OTL - Auto approvals issue.

Hi Folks ,
I have very unique problem identified in OTL setup.
When one of the employee applies for time card ( 8 hours ) , its getting auto approved instead of going to Supervisor.
We have defined the hierarchy level and approval method as HR_SUPERVISOR. Even though the requests are getting auto approved leaving one TO DO notification and another FYI notification to supervisor.
Did anybody come across this issue. If so what solution did you follow ?
please help us , as this turing as critical issue.
Thanks and regards
Raghu

Raghu,
Make sure that the auto approval is the style set in the preferences node which is attached to user. There might be multiple nodes attached to same user and the node with highest priority value will supersede other node values.
--Shiv

Similar Messages

Auto Goods Issue not taking place

Hii All
I hv Maintained backflush indictor in work center and in MRP2 view it is maintained as Workcenter
decides whether to backfluch .
But the auto goods issue is not taking place when the production order is saved and confirmed.
The stock remains the same ..
Can anybody tell the reason for that
Regds
Rakesh

Hi Rakesh,
what is the control key u have maintained in Routing?
if u r using Control key PP01 - Routing/Ref. op. set - internal proc., then after Production Order confirmation u have to do MB31- Goods Receipt for Order, with movement type 101.
If u r using PP03 Routing - in-house prod. auto. goods rct, then it accepts only single operation in a Routing (or) if u r having say more than one operations in a routing, then u have to give PP03 control key for the last operation.
I think u got it...
revert back if u have doubts.
Thanks & Regards,
Santosh

Should I spend the $280.00 to have Canon fix my 70D auto-focusing issue?

Should I spend the $280.00 to have Canon fix my 70D auto-focusing issue? Or just return back to my very much trusted Rebels?
Solved!
Go to Solution.

MelekalsCanon wrote:
Very much appreciate your taking time to send a response. As a new user I wasn't sure if anyone would bother. Allow me to add a little more to my first post. I fit in that niche between amateur and a person with clients. For over 10 years I have covered events for a non-profit agency capturing the look and feel of 20+ events per year and was given permission to purchase a few cameras over the year. My decision from the beginning was to use the Canon Rebel. Images were spot on and only once did I have an issue with one of them (after shooting outside events in 105 degree temps for 3 days).
So, when I retired a year ago it was for me a pretty simple choice to get a Canon for myself - especially since at that time the 70D was on the cover of magazines and was very highly touted. I also did a lot of desktop publishing and photo editing which helped me realize I wanted the best sensor, sharpness, resolution and lens I could afford - the 70D. My post was actually a result of reading many online responses including your very informative replies about the 70D focusing issues. My biggest concern is that I will spend several hundred dollars and maybe, just maybe get back a camera which captures better focused images, but still not as sharp as the lower end Rebels I was using. I had hoped to purchase my first "L" lens and really get excited - not repair the most expensive camera I've bought to date.
Thanks again and before it gets noted by someone...yes, I should have pushed this issue sooner and then at least the warranty would have covered the cost. An expensivve lesson learned. But I will have to add that at least one authorized Canon repair dealer told me they have had several folks feel like I did - that it was the photographer/me as a new user having the issue and not the camera. I now know it's my camera.
Let me clarify that I don't own a 70D, so anything I say about it is from watching what others have said, mainly in this forum. But it is disconcerting to see so much complaint about a camera that's supposed to have an innovative focusing system. One is strongly tempted to suspect that they went overboard in trying to make the camera serve both still photographers and videographers.
That said, I'm not a great fan of the Rebel line, because they lack autofocus microadjustment and I have at least one otherwise excellent Canon lens that would be useless without it. (The 70D does have AFMA, a point in its favor.)
As far as spending the $280 for the repair, I understand why it's a hard call. If I were in your shoes and were convinced that Canon understands the issue and would fix it correctly and permanently, I guess I'd go for it. If you don't think they do, but fell that you need something a cut above the Rebels, this may be a good time to buy a leftover or refurbished 7D. Even though I now have a 5D3, I still use my 7D's a fair amount and have been very happy with them. And the 7D2 has gotten such a favorable reception that's it's almost bound to make more 7D's available at a decent price.
Bob
Boston, Massachusetts USA

Whether it is possible to make auto goods issue below safety stock level

Hi SAP Gurus,
I am implementing MRP for generating stock transfer Planned orders from a Main Mother Plant to different Plants. We have defined a Safety stock level for materials at main Plant level.
There is a auto program available for generating auto goods issue against Purchase orders.
System picks up Qty as long as unrestricted stock exists for the material during auto goods issue.
System dont pick up any Qty below safety stock level (manual goods issue works below safety stock level).
We are defining safety stock to meet sudden requirements and have time for new procurement.
But it should allow us to do auto goods issue below safety stock level.
Whether this is possible and what need to be done ?
Thanks and Regards,
R.Velmurugan.

