Over delivery of a sales order-status still shows "not delivered"

Hi Friends
I have a problem with sales order . Total quantity in order is 10, even then system allows me to make 2 or more deliveries of total with more than 10 quantity .
Following option I have tested but all in vain.
1. In copy control at item level ( item category is TAN) document flow box is checked and Pos./neg. quantity column has value "0". If I take here "" then system don't allow me to make partial deliveries i.e 2 deliveries of 5 quantity each. It says " there is no quantity available for delivery or the item is not relevant for delivery.  I can make only one delivery with 10 or less quantity with "" sign
If I take "O" in Pos./neg. quantity field then it allows me make as many partial delvery with more than 10 quantity, which is wrong
Order status always shows " No delivery" even if deliveries made and PGI done
2. In item category checked complition rule field with "A", "B" and "c" option still no effect and document flow shows "being processed "
Pls let me know whts the problem
Thanks

Maintain value + (plus) in the field Pos/Neg quantity at item level in the copy control settings (t.code VTLA). After making the settings, create a new sales order and test.
Regards,

Similar Messages

  • Sales Order status still "Being processed" after invoice (3rd party sales)

    Dear SD gurus,
    Here's what is done so far:
    1. Create a sales order with one line (TAS item cat).
    2. Trigger PR to be created. Approved the PR.
    3. Create Purchase Order. Approve the PO.
    4. Perform MIRO.
    5. Create sales invoice based on sales order (billing based on supplier invoice).
    6. Invoice released to accounting
    Now, when I checked the sales order status, it's still showing "Being processed". However, invoice have already been created and released. I'm just wondering what else have I done wrongly. I believe the status should show "Completed" as well otherwise this order will keep showing up as outstanding in my sales order listing report.
    Anyone got any ideas?

    SAM
    I had a looked at both the SAP Notes provided. Doesn't really apply in my situation. The Sales order was for 10 qty. My PR for 10 qty and I have also done a MIRO for 10 qty. even my sales invoice was for 10 qty.
    I do not want to configure it to follow the PO quantity because I need a control where only vendor has delivered the products to the customer only then I should invoice the customer accordingly. If I allow the invoice to be created based on the PO quantity then the control factor will be lost.
    I have yet to try the program that you recommended... will try that shortly.
    And yes ... since I'm using the standard sap TAS item cat ... the "relevance for delivery" is already turned off and the billing is "F"

  • Sales order status to show as Complete only after PGI

    Hello
    I have one requirement. Now currently in sales order status of the order is showing complete once the item being delivered.
    But our requirement is that, the status of the order should be shown complete only when PGI is done not after delivery.
    I would like to know if any exit or any other program will help us in finding this solution
    Thanks in advance
    Naveen

    Dear Naveen,
    Sales order status depend on Item Category completion rule, please check on VOV7 for your sales order item category. In standard SAP, below rule can we define with item category:
    Not relevant for completion
    A
    Item is completed with the first reference
    B
    Item is completed after full quantity has been referenced
    C
    Item is completed after the target qty is fully referenced
    D
    Item is referenced via contract release
    E
    Item is completed after full target value is referenced
    Hope it will helpful for you.
    Regards,
    Shatrughan Singh

  • Create delivery automatically when sales order is created but not invoice??

    Hi,
    I have a requirement where in, it should create delivery (also issue) automatically when i create sales order, but it should not create the invoice automatically. I am going to do the invoice manually from the delivery document. Can you suggest me how to do this??
    Thanks
    Ghanesh

    Hi,
      If the sales document type is not relavant for Cash sale and the document type is used globally in the business then if for some specific conditions like distribution channel or plant or for division if u want to carry out the immediate delivery creation and PGI, use the below user exits and Bapi's
    The below user exit is used to export the sales order details to capture the required checking cond such as sal org,dist ch,div,plant,etc
    Include MV45AFZZ
    FORM USEREXIT_SAVE_DOCUMENT.
    Include MV45AFZA
    FORM -USEREXIT_REFRESH_DOCUMENT.
    BAPI_ISAORDER_GETDETAILEDLIST
    BAPI_OUTB_DELIVERY_CREATE_SLS
    SD_DELIVERY_UPDATE_PICKING
    BAPI_OUB_DELIVERY_CONFIRM_DEC
    Regards,
    Gopal.

