OSS notes issue

Hi Experts,
I got one OSS note : 653949 for missing some standard structures in system.
I understood that this Notes is mainly for the extneding the BAPI listed in that OSS note for adding some parameters.
That importing parameters will be referred by those structures for which I am looking for. Both the structures creating is part
of OSS implemention but I need to have only both structures in my system. Don't want remaining part.
Here, I have doubt that how can I use this OSS note for my requirement. Will  it work properly If I siimply create with the
access key  i.e. partial implementaion of that note OR anything else I need to take care of .
Structures : DMSCLS_SEARCH_OBJECTS and DMSCLS_SIMPLE_SELECTION
Can you please suggest me ?
Thank you in advance.

Hi,
In your scenario you can go only with Table Implementations, as there are no dependencies.
Thanks.,
Anitha A

Similar Messages

  • OSS Notes issue.. help needed

    Hello,
    Regarding OSS Notes:398217, When I open this oss notes, the status is showing "Cannot be implemented', when I try to implement it is showing message "SAP Note does not contain valid correction instructions'. What will be the issue here? Please help me.
    Thanks,
    Shreekant

    Hi Shreekant,
    There could be two reasons:
    Reaons 1:
    Not all SAP notes involve changes to programs, some notes can also involve make configuration (SPRO) changes which need to be done manually by the system user. Hence if the note is the type, then you cannot implement it, but need to read the note and implement the correction instructions manually.
    Reason 2:
    The SAP version is higher than the version for which the SAP note is intended.
    Now here note 398217 does make changes in a program however it's version is upto 4.6C. You can check program RLMOBINV from SE38 and go to subroutine UPDATE_TO_DATABASE and check whether the chnage indicated by the note has already been implemented. If your SAP version is > 46C then it has and hence SAP wont allow you to implement a obsolete note for this version.
    Cheers,
    Aditya

  • Very important OSS Note issue

    Hi ,
    i have to implement an OSS Note 409645 .
    we need to do very small changes in Program  /SAPDMC/LLSMW_GLO_020F03.
    But we are getting information message '' No valid change license available for namespace /SAPDMC/  ''  after this action terminates.
    i am unable to understand some points mentioned in description of OSS Note
    can any one please help me in understanding it and help us how to implement this note
    Long Text
      Symptom
    When importing a project (export/import via text files), the following
    error occurs:
    Error while importing project xxxxxxx (table /SAPDMC/LSMCUST)
    Message number /SAPDMC/LSMW_GLO_010046
      Additional key words
      Cause and preconditions
      The error was caused by an incorrectly exported record.
      Solution
      If you have not yet done so, change the namespace role of the /SAPDMC/
      namespace from 'P' to 'C' using the tools in transaction SE01.
      Then implement the attached correction in the include
      /SAPDMC/LLSMW_GLO_020F03 of the exporting system.
      Repeat the export, the export should then no longer export the incorrect
      line. After that, repeat the import into the target system.

    Hello Gaurav,
    From my understanding, this note was two steps of implementation:
    - Manual steps
    - Program corrections
    In manual steps, it seems you have to use transaction SE01 to change some configuration. To do this, check:
    - Enter SE01 transaction
    - Click on icon 'Transport Organizer Tools'
    - Double click on entry 'Display/Change Namespaces'
    - Search for entry namespace /SAPDMC/ and change 'namespace role' attribute from P to C.
    For program corrections, you can implement them using SNOTE. It is the most recomended procedure.
    Hope that this may help you.
    Kind regards.

  • Issue with saving SAP& variant for report as per OSS note 1885125

    Hi,
    I'm implementing OSS note 1885125 and it instructs me to adjust several SAP& variants:
    The variants of the report RSUSR070 (SAP&_AUTH, SAP&_CHANGE, SAP&_PROFIL, SAP&_STANDARD,
    SAP&_TRANSAKT, SAP&_VALUES)
    must be adjusted.
    Call transaction SE38 for the report RSUSR070 in the client 000. Change the values for the relevant
    variants. On the selection screen, choose "+" ("All Selections" (Ctrl+F7)):
    l Select the "All Roles Irrespective of User Assignment" radio button.
    For the variant SAP&_BENU, you must select the "With Valid Assignment Of" radio button.
    If the variants are protected, run the report RSVARENT for each variant."
    Now I'm in client 000 and I can unprotect the variants with report RSVARENT, but then SAP tells me that SAP& is the SAP name space, and that I need to create new variants. So it doesn't let me save these. The whole point of the OSS note requesting the SAP& variants to be adjusted is because they are using in SAP standard transaction codes:
    S_BCE_68001418
    Roles by Role Name
    S_BCE_68001419
    Roles by User Assignment
    S_BCE_68001420
    Roles by Transaction Assignment
    S_BCE_68001421
    Roles by Profile Assignment
    S_BCE_68001422
    Roles by Authorization Object
    S_BCE_68001423
    Roles by Authorization Values
    S_BCE_68001424
    Roles by Change Data
    S_BCE_68001425
    Roles by Complex Criteria
    S_BIE_59000249
    Roles By MiniApp
    Any advice how to get round this issue please?
    Thank you
    Philipp

