  • Upload / download gui-status/dynpro when function group

    Hi All,
    I'm coding a program where I can download and upload reports and module pools but I tried to do the same with function groups and I found It is different to upload dynpro and gui staus when the objet to generate is a function group.
    Could anyone help me a little in order to complete and finish this issue?
    Below is shown the routines I coding in order to achive that:
    For gui-status uploading I use:
    CALL FUNCTION 'RS_CUA_INTERNAL_WRITE'
        EXPORTING
          program   = prog
          language  = sy-langu
          tr_key    = tr_key
          adm       = adm4
        TABLES
          sta       = sta4
          fun       = fun4
          men       = men4
          mtx       = mtx4
          act       = act4
          but       = but4
          pfk       = pfk4
          set       = set4
          doc       = doc4
          tit       = tit4
          biv       = biv46c
        EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
    For screen uploading I use:
    GENERATE DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s  ID dynp_id
                          MESSAGE mess  LINE line   WORD    word.
        IF sy-subrc = 0.
          EXPORT DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s  ID dynp_id.
        ENDIF.
    But both options don't work when uploading function groups
    Regards...
    Edited by: Rob Burbank on Jun 1, 2011 11:58 AM
    Edited by: Kenneth Castañeda on Jun 2, 2011 7:31 PM
    Edited by: Kenneth Castañeda on Jun 2, 2011 7:34 PM

    Hi Kenneth,
    sorry, it is really not obvious that [there is a link behind zsaplink|http://code.google.com/p/saplink/].
    From the link:
    "SAPlink is an open source project that aims to make it easier to share ABAP developments between programmers. It provides the ability to easily distribute and package custom objects."
    This software allows you to up- and download all kinds of SAP objects. It is distributed under the GNU General Public License.
    I think this is exactly what you are looking for - or I did not understand your question.
    Regards,
    Clemens

  • Problem in GUI status of ALV Grid

    Hello All Experts,
    I have a following issue.
    Am displaying a report using   REUSE_ALV_GRID_DISPLAY. I have copied the GUI status from standard GUI   STANDARD_FULLSCREEN. Now when i dispaly the report i get  select all ICON just before my first column(Marked in red below). i do not need this icon, i have checked in my GUI status also this icon does not exist. can you please help me how to remove this icon.
    This is how i have declared the field catalog for my first column.
      fieldcatalog-fieldname    = text-013.
      fieldcatalog-seltext_m   = text-014.
      fieldcatalog-col_pos      = 0.
      fieldcatalog-outputlen    = 3.
      fieldcatalog-emphasize  = gc_x.
      fieldcatalog-key            = gc_x.
      fieldcatalog-checkbox   = gc_x.
      fieldcatalog-edit            = gc_x.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
    Am really thankful to your resposes.
    Regards,
    Satish

    i tested with
    REUSE_ALV_GRID_DISPLAY and it works fine as you want
    report ztestalv.
    type-pools:
      slis.
    data:
      i_usr02 type table of usr02,
      afield  type slis_fieldcat_alv,
      sp_group      type slis_sp_group_alv,
      t_listheader  type slis_t_listheader with header line,
      t_layout      type slis_layout_alv,
      t_fieldcat    type slis_t_fieldcat_alv,
      t_spec_groups type slis_t_sp_group_alv,
      event         type slis_alv_event,
      t_events      type slis_t_event,
      g_variant     like disvariant,
      gx_variant    like disvariant,
      g_exit(1)     type c,
      g_save(1)     type c,
      g_repid       like sy-repid,
      msgtyp        like sy-msgty,
      lt_dynpread   like dynpread occurs 1 with header line.
    start-of-selection.
      select * from usr02 into table i_usr02
      up to 200 rows.
    end-of-selection.
      t_layout-detail_initial_lines = 'X'.
      t_layout-detail_popup         = 'X'.
      t_layout-f2code               = 'PIC1'.
      t_layout-get_selinfos         = 'X'.
      t_layout-group_change_edit    = 'X'.
      call function 'REUSE_ALV_FIELDCATALOG_MERGE'
        exporting
          i_structure_name = 'USR02'
        changing
          ct_fieldcat      = t_fieldcat
        exceptions
          others           = 4.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program       = 'ZTESTALV'
          i_callback_pf_status_set = 'SET_PF_STATUS'
          i_callback_user_command  = 'USR_CMD'
          i_structure_name         = 'USR02'
          is_layout                = t_layout
          it_fieldcat              = t_fieldcat
          it_special_groups        = t_spec_groups
          i_default                = 'X'
          i_save                   = g_save
          is_variant               = g_variant
          it_events                = t_events
        tables
          t_outtab                 = i_usr02
        exceptions
          program_error            = 1
          others                   = 2.
    make sure your field ls_layout-box_fieldname is blank, as you using the checkbox

Maybe you are looking for