  • Userexit to limit over delivery tolerance in Sales order

    Hi,
    I want to limit delivery  over tolerance to particular range while creating sales order or change in sales order. so anyone can tell me in which userexit i can do this.
    Awaiting for earlier response.
    Thanks in advance.
    Regards,
    Piyush Gajera

    hi
    Here is the list of user exit related to VL01N :
    V02V0001   - Sales area determination for stock transport order 
    V02V0002   - User exit for storage location determination 
    V02V0003   - User exit for gate + matl staging area determination 
    V02V0004   - User Exit for Staging Area Determination (Item) 
    V50PSTAT  - Delivery: Item Status Calculation 
    V50Q0001   - Delivery Monitor: User Exits for Filling Display Fields
    V50R0001    -  Collective processing for delivery creation 
    V50R0002    - Collective processing for delivery creation 
    V50R0004    - Calculation of Stock for POs for Shipping Due Date List
    V50S0001    - User Exits for Delivery Processing 
    V53C0001    - Rough workload calculation in time per item 
    V53C0002    - W&S: RWE enhancement - shipping material type/time slot
    V53W0001   - User exits for creating picking waves 
    VMDE0001  - Shipping Interface: Error Handling - Inbound IDoc 
    VMDE0002  - Shipping Interface: Message PICKSD (Picking, Outbound) 
    VMDE0003  - Shipping Interface: Message SDPICK (Picking, Inbound) 
    VMDE0004  - Shipping Interface: Message SDPACK (Packing, Inbound)

  • Due to deleted Sales order line items and Archived Sales order is still showing as Incomplete in BW as Open Order reports because of Incorrect SAP R/3 Rejection Status("A") in VBUP table.

    In a archived saler Order user had deleted Line Item and completed overall sales order. Now this sales order is archived, but it is stll appearing in BW report as open order because of deleted item  with rejection Status is maintained as “A” (Not yet Processed).
    We want to change this status from "A" (Not yet Processed) to "C" as completed.
    I have tried to reload Archive data but due to some limitation I was not able to do it. Also I feel this will like this s not the proper way to do it.
    Could you please help me to correct way to do it???
    Thanks in advance....

    Hi Vaibhav,
    If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup  or navigation attribute.
    Just my views I am sharing .
    Thanks,
    KDJ

  • Sales Order status is showing open

    Hi,
    I have created one Sales Order and completed invoice. The accounting document is posted.
    Here the status of Sales Order,Invoice,accounting document is showing completed & cleared in the document flow.
    I have created Credit memo request with reference to above Invoice and released the document to accounting
    If you check the Document flow all the documents are in completed & Cleared status
    But when i  created the Credit memo request with reference to the above Sales Order and completed the invoice here when i check the document flow the Sales Order is status is  Open and rest all the documents status as Completed.
    I have checked the copy controls and also the document types but defaulted to get the status of Sales Order into Completed.
    Could any one suggest me where i can check such that the status of Sales Order becomes complete

    Hi Krishnan,
    I checked the Item Category of Credit memo request and changes the completion rule from B to C vise versa, but still the status of the document is showing as Open.
    I am trying to check the document types, Item categories and copy controls.
    If any one having any idea on this one could you please revert back the same.
    Thank you for your support.
    Best Regards
    Amajthpasha

  • Sales order status showing Completed, after I do partial delivery

    Dear All, Good morning
    I'm Creating an order for 5 quantities and creating a delivery for 2 Qty',
    my problem here is the sales order status is showing complete and I'm unable to create a delivery for the remaining Qty.
    I've checked with the Copy controls for OR - LR(T.code: VTLA) , for your reference I'm showing it below,
    FOR HEADER
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Copy Item Number is not CHECKED
    FOR ITEM
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Update Document Flow is CHECKED & Positive/Negative Qty
    Please its urgent.
    Thanks & Regards

    hello, friend.
    in addition to what the others have said, please check your customer master, particularly in the Sales Area Data > Shipping tab.  look at the partial deliveries.  there may have been settings that tell the system if a delivery has been created with reference to the sales order, the order will be completed even if the quantity is only partially delivered.  if the entry in the 'partial delivery per item' field is 'B', then this will explain your situation.
    this can also be manually set in the sales order, so you have to take a look at the order as well, at item level.
    regards.