Hi Velmurugan,
I don't think auto GR is a problem from safety stock. Auto Gr can be done by two ways.
1. Control key and assigning the control key in operation(Preferably in last operation)
2. In production scheduling profile you can do it. You have to assign the production scheduling profile in material master work scheduling view.
Regards,
Krishnendu.

Auto-Brightness Issue. It randomly worked, then stop working all together.

Auto-Brightness Issue.
It randomly worked before, now it's not giving off any brightness at all. Unfortunately it stopped coming on all together. I tried updating it Itunes and it comes back on but tried to restore my Ipod touch. After restoring it, it said "restore error -50" and the backlight STILL doesn't come on, not even a flicker. PLEASE HELP!!!

Okay I tried to restore using iTunes and a little screen came up stating: An error occured while restoring this iPod (-50). I don't know what that means. It still ask do I want to continue to restore, but always gives me that same message. To make matters even worse, there is no Apple store in my town. The nearest is 3 hours away.

OTL - Auto Approving timecard

Hi,
We have got an issue where timecards get auto approve for cases given in metalink note 443432.1. What I want to know - is there anyways we can stop auto approve? Through some profile option or something.
Thanks!

The approval style form includes a number of components.
The first component is a 'data interdependency rule'. In this section you can create a validation rule for whether the data needs approval. This can be done for each receiving application for the timecard information.
The second section determines the approval method. e.g. HR Supervisor, Project Manager etc.
IIn the data interdependency section, the rule is coded in a Fast Formula. The FF can call an external function, so basically any logic is possible. The prupose of the rule is to return a flag indicating if the data for a specific application needs approval. If the FF returns Y(es) then the subsequent approval method for that application will be invoked.
Using this method, you can control what data requires approval and what does not.
If you extend this to use time categories, you can effectively determine if a subset of data requires approval.
Hope this help! It's a rather complex part of OTL that can take a long time to explain.
Regard
Tim

Spry Menu Bar 2.0 auto-width issues for sub items

I am testing the spry menu bar 2.0 and it displays perfectly in IE 9.0/8.0 but the auto width is not working for Firefox (testing 3.6.16), Chrome (testing 10.0.648.205), or Safari for windows. Content is being driven by PHP and MySQL. This is the first time I have come across something working better in IE than the other browsers. Great job on the IE patch script. How do I get the other browsers to cooperate? I moved the in page CSS generated by the widget browser to it's own CSS (called spry_menubar2_horizontal_sample_layout.css) and am including the files below in the head. The links below point to an exact copy of the files as the working copy of the files is located elsewhere.
SpryMenuBasic.css - link
SpryMenuBasicSkin.css - link
spry_menubar2_horizontal_sample_layout.css - link
SpryDOMUtils.js - link
SpryDOMEffects.js - link
SpryWidget.js - link
SpryMenu.js - link
SpryMenuBarKeyNavigationPlugin.js - link
SpryMenuBarIEWorkaroundsPlugin.js - link
the in page script is loacated directly under the <ul> lists.
Similar example with php removed:
<div id="navigation">
    <ul id="MenuBar">
      <li> <a href="http://www.videoonpointe.com/">Home</a> </li>
      <li> <a href="#">Gallery</a>
      <ul>
        <li> <a href="#">View Gallery</a></li>
        <li> <a href="#">Select Gallery</a>
          <ul>
        <li> <a href="#">Main Gallery</a>
          <ul>
            <li> <a href="#">a gallery</a></li>
        </ul>
        </li>
      </ul>
      </li>
        <li> <a href="#">Edit this Gallery</a></li>
        <li> <a href="#">Create Gallery</a> </li>
        <li> <a href="#" onClick="return confirm('This action cannot be undone. Are you sure?');">Delete this Gallery</a></li>
      </ul>
      </li>
            <li> <a href="#">Photo</a>
          <ul>
            <li> <a href="#">Edit Photo</a> </li>
            <li> <a href="#" onClick="return confirm('Deletion of this image cannot be undone. Are you sure?');">Delete Photo</a> </li>
            <li> <a href="#">Set as Gallery Thumbnail</a> </li>
            <li> <a href="#">Change Watermark</a> </li>
          </ul>
          </li>
      <li> <a href="#">Pricesheet</a>
        <ul>
          <li> <a href="#">Pricesheet Admin</a> </li>
    </ul>
      </li>
   </ul>
<script type="text/javascript">
var MenuBar = new Spry.Widget.MenuBar2("#MenuBar", {
           widgetID: "MenuBar",
           widgetClass: "MenuBar MenuBarLeftShrink",
           insertMenuBarBreak: true,
           mainMenuShowDelay: 100,
           mainMenuHideDelay: 200,
           subMenuShowDelay: 200,
           subMenuHideDelay: 200
</script>
</div>
Has anyone encountered this issue before? Any thoughts on how it can be fixed? Thank you for your help.

