Output triggered to  wrong vendor

Hi experts,
I have created a PO on vendor 1234 and there are two condition records maintained for this vendor.  Outputs have triggered for both the condition records.  Now, the issue is, in addition to this, outputs have also triggered for another vendor 2345, for whom i have not maintained the condition records.  I cannot take this as incoonsistency also, because, this has happened twice within a gap of one week.  Both times, output has triggered for the same wrong vendor.
I am not able to understand the reason.
Please help me as to what could be the possible reason for this.
Thanks in advance.
Regards
Radha Krishna
Edited by: Madineedi_Radhakrishna on Dec 10, 2009 2:39 PM

Hi Ramesh,
Thank you for your response.
The issue is not related to partner functions.  Because there is no relation between the two vendors.  The wrong vendor is not maintained as a partner in the actual vendor.
It has happened twice in the production. 
We are not able to simulate the issue in testing environment also.
Aslo raised a note to SAP, but they could not do anything, as the issue could not be reproduced.
Please let me know if there is any other probability for the issue.
Thanks in advance.
Regards
Radha Krishna

Similar Messages

  • Input Tax and Output Tax calculating wrong figures

    Hi,
    I have created Input Tax and Output Tax codes in SAP.
    Input Tax- 3%
    Output Tax- 4%
    All the configuration is done as required. But when I am posting the Purchase and Sales Invoice, the tax amount is not calculating correctly.
    For example:
    Input Tax Calculation should be:
    Vendor A/C.............. Cr 30000-
    Expense A/C............ Dr 29100
    Input Tax A/C............ Dr 900 (@3% on 30000)
    Input Tax Calculation in SAP:
    Vendor A/C.............. Cr 30000-
    Expense A/C............ Dr 29126.21
    Input Tax A/C............ Dr 873.79 (@3% on 30000)
    The same is happening to Output Tax transactions.
    Please advice.

    My understanding about the Input Tax and Output Tax was wrong. In the issue reported
    Input Tax Calculation should be:
    Vendor A/C.............. Cr 30000-
    Expense A/C............ Dr 29100
    Input Tax A/C............ Dr 900 (@3% on 30000)---my understanding was wrong.
    Input Tax 3% should be charged on Expense amount, in this case Rs 30000. But because in the editing option calculate tax on net amount option was not selected, hence SAP was giving the below entry, which is correct as well.
    Vendor A/C.............. Cr 30000-
    Expense A/C............ Dr 29126.21
    Input Tax A/C............ Dr 873.79 (@3% on 29126.21) which is correct.
    Hence, the Vendor amount should be Expense + Input Tax= 30000 * 3%=900 + 30000 (expense) = 30900.
    Correct Entry should be:
    Vendor A/C...............Cr 30900
    Expense A/C............Dr 30000
    Input Tax A/C............Dr 900
    Resolved. Pankaj has given the correct answer.

  • Wrong vendor selection while shopping from vendors catalog

    Hi,
    Shopping cart has been created visiting vendors catalog but system created shopping cart on wrong vendor. This issue is not frequent but need to analysis/fix.
    For example, selected the items in Dell catalog but in shopping cart the vendor is CDW.
    Will appreciate your help if any one have faced such issue. We are on SRM 7.0.
    Thanks
    Jayashree.

    Hi Jayashree,
    Please check the supplier number under : Strategic Purchasing --> Business partner in purchaser log in for which you want to create the SC from catalog and assign that number of supplier to catalog item in data manager.
    this will solve your issue.
    Thanks
    Ravi

  • Wrong Vendor in MIRO

    Hi Experts,
    We have faced a problem where we have posted miro in wrong vendor code whereas actual vendor in PO was different. How it happened, how it can be controlled. Is there any system message available to control this.
    Full points for helping answers.
    Regards
    GR

    Hi,
      If you have done the invoice w.r.to PO, it would have picked the correct vendor. So, delete the invoice in tcode MR8M and do invoice w.r.to PO again.
    Regards,
    Prasath

  • Wrong vendor

    I'm facing a issue regarding PO with wrong vendor, the problem is the PO good receipt already and the goods was delivered to customer. But two months later, the merch. told me that the vendor is wrong. I would like to know, in my case, how to solve the problem, so than account dept can pay to correct vendor. Thanks!

    This is quite strange, how you have received goods from the Wrong Vendor???
    You need to Cancel the GRN & Close the PO with Deletion indicator.
    and create a new PO with Correct Vendor and do GRN..
    OR
    You need to maintain the Correct Vendor as an Invoice Party  in the Existing Vendor/ in existing Purcahse order..
    So that you can pay to the Invoice party instead of Vendor of PO..

