OTV Deployment with SVI defined in the firewall
Hello,
I have the following scenario.
1) DC 1 is having a firewall(FW1) with NExus 7K
2) DC 2 is having a firewall(FW2) with NExus 7K
3) Both firewalls are independent of each other
4) SVI (Default Gateway) of VLAN 10 and Vlan 20 are defined in the firewall
5) OTV is deployed across the DC with VLAN 10 and VLAN 20 are overlayed across the DC
6) Server 1 is in VLAN 10 in DC 1 and server 2 is in VLAN 20 in DC 2
Question: When server 1 in vlan 10(DC1) wants to communicate to Server 2 in VLAN 20(DC2). The server1 forwards the traffic to the default gateway of VLAN 10(in this case the SVI of VLAN 10 defined in the firewall 1), passes the policy and uses the overlay interface to reach to server 2(VLAN 20 in DC 2)
Return traffic from server 20 would hit the default gateway of VLAN 20(in this case default gateway defined in the Firewall 2). which ideally is not required, it should directly use the overlay link and land on the Firewall 1 which is on the DC1.
Can anyone suggest a problem for this solution.
Regards,
Henry Rose.
You only need one port.OK, initially I need only - lets say port 1080.
But then for example a client c1 requests a bind. The socks server opens a new socket for the client (e.g. on 50000) and tells the client on which port on the socks he is now listening, right?
In order to allow client c2 to connect to this new port the firewall needs to allow access to the new port (50000) first.
So there are more ports - there might be hundrets or thousands, right?
If its on a seperate box it doesn't matter. If its on the same box it should manage different ports.yes, different ports!
However, it should allow access to the ports that the socks opens for the clients, right?
Optimal would be a dynamic adaptation of the firewall, whenever the socks opens a new port the firewall grants access.
I assume its configurable, so its up to you.No, unfortunately it is not configurable. At least I havent found anything.
Probably won't either.???
Don't use ports already used. `netstat -a` will list all the used port on that box. obviously, and Jsocks allows to configure reusage of ports by flag true/false;
Has anybody setup a socks proxy with a firewall and knows how this is/should be done normally?
Has anybody experiences with JSocks?
Similar Messages
-
Driver Scanner will not update, there is a problem with proxy sttings and the firewall
Driver Scanner will not update. It says there is a problem in connecting to the Uniblue browser.
Also there is a problem with the proxy set up and the firewall.With that one, let's try getting an installer log to the Apple engineers for a look.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address: [email protected]
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing -
Cannot Video Conference or Lync call with users outside of the Firewall
I am having the following issues:
Internal users can video conf and call each other fine.
User A internally can Lync call user B externally and voice is ok
User B externally calls user A and user A sees no toast or anything
User A internal tries to video call user B External but it says starting video
User B external tries to video call user A internal and no toast appears
I have eliminated the firewall to my external edge interface as I have temporarily added an ANY rule to make sure no ports are being blocked.
I have 1 public IP with
AV edge using 443
Web Conf using 444
and SIP using 5061
because I cannot "toast" and internal user from external with
either video call or lync voice call the common traffic is:
A/V Edge ICE/STUN:443 Stun/UDP:3478
A/V Edge SRTP:443,3478 TCP 50,000-59,999
Does anyone have any ideas what the issue might be or what I can do to test?
1 Lync 2010 Edge Server 1 Lync 2013 FE Server
***Don't forget to mark helpful or answer***The traffic is getting to the front end server as I monitored SIP stack on the front end and got this from the log after initiating the call request...
