OVM 3.0.3 importing templates issue

We are doing some testing with the JD Edwards EnterpriseOne environment and Oracle provides templates to use for Oracle VM. The instructions are a bit confusing but I am stuck at trying to import these templates.
Here are the templates I have hosted on a web server so I can import them into OVM.
http://<server>/templates2/E1_EL5U5_X86_64_PVM_10GB.tar.bz2 --> This is the only one I can import successfully. When completed it shows a system.img file and I can actually setup a VM and it boots up fine. (Oracle Linux 5 OS)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.0 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.1 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.2 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.3 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.4 (2.0 GB)
http://<server>/templates2/E1_ENT_898.4.1_X86_64.tar.bz2     (2.0 GB)
http://<server>/templates2/E1_HTML_898.4.1_WLS_X86_64.tar.bz2 (700 MB)
All the other templates I get an error when it is unpacking the template. The error reads
"Server error message: Template import error: Cannot find disk file: system.img
on server "44:45:4c:4c:52:00:10:48:80:51:ca:c0:4f:42:46:31" associated with object "cfgFile_0004fb000014000024d7f889441e1672""
Why is it looking for this system.img file? These other templates contain *.img files they just are not called system.img (ex E1_HTML.img, ...)
I should note I am using local storage for my repository (1 TB drive) but I haven't had any issues with that so far.
Thanks
Troy

user5933938 wrote:
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.0 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.1 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.2 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.3 (2.0 GB)
http://<server>/templates2/E1_DB_898.4.1_11GR2_X86_64.tar.bz2.part.4 (2.0 GB)
You need to combine all these files into a single .tar.gz file first -- follow the README on E-Delivery for the template to recombine and unpack the template. Unfortunately, OVM3 can't do the recombination for you.

Similar Messages

Unable to import template

I've been having trouble trying to import Oracle E-business DB template. The template is about 30GB in size, and it seems to fail after a long period of being "in progress"
I'm thinking that it's because my server pool cluster LUN is only 10GB big, and isn't large enough for the template, but I can't confirm that because the following debug makes no sense to me at all.
Details:-
Job Construction Phase
begin()
Appended operation 'Import Virtual Machine Template' to object 'cfgFile_0004fb0000140000248f15bc5d55a4f3'.
Appended operation 'Virtual Machine Cfg File Configure' to object 'cfgFile_0004fb0000140000248f15bc5d55a4f3'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (CREATED): [VirtualMachineCfgFile] cfgFile_0004fb0000140000248f15bc5d55a4f3
Operation: Import Virtual Machine Template
Operation: Virtual Machine Cfg File Configure
Object (CREATED): [VirtualMachineTemplate] 0004fb0000140000248f15bc5d55a4f3 (OVM_OL5U6_X86_64_EBIZ12.1.3_DB_VIS_PVM.tgz)
Job Running Phase at 00:31 on Wed, Jun 27, 2012
Job Participants: [34:35:33:33:33:30:43:4e:37:37:34:37:30:32:53:35 (ovm-dev-01), 34:35:33:33:33:30:43:4e:37:37:34:37:30:33:42:42 (ovm-dev-02)]
Actioner
Starting operation 'Import Virtual Machine Template' on object 'cfgFile_0004fb0000140000248f15bc5d55a4f3'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.JobFailureException: OVMAPI_5001E Job "1340722912926" Failed due to failure "(06/27/2012 12:07:44:415 PM)
Async operation failed on server: ovm-dev-01.
Object: cfgFile_0004fb0000140000248f15bc5d55a4f3,
PID: 16973,
