Overheating issue - 90b error

Good evening, Since I bought my HP laptop I've had the overheating problem that I know is familiar to most HP users. My computer usually sounds like a helicopter and when running some more demanding programs, or even if it's just a hot day and I'm watching a video, it shuts down. Today I went to clean it up, following the usual advice of blowing air through the openings on the side and underneath, and when I came home and turned it on, the computer went down really fast and when turning it back on, this message showed up: The system has detected that a cooling fan is not operating correctly.Continued operation is not recommended and may cause unpredictable behavior that could result in random shutdown, data loss or possible system damage. The system will shut down in 15 seconds. To prevent shutdown and continue operation, press the Enter key now.System Fan (90b) This isn't the usual message I get when the computer overheats, also, for the first time since I took it out the store 4 years ago, it was dead silent. Can somebody please help me understand what happened and how can I fix it? Thank you so much in advance, I'll really appreciate your help

If you will provide the complete product number I can find that for you. It also depends on how your notebook is configured. Is your notebook one with a discrete graphics module or an interated builtin Intel or AMD graphics solution?
1. The full Model No. and Product No. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

System Fan 90b error message on startup

Hello!
My cooling fan is not working, this morning i turned on my PC and Error 90b of the Fan came on. How do i fix this?

Dear Customer, Welcome to HP Support Forum and we are glad to assist you It looks like you are having difficulties with regards to the Cooling Fan of your NetbookWe will surely assist you with this According to the message you have posted I suspect this is purely a hardware issue where in your getting "System Fan(90B) - The system has detected that a cooling fan is not operating correctly" message. This is a mechanical fault and the Cooling Fan on your Notebook and needs to be replaced before the Notebook starts up with an Overheating Issue. Causes/Reason for this Issue:1. Sometimes this is just because of Dust, Pet Animals Hair slowing down the fan Perform the below shown troubleshooting steps:Step 01. Turn OFF the NotebookStep 02. Un-plug the Power/AC Adapter and also remove the Battery tooStep 03. Press and Hold the Power Button of the Notebook for a full minuteStep 04. Now let's re-insert the battery back in and plug back the Power/AC AdapterStep 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOSStep 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOSStep 07. Now let's press Esc/Escape Key. Save Changes and Exit - YesStep 08. Now please wait till Unit loads Windows and then Shut down the Netbook againStep 09. You should clean all the Vents and Openings really good with a can of compressed air Note: If you are still getting the same error we need to replace the fan I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Netbook Fan replaced and serviced by an authorized HP Certified Engineer You can also Check your warranty Here to verify the warranty status Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on left to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

IMac 27" (Late 2012) Loud Fan and Overheating Issues, causing Hard Drive Failure

Hi all,
I'm having some serious overheating issues with my new iMac. Any help to help me solve this problem would be gladly appreciated since it's really beginning to bug me. Here's what's has happened:
I noticed in the first few hours of switching the iMac on that there was a short burst of very loud fan noise. This has been happening about once every two days since and every time I haven't been doing any heavy processing with the system. I've noticed that the main fan will spin, on average, at 1200rpm. Is that normal? The iMac is very well ventilated and sits right next to a window...
I have also boot camped the iMac with a copy of Windows 8 so I could run some fairly power-hungry games. I intentionally purchased a high end iMac (27" display, Intel Core i7 3.4GHz, Nvidia GeForce 680MX Graphics, 1TB Fusion drive) and expected the iMac to run games flawlessly. However, after a few days, I noticed that the CPU and GPU had shot up to a worrying 80°C whenever I ran power-hungry games, with a very loud hissing noise from the fan. After running games for about 10 minutes, the fan will stop hissing, causing the GPU and CPU to increase to 100°C. The iMac then fails and switches off unexpectedly without any warning. After analysing the Windows event logs, I received an event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
As this occurred about six times whilst I was testing my iMac's performance, I think my hard drive has now begun to fail - sometimes I will hear the hard drive make a click noise, about once every 5 seconds. Sometimes, the clicking noise causes OS X and Windows to run very slowly (even though minimal RAM is being used and nothing too intensive (Safari, Mail etc.) is being processed). Running Repair Disk and Repair Disk Permissions under OS X's recovery mode as well as a repair in chkdsk in Windows suggests that there were no problems with the hard drive. All I can do is wait a while for the clicking noise to stop, and then performance will increase. I have backed up everything externally.
I have also performed a reset of the SMC as well as the PRAM, which hasn't really helped.
Any help will be appreciated. I will gladly provide any extra logs etc. if they're needed.
Thanks so much,
Alex.

