Output error in standard report to z report

HI ABAPers....the issue is very much urgent ,so please kindly solve the issue.
I copied the standard program RV16ACHD into a z program. and also i copied the function modules in RV16ACHD as z function modules in z program in a different package. Now the z program is activated. on execution i am getting the selection screen, in that i entered date in the change data ( only that field and others r empty). when i executed yesterday the output came but today it is showing a message like
"No change documents found to match the specified criteria".But in the standard report i am getting the output. Please tell me the solution and where went wrong.

Hi,
Check this fm call
* change documents
call function 'SD_CONDITION_CHANGE_DOCS_LOAD'
       exporting
            report                = report   "<<<< keep this value as same standard
            cond_data_entered     = cond_data_entered
            change_data_entered   = change_data_entered
            selection_screen_flag = selection_screen_flag
            only_deleted_records = p_kdele
       tables
            so_knumh              = so_knumh
            so_date               = so_date
            so_time               = so_time
            so_user               = so_user
            so_tcode              = so_tcode
       exceptions
            others                = 1.
if you check the value for REPORT parameter value inside the function module
SET CHGDOC-CLASS (ie. COND_A, COND_B, etc...)
chgdoc-class5(1) = report4(1).
I think you need to keep the value for REPORT parameter as same as standard
aRs

Similar Messages

Error in standard Customer Listing Summary report

I have three questions about this report.
1) Has this report by chance been deprecated? All of the environments that I have checked have the customer listing summary (and detail) concurrent program as NOT enabled. We are on oracle applications version 11.5.10.2.
2) When I try to run the report wide open it fails with the message "process terminated by signal 10". I figure this is due to the fact there are over 1 million customers in the table and the server is running out of memory or something of that nature. Any other ideas as to why I'm receiving this error?
3) The report will complete successfully if you include some parameters. I used customer number in this case and it worked; however, when I tried customer name low and customer name high. Any value I choose would result in the following error: REP-0091: Invalid value for parameter 'P_CUSTOMER_NAME_LOW', which seems to point to a data type error. I checked the value set, AR_CUSTOMER_NAME, and it has a char data type of size 360 which matches the data type varchar2 and size 360 of the database column, hz_cust_accounts.party_name. Any suggestions as to why I am receiving this error?

1) Has this report by chance been deprecated? All of the environments that I have checked have the customer listing summary (and detail) concurrent program as NOT enabled. We are on oracle applications version 11.5.10.2.I believe not.
XML Publisher and Concurrent Manager Integration [ID 276691.1]
Publishing Concurrent Requests with XML Publisher [ID 295409.1]
Customer Open Balance Report APPS-FND-01030 customer name ... is longer than maximum length 50 characters [ID 1118825.1]
Why does Customer Name LOV parameter in Autoinvoice Import Program Gives APP-FND-01564: ORACLE error 24345 in fdlget? [ID 1058105.1]
2) When I try to run the report wide open it fails with the message "process terminated by signal 10". I figure this is due to the fact there are over 1 million customers in the table and the server is running out of memory or something of that nature. Any other ideas as to why I'm receiving this error?Please check the CM/OPP log files for any errors.
3) The report will complete successfully if you include some parameters. I used customer number in this case and it worked; however, when I tried customer name low and customer name high. Any value I choose would result in the following error: REP-0091: Invalid value for parameter 'P_CUSTOMER_NAME_LOW', which seems to point to a data type error. I checked the value set, AR_CUSTOMER_NAME, and it has a char data type of size 360 which matches the data type varchar2 and size 360 of the database column, hz_cust_accounts.party_name. Any suggestions as to why I am receiving this error?See if (When Customer Names Greater Than 50 Characters, Reports With This Parameter Have No Output Or Error [ID 307979.1]) helps.
Thanks,
Hussein

How to get the output of a standard report RFBILA00 in PDF form.

hi,
I have to get the output of the standard report RFBILA00 in the PDF form.
Thanks.

Hi Rao,
you can run your report RFBILA00 in background and in background job you can add one more step, next in that step you can add custom report like zsubmit .
job should be set like
step1: RFBILA00 with variant.
Step2: zsubmit report with variant.
In Zsubmit report you can read, your first step spool using FM GET_JOB_RUNTIME_INFO
and pass that spool in the FM CONVERT_ABAPSPOOLJOB_2_PDF.
when second report run in job you can set your target like download in the server or send email etc.
Regards,
Prasenjit

Attach the output of a standard OM report in email NTF

Hi All,
I have to attach the output of a standard Order Manangement report in the email notification. Can anybody please let me know what should be the approach for this.
Thanks

In the concurrent program screen, select options . Under Notify the following person, eneter the email address where output needs to be sent.
Other option could be to create a send mail package and call that from after report trigger of report. The email address can be inputed as a parameter. For more information for this visit
http://sureshvaishya.blogspot.com/2008/02/email-through-plsql.html
The third option could be to call the report from a shell script program and after report is completed email the output using mailx functionality.

