Over 2 Hours To Export a 10 Minute Video Even With Other Editing Software

Hi, I am having a problem with EVERY edititing software I have used. Recently that is. Anyway heres the deal. I got a new computer and it has been an amazing PC. It has a sticker on the front that says HD video editing as in it supports it. Which it very well does. Within the last couple weeks, I have had problems with editing my videos. I usually render 5 to 15 minute videos since I do YouTube. That would take between 10 and 30 minutes. Now, these videos are taking almost 3 hours give or take just to finish rendering. I have no idea why. It all started when I changed the settings in MSCONFIG to have maximum memory. I restarted my PC and got a hardware error. So I went into safe mode and undid what I had done. I also took out the RAM, and CPU to see if that was a problem. I then put it back in of course. I don't know every knick and cranny of Adobe premiere so please be very descriptive. I also remember that I was having trouble with the fan of my CPU. I couldn't get it to lock back down on the mother board. Could that be a problem? It isn't lock in on all 4 parts. Only 2 I believe. Any help is appreciated. Thanks in advance.

Dumb me haha, I didn't even think of puttin in system info. I believe thats what you were asking? I am using Adobe Premiere CS6. I don't know what version though.
My system specs are as followed
Pentium Dual Core CPU E6300 @2.80GHz 2.79GHz
RAM: 4.00 GB
64 Bit Windows 7
Nivida Geforce 210 Video Card
The video files I render are M2TS and they are recorded with the Haupaugge Colosus @ 1280x720 in Arcsoft Total Media ShowBiz.
I render them with adobe premiere in H.264 in 1280x720 @29.97 FPS with a Bit rate of 2MB/s

Similar Messages

Should it take 7+ hours to export my 2 minute video?

I converted footage from my flip cam to apple ProRes 422 in Quicktime 7. I did some quick edits, threw a few fllters on there & made a minute & a half video. Iopted for the simple share feature to export the movie for youtube. It’s been transcoding for 7+ hours. Should it really take this long? Or should I try exporting it some other way?

No, it shoudln't take that long.
Yes, try something else.
Exactly what you're doing wrong is difficult to tell from the post but the most liekly cause is FCP is going back tot eh original media, doing a frame-by-frame conversion, and then rendering and then attempting to transcode to the YT target.
Export a self-contained movie, use Compressor to arrive at the YT specs or bring your movie back into an empty sequence, share to YT from that.
bogiesan

Why does it take 5 hours to export a 7 minute video?

I'm using compressor, with the iPod settings for my footage I took with my canon hv20. I know it's a huge file but it shouldn't take THIS long should it?

Because HDV us a bee-atch?
Patrick

Final Cut Pro takes time to share/export a 40 minute video

I bought a brand new new Macbook Pro (4 GB RAM, i5, HD 500 GB (300 GB available) Mid 2012 model and it takes 3-4 hours to share/export a 40 minute video without any effects applied on the clips. I have another Macbook Pro, same model and same specs and it just takes an hour to render the same video/project which I think is reasonable time.
Video files are from my Canon 60d camera which are .mov files. I usually export my projects to H.264 Video and AAC. (Share>Master File)
I don't have any problem exporting/sharing a 3 minute video with effects applied on the clips on my macbook Pro where I'm having a problem with because it has the same export/share time with my other MBP. It takes 5 minutes to share/export a 3 minute video which I think is reasonable. The problem is why my new Macbook Pro takes time to share/export a project with a video duration of 30-40 minutes compared to my other Macbook Pro.
Thank you for your help!
Final Cut Pro version: 10.0.8
Macbook: OS X 10.9.2

If you have two MBPs with exactly the same specs (including GPU) – and you have comparable free space on both system drives –and comparable free space on any media drives – then verify that your perceptions of their exporting times are different by doing a test with identical projects media and export settings – and ith no other apps running. If you confirm that one is much faster than the other, I'd suspect the GPU. Also open Activity Monitor to see what's being reported – particularly to see whether there are differences in the way memory is being used.
Russ

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

Exported a 3 minute video from iMovie to Quicktime, saved on my desktop. It started saving as INDIVIDUAL files, as in about 5400! Entire system froze, completely unresponsive. Powered off 3 times now, it comes on and displays my screen saver but nothing

Exported a 3 minute video from iMovie into Quicktime, saved to desktop. System started saving INDIVIDUAL frames instead and entire system froze. Powered off and on twice - screensaver appears, but that's it - nothing else is accessible

Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
You may now be able to log in and move the files off the Desktop. Then reboot as usual.

Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant

why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.

H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

In future Iphone4 will support video chatting with other Mobile phone

Hi ,
Whether iphone4 will allow video chatting with other Mobile phones like Nokia,Samsung,etc..,in future kindly clarify

Apple already announced, as an earlier poster stated, that they have made the FaceTime spec/protocol available to anyone who wants to use it. Apple doesn't have to do anything.

Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

First: How are you exporting? Are you using the Share feature or Send to Compressor?
Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
Russ

In attempt to burn blu-ray, I get QuickTime error 0. Takes hours to export a 7 minute movie from timeline, then get notice it fails. What's going on here?

New problem just started 24 hours ago. When I try to export from the time line to create a QuickTime file, a 7 minute movie on time line takes 3 hours to export and then the export fails, where as a few days ago, that export would take about 10 minutes at most. I get the same failure notice when I try to share to blu-ray, DVD, or Vimeo. Tried to use compressor, no such luck as compressor failed to make a .mov file. I get QuickTime error 0 message about 5 minutes into trying to share to Blu-Ray now. Does anyone know what is going on here? I'm running latest update of Snow Leopard on an intel Mac Pro and the latest update to Final Cut Pro X. I've also installed QT 7.6.6 to use in creating time lapse movie files.

Same problem here, too. Final Cut Pro X 10.0.3 on OS 10.6.8. However, it is only doing it on ONE of my projects. A 4-second test project burned successfully.
I'm actually going to use iDVD to burn copies for a few people, so I only need the movie file from FCPX.
Would someone please post best export settings for use on a DVD? In FCPX, the project is in HD (1080p) with all media optimized to ProRes 442. I know it will have to be down-sampled to DVD resolution, but I've always been curious to know what settings will result produce the best possible quality in DVD resolution.
Thank you!
Bart

I'm trying to export a 3 minutes video clip through the Share option and i"m getting "Error compiling movie. Unknown error" announcement.

I Need to export a 3 min. video clip as 1080p50 5.1

DovSolomon
What version of Premiere Elements are you using and on what computer operating system is it running?
What are the properties of your source media and what project preset are you setting to match the properties of your source media?
There is no 1080p50 5.1 project preset in any version of Premiere Elements.
Please see the following for creating your own 1080p50 5.1 project preset and exporting it as 1080p50 5.1.
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p50 or 1080p60 file with 5.1 Channel Audio
Let us determine what your sources are, how you are setting up the project, and then we can look microscopically
into the Timeline content for flaw(s) that might be triggering your error message.
We will be watching for your reply.
Thank you.
ATR

I made a movie in Final Cut Pro, it is about an hour long. Now that I am finished with the editing, I need to export it. However when I go to export ("Share", then "Export Using Compressor...") nothing happens.

This movie is for a TV show, and this problem is very urgent. Help Please.

I am having a similar problem. I cannot export a 4 min. video of to imov or DVD, Youtube, ext. under Share. Under imov. it takes about 3 hrs to finish then I get a message File Cannot Be Opened. It leaves and imov icon but when I select it, a message reads File May Be Damaged. Under DVD it says The File Is To Large For Disk.
If I need to reinstall Final Cut Pro X how do I go about doing that?
Thanks

How to video call with other phone using Iphone 4??

Hii
Anant Patel here.
How to use iphone 4 for video call to other phone like nokia or others.??

Skype, if the other phones support skype.

How do I share video clips with others using the Starter Edition?

I have many videos on my Photoshop Album Starter Edition account. Is there a way to share videos using the Starter Edition program?

I wonder the same thing. The icloud.com web page is pretty rediculous as of now. What's the point of the page? Ive got an iphone that has my email, calendar, photos, etc.. what does the icloud page do? I think it's a work in progress cause I dont see a need to log onto it since my devices have all the info on it already? Yes, Id like to be able to log onto the icloud from work and see the pictures in my cloud.

I cant video chat with other ichat users. ! :O

I have a mac mini with snow leopard and my ichat was working since i started using it. Under my green video camera icon there were like 3 or 4 panels or however many there are regularly. Now the only panel is the video camera and i cant vchat with other ichat users. but when i disable the camera all the panels appear. this happened after i had my macbook ichat and mac mini ichat on at the same time.
HELP PLEASEEE!

Hi,
Welcome to the  Discussions
Scenario 1
Next to your Own Buddy icon at the top of the Buddy list your own Video icon should be "Stacked" if you can do Multi-way Video Chats.
As Audio chat take less bandwidth it is implied you can do Multi-way Audio Chats.
If your Icon becomes a single "Flat" one then so will your Buddies as you will only be able to Video Chat to them one at a time.
If you can Multi-way Chat but a Buddy can not (most likely a AIM on PC Buddy) then they will show a "Flat" iCon.
Resized "Flat" pic
Resized "Stacked" pic
Scenario 2
However these icons appear in a group at the bottom of the Buddy List, and are dark like this when a Buddy is highlighted.
From what you posted I am not entirely clear which part you are talking about.
I would rather be clear before we proceed.
Can you start though with a plain Shut down and reboot of the computer and then start up iChat ?
This will get iChat to recheck the Bandwidth (portion of your Internet Connection) it can "See" and it may do better now the other computer is not doing a Video chat.
8:17 PM Wednesday; July 28, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Over 2 Hours To Export a 10 Minute Video Even With Other Editing Software

Similar Messages

Maybe you are looking for