I am surprised no one has responded yet. Surely someone has encountered this before. Any thoughts?

Auto Restart Issue with Mac Book AIR

Have been using a Macbook PRO for sometime, no problem with Parallel installed. Due to frequent traveling, light and compact is my priority now, so I bought another AIR (11" i7 chip w/ Parallel installed as well). It was working flawlessly for few weeks, used it to download a couple of updates when I was in China (approx. 4Mbit/sec line speed) still no issues. UNTIL when I get back to my office and using WIFI updated another few stuffs, the AIR started to behave strangely with "your computer needs to restart due to problem ..." the last few days it happened at least 10 times daily, so I did what I know with the usual Mac way, reset PRAM, repair permissions blah blah blah ..problems persists so I called the service centre and the technician I talked to suggested the issue could be from 'your moderate internet speed causing incomplete system updated files.' ; half convinced but I followed / reinstalled ...with no CD, it has to press option to select to reinstall -- only then I realized a big problem, originally it states requires 27 hours to reinstall a fresh LION in my AIR but finally it completed and restated in still about MASSIVE 7-1/2 hours time.
As I have bought a USB network connector now (a convenient gadget when stays at hotels with different levels of facilities offered), this is not so troublesome and I think fellow users should consider using network and avoid using WIFI for this purpose. I notice once the left USB once was used (without turning off the WIFI) it keeps breaking the connections, as I read some articles from this forum the left USB could has some stability issues. After all the time spent, the computer freezes at times and auto restarts again. What the heck has this causes the AIR to behave this way ?
NEXT, I also read on the Power issues, I bought it without realizing one of the technical highlight is on high performance battery management but you can chop my head off and sit on mine if the AIR can last 3 hours (probably the suggested time is with computer power on but without using it at all). I don't want to sound un-nice as I have been using Mac for many many years: 1) if AIR is entirely basing on internet (VERY HIGH SPEED) for support is not a really very friendly method for users if there is reliability issues via internet line support, says what if we are caught in remote area with 30k/sec line speed then we are totally dead ... ; 2) the recent scare makes me dare not using the software updates now, as technician suggested, write down what is required to update, find it from apple and do it manually ...Goohs, my Mac Book Pro using side by side doesn't has this issue. Since when was the last time I have to suffer maintaining a Mac myself ? ... @%#&@*!(!
Anyone has clue to these or simply return to service centre to handle for me ?
Thanks in advance (first time user in this community).

Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio

Nokia 5800 v21.0.25 Auto-Rotate issue (firmware re...

Hi,
After updating OTA to the lastest firmware Auto-Rotate display stopped working. When i first installed the new FW I had issue with the home screen. It kept blinking like every 1 sec between homescreen and appication screen. This is when I noticed that I cannot reinstall the FW from either NSU or OTA(I suppose it has been pulled of due to some problem for this model). I was luckily able to soft-reset the phone which fixed the home screen blinking, but the Auto-rotate doesn't work anymore. Sensor seems to be ok since step counter is working, muting the phone call and snoozing alarm works
Now I'm pretty annoyed since I can't reinstall the software and this is my only phone at the moment so I have to loan some phone from somewhere in order to the this to the service.
So be carefull with the new firmware.
Solved!
Go to Solution.

gunglewack wrote:
You cannot reinstall OTA updates because they only work from version A to version B. Your phone now has version B on it already.
I've read that 5800s don't have NSU available for v21 yet, but I guess it's just a matter of time, then you can reinstall as many times as you like!
Thanks for the tip though. I don't use the auto-rotate or motion sensor at all, so I'll be updating just to get the improved Touch that's apparently coming.
I believe that if you have one version installed, and it is the latest one, you can reinstall it using NSU. I'm not sure how it works if you updated OTA vs NSU, though.
Recent phones: N91, N95-4, 5800xm, N900, E7, & now the beautiful N9

Auto login issues to iTunes Store password incorrect

Running Windows 7 with iTunes 11. When I open iTunes and it attempts to auto login I get an error message that my password is incorrect (see image below). I can type in the correct password and everything works fine until I close iTunes and reopen it, then I get the same error. Steps I have tried to resolve issue: 1) Logged out of iTunes, 2) deauthorized this computer and reauthorized it, 3) Reset warnings and cache. All to no avail.