  • GRPO booked to Wrong Vendor

    hi all,
    Our client has booked GRPO to wrong vendor X instead of Y,Stock of item get consumed in production.
    Now Vendor Y sent invoice for payment,How to Solve this problem ?
    Jeyakanthan

    Pls. find below the step
    Go to BP master data
    Select the GRPO vendor
    go to account tab
    check payment consolidation radio button
    enter Invoice Vendor in consolidated BP field
    Post the Invoice on the basis of GRPO
    System will transfer invoice value o consolidated Vendor.
    Pls verify the entry.
    The go to BP master data
    select the GRPO vendor
    go to accounttab
    remove BP consolidation.
    Regards
    Kamlesh

  • Shipment have multiple output triggered on specific date and specific time.

    Hi Experts,
    We use a custom transaction for a specific customer/ partner shipments. the transaction work with help of batch jobs and idocs. we create a shipment through VT01N, after creation, we use the custom transaction to complete rest of steps - planning- execution- shipping off.
    the transaction is capable of producing an i doc for each output we trigger. outbound idoc goes to other party system through SAP PI. the third party system is a web based system.
    Output is configured to issue multiple output.
    we noticed a strange thing last week.
    Several shipment processed on the day had 7 outputs triggered each seperated by 3 seconds/ 4 seconds and 5 seconds. error doesnt show any patterns.
    when we see the outputs, 1st output doesnt have manually changed indicator tick. but rest of 6 has the indicator tick.
    i have checked all possible option from my side.
    need your opinion about what could be the cause.
    Raghavan

    Question unanswered

  • STPPOD triggered sending wrong material from SAP to SNC

    Our process behave in this way when we receive a goods into our R/3, Proof of Delivery sent to SNC to update them that we have receipt the goods. And our system has setup in a way that only certain material and vendor are require to send GR feedback to SNC.   For some reason, our system will send IDOC of every inbound delivery (include all kinds of materials and vendors) to SNC whenever an inbound doc is created. This cause wrong update of Proof of delivery to SNC of un-related inbound document (i.e. unrelated vendor/Material).
    I am wondering if the error cuased by the current setup of inbound delivery output type table in MN24 in which we only put in Delivery Type ==>  "EL", Funct ==>"VN", Partner ==> empty , Medium = A, Date/Time = 4, "Language = EN? This cause all inbound doc with EL will have OPOD get triggered?
    Or is it my current WE20 setup?
    A - Partner Type LS
    Partner No. = PI Production,
    Partner Type =LS (concist of STPPOD as message type) in the outbound parameter table.
    B - Partner Type LI
    Parnter No. = Vendor A
    Partner Type =LI (concist of STPPOD as message type) in the outbound parameter table.
    Please help thanks Tuffy

    Hi Tuffy,
    If you use VL31N/VL32N to send GR which means it will triggered STPPOD IDoc for which ASN is created.
    Now when you do the GR using MIGO and execute RSMIPROACT again it will pick this GR to SNC because of this it will double the GR quantity in SNC.
    You can use RSMIPROACT report for SMI and DR process for demand and stock information but not for GR if you are using VL31N/VL32N to send GR information to SNC.
    My Question: ok if I will to remove the partner type LI setting by using A method (i.e. our initial method), may I know if I need to insert the partner no (i.e. PI production) in the MN23 output condition table?
    Yes,If you are going to use LS then you need to remove LI partner type and insert the PI partner no in MN24 output table.
    My Question: Previously Sandeep was suggesting using LI for the specific vendor master Number to create as partner no.in WE20, and now my system setup for MN23 include this particular vendor master No. (i.e. NOT the PI production), do you think it will solve this problem?
    I am not sure whether it will work or not.
    If your requirement is to automate vendor wise then it is also possible  using tcode:MN24 enter ouput type OPOD and select delivery type/vendor wise enter below detail:
    Vendor;<Your vendor code>
    Partner function:LS
    Partner no:PI partner no
    Medium:6
    mode:4 (immediate send)
    Lang:EN
    save the setting.
    I have configure as GR update to SNC with LS partner type and it is working fine without any issues.
    Let me know for any clarification.
    Regrads,
    Nikhil