Server error message: Template import error: Command: (tar xzf /OVS/Repositories/0004fb0000030000e10eb0322d2282c3/Templates/0004fb0000140000248f15bc5d55a4f3/tmp/OVM_OL5U6_X86_64_EBIZ12.1.3_DB_VIS_PVM.tgz --no-same-owner -C /OVS/Repositories/0004fb0000030000e10eb0322d2282c3/Templates/0004fb0000140000248f15bc5d55a4f3/tmp) failed: (2)
" on server "34:35:33:33:33:30:43:4e:37:37:34:37:30:32:53:35" associated with object "cfgFile_0004fb0000140000248f15bc5d55a4f3"
Wed Jun 27 12:07:44 CST 2012
at com.oracle.ovm.mgr.api.job.JobEngine.checkJobStatus(JobEngine.java:624)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:602)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineTemplateImport.action(VirtualMachineTemplateImport.java:68)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1012)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineCfgFileProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
FailedOperationCleanup
Starting failed operation 'Import Virtual Machine Template' cleanup on object 'cfgFile_0004fb0000140000248f15bc5d55a4f3'
Complete rollback operation 'Import Virtual Machine Template' completed with direction=cfgFile_0004fb0000140000248f15bc5d55a4f3
Rollbacker
Executing rollback operation 'Import Virtual Machine Template' on object 'cfgFile_0004fb0000140000248f15bc5d55a4f3'
Complete rollback operation 'Import Virtual Machine Template' completed with direction=DONE
Objects To Be Rolled Back
Object (CREATED): [VirtualMachineCfgFile] cfgFile_0004fb0000140000248f15bc5d55a4f3
Object (CREATED): [VirtualMachineTemplate] 0004fb0000140000248f15bc5d55a4f3 (OVM_OL5U6_X86_64_EBIZ12.1.3_DB_VIS_PVM.tgz)
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=10728 method=addTransactionIdentifier accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setName accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setFoundryContext accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=onPersistableCreate accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setLifecycleState accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setRollbackLifecycleState accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setName accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setFoundryContext accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=onPersistableCreate accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setLifecycleState accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setRollbackLifecycleState accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setJobAsset accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setVirtualMachineCfgFile accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setVirtualMachine accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=importVirtualMachineTemplate accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setSimpleName accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setAsset accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=configure accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setOrigin accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=setDescription accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=setAsset accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=configure accessLevel=6
Class=InternalJobDbImpl vessel_id=10728 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=10728 method=setAssociatedHandles accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=10728 method=setFailedOperation accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=nextJobOperation accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=10746 method=nextJobOperation accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=10751 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK

Hi,
Yo may verify if it is a storage issue by following steps below:
1. Import the template like you normally do...
2. While the import is in progress, ssh onto the OVS server (s), if your have clustered LUN, you may login to any one of the OVS server in the serverpool
3. df -h # to list the file system.
4. You may keep en eye on the utiliztion for file system fo holding template. If the usage for the file system go to 100% befor ethe import completed, you should be facing storage issue.
You mentioned that it took a long while before the import failed. This is because it take a while to fill up the 10GB mount point you have for the import.
I faced the similar issue recently. After increased my storage from 50GB to 300GB, I am all good with my import template.

OVM 2.2.2 import VirtualBox OVA

[root@ovm]# cat /etc/ovs-release
Oracle VM server release 2.2.2
Unpack OVA,
[root@ovm]# file VB.ova
VB.ova: POSIX tar archive
[root@ovm]# tar tvf VB.ova
-rw------- someone/someone 15691 2011-12-08 20:32:29 VB.ovf
-rw------- someone/someone 2917182464 2011-12-08 20:36:53 disk1.vmdk
-rw------- someone/someone 11493981184 2011-12-08 20:54:21 disk2.vmdk
[root@ovm]# tar xvf VB.ova
VB.ovf
VB-disk1.vmdk
VB-disk2.vmdk
VMDK details using "qemu-img",
[root@ovm]# ls -l *vmdk
-rw------- 1 root root 2917182464 Dec 8 20:36 VB-disk1.vmdk
-rw------- 1 root root 11493981184 Dec 8 20:54 VB-disk2.vmdk
[root@ovm ]# qemu-img info -f vmdk VB-disk1.vmdk
disk1.vmdk
file format: vmdk
virtual size: 10G (10737418240 bytes)
disk size: 2.7G
[root@ovm]# qemu-img info -f vmdk VB-disk2.vmdk
image: disk2.vmdk
file format: vmdk
virtual size: 60G (64424509440 bytes)
disk size: 11G
Attempt using "qemu-img" to convert VMDK to raw,
[root@ovm# qemu-img convert -f vmdk -O raw VB-disk1.vmdk disk1.img
qemu-img: error while reading
Install VirtualBox on WinXP 32-bit laptop. Share the VMDK files using Samba.
Attempt "VBoxManage clonehd" of "VB-disk1.vmdk",
V:\>"C:\Program Files\Oracle\VirtualBox\VboxManage" clonehd VB-disk1.vmdk disk1.img --format raw
VBoxManage.exe: error: The medium 'V:\VB-disk1.vmdk' can't be used as the requested device type
VBoxManage.exe: error: Details: code E_FAIL (0x80004005), component Medium, interface IMedium, callee IUnknown
Context: "OpenMedium(Bstr(pszFilenameOrUuid).raw(), enmDevType, AccessMode_ReadWrite, fForceNewUuidOnOpen, pMedium.asOutParam())" at line 210 of file VBoxManageDisk.cpp
Update UUID of VMDK,
V:\>"C:\Program Files\Oracle\VirtualBox\VboxManage" internalcommands sethduuid VB-disk1.vmdk
UUID changed to: 73a7de22-6846-4868-9cd3-94bbf589d940
V:\>"C:\Program Files\Oracle\VirtualBox\VboxManage" clonehd VB-disk1.vmdk disk1.img --format raw
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Clone hard disk created in format 'raw'. UUID: faf96692-93ed-477e-9d52-1ade05009
b60
V:\>"C:\Program Files\Oracle\VirtualBox\VboxManage" internalcommands listpartitions -rawdisk disk1.img
Number Type StartCHS EndCHS Size (MiB) Start (Sect)
1 0x83 0 /1 /1 12 /254/63 101 63
2 0x8e 13 /0 /1 1023/254/63 10134 208845
[root@ovm]# file disk1.img
disk1.img: x86 boot sector; partition 1: ID=0x83, active, starthead 1, startsector 63, 208782 sectors; partition 2: ID=0x8e, starthead 0, startsector 208845, 20755980 sectors, code offset 0x48
[root@ovm]# fdisk -l disk1.img
last_lba(): I don't know how to handle files with mode 8180
You must set cylinders.
You can do this from the extra functions menu.
Disk disk1.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
disk1.img1 * 1 13 104391 83 Linux
disk1.img2 14 1305 10377990 8e Linux LVM
Partition 2 has different physical/logical endings:
phys=(1023, 254, 63) logical=(1304, 254, 63)
No UUID issues with "VB-disk2.vmdk" proceed with "clonehd",