Alex Cummaudo wrote:
I've noticed that the main fan will spin, on average, at 1200rpm. Is that normal? The iMac is very well ventilated and sits right next to a window...
That's the default fan speed on iMacs, so there isn't any problem with this.
Alex Cummaudo wrote:
I have also boot camped the iMac with a copy of Windows 8 so I could run some fairly power-hungry games. I intentionally purchased a high end iMac (27" display, Intel Core i7 3.4GHz, Nvidia GeForce 680MX Graphics, 1TB Fusion drive) and expected the iMac to run games flawlessly. However, after a few days, I noticed that the CPU and GPU had shot up to a worrying 80°C whenever I ran power-hungry games, with a very loud hissing noise from the fan. After running games for about 10 minutes, the fan will stop hissing, causing the GPU and CPU to increase to 100°C. The iMac then fails and switches off unexpectedly without any warning. After analysing the Windows event logs, I received an event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
You must know that Boot Camp isn't compatible with Windows 8 and that Apple hasn't released drivers for Windows 8, so it can fail. Install Windows 7 inmediately until Apple launches updated drivers.
As it looks like the hard disk is damaged, I would take the Mac to an Apple Store. It's in warranty, so it should be repaired for free or you should receive a new one

Qosmio X870 GFX- Overheating issue

Hi!
My Notebook recently started to get bluescreens of death (nvlddmkm.sys errors) so i tried to fix them newer/other drivers, still just a small to no success.
So that has to be a overheating issue.
I tried to disassemble the chassis to clean the gfx fan+grill but I am afraid of damaging it.
I was only able to open the small side (RAM, SSD/HDD, OSD).
Is there any tutorial for the rest of the chassis?
PS: I could use a can of compressed air, but I think it will just blow the dust into the Laptop and not solving the problem right away.
Thanks in advance!

Hi
> Is there any tutorial for the rest of the chassis?
X870 does not seem to be an old notebook.
I assume warranty is still valid right?
In such case I would not recommend to disassemble the notebook.
This would cancel your warranty and there is a high risk of part damage.
In case this overheating issue isnt related to dust, I would recommend asking an technician for an check
> I could use a can of compressed air, but I think it will just blow the dust into the Laptop and not solving the problem right away.
I use the compressed air spray to clean my fans from time to time and this works perfectly.

The Game Center is "unable to load data due to network connectivity issues or errors".

The Game Center is "unable to load data due to network connectivity issues or errors".
My internet is fine: all other apps that do not rely on the Game Center work, as does my browser and other online functions; additionally, a friend's iPhone connects to his Game Center perfectly while he is sitting next to me.
Closing the Game Center app and then reopening it is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then logging back in, and then reopening the Game Center is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then reopening the Game Center app and logging back in from there is ineffective.
This issue has gone on for more than a month, and so the phone has gone through all variations of "turn it off then back on again, refresh the system, etc etc" that are the basic first suggestions for trouble shooting.
One game app, which required a Game Center profile to launch, stopped working entirely, and would return a message saying something like "connect to the Game Center". I eventually deleted it to free up space. Other games which can be linked to the Game Center to connect with friends simply fail to link, returning "Game Center unavailable". This is the aspect that is currently bothering me the most: I cannot play games with friends unless the app can also link to Facebook and connect to friends from there.
When I open the Game Center, I see the following screen. The bubbles float gently, and it seems as if I had the ability to update my "status". However doing so results in a message that has vanished once the app is reopened.
Upon tapping Games, either the bubble from the main screen or the option on the ribbon at the bottom, the following screen appears. Clicking on Challenges shows a message that achievements must be viewed to issue a challenge. Clicking achievements results in a message that games must be connected (and from my friend's phone I know I have several apps that should appear).
Upon tapping friends, it does show me a list of suggested friends pulled from Facebook, but attempting to send a friend request results in the following screen. After accepting the error box, the "send" button for the request is grayed out and unavailable regardless of adding or deleting friends and/or an accompanying message.
In short, the Game Center is completely unresponsive for no discernible reason, and this problem began with no warning and is now long term. Though my iPhone is older (a 4s), my friend's is even older (a regular 4) and works fine.