    Ansel,
    Thanks again!
    In RSA1 ->Transport Connection, yes, I can see the Source System objects.
    In the Source System objects, I have selected the ECC source system and dropped it to the right panel.
    Now I can a list of Datasource and Transfer Rules there.
    1) Does it mean these are all the source system related objects?
    I then create the normal transport request to capture all the objects. And release the Transport.
    2) Now how can I export this transport?
    What I try to do is to delete the existing SAP Source System. Create the new SAP Source System, then import back all the source system related objects...... so that my existing data model will not disappear after deleting and creating the new SAP Source System.
    Is the following steps correct?
    1) Collect all the Source System related objects and capture in Transport.
    2) Release and export the Transport (but how?)
    3) Delete the SAP Source System
    4) Create new SAP Source System
    5) Import the existing SAP Source System related objects (but how?).
    Please help, thanks in advance.

  • Not able to find proper OSS note for an issue araised in patching

    Hi All,
    Our client is having ECC 6.0 system and recently done patching. there is an error occuring after patching in a standard program.
    How to find the OSS note available if any for the same? i am searching in service market place with search term as the syntax error what I am getting while activating the program but didn't find any useful information.
    please help me in this regard.

    Hi
    I have searched on the description of the systax error I am getting, but not found any clue.
    Please find below the program anme and description of the error message I am getting. It looks like the problem is with a standard class corresponding to it.
    Program Name:  RFFOGB_T
    Syntax error:
    Method "WRITE_LOG_ENTRY" is not declared or inherited in class "CL_SWF_WFM_PARALLEL_SECTION".
    Your inputs are very much helpful.

  • Problem related to OSS Note - importing file problem

    Hi,
    I m facing an issue while implenting an oss note 430580 , i have to import files from sapserver.
    but i don't know how to do it.
    below is the description of my problem.
    Import the following files from SAPSERV:
    /general/R3server/abap/note.0430580/K000687.PLM
    /general/R3server/abap/note.0430580/R000687.PLM
    Import the two files into your system.
    For more information on SAPSERV, see Note 13719.
    Can any one tell me how can i get rid out of this prioblem.
    whether this is possible or BASIS Team can only do this.
    system details
    Operating system     SunOS
    Machine type         sun4u
    R/3 release 4.6C

    Well, these files are part of the zip.file which belong to the note. This is part of a regular transport and is normally done be basis. The data and the cofile (K....PLM & R...PLM) should be imported into your system. Before doing so they have to be transferred to the file server. Better let BASIS do these kind of things.

  • OSS Note for MIGO "Update terminate (SAPSQL_ARRAY_INSERT_DUPREC)"

    Dear all
    I am facing problem during MIGO GR reference Others, MVT 561.
    Upon clicing Button: Save, I face 2 types of errors intermittently
    1. Material document is saved and generated but when comes to displayed, it will say "Document 4900496xxx does not exist in calendar year 2009" And I check in Table: MKPF and it does not exist at all
    2. I am not able to save it and face this termination error:
    The ABAP/4 Open SQL array insert results in duplicate database record
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLGLIU" had to be terminated because one
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and adminis
    termination messages, especially those beyond their normal deletion"
    I have done my investigation and the number range uder FBN1 for this MVT 561 under this Company Code and Year has been maintained.
    Can anyone advise me the OSS note to solve it? I cannot find a direct OSS note on it to solve this.
    Thanks.
    Edited by: Daimos on Oct 26, 2009 7:58 AM