  • EDI output triggered for old PO

    Hello All,
      on 09.09.2014, EDI ( output type NEU, transmission medium 6) output type has triggered for more than 700 PO's which has been created in 2012 for several vendors and sent to supplier again as a duplicate copy. Suppliers are reaching client for this and some suppliers started sending goods which client has not ordered. There are no changes available in PO and users have not edited those PO's. There is no batch job scheduled to trigger output type. How else is possible for triggering output type in old PO. Please share your ideas.
    Regards,
    Prasath J

    Ask your basis team when the last copy was done. if the copy was done between creation date and now, then the PO in the copy system will show how the PO was before the incident happened.
    This way you can see if there were unprocessed messages.
    Message records do not create by itself in old POs, And 700 cases do not speak for a manual activity either,especially as you are saying that you have no change records.
    Maybe there was something done programatically  to solve an earlier problem from you:
    PO Output Message Disappears

  • Wrong Vendor Invoice Posting Due To Wrong Excise Tax Code

    Hi:
    We have created a Purchase Order as per below:
    Qty     10
    Price     100
    Value     1000
    Excsie 10%     0
    Cess     0
    SECess     0
    Value+Excise     1000
    VAT 5%     50
    ValueExciseVAT     1050
    (Please note that the PO was to be created in the following fashion as the Material was excisable)
    Qty     10
    Price     100
    Value     1000
    Excsie 10%     100
    Cess     2
    SECess     1
    Value+Excise     1103
    VAT 5%     55.15
    ValueExciseVAT     1158.15
    We did the Goods Receipt and the FI Document is as follows:
    24340000     Paper Stock     BSX     1,000.00
    13110100     GR/IR-ext proc     WRX     1,000.00-
    We did the Vendor Invoice Posting as follows:
    100183     SIEGWERK INDIA PVT LTD (SICPA)     KBS     1,050.00-
    13110100     GR/IR-ext proc     WRX     1,000.00
    24638100     VAT Recoverable     JP5     50.00
    The Material was issued to Cost Centre
    Later at the time of Excise Invoice posting, we came to know that the Tax Code in the Purchase Order was wrong. Here in our case, we have created separate Tax Code based on Excise Percentage. For example, V1 for VAT 5%, E1 for VAT %+Excise 10.3%.
    To post the excise invoice, we changed the Tax Code in the Purchase Order and did the Excise Posting as follows:
    24820020     CENVAT Inp SHEcess     1.00
    24820000     CENVAT Inp BED     100.00
    24820010     CENVAT InpEcess     2.00
    13113920     CENVAT clearing     103.00-
    My Question:
    a. Is this the correct way?
    b. What about the following FI Entries which got generated when we do the MIRO with actual Tax Code:
    100183     SIEGWERK INDIA PVT LTD (SICPA)     KBS     1,158.15-
    13110100     GR/IR-ext proc     WRX     1,000.00
    13113920     CENVAT clearing     JI1     100.00
    13113920     CENVAT clearing     VS9     2.00
    13113920     CENVAT clearing     JI6     1.00
    24638100     VAT Recoverable     JP5     55.15
    Please guide.
    Regards,

    Thanks Sanjoo for the reply.
    Here my worry is the all the postings have been made in SAP in Production Client.
    The User has already done the postings for MIRO & J1IEX without informing to us, and the volume of transactions is huge.
    We are in the back-log mode and at this stage, we can't go for any reversal . I am Just exploring the alternatives.
    Our MM & FI Users are little bit smart, when ever they do some mistake, they simply say "we will pass a JV" and we are not able to educate them that the JV is not a Solution. Please guide.
    Regards,
    PK

  • Capture preset anamorphic - output aspect ratio wrong

    My capture preset was dv pal anamorphic as the footage was taken on a widescreen camera. Footage looks fine in FCP6, but when I export a QT file, the aspect ratio is wrong. Why should this be and how do I correct it?

    Hi Simon,
    this is because Quicktime is showing the whole file, squashed.
    What is your final destination? DVD? Web? Presentation? That will depend on how you will output the file. If you are planning to play it on an SD TV, go to your timeline and make sure you change the ratio to SD with a widescreen mask.
    If you want widescreen to play correctly on a standard def tv, then you need to add the mask to it. If you are planning to put it on a SD tv with widescreen, the TV's aspect ration is changed to accomodate the file. So it is playing back correctly, it is the TV that will change. This is why dvds often have two different discs, one for SD and one for wide screen.
    I hope this is helpful.

  • How to do a digital output triggered by the falling edge of a clock?