Does anyone know how to convert the output from the standard report to xml?

Does anyone know how to convert the output from the standard SAP report to xml?

since it a standard report which you cannot modify you can only do the following.
submit report exporting list to memory
then
list from memory and then
use the returned itab along with CALL TRNSFORMATION key word to convert to xml.
but this only going to place the whole list content (including data and formating lines,etc) into a xml element and not the actual data alone in the list .

NEW STRANGE PERMISSION ERROR reported as IMPUT/OUTPUT error

Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8571.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8572.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8573.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8574.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8575.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8576.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8577.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8578.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8579.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8580.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8584.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8585.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8586.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8587.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8588.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8589.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8590.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8591.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8593.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8594.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8595.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8597.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8598.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8599.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8600.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8601.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8602.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8604.ht ml
Errore apertura 5: "Input/output error" su Library/Documentation/Help/MacHelp.help/Contents/Resources/ko.lproj/pgs/8605.ht ml
I have the file MacHelp.help in the reported position under Harddisk Lbrary (and not in Library of user's Account - mine Folder Help is empty).
During the Repair of permission the Mac freezes while checking these part and later resumes.
The Mac is working without apparent problems.
Any suggestion ???
THANKS
Message was edited by: WALTER-MILANO-ITALY
Forgot to say that the file MacHelp.help is reported by Finder to be a Final Cut Express file. It opens and happens to be a general help file for Mac with links to other Help

Thanks for your suggestion. The original disk was Tiger. Now I have SnowLeo.
I will try to do it with SnowLeopard disk.

Report output error

hi all,
i am using 3.0b.when i am running query its giving output error.
system error: Program : SAPLRRK0 and Form SETXX_FUELLEN_0-02-
i refered sap note no 728683.there solution i got it
now i want to know why that error is raising.
can any knows kindly let me know
thanks&regards,
vastav.

Hi,
That is program error.
solution.
For the Domain 'RRSPL' please change the field 'No. characters' from 4 to 8.
Procedure for doing this:
1. Tx: se11
2. Data type : RRK_SX_SPAGGR
3. double click on component type: RRSPL (2nd line)
4. double click on the domain 'RRSPL'
5. change the field ''No. characters' from 4 to 8.
6. Activate.
Best Regards,
SG

Signal 4 error encountered while running a customized report

Signal 4 error encountered while running a customized report
We are running Oracle Applications version 11.5.10 on Oracle RDBMS 9.2.0. and IBM AIX 5.3 o production system and AIX 5.2 on test machines. We have made a new clone of production database on test machine and after installation of a clone on test-machine all customized reports terminated with signal 4 error.
Can anybody tell the possible causes of signal 4 errors and their remidies ?

Thank you for the link, i will read it...
I have problemss with PDF output...
When trying to run any concurrent request with PDF output, it completed with error and show the following message in the request log file:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Spawned Process 499776
stat_low =84
stat_high = 0
emsg:was terminated by signal 4
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 20824997