V:\>"C:\Program Files\Oracle\VirtualBox\VboxManage" clonehd VB-disk2.vmdk disk2.img --format raw
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Clone hard disk created in format 'raw'. UUID: de21cd38-494d-49df-81b4-c3fd3c8c67ae
V:\>"C:\Program Files\Oracle\VirtualBox\VboxManage" internalcommands listpartitions -rawdisk disk2.img
Number Type StartCHS EndCHS Size (MiB) Start (Sect)
1 0x8e 0 /0 /2 1023/254/63 61439 1
[root@ovm]# file disk2.img
disk2.img: LVM2 (Linux Logical Volume Manager) , UUID: VbrZ2qmX6kQU2os4ye7xncrd4y4NEe5
[root@ovm]# fdisk -l disk2.img
last_lba(): I don't know how to handle files with mode 81e4
You must set cylinders.
You can do this from the extra functions menu.
Disk disk2.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
disk2.img1 1 7833 62914559+ 8e Linux LVM
Partition 1 has different physical/logical endings:
phys=(1023, 254, 63) logical=(7832, 127, 39)
Configure HVM "vm.cfg",
# (H)ardware (V)irtual (M)achine configuration
# /etc/xen/xmexample.hvm
kernel = '/usr/lib/xen/boot/hvmloader'
builder = 'hvm'
memory = '4096'
device_model ='/usr/lib/xen/bin/qemu-dm'
# PXE boot
#bootloader = '/usr/bin/pypxeboot'
#bootloader = '/usr/bin/pygrub'
# Virtual block device configuration using file:
# dd if=/dev/zero of=/$VM_PATH/$VM_NAME/System.img bs=1M count=$MB
# disk = [ 'file:/$VM_PATH/$VM_NAME/System.img,ioemu:hda,w', ]
# Configuration using physical disk logical volume:
# lvcreate --size ${GB}G --name $VM_NAME $VG_NAME
# disk = [ 'phy:/dev/$VG_NAME/$VM_NAME,xvda,w',]
# CDROM configuration using file:
# disk = [ 'file:/$BOOT_ISO_NAME,hdc:cdrom,r', ]
disk = [ 'file:/OVS/disk1.img,ioemu:hda,w', 'file:/OVS/disk2.img,ioemu:hdb,w', ]
# Domain name
name = "foobar"
# Networking
# Network bridge status:
# /etc/xen/scripts/network-bridge status
# 'bridge' should be proper interface e.g. xenbr0
vif = ['type=ioemu, bridge=xenbr0']
# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
boot = "cdn"
# Enable HV VNC console
vnc=1
vncunused=1
vnclisten="0.0.0.0"
vncpasswd=''
sdl=0
Update "grub.conf" and "device.map" using loopback mount of "disk1.img" boot partition,
[root@ovm]# mkdir boot
[root@ovm]# lomount -diskimage disk1.img -partition 1 boot
Excerpt "grub.conf",
[root@ovm]# cat boot/grub/grub.conf
title Oracle Linux Server (2.6.32-200.13.1.el5uek)
root (hd0,0)
kernel /vmlinuz-2.6.32-200.13.1.el5uek ro root=/dev/VolGroup00/LogVol00
Excerpt "Oracle Linux 5.7 Release Notes",
"Oracle Linux 5.7 ships with the following kernel packages
Unbreakable Enterprise kernel [kernel-uek-2.6.32-200.13.1.el5uek
Installed and booted by default"
Excerpt "Oracle Linux 5.7 Release Notes",
"Known Issues
Hardware virtualized (HVM) guests with Unbreakable Enterprise Kernel always use paravirtualized (PV) drivers
Unbreakable Enterprise Kernel version kernel-uek-2.6.32-100.34.1 adds support for paravirtualized drivers in a HVM guest on Oracle VM. Starting with this kernel version, the default is to present only paravirtualized drivers when running in a hardware virtualized guest. To run kernel-uek --including the drivers-- fully hardware virtualized, an additional kernel boot parameter "xen_emul_unplug=never" must be added to the boot parameters in /etc/grub.conf:
kernel /vmlinuz-2.6.32-100.34.1.el5uek ro root=/dev/VolGroup00/LogVol00 xen_emul_unplug=never
Adding this kernel boot parameter makes the kernel also present the emulated drivers as it did before (e.g. the 8139cp network driver). "
Update "grub.conf" to boot non-UEK kernel,
[root@ovm]# grep ^default boot/grub/grub.conf
default=1
[root@ovm# cat boot/grub/device.map
# this device map was generated by anaconda
(hd0) /dev/sda
[root@ovm]# cat boot/grub/device.map
# this device map was generated by anaconda
(hd0) /dev/hda