I am having the very same problem on my iPad running ios 7. All is fine on my iPhone it opens no problem - this is running on ios 8. I wish they would fix it.

Issuing an Error in Table Maintenance Event

Hi,
How can I issue an error in the table maintenance event without exiting the screen.
When an event is triggered (Before Save), it will perform a check in the data changed or created. It will issue an error when the changes are not correct. But when I press enter or click on the check button, it will exit the table maintenance screen.
What do I have to do in order to issue an error but will still go back to the table maintenance view.
Making the message as information or type I, will not work because it will still save.

Hi,
I came to the same problem, maybe this will help someone.
You can move check into view cluster event.
1. load the view
     PERFORM vcl_set_table_access_for_obj
          USING 'view'
          CHANGING error_flag.
2. assing to structure
     LOOP AT <vcl_total> INTO ls_view
3. perform check, set VCL_STOP which will stop saving and will display message
     VCL_STOP = 'X'.
     MESSAGE ....

Why apple has not fixed or atleast responded to users on LION Overheating issue???

I am having a MacBook Pro 13 bought last year.
I was happy with my snowleopard but, my friend sugested to upgrade to LION, paid all money and upgraded to LION,
Within a week overheating started, and it was difficult to keep it on my lap.
I have tried all the tricks mentioned in apple communities and other websites to solve this heat ,, sorry OVERHEATING issue .. but no benefit....
My MacBook Pro 13 had been thouroughly checked in apple serivce centre and no hardware issue had been found for the heat issue... so its LION only...
Also to mention that i use very less number of applications opened at a time, like firefox, chrome and itunes. So the heating is not due to usage of heavy applications .
After searching the whole interenet and apple community forum, i am surprised to see that there is no response from anyone in apple.. dont they periodically check what apple users are facing.. ?? dont they monitor the apple community so that they can fix the issues before it gets out of hand.....
I think Apple doesnt care on whats happening in Apple community portal, so we all are on our on...
I had a very good impression abt apple. until before upgrading to Lion... crap my MONEY IS GONEEE.
For anyone who got solution for this issue, other than the trick to delete Citrix plugin, disable spotlight etc, I am ready to welcome any new WORKING solution for this OVERHEATING...

@@ds store i am thinking the same now...
@@Eric. i did trying that 2 weeks back itself.. no improvement
@@OGELTHORPE i already have the iStat Pro. this we can monitor the heat. thats it.. this wont solve the issue.
hmmm dont know.. if i dont get a solution by today i am gonna go back to snow leopard...
Why to burn my aptop hardware due to the stupid LION's overheating....

Question on issuing a error message

HI All,
I am new to WDA.   I am developing a WDA application, on the first view I have a table and a button to go to the next view.
When the table is empty i need to issue a error message in the message area and the user should not be able to navigate further using the NEXT button.
I want to display this message before the user does some action i.e ( before the button trigger ).
Can some one help me how to achieve this.
Thanks,
Krishna

i need to issue a error message in the message area and the user should not be able to navigate further using the NEXT button.
now if ls_cn_input is INITIAL , u need to generate a error message and disable ur NEXT button
//for generating the error message
// this can be done by code wizard ( cntrl +f7) as well by selecting the radio button generate message and select the
// method *report_error_message*
*    DATA lv_message TYPE string .
**     get message manager
*    DATA lo_api_controller     TYPE REF TO if_wd_controller.
*    DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
*    lo_api_controller ?= wd_this->wd_get_api( ).
*    CALL METHOD lo_api_controller->get_message_manager
*      RECEIVING
*        message_manager = lo_message_manager .
**     report message
*    CALL METHOD lo_message_manager->report_error_message
*      EXPORTING
*        message_text   = 'Please enter data before exit .'.
// ur error message
the user should not be able to navigate further using the NEXT button.
// disable the NEXT button
u procced as follows :
1 create a context attribute of type WDY_BOOLEAN
2 bind this with ur button UI
3 nw using set_attribute method , set its value to ' ' ( ie blank)
again this cn be donr thru code wizrd by selecting read context node/attribute
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr.
*   navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   set single attribute
    lo_el_cn_node->set_attribute(
      EXPORTING
        name = `CA_ATTR`
        value = ' ' ).
// I have read ca_attr attribute under context node cn_node
// this attribute is binded to button UI
I hope it helps
rgds,
amit

90b error

When I turn on my laptop, which is an HP Pavilion 9-7131Uos, it states "system fan (90B) error an instructs me to go to this web page. What is wrong? How can it be fixed?