TL_INFO(TF_PROTOCOL) [1]131C.2280::05/15/2014-15:41:51.239.00000020 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[4195629786]
$$begin_record
Trace-Correlation-Id: 4195629786
Instance-Id: 30A7
Direction: outgoing
Peer: 10.1.5.98:58292
Message-Type: request
Start-Line: INVITE sip:10.1.5.98:58292;transport=tls;ms-opaque=69ab187213;ms-received-cid=15400 SIP/2.0
From: "Mitch King"<sip:[email protected]>;tag=de00273c69;epid=0bf6878c0e
To: <sip:[email protected]>;epid=2c737c11a8
Call-ID: e5bf68f84e0643839d3fc3524bf0a925
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:K2EhWwgpmFyEPyRPWajS8wAA;gruu>
Via: SIP/2.0/TLS 10.1.3.106:5061;branch=z9hG4bKEAAC5ABA.63098DB96B0459CF;branched=FALSE;ms-internal-info="ccNiK2JF2ymTwz69iEJ-Koh9KulADFeojTs5M7Oy7Yteq5jQljcydysgAA"
Via: SIP/2.0/TLS 172.16.4.5:49216;branch=z9hG4bK0A64EEE1.72E873C44EADB9CF;branched=FALSE;ms-received-port=49216;ms-received-cid=14D00
Via: SIP/2.0/TLS 172.20.10.7:49185;received=213.205.233.99;ms-received-port=47938;ms-received-cid=1500
Record-Route: <sip:JNBSKV06.domain.co.uk:5061;transport=tls;opaque=state:T:F:Ci.R15400;lr;ms-route-sig=fas5y5A_Hi8kKMcMSekbcP058TEzxR0PC0fCKvEXCZO8S5jQljkAzQcAAA>;tag=A4CC2A746138BB8B2479B24FCDD3009C
Max-Forwards: 68
Content-Length: 4662
Content-Type: multipart/alternative;boundary="----=_NextPart_000_001F_01CF705C.920384C0"
Message-Body: ------=_NextPart_000_001F_01CF705C.920384C0
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-ID: <[email protected]>
Content-Dis; handling=optional; ms-proxy-2007fallback
v=0
o=- 0 0 IN IP4 181.39.65.34
s=session
c=IN IP4 181.39.65.34
b=CT:99980
t=0 0
m=audio 59182 RTP/SAVP 114 9 112 111 0 8 116 115 4 97 13 118 101
a=candidate:RbmFhQT26e8jfmCHHNDiiSm4NNjv3BrThjDipLYc9fQ 1 lW66uiImb0jhBi7NTpWyFg UDP 0.830 172.20.10.7 12252
a=candidate:RbmFhQT26e8jfmCHHNDiiSm4NNjv3BrThjDipLYc9fQ 2 lW66uiImb0jhBi7NTpWyFg UDP 0.830 172.20.10.7 12253
a=candidate:a1v6y+uA7x0DXU+4yO610jGEhZlHstMX+bFcj3G9/JY 1 iLWi/RPFsw/i/z5MX2n6+w TCP 0.190 181.39.65.34 54566
a=candidate:a1v6y+uA7x0DXU+4yO610jGEhZlHstMX+bFcj3G9/JY 2 iLWi/RPFsw/i/z5MX2n6+w TCP 0.190 181.39.65.34 54566
a=candidate:lJEokTFI5l/qLQ4yb72D2US/uQtgJN9F5UNNlN+wsYU 1 5iW2Mv+VRFVMpZVS6glc6Q UDP 0.490 181.39.65.34 59182
a=candidate:lJEokTFI5l/qLQ4yb72D2US/uQtgJN9F5UNNlN+wsYU 2 5iW2Mv+VRFVMpZVS6glc6Q UDP 0.490 181.39.65.34 51845
a=candidate:u2uHk5L+RctPvbqIA6asJAT5h0kjBj0L06I8bKwUr9I 1 6y3UI2Y5SmfiROa+dCxgDA TCP 0.250 213.205.233.99 10012
a=candidate:u2uHk5L+RctPvbqIA6asJAT5h0kjBj0L06I8bKwUr9I 2 6y3UI2Y5SmfiROa+dCxgDA TCP 0.250 213.205.233.99 10012
a=candidate:WawePotOSAKzTE3UjFxrFaULbrWoKE+8azhkahUlBvQ 1 L0TZQvD2nRP1kIR6SFEbMQ UDP 0.550 213.205.233.99 10015
a=candidate:WawePotOSAKzTE3UjFxrFaULbrWoKE+8azhkahUlBvQ 2 L0TZQvD2nRP1kIR6SFEbMQ UDP 0.550 213.205.233.99 10016
a=cryptoscale:1 client AES_CM_128_HMAC_SHA1_80 inline:gtklU/YbidFvHH7yktIG1IgAJYmdEQfpOKCbhs1t|2^31|1:1
a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:dKGa1f82DCYMtzMzQFYr/c2HYvpWHCkkSSBZTDzw|2^31|1:1