  • Under /Over Delivery Tolerance with Sales Contract

    Hello All,
    Overview: In our current environment we are creating Sales Contracts, then a Subsequent order from the Sales contract. We change the Sales order quantity to desired amount for the time of delivery which the customer is requesting. Also in customer master (XD02) we have delivery tolerance setup for under and over.
    Question: Since we have tolerance setup for the customer.  At delivery time, we picked less from what the sales order originally had and complete the whole process to billing. Does the remaining quantity go back to the sales contract?  Sales order is still showing "Being Processed" Or is not possible to do that with delivery tolerance setup and Sales Contracts?
    Scenario 1: XD02 - Tol. Over/Under set as 5%. Unchecked box "Complete Delivery", "Partial del. Set to "Blank" and Max Partial to "9" for Customer
    Created Sales Contract for quantity 500 Tons--> Created Subsequent Sales order for 25 Tons.
    Delivery: Picked 22 Ton's. Recieved Message" Underdelivery tolerance of 5.0% has been exceeded".
    Completed shipment and billing.
    Sales order shows "being processed" and remaining qty did not go back to original Sales Contract.
    Scenario 2: XD02 - Tol. Over/Under set as 5%. Checked box "Complete Delivery", "Partial del. Set to "B" and Max Partial to "1".
    Created Sales Contract for quantity 500 Tons--> Created Subsequent Sales order for 25 Tons.
    Delivery: Picked 22 Ton's. Recieved Message" Underdelivery tolerance of 5.0% has been exceeded". Acc. To the partial dlv. Agreement, no subsequent delivery can take place
    Completed shipment and billing.
    Sales order shows "Completed", but the remaining quantity did not go back to the original Sales Contract.
    Is possible to have the remaining quantity to go back to the Sales Contract without going back to the Sales order and change the quantity to what was shipped.  Can this be done via configuration?
    Can anyone please shed some light on this.
    Thank you all,
    Nav

    Hi
    Can this be done via configuration?
    To my knowledge...definitely NO. It is not possible through configurations.
    Regarding the two scenarios...you are delivering quantity less than the lower tollerance. It should not happen and if your business process demands it....there is no meaning of maintaining the tollerance limits for the customer. Since the message is a warning message, you are ignoring it and proceeding with the delivery. This message should be an error message and delivery should not be allowed when the tollerance limits are crossed.
    Thanks,
    Ravi

  • Sale order status not getting completed

    Hi Friends,
    I had sales order with milestone billing for which I completed billing, even though sale order status is showing as being processed. The same way with periodic billing also.
    Kindly suggest.
    Kumar

    Dear all,
    I have cleared my actual issue. But the below doubt was regarding the standard SAP.
    Hi All,
    Thank you for your answers. First point is that I hope completion rule is only for quotation and contracts but not for normal sales orders. Second point is that I am using TAO item category which tells order related billing with billing plan. This means there was no delivery, then why schedule line CP (MRP) was assigned to TAO in standard? This is the problem for me. As the schedule line is MRP the system is not completing the status of the sale order even I have completed total quantity and value also. Can anyone tell me why this was assigned like this in statandard?
    Kumar

  • Sales order status ( SO to Shippment)

    Oracle 9i , EBS 11i
    Dear
    Experts
    I am making a report on sales order status, which show all the items in and outs from sales order to shipment. and for that i write one sql to gather all the data from diffirent tabels. it is working fine for some orders but not for all. Main reason is outer join conditions. because items are varey in sales order, po, receving and shipments. all item are not same as in all tables. now i would like to ask
    1- can i make this report on the bases of MTL_MATERIAL_TRANSACTIONS
    so i can get all the statuses of transactions. but how can i find transactions for the specific sales order ??
    2- see my query and give me some idea . how can i correct it ..
    select
    'ITEM',
    a.inventory_item_id, a.segment1, a.description,
    'ORDER' , b.order_number, b.ordered_date, b.order_quantity_uom, nvl(b.ordered_quantity,0) ordered_qty, b.unit_selling_price, b.ordered_quantity*b.unit_selling_price ext_value,
    'PO', c.segment1 po_no, c.currency_code, nvl(c.rate,0) rate, c.list_price_per_unit, c.unit_price, nvl(c.quantity,0) po_qty, c.po_ext_value,
    'RCV', d.receipt_num, nvl(d.quantity_received,0)rcv_qty,
    'SHIP', nvl(e.shipped_quantity,0)ship_qty, nvl(e.unit_price,0), e.currency_code
    from
    (select * from mtl_system_items_b where organization_id=141) a,
    (select
    a.order_number, a.ordered_date, a.sold_to_org_id, a.salesrep_id, a.flow_status_code order_header_status,
    b.flow_status_code order_line_status, b.order_quantity_uom, b.ordered_quantity, b.inventory_item_id,
    b.unit_selling_price, b.ordered_quantity*b.unit_selling_price ext_value, b.unit_cost
    from oe_order_headers_all a, oe_order_lines_all b
    where
    a.header_id=b.header_id ) b,
    (select a.po_header_id, a.segment1, a.vendor_id, a.currency_code, nvl(a.rate,0) rate, a.comments,
    b.item_id, b.list_price_per_unit, b.unit_price, b.quantity,
    case when a.rate is null then b.quantity*b.unit_price else ((b.quantity*b.unit_price)*nvl(a.rate,0)) end po_ext_value
    from po_headers_all a, po_lines_all b
    where
    a.po_header_id=b.po_header_id and a.comments like '%'||:p_oia_no||'%') C,
    (select b.RECEIPT_NUM, a.quantity_received, a.item_id, a.shipment_line_status_code, a.po_header_id from RCV_SHIPMENT_LINES a, RCV_SHIPMENT_HEADERS b
    where A.SHIPMENT_HEADER_ID=b.SHIPMENT_HEADER_ID) d,
    (select source_header_number, inventory_item_id, shipped_quantity, unit_price, currency_code from wsh_delivery_details) e
    where
    b.order_number=:p_oia_no
    and a.inventory_item_id=b.inventory_item_id(+)
    and a.inventory_item_id=c.item_id(+)
    and c.po_header_id=d.po_header_id
    and a.inventory_item_id=d.item_id(+)
    and b.order_number=e.source_header_number
    and a.inventory_item_id(+)=e.inventory_item_id
    its an urgent matter .. any solutions and suggussion would highly appriciatable ..
    regards
    Anwer