When you change your USER ID (which is generally your E-MAIL), Itunes for some reason gets confused... Any apps, music etc. purchased off the itunes store before you made the change still bring up the original USER ID to update, authorize etc. So if you try and enter the password without changing to the new user ID, even if the account is technically the same, you're going to get "incorrect password" or "can not connect to itunes" or possibly "account doesn't exist". I found this out the hard way when I upgraded from XP to Windoze 7.
Message was edited by: jacksTLOS

Auto-login issues since Restoring to new iPod Touch

I recently purchased the new iPod Touch 32GB and restored all of my settings from my previous iPod onto this one. My previous Touch was also on 3.0.
Since the upgrade I have had constant issues with the auto-login web feature at my local Starbucks. It sits on the "Connecting" screen and then eventually fails. Then I have to choose to connect to the network (because it automatically disconnects wifi when the login fails). Then when I connect a second time it brings me directly to the login screen where I can enter my account info and choose to save it to auto-login in the future. The problem is that it never seems to work the next day when I try to connect again.
My previous iPod Touch never had issues with the auto-login feature. And let me tell you that it is frustrating that there is no cancel from the dimmed "connecting" screen. I have to wait 4-5 minutes for it to realize it's not working.
I have already tried:
-Clearing Cache
-Clearing Cookies
-Clearing Autofill Names and Passwords
Any help would be awesome!
JT

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Auto goods issue manufatured parts (mvt 281 Q)

hello all
i have approximatley 60 top level parts on my project that are set to be made in house they include thousands of materials under them, purchased and manufactured
once the top level has had all its parts issued and it is booked into stock i wish for it to automatically issue to the project is this possible????
currently backflush is set on the project and i confirm the activity and it issues but this is a task i dont think i need to perform is i
can get the auto issue working
thank you in advance
richard
Edited by: Riche rich on Feb 16, 2012 11:49 AM

You can use Manufacturer Part number functionality of SAP
you need to create manufacturer's part number and then assign it to your internalnumber
in this way you can assign your single internal number to multiple manufacturer (supplier number)
regards
Anish

Internal Order through Goods auto Goods Issue

Hi friends
i create PO with acc.*** F and commitment item ,order(Internal oder) .
vendor supplies goods i done GR through 101 . while i done GR goods automatically ISSUE to Internal Order .(contracter)
Po qty 100
GR qty 100
Auto GI to Internal Order (Contracter) - 100
now contracter return some qty - 10 to Company.
how this 10 qty comes to SAP system and in company stock

if u reverse or cancel GR thru MIGO; does the system automatically reverse goods issue?
Hi sachin
S. when i reverse in MIGO (101) goods reverse to GI also. but the qty goes to open order stock . i want tht stock comes to in my company stock .
how i ll come

OTL Time Card issue in Self Service

Hi All,
I am working in OTL. I m new to this module. Currently i am facing the below issue.
In OTL, there is a validation of project and task when user enters time card.
Whenever user enters time cards against the hour type which is not of PTO (e.g. regular) etc, project number
and project task should be mandatory.
It is working fine in OTL Time Keeper, but not working in Self Service Time Card.
I am analyzing the issue but not getting the exact solution for the same.
Kindly reply me to resolve it.
Thanks in Advance
Regards,
Basaw

HI all,
can anyone suggest me what steps should i take to resolve this issue?
Thanks in advance.
Regards,
Basaw

Lightroom 5 auto import issues with nikon d90

Hoping someone can help answer my question - I am wondering if Lightroom 5 has any issues with the auto import or tethering feature using a Nikon d90? I was using Lightroom 2 and the auto import feature has no issues with my d90. After I installed Lightroom 5 (Cloud App) and ran it for the first time, the first thing I used was the tethering feature and it worked great for 4 shots. I turned my camera off and then back on again and LR would not recognize my camera any longer for tethering. What's strange is that it will detect it for "Importing from Device" option. So, I went to plan two which was to auto import and that wasn't working at all. I am at a loss. I have a shoot coming up this weekend and need for one of these options to work. Any help is appreciated!!!

I use a D90, but I have never tried tethered shooting with it. Other users might have some suggestions for you, but looking at the list of supported cameras for tethered shooting the D90 is not "officially" supported in Lightroom. So you're probably on your own to find solutions. I know this isn't a lot of help.

OTL - Auto approvals issue.

Similar Messages

Maybe you are looking for