a=crypto:3 AES_CM_128_HMAC_SHA1_80 inline:JjNTaKZwo9xX+ebB4bXV1n+JkKDWaLk98qjfH+uB|2^31
a=maxptime:200
a=rtcp:51845
a=rtpmap:114 x-msrta/16000
a=fmtp:114 bitrate=29000
a=rtpmap:9 G722/8000
a=rtpmap:112 G7221/16000
a=fmtp:112 bitrate=24000
a=rtpmap:111 SIREN/16000
a=fmtp:111 bitrate=16000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:116 AAL2-G726-32/8000
a=rtpmap:115 x-msrta/8000
a=fmtp:115 bitrate=11800
a=rtpmap:4 G723/8000
a=rtpmap:97 RED/8000
a=rtpmap:13 CN/8000
a=rtpmap:118 CN/16000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=encryption:required
------=_NextPart_000_001F_01CF705C.920384C0
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-ID: <[email protected]>
Content-Dis; handling=optional
v=0
o=- 0 0 IN IP4 181.39.65.34
s=session
c=IN IP4 181.39.65.34
b=CT:99980
t=0 0
m=audio 57869 RTP/SAVP 114 9 112 111 0 8 116 115 4 97 13 118 101
a=ice-ufrag:V8SO
a=ice-pwd:cPfWCmdBZf5ok2wzZmhGw4iJ
a=candidate:1 1 UDP 2130706431 172.20.10.7 22964 typ host
a=candidate:1 2 UDP 2130705918 172.20.10.7 22965 typ host
a=candidate:2 1 TCP-PASS 6556159 181.39.65.34 50574 typ relay raddr 213.205.233.99 rport 10013
a=candidate:2 2 TCP-PASS 6556158 181.39.65.34 50574 typ relay raddr 213.205.233.99 rport 10013
a=candidate:3 1 UDP 16648703 181.39.65.34 57869 typ relay raddr 213.205.233.99 rport 10014
a=candidate:3 2 UDP 16648702 181.39.65.34 57495 typ relay raddr 213.205.233.99 rport 10017
a=candidate:4 1 UDP 1694235647 213.205.233.99 10014 typ srflx raddr 172.20.10.7 rport 20732
a=candidate:4 2 UDP 1694234110 213.205.233.99 10017 typ srflx raddr 172.20.10.7 rport 20733
a=candidate:5 1 TCP-ACT 7076351 181.39.65.34 50574 typ relay raddr 213.205.233.99 rport 10013
a=candidate:5 2 TCP-ACT 7075838 181.39.65.34 50574 typ relay raddr 213.205.233.99 rport 10013
a=candidate:6 1 TCP-ACT 1684797439 213.205.233.99 10013 typ srflx raddr 172.20.10.7 rport 25165
a=candidate:6 2 TCP-ACT 1684796926 213.205.233.99 10013 typ srflx raddr 172.20.10.7 rport 25165
a=cryptoscale:1 client AES_CM_128_HMAC_SHA1_80 inline:gtklU/YbidFvHH7yktIG1IgAJYmdEQfpOKCbhs1t|2^31|1:1
a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:dKGa1f82DCYMtzMzQFYr/c2HYvpWHCkkSSBZTDzw|2^31|1:1
a=crypto:3 AES_CM_128_HMAC_SHA1_80 inline:JjNTaKZwo9xX+ebB4bXV1n+JkKDWaLk98qjfH+uB|2^31
a=maxptime:200
a=rtcp:57495
a=rtpmap:114 x-msrta/16000
a=fmtp:114 bitrate=29000
a=rtpmap:9 G722/8000
a=rtpmap:112 G7221/16000
a=fmtp:112 bitrate=24000
a=rtpmap:111 SIREN/16000
a=fmtp:111 bitrate=16000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:116 AAL2-G726-32/8000
a=rtpmap:115 x-msrta/8000
a=fmtp:115 bitrate=11800
a=rtpmap:4 G723/8000
a=rtpmap:97 RED/8000
a=rtpmap:13 CN/8000
a=rtpmap:118 CN/16000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=encryption:required
------=_NextPart_000_001F_01CF705C.920384C0--
$$end_record
***Don't forget to mark helpful or answer*** -
XSL mapper problem with namespace defined in the element
Hi.