    TRy transacton_source and transaction_type.

  • Sale Order Status Change after delivery of materials from projects

    have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
    On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
    Regards,
    Ranjan

    Hi,
    In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
    Thanks & Regards,
    Biplab Ranjan

  • Sales Order Status for Delivery.

    Hi Guys,
    Thanks for answering my previous question. I have been asked to solve another problem for the SD department.
    How can I find out if a sales order is ready to be delivered? Is there a list display where in I can see all open sales orders and the qty of units are ready to be delivered for each of the line items.
    Thank you.

    Hi SRao,
    If you want a list of open orders based on the ATP check, you have to customize a report program based on the transaction VA05 and based on the business requirement. 
    Normally, once the Delivery is created for the sale order fully, then the status of the Sale order would become complete.  If it is partial delivery of the Sale order, then the Sale order would be open. 
    And if you want to take the list of Open orders, you have to necessary prepare a report program with all the Schedule lines and the list of available dates for the line item based on the availability of stock.
    Hope this helps.
    Thanks
    Augustine Ponraj

  • Sale order status showing being processed

    Dear Friends,
    I am working in SAP ECC 6.0
    My sale order Qty is 10 pcs eing processed
    and delivery qty is 10 pcs - Completed
    Good Issue - 10 Pcs - Completed
    Invoice - 10 Pcs - Completed
    In spite of carrying out full delivery sale order status is still showing being processed.
    is there any configuration missing or is there any program to update the status.
    Kindly advice.
    Satish

    Hi Ankur,
    2 Doubts i have:
    1)
    In our case for the Item Category we have not maintained anything in Completion Rule however we have maintained Update Document Flow in Order to Delivery Copy Control.
    Our Document status shows as Completed in this case as well. Hence i do not know the Significance of maintaining Completion rule in item category.
    2) I have a order type which has Order Relevant Billing. The Copy Control for Order to Billing does not have any Update Document Flow Check Box. We are using a Service Material in this Order Type.
    After creating the Billing we still have Order status as Being Processed.
    Can you help in finding a solution to the above?
    Madhukar

  • Why the Sales Order is still being processed?

    Hi,
    This process is done: Sales Order (RE - Return) --> Return Delivery (Goods receipt) --> Billing
    Sold-to party wrongly entered in the Sales Order, so they wanted to close the Sales Order. They did Cancellation for Billing (VF11) and reversed the Goods receipt (VL09).
    Also, Reason for Rejection is put in the line item (VA02). However, the status of the Sales Order is still Being Processed instead of Completed.
    From the Data Flow, it states that order-related billing status is still open*. But the Billing documents and Accounting documents are Completed and Cleared respectively as seen from the Data Flow.
    How to close this Sales Order?
    Thanks.

    Dear Friend,
    If you want to close any particular order then go to order reason and give the reason and save it.
    The system will automatically close the order and would show processed and in the due lists also it would not appear.
    award points if helpful,
    regards,
    Amlan

Maybe you are looking for