    Hello !
    I would like to do a digital output (on a given line of a pci 6602 card) triggered by the falling edge of a clock.
    More precisely, a pulse train is generated. I have to output each bit of a variable (first, the LSB ; then, the others bits, until the MSB), each bit being transfered on a falling edge of the pulse train. How could I do that, please ?
    Thank you for helping me.
    Julian.

    see the following link (other forum same subject)
    http://forums.ni.com/ni/board/message?board.id=40&message.id=1634

  • Automatic configuration of NEU output types for PO Vendor and its partners

    Hi All,
    I have requirement where I need need to send IDOC to PO Vendor and its partners at the same time when PO is created and changed. I need to get NEU output types for Vendor and Partners in messages automatically. Can any one guide me how to get this functionality. Please help me with step by step process. I am new to MM.
    Thanks,
    Ravi

    To attach output type to purchase order :
    Go to NACE , Select Application EF ( Purchase Order)  and Click on Condition Records button.
    In a POP UP window double click NEU  and then select the right Key Combination and maintain right transmission medium and output devide details.

  • PO output not to default vendor master

    Hi experts,
    We run SRM5.0/Server5.5 in extended classic scenario.
    We changed SC create with customer fields, where the employee can manually enter the e-mail or fax address as this information is usually not up-to-date in vendor master data.
    The information is passed on to the purchase order, but when we process the output the SAP standard output programm still is going to the vendor master data and picks the e-mail or fax address there instead of using the document specific data.
    Does anyone of you know how we could solve the requirement? We want to change the SAP standard programm that should pick the e-mail or fax from the PO-document and not from the vendor master.
    Many thanks for any suggestions.
    Regards,
    Corinne

    Hi Corinne,
    We are also on SRM_SERVER 550, SP11, ECS Scenario.
    We are having a similar requirement where we need to provide custom fields in the shopping cart for Fax number, Telephone number and Email id. These fields will need to be mapped to the standard fields in the SRM PO for output as well as for display in the PO vendor address details.
    We find that inspite of mapping these fields in the BBP_DOC_CHANGE_BADI, method BBP_PO_CHANGE these fields are not appearing on the PO vendor address. The PO vendor address in SRM PO is defaulting from the vendor master. Also the output tab in the Header is defaulting from vendor master. This means, the changes which the requester did in the SC for fields Fax number, email id etc are not getting copied to the SRM PO for the vendor address.
    We are mapping the SC fields to PO fields of TEL1_NUMBR, FAX_NUMBER and E_MAIL in structure BBP_PDS_PARTNER for the partner function 19 (vendor).
    Can you please let me know if you were able to resolve your issue and what was the resolution?
    Regards,
    Srivatsan

  • PO output medium XML in Vendor data missing

    When we try to create a BP as vendor, we dont see XML as the output in Send Medium in the Co. code tab.
    Is there anything to be configured so that XML shows up as the output medium ? We only see Fax, Mail, Print.
    -Bakulesh

    Hi
    Please go through this ->
    <b>You should logon as Buyer profile</b>
    <u>Following roles should be added to the user profile,
    SAP_EC_BBP_PURCHASER
    SAP_EC_BBP_ST_PURCHASER
    SAP_BBP_STAL_PURCHASE_MANAGER
    SAP_BBP_STAL_STRAT_PURCHASER</u>
    <b>Instead of logging via BP Transaction, go for transaction - BBPMAININT (Edit Business Partner - link will appear on the Left hand side of the SRM Web page after logon screen, once the roles have been added to the user)</b>
    <b><u>Other SAP OSS notes of interest -></u></b>
    <u>Note 885593 - SRM 5.0 SP02: Incorrect output medium and change impossible
    Note 1028388 - User settings for output medium is not saved.
    Note 365276 - Problems when sending EBP XML documents</u>
    <u>Related OSS Notes -></u>
    <u>Note 575159 - Authorization error for HTTP communication via BC
    516869 - Sending EBP XML to BC by HTTP: Error Authorization Required
    377600 - Not possible to send an invoice in EBP XML format per http
    377589 - An invoice in EBP XML format cannot be sent via FTP
    370906 - PO or Invoice cannot be sent per https in EBP XML format
    370899 - Error when sending PO or invoice per http in EBP XML format
    502938 3.0: Customizing for the output of purchase orders
    380577 EBP 1.0: Send PO XML via MarketConnect
    Note 564826 EBP: Customizing for the output of EBP documents</u>
    Hope this will help.
    Regards
    - Atul

Maybe you are looking for