I have had success importing VirtualBox images of OEL 6.4, but I am unable to import Solaris 11 VMs to OVM. When I import a Solaris 11 VM, the grub menu comes up. I select Solaris 11 and press enter. The OS begins to boot and progresses through to this point:
SunOS Release 5.11 Version 11.1 64-bit
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
It is at this point that console window in OVM goes black and OVM registers the shutdown of the VM. I have not been able to get the VM to boot any further through the sequence.
Can you give me some grub configuration changes to try?

Email Alert Template Issue - List Alerts (Alert Me) emails not using customized XML alert template

We have recently customized the XML alerts template (AlertTemplates.xml) for our site collection in SharePoint 2010 to exclude specific fields in the email when users who have subscribed using the "Alert Me" feature. We have renamed the
custom alerts XML file and loaded the custom template in the following directory (%ProgramFiles%\Common Files\Microsoft Shared\Web server extensions\14\TEMPLATE\XML) and restarted IIS. Once users subscribe to the alerts using the list "alert me"
function they received the customized email as intended.
We needed to auto-subscribe users to the email alerts so what we did was use a powershell script to add users to the alert subscriptions using the script shown below:
Import-Csv D:\Temp\filename.csv | ForEach-Object{
$webUrl=$_.WebUrl
$listTitle=$_.List
$alertTitle=$_.AlertTitle
$subscribedUser=$_.SubscribedUser
$alertType=$_.AlertType
$deliveryChannel=$_.DeliveryChannel
$eventType=$_.EventType
$frequency=$_.Frequency
$oldAlertID=$_.ID
$web=Get-SPWeb $webUrl
$testAlert = $web.Alerts | WHERE { $_.ID -eq $oldAlertID }
IF ($testAlert) {
$web.Alerts.Delete([GUID]$oldAlertID)
Write-Host Old alert $oldAlertID deleted. -Foregroundcolor Cyan
$list=$web.Lists.TryGetList($listTitle)
$user = $web.EnsureUser($subscribedUser)
$newAlert = $user.Alerts.Add()
$newAlert.Title = $alertTitle
$newAlert.AlertType=[Microsoft.SharePoint.SPAlertType]::$alertType
$newAlert.List = $list
$newAlert.DeliveryChannels = [Microsoft.SharePoint.SPAlertDeliveryChannels]::$deliveryChannel
$newAlert.EventType = [Microsoft.SharePoint.SPEventType]::$eventType
$newAlert.AlertFrequency = [Microsoft.SharePoint.SPAlertFrequency]::$frequency
if($frequency -ne "Immediate"){
$AlertTime=$_.AlertTime
$newAlert.AlertTime=$AlertTime
$newAlert.Update()
Write-Host Created $newAlert.Title for $subscribedUser . -Foregroundcolor Cyan
} ELSE {
Write-Host Alert $alertTitle for $subscribedUser already done. Moving on. -Foregroundcolor Magenta
When we ran the script and added the users and restarted the service, all users who were auto-subscribed via this method get the email without the customizations that were done in teh custom alert template. All users who manually subscribed on their
own to the list using the "Alert Me" function would get the customized email.
Does anyone know why users who manually subscribe to the alerts get the customized email, and users who were auto-subscribed using the powershell script do not get the customized email and get the standard generic email template?

Hi ,
According to your code, it create a new alert using SPUser.Alerts.Add() method. For this method, it will create a new alert based on the predefined alert template by default.
If you only assigned the custom alert template to the list, users who manually subscribe to the alerts get the customized email, but users who were auto-subscribed using the PowerShell script get the standard
generic email template.
For your issue, you can set the new alert ‘s alert template:
http://social.technet.microsoft.com/Forums/en-US/1b19c12f-fc37-48cf-8b59-6c09f095dc23/custom-alert-email-templates-issue-list-alerts-emails-not-using-customized-xml-alert-template?forum=sharepointgeneralprevious
Here is a good blog you can have a look:
http://blogs.msdn.com/b/sharepointdeveloperdocs/archive/2007/12/07/customizing-alert-notifications-and-alert-templates-in-windows-sharepoint-services-3-0.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

There is no 'Position' field on the advanced Customer Import template - how do i add this?

Hi All ,
I'm sure im not the first one to encounter this issue but i dont see another question similar .
My client would like to also add the customer's 'Position' to the CRM record when they upload the spreadsheet. IE Bob Smith, Managing Director....
There is no column for 'Position' - How would you suggest going about doing this?
Thanks .