Error exporting report with sub report and parameters

Post Author: joncombe
CA Forum: JAVA
I am using the JRC to export to a PDF file a report that has a sub report within it. Both the main and subreport connect to an Oracle database via an Oracle ODBC connection and both share a single parameter, RUN_ID. I need to set a value for the parameter in both reports. If I don't do that I get this error:-com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Some parameters are missing valuesI have the following code to update the parameters in both reports. ParameterField thisParameter1 = new ParameterField ( ); ParameterField thisParameter2 = new ParameterField ( ); Values thisValue1 = new Values ( ); Values thisValue2 = new Values ( ); ParameterFieldDiscreteValue thisParamDV1= new ParameterFieldDiscreteValue(); ParameterFieldDiscreteValue thisParamDV2= new ParameterFieldDiscreteValue(); thisParameter1.setReportName(""); thisParameter2.setReportName("DQA_GER_Adressverification.rpt"); thisParameter1.setName("RUN_ID"); thisParameter2.setName("RUN_ID"); thisParameter1.setType(FieldValueType.numberField); thisParameter2.setType(FieldValueType.numberField); thisParamDV1.setValue(254); thisParamDV2.setValue(254); thisValue1.add(thisParamDV1); thisValue2.add(thisParamDV2); thisParameter1.setCurrentValues(thisValue1); thisParameter2.setCurrentValues(thisValue2); parameterFields.add(thisParameter1); parameterFields.add(thisParameter2); ReportStateInfo repStateInfo = new ReportStateInfo(); repStateInfo.setParameterFields(parameterFields); reqCont.setReportStateInfo(repStateInfo); With this code in place I have found that if I run using the JRC supplied with Crystal Reports for Eclipse I get the following error:-ERROR - QueryEngine error: verify database failed.ERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)ERROR - Failed to export reportcom.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unexpected exception thrown at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Caused by: java.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) ... 17 moreERROR - JRCAgent1 detected an exception: An error occured while exporting the report at com.businessobjects.reports.sdk.b.b.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Error exporting report : report. Error is ReportSDKException: An error occured while exporting the reportAn error occured while exporting the reportcom.businessobjects.reports.sdk.d.byte(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) With the JRC supplied with Crystal Reports XIR2 I get this error:- INFO - PdfExporter: serializing pdf document and cleaning upINFO - Disk Exporter: verifying export to destinationERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source) at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source) at com.crystaldecisions.reports.a.e.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.i.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)INFO - Disk Exporter: finalizing export to destinationERROR - JRCAgent1 detected an exception: java.lang.NullPointerException at oracle.jdbc.driver.T4C8Oall.getNumRows(T4C8Oall.java:870) at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:811) at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1037) at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132) at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1687) at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1653) at com.crystaldecisions.reports.queryengine.driverImpl.o.ew(Unknown Source) at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.d4(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.f(Unknown Source) at com.crystaldecisions.reports.queryengine.ao.dP(Unknown Source) at com.crystaldecisions.reports.queryengine.av.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.if(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.do(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.try(Unknown Source) at com.crystaldecisions.reports.queryengine.ba.for(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.a(Unknown Source) at com.crystaldecisions.reports.dataengine.a9.if(Unknown Source) at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.g(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.i.g(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.null(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.e.p.az(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source) at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source) at com.businessobjects.reports.sdk.b.i.int(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source) at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174) at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)I believe the error is that the SQL query in the main report is being updated with the RUN_ID but the SQL in the sub-report is not. I am not sure why the update to set the RUN_ID in the second SQL query fails, but it seems to me the JRC is not detecting it as a missing parameter and is passing the SQL including {?RUN_ID} to Oracle, causing the JDBC driver to fail with this NullPointerException. I think this because further up in the log I see this:-INFO - Executing query: SELECT v.* FROM v_ger_main vwhere v.run_id = 254INFO - Verifying databaseINFO - Executing query: SELECT h.* FROM v_ger_av_ls_tagging hwhere h.run_id = {?RUN_ID}ERROR - QueryEngine error: verify database failed.Both connections are from the same database, but the first has the updated value (254) whilst the second query still seems to have the parameter and so fails to verify.Can someone suggest how I can fix this problem or if I have missed something that is required?Thanks.Jon.

Post Author: Ted Ueda
CA Forum: JAVA
What happens if, instead of passing in parameter field values, you pass the report source object to the viewer (ReportViewerBean for stand-alone or CrystalReportViewer for web)? The viewer should introspect the report for the parameter fields and bring up a parameter field entry dialog box. Does such a dialog box come up? Is only the main report parameter field queried for, or both main and subreport paramter fields? When you enter correct values for the field, does the report display?
Hopefully, the above should narrow down the issue.
By the way, JRC doesn't support ODBC connections, only Java based connectivity such as JDBC, JavaBeans and XML. If you have a report with ODBC, then it looks for a JNDI connection with the same name.
Sincerely,
Ted Ueda

Error in MSS Report (Using MSS Reporting Launch Pad)

Hello,
I'm currently using the convert manager's desktop data to MSS report launch pad for the portal.
When trying to run the report in MSS, I'm getting the error below:
"Error in Manager Self Service. When calling the report, the following error occured. Error when executing query Z_ABCD." This is from an SAP Query report and I could not determine what caused this error.
Have anyone encounter this and if you are able to resolve it?
Any information would be greatly appreciated.
Thank you,
Tam Ly
County of Sacramento