Using XSL Mapper from JDeveloper, I have imported one xsl that now is working and it generates an error. The source for the mapper is:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns4="http://sample.com" xmlns:ns3="http://sample2.com" version="1.0">
<xsl:template match="/">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
And I get
Line Number:(25) : Error: "soapenv:Envelope" Element not Found in Target Schema
But, if I change a little bit the definition, I solve the error.
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns4="http://sample.com" xmlns:ns3="http://sample2.com" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" version="1.0">
<xsl:template match="/">
<soapenv:Envelope >
Why is this happening? It will make a lot of work trying to change all the old transformations that are well formed according with w3 specifications.
Thanks in advance.
RegardsHi,
Perhaps it would help if you post your XML file. -
Deployment with "Refer to last SNP run" deploy
Hi guys
I'm running the deployment over /SAPAPO/SDP94 in the planning map. Demand is there, stock is there (and production, no STOs or other orders). ATD issue/receipt is standard.
When I run the deployment with procedure "Refer to last SNP run", nothing happens - nothing is deployed.
When I run the deployment with procedure "Real-time", everything stays unchanged (because I did the SNP heuristic seperately before), but now the system is at least deploying accordant to my expectations.
Because I want to run the SNP heuristic and the deployment normally on different days, "Real-time" is no option for the productive system.
What could be a reason for that?
Thanks in advance for your help.
RegardsHello Samir
Thank you for the answer.
All the points are fulfilled but the Deployment "Refer to the last SNP run" is not creating any confirmed distribution demands.
I did 2 trials:
1. SNP Heuristik (Network / Multilevel) -> deployment with procedure "Refer to the last SNP run" -> no deployment (no basis for TLB)
2. Directly deployment, but with procedure "Real-time" -> confirmed distribution demands -> deployed quantity for TLB available.
Actually standard should be point one, because SNP and Deployment running on 2 different days.
I suppose because the product can be deployed to different locations (actually just one has demand), but even when I lock the transportation Lanes to the other locations, isn't the deployment proposing anything.
Thanks for your help
Regards
Johannes -
Unable to Deploy Applications: "process is not defined in the descriptor"
All
I'm having a fairly serious issue here trying to take an LCA from one environment and get it in another environment. Both the source and destination environments are LCES 2.5 (LCES 2 with SP2). I have roughly 6 applications and there are some far dependencies (one application referencing an asset of another application) therein. I've taken an LCA of all these applicaitons from the source environment and the LCA imports just fine in the destination environment but I am unable to deploy any of the applications that have far dependencies. The error I consistently get when I attempt to deploy any application that has a far dependency is:
[Some process name].process is not defined in the descriptor.
I have tried all of the following:
1) Taking 1 LCA of all applications together
2) Taking multiple LCAs where each LCA contains only one application
3) Taking multiple LCAs where each LCA includes an application as well as all far dependencies for that application
Regardless of what I try, they won't deploy. I can import the LCA and I can get the applications in Workbench and play around with them but they simply won't deploy. I've also attempted to manually fix all depencies within the processes themselves but that doesn't work either.
Any help would be appreciated.Just wanted to follow up on the solution to my issue.
It appears the issue centers around circular far dependencies. In general, it seems LiveCycle chokes when two applications each reference one another. Note that I'm not talkinng about true circular referencing here wherein one process within application A references a process in application B while that same process refers back to the original process in application A. In fact, although I haven't tested recently, I believe LiveCycle may actually catch this kind of issue. The circular far dependencies I'm talking about is simply where a process in application A (call it a1) references a process in application B (call it b1) while a process in application B (call it b2) references a process in applicatoin A (call it a2). Apparently this kind of circular referencing causes the deployment of said applications to choke.
The fix was tedious as I had to manually delete all of the far dependencies from both application, deploy those two applications to get them into the runtime, and then implement those dependencies again.
Going forward it seems like a best practice to only ever have 1 direction for dependencies for any application. -
How do I connect to Windows with the Firewall turned on?