Hi,
If you have generated this field via Admin > CRM > Extend CRM Database, then when going to CRM > Customers > Import Contacts (Advanced), near the bottom of the page, you'll see a drop-down ("Choose CRM Form if you wish to import custom information for contacts") from where you can choose to include the respective field in the import template.
Kind Regards,
Alex

Prime Infrastructure importing templates

Hi all,
We have an existing WCS setup (7.0.240.0).
I have built up a Prime Infrastructure server running release 1.3.0.20.
Originally I was going to look at migrating our existing WCS configure but the two stage process (WCS -> NCS -> Prime) looked prone to errors. Dediced to skip it and concentrate and building up from blank slate.
The only exception was the floorplan maps for Wifi, I was able to export these straight from WCS to Prime without any hicups.
I then added our main WLC and assigned the APs to the correct maps.
Sweet!
Now I would like to get the templates going for our WLCs as i have a couple more to deploy. The issue is that I dont want to manually configure templates in Prime. WCS had the ability to import templates from an existing WLC, a goldern WLC config. I cant seem to find any doco indicating this ability. Anyone come across something similar or another way I might acheive?
Cheers
Chris

From the Classic Theme:::
Go to Configure> Controllers, Select the Controller(s), select Discover Templates from Controllers
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/ctrlcfg.html#wp2147938

Is it possible import templates manually, i.e without VM Manager

Hi
In OVM 3.0.3 is it possible import templates using command line? I have look throguh the documentation but VM Manager is used always when dealing with templates.
Also is it possible manage OVM 3.0.3 with VM Manager 3.0 or 2.2?
Thanks a lot

keyurPatel wrote:
I am trying to setup a OVM 3.0.3 on my laptop. I dont have any additional server. so, I thought, I will make one guest, install OVMM there and then use manger for rest of the work. How to do that?You can't -- you need the Manager up and running before Oracle VM is able to create guests. You also need at least two hard drives for Oracle VM, something else that a laptop probably won't have. With Oracle VM 3.1, you'll be able to run both Server and Manager in VirtualBox, though.

Multiple Images Import template?

Hi folks,
First of all, I cannot find the link to product import templates anywhere after an hour's search. That is just wrong!
Secondly, as I remember seeing one, it doesn't offer multiple views of a single product. But i've seen stores with multiple product views.
Can someone direct me to the proper database templates and import files for adding multiple images to a product?
TIA

Hi Liam, So are the poplets connected to the product database and is there a way to bulk upload them with the csv file? Or does this have to be done individually by hand? If there isn't a place for the additional items in the csv file, then it seems they aren't directly linked in the product database?
I think I found the template before when I was doing research for the BC product in the product information area and not in the actual product import area. I couldn't see the download template until after I pressed product import. That was very deep in the system, with multiple clicks to get there.

Text field does not expand in imported template

Hi Guys,
I need to import a .pdf document template and work from there. Some of the fields will recieve text values that are of a length that is not known at design time. Therefore, the field needs to be able to grow. I cannot get this to work.
If I do the same procedure in a form from I create from scratch (wrapping text field in in subform, set subform as flowed etc etc) this does seem to work. But, when I apply the same steps in the template I just CANNOT get the text fields to grow dynamically.
Is it therefore only possible to design expandable fields in forms you build from scratch in Adobe LuveCycle designer or are there steps you can recommend for achieveing the same thing when working from an imported template?
Kind Regards,
Christiaan

So it that likely to change in the foreseeable future?

Does IIS Reset stop/start or IIS Restart fix template issues? See photos.

I have been having major template issues over the past couple of weeks where several templates give me access denied. I have been in contact with Microsoft about the issue, but after 2 days and 5 hours on the phone, the issue still cannot be resolved.
I then tried to use old sites that had the templates and "Save Site as Template". The new template that was saved are stored in the Solutions Gallery (template is "activated").
I ran the create new site process and chose the new template that I saved.
The template looked like this last week,
Now the template looks like this today.
In between last week and this week, I did an SP2 installation to Project Server 2010/SharePoint 2010.
I also did an IIS Reset /stop and IIS reset/ start
I also went into the IIS Manager on the central administration server and clicked "Restart".
This is a very time sensitive issue, and want to know how I accidentally resolved the issue. It's very weird that any of these above would change the template, but somehow it did. I do not want to reset IIS if I do not have to. If anyone has any idea on
how this could have gotten resolved it would be greatly appreciated.