    Sorry Jurgen
    I have posted so many material documents using MIGO to test it out and try to update my OMBT there so many times until I lost track what is the current number range when I wrote my question here.
    I have read that thread you posted regarding the ST22 analysis [Solution from Jurgen|Document does not exist after creation of PO; . I exported them to HTML and did a detail checking, and I find out it is FI GL there did not update the number range properly which in turns cause my GR to have problems.
    Below is my analysis and learning to share with others:
    1. Ask the ABAPER to find out which record value the system trying to insert. Copy down this number.
    2. Check the OMBT value of Current Number.
    3. Then use the MFPK Table to search the latest Number Range.
    4. Try to check if the record value trying to insert already exists in Current Number. Normally, it will exist and that is why 
        system  prompt "insert duplication".
    5. Then check if the record value trying to insert already exists in MFPK Number. Normally, it will exists it will exist and that is
        why system prompt "insert duplication". (There can be situation that the Current Number is lower than the MFPK Number,  
        but it  rarely happen).
    6. Replace the Current Number to be the Next Number of MKPF largest Number. Save and it should work.
    7. If it is not work, please create a material which is non valuated and perform GR, if GR can be done and we can display
        material doc, it means the error is caused by the FI GL number range error.
    8. There can be other issues such as activation of user exits and other.
    Jurgen, I got one more question to ask you. I have tried to replace the current number with the largest number of MKPF without + 1. It can solve my problem.
    But I wonder why SAP Notes and you suggest us to replace Current Number with largest MKPF value PLUS 1?
    Please advise.
    Thanks.
    Edited by: Daimos on Nov 2, 2009 8:41 AM

  • Problem while implementing  OSS note 1077403

    Hi,
    I am trying to implement a OSS note ( 1077403) using SNOTE transaction. When I download the note, the status of this note is u201CCan be implementedu201D. It creates few standard programs which are utility programs related to Unicode conversion. While  implementing this note, I am facing the issue "Objects can only be created in SAP package" and some of the objects in the note are not created. The note status becomes u2018Incompletely Implementedu2019.
    Can you please suggest what could be the issue?

    HI,
    For more efficence  direct link to note Note 1077403 - Cluster table check using SDBI_CLUSTER_CHECK
    Have you a basis release version >= 6.20 ?
    you can use transaction SNOTE to implement the version for Basis Release 6.20 and higher.
    Rgds
    Edited by: stéphane mouraux on Mar 1, 2010 6:31 PM

  • Help with OSS Note Quality

    Hi, I'm trying to review OSS Notes and I find a lot of notes that I feel don't have enough context to basically understand what the note is about.  Basically I feel the Note Quality is poor.  I found this one just today.  Could someone look at it and let me know if they feel they understand this note or is it just me?  Thanks!
    [Note 1346134 - 0TCT_DS01 Deletion of statistical data|http://i34.tinypic.com/r0wa4h.png|Note 1346134 - 0TCT_DS01 Deletion of statistical data]

    Hi Kenneth,
    I'm also there with you. This is something needs to be reported to SAP and they have review this OSS note as the description that they have given is not proper.
    There is some more information is missing. They are talking about the deletion of Statistical data from the table: RSDDSTAT_OLAP .... but they did not mentioned about the actual issue for which the correction has been applied..
    Onlyway to understand is that correction code that they have which will give some idea but this note needs more information to assist all users......
    Me I used to work on serveral notes but I did not come across this kind of note.. 
    Anyway have a nice day...

  • Use solution manager to create customer message and apply oss notes

    Hello All,
    Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
    Currently, our Solution Manager system is bieng used for Central System Monitoring!
    Please let me your your expert thoughts!
    Thanks,
    Antarpreet

    Hi,
    By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
    Refer the  [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
    Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

  • Implementation of OSS Note-304290

    Hi,
    This is Kiran Kumar. We have an issue with the US tax classification.
    Issue is Tax classification is not passing to the subsequent documents like Invoice to Debit Memo Request /Credit Memo Request. Hence Tax values are becoming zero. ususally XR1, X2, XR3,... are coming from the Vertex system (US tax system). Hence SAP suggested to implement the OSS Note-304290
    if you refer the OSS Note-304290 they are suggesting to new condition base formula and attaching the source code (Given in correction instructions-167690 ) in the base formula and finally assigning this Condition base formula to the tax conditions in the pricing procedure.
    if we refer the current pricing procedure , Tax conditions XR1,....XR6 are with the AltCty is 301 to 306 and AltCBV is 16.and the requirement is ZERO.
    Please suggest me where the new condition formula has to be applied- is it to be implemented in AltCty or AltCBV
    guide me to proceed furthur
    Regards,
    Kiran Kumar

    Hi ,
    Please go through the folowing points to implement the new source code.
    1. Use transaction VOFM to create a new condition base formula for Application 'V' (Sales/Distribution) in the customer name range.
    2. Implement the attached source code into the newly created formula. Save and activate this.
    3. Now assign the new base formula to the affected tax conditions in the used costing procedures (transaction V/08) for field Alternative condition base value.
    Hope it helps.
    Regards,
    Pasapula.