Clean the fan, if this does not get the error to go away, replace the fan.
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01657439

Video Card overheating issue

I'm having issues with my intel based iMac. Whenever I play World of Warcraft, I am having overheating issues with my video card. I get weird graphical errata, slowdown, freezing, and system crashes because of it. I have tried capping the fps through console command, downloaded an application to raise the minimum RPMs on my fans, and set up a boxfan behind my iMac.
Where are the air-intakes on the 24" iMac? I would like to try using a can of compressed air, in case it is clogged by dust or lint.
What further steps can I take if that doesn't work? If I take it to my nearest AASP, can it still be repaired under warranty, assuming it's a hardware issue?
intel iMac 24" Mac OS X (10.4.9) 2.16 GHz intel Core 2 Duo, 2GB RAM, 667MHz Bus Speed, 256MB NVIDIA GeForce 7600 GT

Welcome to Apple Discussions!
Run the hardware test that came with your machine:
http://docs.info.apple.com/article.html?artnum=303081
If nothing is detected, it is likely your problem is the RAM.
If something is detected, take it to the AASP and have them repair what is detected.
If the program you are using is PowerPC based, upgrade it to an Intel based program. That may solve the problem.

Issue Commn Error msg in TRY ,,,CATCH

Hi Experts,
I need to issue an error message in my code. I am writng this code below in SE38 for sending outbound data extract to PI(SAP Xi).
TRY.
Assign row
*loop at tzcaap into wa_zcaap.
      it_prxkna1-MT_tablename_EXTRACT-RECORD-ROW = itab2.
    it_prxkna1-MT_tablename_EXTRACT-RECORD-flag = itab1_fieldl1-filapcr.
      CALL METHOD meth_prxy->execute_asynchronous
        EXPORTING
          output = it_prxkna1.
      COMMIT WORK.
*endloop .
    CATCH cx_ai_system_fault .
      DATA fault TYPE REF TO cx_ai_system_fault .
      CREATE OBJECT fault.
      WRITE :/ fault->errortext.
ENDTRY.
If PI message interface is not set up i need to issue an error message.
please tell me how to do this?
thanks
Dan

Try this:
DATA fault TYPE REF TO cx_ai_system_fault .
data: gv_message type string.
CATCH cx_ai_system_fault into fault.
gv_message = fault->get_text( ).
WRITE :/ gv_message.

Unexpected issue of error message (output 00 001)

Dear Guru's
Please help me to come out from this issue , iam getting this massage in VL10b t-code
Unexpected issue of error message (output 00 001) massage VR555
Thanks
Caprin

Hi Srinath,
I noticed that you helped with the problem reported above.
I'm having the same problem and can not find what could be wrong.
When I try to create a delivery from the transaction VL10B, gives the following message:
Unexpected issue of error message (output 8B 213)
Message no. VR555
Could you help me?
Tks
Lucas

I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue.

I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue. When I go to the settlement site http://www.nvidiasettlement.com , I see that the last date of filing the claim expired which was 14th of March 2011. Is there any option remaining for the solution.
I want to get rid of this irritating overheating problem. Is there any option for replacement of NVIDIA GPU at my own cost even in some authorised service centre?
Regards,
Sujeet
[email protected]
+919266580154

Thank you for confirming, that this can in some cases solve the overheating.
And i agree with you, that it is not straight forward, and people has to be carefull

Production support - major issues or errors

Hi,
I am newly placed in SAP BI 7.0 .
I am into production support.
What are the most problematic issues or errors one face in Production support?
I have checked the forum and found some errors which are common and may occur regulary, but i would like to know about some of the biggest challenges and their solutions.
regards.
akshara
Please check the forum before posting
Edited by: Vikram Srivastava on Sep 25, 2010 8:42 PM

Hi akshara,
this could be one good link i found out because major issues with solution during production support have been given here..
http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
http://proradian.com/blog/
thanks ,
aravind

Unexpected issue of error message at time of STO Delivery

Hi,
I am trying to create STO Delivery by transaction by VL10B by I am getting error 'Unexpected issue of error message (Output VL 447).
Please help in order to solve issue.
Lait

Hi,
We have reuired changes in Note but problem was wrong Partner determonation procedure assigned in delivery type.

Overheating issue - 90b error

Similar Messages

Maybe you are looking for