I'm able to connect to the 2 Windows boxes on my home network with ease when the firewall is turned off. Once I turn the firewall on, I'm unable to connect. *What do I need to do to have the firewall on and still be able to connect to these computers?*
Well, I think I figured it out. Under Preferences-->Sharing, I clicked "File Sharing." Then I clicked the "Options" button in the lower right and selected "Share Files and Folders Using SMB." When I went back to the Firewall control under Security, File Sharing (SMB) was listed as having access. Seems to work now.
-
Creative Cloud update fails with "the download appears to be corrupted" when tried through our company's firewall, but succeeds if the computer is taken outside the firewall. The IT guys have opened up the ports and URL's specified in the Adobe documentation. I have also captured the network traffic of both the failed and successful downloads for IT to examine (using Little Snitch), however they can find nothing to account for the problem. Adobe just seems to "give up and die" after about 2-3 minutes. Why is this? How can I or IT fix this?
Can I send the above log files to someone familiar with these issues for examination?Hi Gveo,
Please follow the article: Creative Cloud Help | About Creative Cloud Packager which will help you to get your issue fixed.
Thanks,
Ratandeep Arora -
We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC) 0x1BC0 SharePoint Server Search Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588) 0x1DE4 SharePoint Server Search Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC) 0x1060 SharePoint Server Search HTTP Protocol
Handler du4i 0x29E4 SharePoint Server Search HTTP
Protocol Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x29E4 SharePoint Server Search HTTP Protocol
Handler du54 High CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x130C SharePoint Server Search Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x2948 SharePoint Server Search Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvg0 High STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
en0e High CSTS3Accessor::InitURLType: Return error to caller, hr=80041200 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dv3p High CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb1 High CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb2 High CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200 [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil LokaHi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
Ping <servername>
2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Third-party not defined in the case of vendor with plant assignment ?
We use a Third-Party Vendor to direct-ship some products directly to our Customers.
When transfers third party order form's PR STO PO, prompts the following information
Third-party not defined in the case of vendor with plant assignment
Message no. 06769
Diagnosis
You are entering a purchase transaction involving a vendor to whom a plant has been assigned. Normally, this will involve the transfer of materials from one plant to another.
This process necessitates a delivery and a billing document in the SD system. The PO appears directly in the delivery due list of the issuing plant (vendor) and therefore does not need to be transmitted.
However, an item with the procurement form "third-party" (triangular business deal) cannot appear in the delivery due list.
Procedure
An item with the procurement form "third-party" can only be ordered from vendors without a plant assignment.
how should solve?
Many thanks, Adny.
Edited by: Andy Yao on Feb 8, 2010 3:58 AMHi Andy
Why u doing stock transfer order,in third party sales there is no stock transfer
Follow below procees for third party sales( Vendor ship materials directly to customer)
Create Sales order(Use item category TAS) >>> Purachase requisition(Automatically from order) >>> Purchase order >>> Vendor Invoice Verification >>> Invoice to customer
Kapil -
I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought to rectify the firewall problem without success and even temporarily turned off firewall with no success. Any ideas?
Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network/Advanced/DNS on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4 -
I have a canon MX 7600 multifunction printer. Each time I print I get a dialog box asking for permission to allow connections to the printer. This box stays on my screen for a few seconds, if I don't click allow I get a communication error which then requires me to delete the job and start over. I contacted Canon and proceeded with their suggestions to no avail. They now say it is an Apple issue. My security settings are set to allow connection to the canon printer. If I disable the firewall it works fine, once I enable the firewall the problem returns. This issue is a royal pain. Any suggestions on how to fix it short of buying a new printer?
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Error erase Queries in Query Manager- The query is used with user-define...
Hello Experts
I have deleted a User Field that had a Formatted Search and now I can not remove it because it is linked according to a UF, the error message is as follows:
"The query is used with user-defined values [Message 952-23]"
There will be a way to resolve this issue???
Thanks in advanceHi Juan,
I have tried this very limited, but the formid, is this a number in your case?
SELECT * from cshs t0 inner join ouqr t1 on t0.queryid = t1.intrnalkey
where t1.qname = '[%0]'
Running this query I can get the form id that I need to recreate, but I have a feeling you already know the form id, is this correct?
- Is there an error when you try to recreate the form id?
- Will it not let you recreate the same form id because the id is given by the system?