  • OSS Note in SAP

    Hi GURU's,
    What is OSS Note in SAP. I do not know about this. But so many times in Sdn some GURU's will suggest go to OSS note which help you. How to get authorisation to enter into OSS Note. Any membership. I am working in some company. Can you provide me the detailes?
    Thanks inadvance,
    Yogesh

    Hi
    On-line Support System is a service that SAP offers to their customers in order to manage situation in which you have to involve SAP in order to find a solution to your problem...if there are some errors in the std program, SAP can provide a note that contains the instructions to solve the issue..but notes are related also to FAQ, performance issues, consulting....
    you can search for a note by www.service.sap.com/notes or from your system with the transaction OSS1..
    Time to time SAP releases solutions of our (SAP) product as in form of notes. So it is just explanation of problem in SAP. You can use as a details of soln of your problem.
    OSS Note are nothing but correction/enhancement codes for a bug or error. When SAP releases a product it may have some bugs which are discovered later. Hence SAP releases the correction code as a OSS Note.
    We raise OSS notes when we are not able to resolve some of the issues or say some standard functionality/feature is not working out in BW and we ask help from SAP to resolve those. In turn, SAP comes back with a solution documented as an OSS note.
    You can logon into http://service.sap.com/notes
    OSS note is a document provided by SAP that described particular issue, usually with symptom, cause(the reason), solution provided, and some other info (correction instruction and code).
    OSS note has version, date issued, and categorized to application area (e.g BW, CRM, etc).
    Check my thread below.. it will definately solve your issue..
    Where to find SAP note?
    Regards
    Swati

  • How to create OSS note for SAP?

    Hi,
    How do I create OSS for SAP? Any step by step or notes related?
    appreciate your help!!!!!!
    Thanks,

    Hi Afi,
    If you are looking for creating an oss message with SAP  follow the path
    http://service.sap.com/notes --> Report a Product Error --> select your system --> Enter the search term ( related to your issue)  and componenet ( if its basis BC , change management BC-CTC , if its for solution manager use SV-SMG or the sub component )
    Now it will show the related oss notes and if that notes are not helpful you can create a message with SAP by clicking create message.
    Thanks
    Prince Jose

  • OSS notes for a Deleted Delivery

    Hi Experts,
    We have a strange issue. One of the users deleted the deliveries for an order. We  now want to delete the Order too. But we are unable to track the order.
    Since delivery is deleted, it is not possible to identify the related Sales order number or the materials attached to the delivery.
    do we have any OSS note for this ?
    Thanks,
    Arthy

    Dear Lakshmipathi,
    Thank you for your valuable suggestion. But we actually are trying to create a shadow table or a backup table to record the deleted delivery details in future. Could you suggest what this table should be like,how and what details should  we capture and how the new table should work in order to capture the deleted delivery details?
    Please let me knowif you have any possible suggestions for creating this shadow table.
    Thanks in Advance,
    Regards,
    Arthy

  • IDoc Adapter error / oss note 856266

    Hi all,
    Has anyone else run into and successfully fixed the error described in oss note 856266? We ran into exactly this issue. Found the note by searching on the error message, downloaded and applied the correction instructions, all the while feeling pleased it was such an easy fix...
    Nothing changed whatever though after the correction instructions were implemented. So either we did something dumb or the fix is not working for our system. Just wondered if anyone had similar experiences?
    We are on Win2k/SQLServer/SP13
    Cheers,
    Chris

    One LAST suggestion.  Looking at Note 837595, it doesn't seem to specify a value for authorization group (DICBERCLS).  Try authorization group 'SS' (without quotes).  So:
    Object: S_TABU_DIS
    Activity: 03
    Auth. Group: SS
    I recall now that a customer recently had this issue and (for them), this helped.
    Jin

Maybe you are looking for