hi,
Go to transaction RSCUSTV27 and check if any standard template is maintained.
Use
In this activity you can make the following settings (for systems with a Release higher than SAP BW 3.x):
You can set your own Web template as the standard Web template for ad hoc analysis.
You can set your own Web template as a standard Web template for BEx Broadcasting.
You can set a Web template that is used during BEx Broadcasting for queries for generating documents.
You can specify a Web template that is used during BEx Broadcasting for enterprise reports.
You can set your own Web template as a standard Web template for reports.
Standard settings
The delivered standard Web template (0ANALYSIS_PATTERN) is used for ad hoc analysis.
The delivered standard Web template 0BROADCASTING_TEMPLATE is used for BEx Broadcasting.
The delivered standard Web template 0QUERY_TEMPLATE_BROADCASTING70 is used for broadcasting queries.
The delivered standard Web template 0REPORT_TEMPLATE_BROADCASTING is used for broadcasting reports.
The delivered standard Web template 0REPORT_DEFAULT_TEMPLATE is used for executing enterprise reports.
Activities
To set your own Web template as a standard Web template for ad-hoc analysis, enter the technical name of the Web template under Ad-hoc Analysis. If you do not specify anything, the delivered standard Web template (0ANALYSIS_PATTERN) will be used for ad-hoc analysis.
To set your own Web template as a standard Web template for BEx Broadcasting, enter the technical name of the Web templates under Broadcasting.
To set your own Web template as a standard Web template for BEx Broadcasting for queries for the generation of documents, enter the technical name of the Web templates under Query Precalculation.
To set your own Web template as a standard Web template for reports, enter the technical name of the Web template under Enterpr. Reports.
Note that if you change settings, you have to restart the J2EE Engine before the changes become effective.
Regards,
Kams

Generate txt output using a program unit in web report (OAS 10g)

Hi Everyone.
I have a c/s report (6i) which generates a txt file in a program unit using TEXT_IO package. I need to move this report to web (Reports 10g) and publishing it in OAS 10g. I've done that (without the text file generation), I can see the report on the browser in PDF Format and works fine... but, I still have a problem... when I use Text_io package, the c/s version of the report in 10g runs an generates the output.txt file but when I move it to web I got an error in the before report trigger (in which I invoke the program unit sp_generate_txt)
I looked around for a solution and I just find the usage of webutil package, but as you know, webutil package is only usable in Forms.
Any Ideas on how can I solve this problem?

Hello,
TEXT_IO can be used in Reports deployed on the web.
The difference with Client /Server is the fact that the file create by TEXT_IO will be created on the "Middle Tier Server" and not on the Client.
Regards

Production schedule report/Standard v/s actual report

Dear experts,
Need two standard report for
1) Production schedule report- production during the perion and their cost component and items break up
2) Standard v/s actual report - Standard defined for material and actually consumed in term of qty and Cost for material and production order.
regards
RR

Hi ajay,
Thanks for your valuable advice,
I did all the changes mentioned in thread.
Cost component wise production target cost and actual cost is coming.
Same way i did it for qty.but my actual qty of production order is not coming but input qty is coming.
Option selected for output qty and same is not coming in report
key figure-output qty
value type-4actual
version-770IVERS
Option selected for input qty and qty is coming in reports also
key figure-input qty
value type-5target
target cost version-790SVERS
Need to ask one more question,Shall i create separate cost component for FG cogm a/c?.my fg cogm and settlement a/c is same.
and also how to extract all data(cost component wise) in excel for all orderwise/material wise
reards
RR

Error message "397819" for a Discoverer report

Please assist me,When I am opening a particular Discoverer report I am getting a error message as "397819" .What can be the reason and how to resolve it?
I am giving the system details:
Oracle Database 11g Enterprise Edition release 11.2.0.1.0
Oracle BI Discoverer Administrator version 11.1.1.3.0
Oracle BI Discoverer Plus 10g(10.1.2.54.25)
Oracle E-Business Suite version 12.1.2
Windows Server 2008 R2 Standard Service Pack 1
This error is displayed for only 1 report for all users from all browser .
Edited by: 934255 on Jun 4, 2012 4:04 AM

Only this error number is being shown and even when I am trying to view the sql from Tool-> Show SQL just that error no. is getting displayed.I am giving the system details:
Oracle Database 11g Enterprise Edition release 11.2.0.1.0
Oracle BI Discoverer Administrator version 11.1.1.3.0
Oracle BI Discoverer Plus 10g(10.1.2.54.25)
Oracle E-Business Suite version 12.1.2
Windows Server 2008 R2 Standard Service Pack 1.
Please resolve this problem.

Error in report generation-Load report failed

I have installed crystal reports for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
This works fine in development and testing but when moved to production we are having issues.
I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
Please help.

Hi Don,
The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
Does it mean that there is a problem in the connectivity?
I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
Is there any fix which can applied to the server to get this issue resolved?
Cheers
Nithya.

Error in generating a report group in Report Painter

Hi,
I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
Thanks,
Louie

There's no error when I generate the same report in a new created group as well as when I generate the existting report group without the new created report.
Information on where terminated
    The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
     in "FILL_RANGES_FROM_SET".
    The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
    The termination occurred in line 92457 of the source code of the (Include)
     program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
    of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
     the editor 924570).
Louie

Output error in standard report to z report

Similar Messages

Maybe you are looking for