If it is not possible to recreate the form id, please prepare a backup and log a message. Support should be able to correct the entry in table cshs.
Hope it helps.
Jesper -
The application was previously deployed with version 'V2.0'
hi am having this error where running my appication am in jdeveloper 11.1.1.6.0,the application was running correct the previous day
IntegratedWebLogicServer startup time: 34045 ms.[Running application on Server Instance IntegratedWebLogicServer...]
IntegratedWebLogicServer started.
[09:32:46 AM] ---- Deployment started. ----
[09:32:46 AM] Target platform is (Weblogic 10.3).
[09:32:46 AM] Retrieving existing application information
[09:32:46 AM] Running dependency analysis...
[09:32:46 AM] Deploying 3 profiles...
[09:32:46 AM] Wrote MAR file to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\AutoGeneratedMar
[09:32:49 AM] Wrote Web Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\ViewControllerWebApp.war
[09:32:49 AM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
[09:32:49 AM] Info: Any customizations created while running the application will be written to 'C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.mds.dt\adrs\\AutoGeneratedMar\mds_adrs_writedir'.
[09:32:49 AM] Wrote Enterprise Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs
[09:32:49 AM] Deploying Application...
<16 Apr 2013 9:32:49 AM> <Error> <Deployer> <BEA-149082> <You cannot deploy application 'j2ee-app' without version. The application was previously deployed with version 'V2.0'.>
<16 Apr 2013 9:32:49 AM> <Warning> <Deployer> <BEA-149124> <Failures were detected while initiating deploy task for application 'j2ee-app'. Error is: '[Deployer:149082]You cannot deploy application 'j2ee-app' without version. The application was previously deployed with version 'V2.0'.'>
[09:32:49 AM] #### Deployment incomplete. ####
[09:32:49 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application due to error deploying to IntegratedWebLogicServer.
[Application stopped and undeployed from Server Instance IntegratedWebLogicServer]
i don't what to delete C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\Edited by: adf009 on 2013/04/16 10:45 AMHi,
Check below link,
Integrated Weblogic is not running Jdeveloper application
Nilum. -
About to deploy with the navy, can i use my ipad2 overseas?
i intend on getting my husband an ipad2 while he is on deployment with the navy. my question is, if he is in another country will he be able to use it for face talk so he can see his baby daughter? more than likely he will only go to england and dubai which are both big places...so i just want to know if it would even work before i paid 500$ for it.
UNLIKE MANY OF THESE REPLIES, I can GUARANTEE you that FaceTime will work in every country, as ong as your husband has wifi (wireless internet connection)!
The reason it didn't work before in Dubai and some other countries, is because FaceTime would need to be activated by communicating to the Carrier, and some carriers like in China or Dubai would not let you... Although since the iPod touch 4, FaceTime has been activated through an apple id account...
Hope this helps you all understand... God bless the troops!
Maybe you are looking for
-
I updated my I-pad 1 to the new sofware for it and now one of my apps (Dream Fish) will not open how to I fix it?
-
Have you had problems with Bridge CS6 after CR 8.4 installed?
Adobe Bridge CS6 running on Mac OS X 10.7.5 crashed several times while sorting images . After installing Camera Raw 8.4, images in portrait orientation rotated to landscape and now the rotate image buttons and menuitems are unavailable for raw file
-
Running applescript in background (as a standalone app or iTunes script)
Hiya, I'm working on making an Apple script that syncs my currently playing track with Twitter, Facebook, and Last.fm. I have the syncing portion worked out, but the method in which the program receives information is not ideal. I was wondering if th
-
Indesign CS5 Video & Software-Frage
Hallo Zusammen, zwei Fragen hätte ich, vielleicht kann Sie mir jemand beantworten :-) 1. Wenn ich ein Video einbinde und dieses dann als SWF exportiere, sieht es beim abspielen relativ grobpixelig aus. Und wenn ich auf Vollbild klicke, dann wird zwar
-
Online chat, July 16, New I/O (NIO) APIs
The New I/.O (NIO) APIs introduced in J2SE v 1.4 provide new features and improved performance for buffer management, scalable network and file I/O, character-set support, and regular-expression matching. Learn more about the NIO APIs, and get questi