Hi TR,
Not sure if iisreset always fixes this issue.
Sorry for my misleading description, I thought that there was a possiable that some js/css files weren't loaded in the browser randomly for new site created based on the template, so I think maybe some js/css files customized
and referenced in the orginal site (or in new site) may need to be checked-in and published.
Now I think is it possible that the issue is related to js/css load sequence in browser? or is it browser compatible issue(maybe not based on iisreset)?
Or you may try add new site in trusted site in IE see if it helps.
Also check if browser F12 developer tool could provide some useful information.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Import template for the intrastat in 2007a

Is there an import template for the intrastat in 2007 for items and B.Ps - have seen the intrastat wizard option - but is there not a DTW option?

Dear Sam,
From Intrastat version 2007A on, the BNITMDV and BNBPDV are no longer UDTs but UDOs (User defined objets).
Offically, DTW does not support importing UDOs but supports UDTs.
As far as workaround concerned, if the UDO performs the same as UDT, that means it have only a table and doesn't belong to any other object and doesn't have sub-objects ( sub-table ), DTW can imports it likes UDT.
The reason is that DTW is based on DI API and it only supports the objects which DI API exposes and supports.
Regarding BNBPDV, it is relevant to BusinessPartners object, at present, DTW can not support BNBPDV, so does BNITMDV.
Regards, Krisztiá

Importing templates (shared components)

Hello,
I'm having problems running the .sql script to import templates - anyone else come across this before I go in and edit the file? I run the script, enter the parameters and then get :
sp2-0734: unknown command beginning "PAGE.STYLE..." rest of line ignored.
portal 3.0.8.9.8, db 8.1.7.0
thanks,
Alan.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Alan Dickson ([email protected]):
Sorry, may have not been clear, I know how to do this, it's just that when I do run it (using sqlplus or the appimp.cmd then I get the error within the generated script itself.
Anyone else got any ideas/seen this? I don't want to have to copy/paste lots of templates...<HR></BLOCKQUOTE>
Had a similar problem,...after looking at it, it seems that the placement of #PAGE.STYLE# at the beginning of the line caused the problem. My fix was to indent the #PAGE.SYTLE# and everything was fine.

How to export and import template and dimensions mumbers between 2 appset

hi expert:
      1.How to export and import template and dimensions mumbers between two application set
      2. In Our project Requirement ,
          we moust be develop our planning in develop evn application set , distribute template and
          dimension mumbers to another Qas applications set .
     3. how can i   package our template in dev application set and Anti-package to Qas application set
         with BPC system tools?
     4. This Requirement is from our Security control Dep. we must be change template version or dimension
          mumber with system tools.
     5.thanks for your help!

Ian,
So, in other words, you're saying that it's not possible to export directly objects (like smart albums) that reside outside of projects?
I know, for example, you can "export" anything created inside a folder by dragging and dropping the folder to another library; but you then have to rebuild the library to get the new folder and its contents to be recognized. For my library, this takes too much time to do.

ACS 5.1 Import Template gives File Format Validation Failed

Hi folks,
Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached.
I also tried to change the header so its all in one column, but with same result.
Please advise. Thanks.

I haven't had the time to drill on this completely but looks like your file is getting mangled as it got downloaded and edited
I extracted your file and put in a text editor. looks like this
name:String(64):Required,description:String(1024),subnets:Subnets(a.b.c.d/m;"...):Required,""supportRADIUS:Boolean(true,false):Required"",radiusSecret:String(32),""supportTACACS:Boolean(true,false):Required"",tacacsSecret:String(32),""singleconnect:Boolean(true,false)"",""legacyTACACS:Boolean(true,false)"",Location:String(256),Device Type:String(256)"
The quote characters seem duplicated and there is an extra quote in Subnets header field that should be removed
Can't guaranetee anything but worth getting into a text editor and trying to clean it up

Import template from closing cockpit

Hi all,
While importing template from closing cockpit from one client(Development System) to another client (Quality System), the "Variant ", "Notes" & "Office Document" added to task are not getting imported to receiving client(Quality System).
Is there any other procedure or OSS Note to be implemented.
Thanks & Regards,
vijay

There are many things need to be corrected for Closing Cockpit. And I think SAP is currently working on it they released many notes on July 08, 15 and 17.
May be for now you cannot transport with doc, notes and variants.
Thanks
Simar

OVM 3.0.3 importing templates issue

Similar Messages

Maybe you are looking for